Harris XL Series Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Operator’s Manual
14221-1850-2000
Rev. A, November 2019
XL Series Mobile Radios
14221-1850-2000, Rev. A
2
MANUAL REVISION HISTORY
REV.
DATE
REASON FOR CHANGE
-
Sep/19
Initial release.
A
Nov/19
Updated to add XL-200M and XLP R9A information.
Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for
completeness, technical accuracy, and organization. You can assist in this process by submitting your comments and suggestions to the
following:
Harris Corporation fax your comments to: 1-434-455-6851
PSPC Business or
Technical Publications e-mail us at: PSPC
_
TechPubs
@
harris.com
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
ACKNOWLEDGEMENT
This device is made under license under one or more of the following US patents: 4,590,473; 4,636,791; 5,148,482; 5,185,796; 5,271,017;
5,377,229; 4,716,407; 4,972,460; 5,502,767; 5,146,497; 5,164,986; 5,185,795; 5,226,084; 5,247,579; 5,491,772; 5,517,511; 5,630,011;
5,649,050; 5,701,390; 5,715,365; 5,754,974; 5,826,222; 5,870,405; 6,161,089; and 6,199,037 B1. DVSI claims certain rights, including
patent rights under aforementioned U.S. patents, and under other U.S. and foreign patents and patents pending. Any use of this software or
technology requires a separate written license from DVSI.
The Advanced Multi-Band Excitation implementation 2 (AMBE+2) voice coding Technology embodied in this product is protected by
intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology
is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to
extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-
readable form. U.S. Patent Nos. #5,870,405, #5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656,
#5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.
CREDITS
Harris, VIDA, NetworkFirst, EDACS, and OpenSky are registered trademarks of Harris Corporation. TECHNOLOGY TO CONNECT,
INFORM AND PROTECT is a trademark of Harris Corporation.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Motorola is a registered trademark of Motorola, Inc.
AMBE is a registered trademark and IMBE, AMBE+, and AMBE+2 are trademarks of Digital Voice Systems, Inc.
Wi-Fi is a registered trademark of
Wi-Fi Alliance Corporation.
All brand and product names are trademarks, registered trademarks, or service marks of their respective holders.
NOTICE!
The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval from the U.S.
Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export Administration Regulations.
Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may not be copied
or reproduced by any means or disseminated or distributed without the express prior written permission of Harris Corporation, PSPC
Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501.
Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs,
alterations or substitutions of recommended parts made by the user to this equipment not approved by the manufacturer could void the user's
authority to operate the equipment in addition to the manufacturer's warranty.
This product conforms to the European Union WEEE Directive 2012/19/EU. Do not dispose of this product in a public
landfill. Take it to a recycling center at the end of its life.
Harris products comply with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment (RoHS) Directive.
This manual is published by Harris Corporation without any warranty. Improvements and changes to this manual necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or equipment, may be made by Harris Corporation at any time and without notice.
Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Harris Corporation.
Copyright © 2019 Harris Corporation.
14221-1850-2000, Rev. A
3
TABLE OF CONTENTS
Section Page
1. REGULATORY AND SAFETY INFORMATION ............................................................................ 7
1.1 SAFETY SYMBOL CONVENTIONS ........................................................................................ 7
1.2 RF ENERGY EXPOSURE AWARENESS AND CONTROL INFORMATION FOR FCC
OCCUPATIONAL USE REQUIREMENTS............................................................................... 7
1.2.1 Federal Communications Commission Regulations ....................................................... 8
1.3 COMPLIANCE WITH RF EXPOSURE STANDARDS ............................................................ 8
1.3.1 Mobile Antennas ............................................................................................................. 9
1.3.2 Approved Accessories ................................................................................................... 10
1.3.3 Contact Information ...................................................................................................... 10
1.4 REGULATORY APPROVALS ................................................................................................. 10
1.4.1 Applicable Type Acceptance/Certification Numbers .................................................... 10
1.4.2 FCC Part 15 ................................................................................................................... 11
1.4.3 Industry Canada ............................................................................................................. 11
1.5 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING INFORMATION . 11
1.6 COMMON HAZARDS .............................................................................................................. 11
1.7 SAFE DRIVING RECOMMENDATIONS ............................................................................... 12
1.8 OPERATING RULES AND REGULATIONS ......................................................................... 13
1.9 OPERATING TIPS .................................................................................................................... 13
2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET CURITÉ ....................................... 14
2.1 CONVENTIONS SUR LES SYMBOLES DE SÉCURITÉ ...................................................... 14
2.2 RENSEIGNEMENTS SUR UNE EXPOSITION À L’ÉNERGIE DES RF .............................. 14
2.2.1 Renseignements Sur Le Contrôle Et La Sensibilisation À L’énergie Des RF Pour Les
Exigences D’une Utilisation Professionnelle De La FCC ............................................. 14
2.2.2 glements de la Federal Communications Commission (« Commission fédérale des
communications » aux États-Unis) ................................................................................ 15
2.3 CONFORMITÉ AUX NORMES D’EXPOSITION AUX RF ................................................... 16
2.3.1 Antennes Mobiles .......................................................................................................... 18
2.3.2 Accessoires Approuvés ................................................................................................. 18
2.3.3 Coordonnées .................................................................................................................. 18
2.4 INTERFÉRENCE DES RADIOFRÉQUENCES ....................................................................... 18
2.4.1 Partie 15 de la FCC ....................................................................................................... 18
2.4.2 Industrie Canada ............................................................................................................ 18
2.5 RENSEIGNEMENTS SUR LA FORMATION SUR LA SANTÉ ET LA SÉCURITÉ AU
TRAVAIL .................................................................................................................................. 19
3. INTRODUCTION ................................................................................................................................ 20
3.1 DESCRIPTION .......................................................................................................................... 20
3.1.1 Vehicle Communications Hub (VCH) .......................................................................... 20
3.1.2 XL Control Head ........................................................................................................... 20
3.2 KEYPAD MOBILE MICROPHONE (KMM) .......................................................................... 21
3.3 CLEANING ............................................................................................................................... 22
3.4 OPTIONS AND ACCESSORIES .............................................................................................. 22
3.5 RELATED PUBLICATIONS .................................................................................................... 24
4. BASIC OPERATION ........................................................................................................................... 25
4.1 RADIO CONTROLS ................................................................................................................. 25
4.2 BEFORE FIRST USE ................................................................................................................ 27
4.3 POWER ON AND SET VOLUME ........................................................................................... 27
4.4 VIDA
®
ID ................................................................................................................................... 27
14221-1850-2000, Rev. A
4
TABLE OF CONTENTS
Section Page
4.4.1 User Login ..................................................................................................................... 28
4.4.2 Provisioning .................................................................................................................. 28
4.5 RADIO DISPLAYS ................................................................................................................... 28
4.6 STATUS MESSAGES ............................................................................................................... 30
4.7 PREDEFINED MENU LAYOUTS ........................................................................................... 30
4.8 MENU ........................................................................................................................................ 33
4.9 ALERT TONES ......................................................................................................................... 37
4.10 SELECT ZONE/SYSTEM ......................................................................................................... 38
4.11 SELECT GROUP/CHANNEL ................................................................................................... 39
4.12 GROUP CALLS ......................................................................................................................... 39
4.12.1 Transmit a Group Call ................................................................................................... 39
4.12.2 Receive a Group Call .................................................................................................... 40
4.13 INDIVIDUAL CALLS ............................................................................................................... 40
4.13.1 Transmit an Individual Call ........................................................................................... 40
4.13.2 Receiving an Individual Call ......................................................................................... 42
4.14 USER PROFILES ...................................................................................................................... 43
4.15 NOISE CANCELLATION ........................................................................................................ 44
4.15.1 Enable Noise Cancellation ............................................................................................ 44
4.15.2 Using Noise Cancellation .............................................................................................. 44
4.15.3 The Effect of Distance from the Microphone ................................................................ 45
4.15.4 Voice Versus Noise Reference Microphone ................................................................. 45
4.16 ENABLE/DISABLE ENCRYPTION ........................................................................................ 45
4.17 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY) ................................................. 46
4.18 USE TALKAROUND TO BYPASS REPEATER (ANALOG AND P25 CONVENTIONAL
ONLY) ....................................................................................................................................... 47
4.19 CALL ALERT (PAGE) .............................................................................................................. 48
4.19.1 Send Alert ...................................................................................................................... 48
4.19.2 Receive Alert ................................................................................................................. 49
4.20 TELEPHONE INTERCONNECT ............................................................................................. 49
4.21 DTMF ......................................................................................................................................... 50
4.22 START SCAN ............................................................................................................................ 50
4.23 STOP SCAN ............................................................................................................................... 52
4.24 MONITOR AND SQUELCH TYPES (CONVENTIONAL ONLY) ........................................ 53
4.25 NUISANCE DELETE ................................................................................................................ 53
4.26 FAILSOFT (P25 TRUNKED) ................................................................................................... 55
4.27 EMERGENCY OPERATION .................................................................................................... 55
4.27.1 Declaring an Emergency Call ........................................................................................ 55
4.27.2 Receiving an Emergency Call ....................................................................................... 56
4.27.3
Stealth Emergency ......................................................................................................... 56
4.28 MDC-1200 (ANALOG CONVENTIONAL ONLY) ................................................................. 56
4.28.1 Normal PTT Operation .................................................................................................. 56
4.28.2 MDC PTT ID Receive Handling ................................................................................... 56
4.28.3 Emergency Declaration ................................................................................................. 57
5. ADVANCED OPERATIONS .............................................................................................................. 58
5.1 VIEW/CHANGE PERSONALITIES ........................................................................................ 58
5.1.1 View Personalities ......................................................................................................... 58
5.1.2 Change Active Personality ............................................................................................ 59
5.2 SITUATIONAL AWARENESS (SA) P25 CONVENTIONAL ONLY ................................. 60
14221-1850-2000, Rev. A
5
TABLE OF CONTENTS
Section Page
5.3 USER DEFINED ZONES .......................................................................................................... 61
5.4 MIXED SYSTEM ZONE .......................................................................................................... 63
5.5 CH INFO MENU ....................................................................................................................... 63
5.6 AUDIO SETTINGS ................................................................................................................... 64
5.7 DISPLAY SETTINGS ............................................................................................................... 65
5.8 GPS SETTINGS ......................................................................................................................... 67
5.9 POSITION INFO ....................................................................................................................... 68
5.10 BLUETOOTH ............................................................................................................................ 68
5.10.1 Enable Bluetooth ........................................................................................................... 68
5.10.2 Pair Devices ................................................................................................................... 69
5.11 CLOCK SETTINGS ................................................................................................................... 70
5.12 SELECT LANGUAGE .............................................................................................................. 71
5.13 SET UP SCAN ........................................................................................................................... 71
5.13.1 Default, Priority 1, and Priority 2 Channels .................................................................. 71
5.13.2 Trunked/Conventional Scanning ................................................................................... 72
5.13.3 Vote Scan (Analog and P25 Conventional Only) .......................................................... 72
5.13.4 Edit Scan List ................................................................................................................ 73
5.13.5 Set or Remove Priority 1 and Priority 2 Channels ........................................................ 74
5.13.6 Custom Scan Lists ......................................................................................................... 75
5.13.7 Wide Area System Scan (P25 Trunked) ........................................................................ 76
5.13.8 Site Lock ....................................................................................................................... 77
5.14 RADIO STATUS ....................................................................................................................... 78
5.15 RADIO MESSAGE .................................................................................................................... 78
5.16 RADIO TEXTLINK ................................................................................................................... 79
5.16.1 Radio TextLink Messages ............................................................................................. 79
5.16.2 Radio TextLink Forms .................................................................................................. 80
5.16.3 View Received Messages .............................................................................................. 81
5.17 FAULTS/ALERTS ..................................................................................................................... 81
5.18 TONE ENCODE ........................................................................................................................ 82
5.19 ENCRYPTION ........................................................................................................................... 83
5.19.1 Create and Load Keys ................................................................................................... 83
5.19.2 Zeroize Keys from Radio .............................................................................................. 83
5.19.3 Protected Keys ............................................................................................................... 83
5.19.4 Global Encryption ......................................................................................................... 84
5.19.5 Select Keyset ................................................................................................................. 85
5.19.6 View Key List ............................................................................................................... 85
5.19.7 Delete Individual Keys .................................................................................................. 86
5.19.8 OTAR Configuration .....................................................................................................
86
5.20 P25 CONVENTIONAL FALLBACK ....................................................................................... 87
5.21 STEALTH MODE ..................................................................................................................... 87
6. PROGRAMMING ................................................................................................................................ 88
6.1 PROGRAMMING VIA RPM2 .................................................................................................. 88
6.2 EDIT CHANNEL (ANALOG AND P25 CONVENTIONAL ONLY) ..................................... 88
6.3 OTAP ......................................................................................................................................... 90
6.4 PROGRAMMABLE BUTTONS ............................................................................................... 91
6.5 PROGRAMMABLE ICONS ..................................................................................................... 93
6.6 DATA ONLY CONFIGURATION ........................................................................................... 93
14221-1850-2000, Rev. A
6
TABLE OF CONTENTS
Section Page
7. REFERENCE ....................................................................................................................................... 96
7.1 MARINE FREQUENCIES ........................................................................................................ 96
7.2 NARROWBANDING .............................................................................................................. 101
8. GLOSSARY ........................................................................................................................................ 102
9. BASIC TROUBLESHOOTING ........................................................................................................ 105
9.1 ERROR MESSAGES ............................................................................................................... 105
9.2 OTAR ERRORS/INFORMATION .......................................................................................... 107
10. TECHNICAL ASSISTANCE ............................................................................................................ 108
11. WARRANTY ...................................................................................................................................... 108
LIST OF FIGURES
Page
Figure 3-1: Vehicle Communications Hub (VCH) ........................................................................................ 20
Figure 3-2: XL Control Head ........................................................................................................................ 21
Figure 3-3: Keypad Mobile Microphone ....................................................................................................... 22
Figure 4-1: Control Head Controls ................................................................................................................ 25
Figure 4-2: Keypad Mobile Microphone (KMM) Controls ........................................................................... 25
Figure 4-3: Sample Main Front Display ........................................................................................................ 28
Figure 4-4: Top-Level Menu Listing ............................................................................................................. 33
Figure 4-5: Call Menu ................................................................................................................................... 33
Figure 4-6: Voice Microphone ...................................................................................................................... 45
Figure 4-7: Noise Reference Microphone ..................................................................................................... 45
LIST OF TABLES
Page
Table 1-1: Calculated Minimum Safe Distance from LMR Antenna (Based on Maximum Gain of Non-
Yagi/Non-Log Periodic Antennas) ................................................................................................ 9
Table 1-2: Calculated Minimum Safe Distance from LMR Antenna (Based on Maximum Gain of
Yagi/Log Periodic Antennas) Mobile Command Center applications ........................................ 10
Tableau 2-1: Distance latérale sécuritaire minimale recommandée dune antenne de transmission
branchée sur une radio mobile XL .............................................................................................. 16
Tableau 2-2: Distance latérale sécuritaire minimale recommandée dune antenne de transmission
branchée sur une radio mobile XL - Applications du centre de commande mobile ................... 17
Table 4-1: Radio Controls, Indicators, and Connectors ................................................................................. 26
Table 4-2: Radio Icons................................................................................................................................... 29
Table 4-3: Status Messages ........................................................................................................................... 30
Table 4-4: Predefined Menu Layouts ............................................................................................................ 31
Table 4-5: Menu Navigation ......................................................................................................................... 34
Table 4-6: Alert Tones ................................................................................................................................... 37
Table 6-1: Valid Frequency Ranges .............................................................................................................. 90
Table 6-2: Programmable Button Options ..................................................................................................... 91
Table 7-1: Marine Frequencies ...................................................................................................................... 96
Table 9-1: Displayed Error Messages, Reasons, and Resolutions .............................................................. 105
14221-1850-2000, Rev. A
7
1. REGULATORY AND SAFETY INFORMATION
1.1 SAFETY SYMBOL CONVENTIONS
The following conventions are used in this manual to alert the user to general safety precautions that must
be observed during all phases of operation, installation, service, and repair of this product. Failure to comply
with these precautions or with specific warnings elsewhere violates safety standards of design, manufacture,
and intended use of the product. Harris assumes no liability for the customer's failure to comply with these
standards.
The WARNING symbol calls attention to a procedure, practice, or the like, which, if not
correctly performed or adhered to, could result in personal injury. Do not proceed beyond
a WARNING symbol until the conditions identified are fully understood or met.
The CAUTION symbol calls attention to an operating procedure, practice, or the like, which, if
not performed correctly or adhered to, could result in damage to the equipment or severely
degrade equipment performance.
The NOTE symbol calls attention to supplemental information, which may improve system
performance or clarify a process or procedure.
1.2 RF ENERGY EXPOSURE AWARENESS AND CONTROL
INFORMATION FOR FCC OCCUPATIONAL USE REQUIREMENTS
Before using the two-way mobile radio, review the following important RF energy awareness and
control information and operational instructions. Comply with this information and instructions to
ensure compliance with RF exposure guidelines.
This radio is intended for use in occupational/controlled conditions, where users have full
knowledge of their exposure and can exercise control over their exposure to remain below
RF exposure limits. This radio is NOT authorized for general population, consumer, or
any other use.
Changes or modifications not expressly approved by Harris could void the user's authority to
operate the equipment.
NOTE
14221-1850-2000, Rev. A
8
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide
communications between two or more users over a distance. It uses RF energy or radio waves to send and
receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to,
electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other forms of
electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of
x-rays, for example, can damage tissues and genetic material.
Experts in science, engineering, medicine, health, and industry work with organizations to develop
standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both
workers and the general public. These recommended RF exposure levels include substantial margins of
protection. All two-way radios marketed in North America are designed, manufactured, and tested to ensure
they meet government-established RF exposure levels. In addition, manufacturers also recommend specific
operating instructions to users of two-way radios. These instructions are important because they inform
users about RF energy exposure and provide simple procedures on how to control it. Refer to the following
websites for more information on what RF energy exposure is and how to control exposure to assure
compliance with established RF exposure limits:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov./SLTC/radiofrequencyradiation/index.html
1.2.1 Federal Communications Commission Regulations
Before it was marketed in the United States, the XL Series mobile radio was tested to ensure compliance
with FCC RF energy exposure limits for two-way mobile radios. When two-way radios are used as a
consequence of employment, the FCC requires users to be fully aware of and able to control their exposure
to meet occupational requirements. Exposure awareness can be facilitated using a label directing users to
specific user awareness information. The radio has an RF exposure product label. Also, this manual includes
information and operating instructions required to control RF exposure and to satisfy compliance
requirements.
1.3 COMPLIANCE WITH RF EXPOSURE STANDARDS
The XL Series mobile radio is designed and tested to comply with a number of national and international
standards and guidelines regarding human exposure to RF electromagnetic energy. This radio complies
with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty-
cycle times of up to 50% (50% transmit, 50% receive), and it is authorized by the FCC for occupational
use. In terms of measuring RF energy for compliance with the FCC exposure guidelines, the radio’s antenna
radiates measurable RF energy only while it is transmitting (talking), not when it is receiving (listening),
or in a standby mode.
Table 1-1 lists the recommended minimum safe lateral distances for a controlled environment
and for unaware bystanders in an uncontrolled environment, from transmitting antennas (i.e.,
monopoles over a ground plane, or dipoles) at rated radio power for mobile radios installed in
a vehicle. Transmit only when unaware bystanders are at least the uncontrolled recommended
minimum safe lateral distance away from the transmitting antenna.
14221-1850-2000, Rev. A
9
The XL Series mobile radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR § 2
sub-part J.
American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)
C95.1-2005.
Institute of Electrical and Electronic Engineers (IEEE) C95.1-2005.
IC Standard RSS-102, Issue 5, 2015: Spectrum Management and Telecommunications Radio Standards
Specification. Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All
Frequency Bands).
Based on the highest radiated RF power and the highest antenna gain in antennas to be used with the XL
Series mobile radio, the distances listed are considered as safe distances for controlled and uncontrolled
environments with the XL Series mobile radio transmitting at a maximum 50% duty cycle.
1.3.1 Mobile Antennas
The antenna(s) for the radio must be installed in accordance with the antenna installation procedures
presented in the radio’s Installation Manual. Installation guidelines presented in the Installation Manual
are limited to metal-body motor vehicles or vehicles with appropriate ground planes.
Use only approved/supplied antenna(s) or an approved replacement antenna. Unauthorized antennas,
modifications, or attachments can cause the FCC RF exposure limits to be exceeded. Refer to Section 3.4
for the list of approved antennas.
Table 1-1: Calculated Minimum Safe Distance from LMR Antenna
(Based on Maximum Gain of Non-Yagi/Non-Log Periodic Antennas)
TRANSMIT
FREQUENCY
RECOMMENDED MINIMUM LATERAL HUMAN BODY DISTANCE FROM TRANSMITTING
ANTENNA
U.S. CANADA
CONTROLLED
ENVIRONMENT
UNCONTROLLED
ENVIRONMENT
CONTROLLED
ENVIRONMENT
UNCONTROLLED
ENVIRONMENT
33 to 48 MHz 35 in (89 cm) 78 in (198 cm) 35 in (89 cm) 78 in (198 cm)
48 50 MHz 35 in (89 cm) 78 in (198 cm) 43 in (110 cm) 97 in (246 cm)
136 to 174 MHz 35 in (89 cm) 78 in (198 cm) 40.6 in (103 cm) 97 in (246 cm)
378 to 522 MHz 31 in (78 cm) 70 in (177 cm) 30.7 in (78 cm) 90 in (229 cm)
763 806 MHz 24 in (62 cm) 53.5 in (136 cm) 28.7 in (73 cm) 78 in (198 cm)
800 870 MHz 7 in (18 cm) 22.8 in (58 cm) 11.9 in (30 cm) 38 in (96 cm)
896 944 MHz 6.7 in (17 cm) 19.7 in (50 cm) 7 in (18 cm) 33.5 in (85 cm)
14221-1850-2000, Rev. A
10
Table 1-2: Calculated Minimum Safe Distance from LMR Antenna
(Based on Maximum Gain of Yagi/Log Periodic Antennas)
Mobile Command Center applications
TRANSMIT
FREQUENCY
RECOMMENDED MINIMUM LATERAL HUMAN BODY DISTANCE FROM TRANSMITTING
ANTENNA
U.S. CANADA
CONTROLLED
ENVIRONMENT
UNCONTROLLED
ENVIRONMENT
CONTROLLED
ENVIRONMENT
UNCONTROLLED
ENVIRONMENT
136 to 174 MHz 49 in (125 cm) 110 in (280 cm) 57 in (145 cm) 137 in (347 cm)
378 to 522 MHz 69 in (174 cm) 156 in (396 cm) 69 in (174 cm) 201 in (511 cm)
763 806 MHz 38 in (97 cm) 85 in (215 cm) 45 in (115 cm) 123 in (313 cm)
800 870 MHz 15 in (39 cm) 69 in (174 cm) 22 in (56 cm) 122 in (309 cm)
846 944 MHz 15 in (39 cm) 53 in (134 cm) 28 in (71 cm) 104 in (265 cm)
1.3.2 Approved Accessories
The radio has been tested and meets FCC RF guidelines when used with accessories supplied or designated
for use with it. Use of other accessories may not ensure compliance with the FCC’s RF exposure guidelines
and may violate FCC regulations. For a list of approved accessories, refer to the radio’s Installation Manual
and/or the Products and Services Catalog.
1.3.3 Contact Information
For additional information on RF exposure and other information, contact Harris using one of the contact
links listed in Section 10.
1.4 REGULATORY APPROVALS
1.4.1 Applicable Type Acceptance/Certification Numbers
FCC Type Acceptance:
XL-185M (14050-1100-11 Hardware): OWDTR-0160-E
XL-200M/XL-185M (14050-1100-01 Hardware): OWDTR-0161-E
Applicable FCC Rules: Part 15, Part 80, and Part 90
Industry Canada Certification:
XL-185M (14050-1100-11 Hardware): 3636B-0160
XL-200M/XL-185M (14050-1100-01 Hardware): 3636B-0161
Applicable Industry Canada Rules: RSS-247, RSS-119, ICES-003 Issue 6
14221-1850-2000, Rev. A
11
1.4.2 FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
1.4.3 Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
1.5 OCCUPATIONAL SAFETY GUIDELINES AND SAFETY TRAINING
INFORMATION
To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for
occupational use. Always adhere to the following basic guidelines:
The push-to-talk button should only be depressed when intending to send a voice message.
The radio should only be used for necessary work-related communications.
The radio should only be used by authorized and trained personnel. It should never be operated by
children.
Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may
cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel
should service the radio.
Always use only authorized accessories (antennas, control heads, speakers/mics, etc.). Use of
unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded.
The information listed above provides the user with information needed to make him or her aware of a RF
exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.
1.6 COMMON HAZARDS
The operator of any mobile radio should be aware of certain hazards common to the
operation of vehicular radio transmissions. Possible hazards include but are not limited to
the following:
Explosive Atmospheres - Just as it is dangerous to fuel a vehicle while its engine is running, be sure
to turn the radio OFF while fueling the vehicle. If the radio is mounted in the trunk of the vehicle, DO
NOT carry containers of fuel in the trunk.
14221-1850-2000, Rev. A
12
Areas with potentially explosive atmosphere are often, but not always, clearly marked. Turn the radio
OFF when in any area with a potentially explosive atmosphere. It is rare, but not impossible that the
radio or its accessories could generate sparks.
Interference To Vehicular Electronic Systems - Electronic fuel injection systems, electronic anti-
skid braking systems, electronic cruise control systems, etc., are typical of the types of electronic
devices that can malfunction due to the lack of protection from radio frequency (RF) energy present
when transmitting. If the vehicle contains such equipment, consult the dealer for the make of vehicle
and enlist his aid in determining if such electronic circuits perform normally when the radio is
transmitting.
Electric Blasting Caps - To prevent accidental detonation of electric blasting caps, DO NOT use two-
way radios within 1000 feet (305 meters) of blasting operations. Always obey the “Turn Off Two-
Way Radios” (or equivalent) signs posted where electric blasting caps are being used. (OSHA
Standard: 1926.900).
Radio Frequency Energy - To prevent burns or related physical injury from radio frequency energy,
do not operate the transmitter when anyone outside of the vehicle is within the minimum safe distance
from the antenna as specified in Table 1-1. Refer to Section 1.2 for additional information.
Vehicles Powered by Liquefied Petroleum (LP) Gas - Radio installation in vehicles powered by
liquefied petroleum gas, where the LP gas container is in the trunk or other sealed-off space within the
interior of the vehicle, must conform to the National Fire Protection Association standard NFPA 58.
This requires:
The space containing the radio equipment must be isolated by a seal from the space containing
the LP gas container and its fittings.
Outside filling connections must be used for the LP gas container.
The LP gas container space shall be vented to the outside of the vehicle.
Vehicles Equipped with Airbags - For driver and passenger safety, avoid mounting the radio’s control
head (or any other component) above or near airbag deployment areas. In addition to driver-side and
passenger-side front-impact airbags, some vehicles may also be equipped with side-impact airbags. For
occupant safety, verify the location of all airbags within the vehicle before installing the radio
equipment.
1.7 SAFE DRIVING RECOMMENDATIONS
The American Automobile Association (AAA) advocates the following key safe driving recommendations:
Read the literature on the safe operation of the radio.
Keep both hands on the steering wheel and the microphone in its hanger whenever the vehicle is in motion.
Place calls only when the vehicle is stopped.
When talking from a moving vehicle is unavoidable, drive in the slower lane. Keep conversations brief.
If a conversation requires taking notes or complex thought, stop the vehicle in a safe place and continue
the call.
Whenever using a mobile radio, exercise caution.
14221-1850-2000, Rev. A
13
1.8 OPERATING RULES AND REGULATIONS
Two-way radio systems must be operated in accordance with the rules and regulations of the local, regional,
or national government.
In the United States, the XL mobile radio must be operated in accordance with the rules and regulations of
the Federal Communications Commission (FCC). Operators of two-way radio equipment must be
thoroughly familiar with the rules that apply to the radio operation. Following these rules helps eliminate
confusion, assures the most efficient use of the existing radio channels, and results in a smoothly
functioning radio network.
When using a two-way radio, remember these rules:
It is a violation of FCC rules to interrupt any distress or emergency message. The radio operates in
much the same way as a telephone “party line.” Therefore, always listen to make sure the channel is
clear before transmitting. Emergency calls have priority over all other messages. If someone is sending
an emergency message such as reporting a fire or asking for help in an accident, do not transmit unless
assistance can be offered.
The use of profane or obscene language is prohibited by Federal law.
It is against the law to send false call letters or false distress or emergency messages. The FCC requires
keeping conversations brief and confined to business. Use coded messages whenever possible to save
time.
Using the radio to send personal messages (except in an emergency) is a violation of FCC rules. Send
only essential messages.
It is against Federal law to repeat or otherwise make known anything overheard on the radio.
Conversations between others sharing the channel must be regarded as confidential.
The FCC requires self-identification at certain specific times by means of call letters. Refer to the rules
that apply to the operation for the proper procedure.
No changes or adjustments shall be made to the equipment except by an authorized or certified
electronics technician.
United States may be punishable by a fine of up to $10,000, imprisonment for up to two (2)
years, or both.
1.9 OPERATING TIPS
The following conditions tend to reduce the effective range of two-way radios and should be avoided
whenever possible:
Operating the radio in areas of low terrain, or while under power lines or bridges.
Obstructions such as mountains and buildings.
In areas where transmission or reception is poor, communication improvement may sometimes
be obtained by moving a few yards in another direction or moving to a higher elevation.
NOTE
14221-1850-2000, Rev. A
14
2. RENSEIGNEMENTS SUR LA RÉGLEMENTATION ET
SÉCURITÉ
2.1 CONVENTIONS SUR LES SYMBOLES DE SÉCURITÉ
Les conventions suivantes sont utilisées dans le présent manuel pour avertir l’utilisateur des précautions
générales de sécurité qui doivent être observées pendant toutes les phases d’opération, d’entretien et de
réparation de ce produit. Le non-r.espect de ces précautions ou d’avertissements précisés ailleurs enfreint
les normes de sécurité de la conception, de la fabrication et de l’utilisation prévue du produit. Harris
n’assume aucune responsabilité pour le non-respect de ces normes par le client.
Le symbole MISE EN GARDE attire l’attention sur une procédure ou une pratique qui, si
elle n’est pas correctement effectuée ou observée, pourrait entraîner une blessure
personnelle. Ne pas poursuivre au-delà d’un symbole de MISE EN GARDE avant que les
conditions identifiées soient complètement comprises ou satisfaites.
Le symbole AVERTISSEMENT
attire l’attention sur une procédure ou une pratique
opérationnelle qui, si elle n’est pas correctement effectuée ou observée, pourrait entraîner un bris
d’équipement ou une importante baisse de rendement de l’équipement.
Le symbole REMARQUE attire l’attention sur des renseignements supplémentaires qui peuvent
améliorer le rendement du système ou clarifier un processus ou une procédure.
2.2 RENSEIGNEMENTS SUR UNE EXPOSITION À LÉNERGIE DES RF
2.2.1 Renseignements Sur Le Contrôle Et La Sensibilisation À Lénergie Des
RF Pour Les Exigences Dune Utilisation Professionnelle De La FCC
Avant dutiliser les radios mobiles bidirectionnelles, passez en revue les renseignements et les
instructions opérationnelles importants suivants sur le contrôle et la sensibilisation à lénergie des
RF. Se conformer à ces renseignements et instructions pour assurer la conformité aux directives
d’exposition aux RF.
Cette radio est destinée à être utilisée dans des conditions professionnelles/
contrôlées, où les utilisateurs ont une pleine connaissance de leur exposition et peuvent
exercer un contrôle sur leur exposition pour rester sous les limites dexposition aux RF.
Cette radio Nest PAS autorisée pour la population générale, les consommateurs ou toute
autre utilisation.
14221-1850-2000, Rev. A
15
Des changements ou modifications non expressément approuvés par Harris pourraient
annuler le droit dutilisation de léquipement pour lutilisateur.
Cette radio bidirectionnelle utilise une énergie électromagnétique dans le spectre des radiofréquences (RF)
pour permettre une communication à distance entre deux utilisateurs ou plus. Elle utilise l’énergie des RF
ou les ondes radio pour envoyer et recevoir des appels. L’énergie des RF est une forme d’énergie
électromagnétique. D’autres formes comprennent, entre autres, l’énergie électrique, la lumière du soleil et
les rayons X. Toutefois, l’énergie des RF ne doit pas être confondue avec ces autres formes d’énergie
électromagnétique qui, lorsque mal utilisées, peuvent causer des dommages biologiques. Par exemple, des
niveaux très élevés de rayons X peuvent endommager les tissus et le matériel génétique.
Des experts en science, en ingénierie, en médecine, en santé et de l’industrie travaillent avec des organismes
pour établir des normes pour l’exposition à l’énergie des RF. Ces normes procurent des niveaux
recommandés d’exposition aux RF autant aux travailleurs qu’au grand public. Ces niveaux d’exposition
aux RF recommandés comprennent d’importantes marges de protection. Toutes les radios bidirectionnelles
commercialisées en Amérique du Nord sont conçues, fabriquées et testées pour s’assurer qu’elles satisfont
les niveaux d’exposition aux RF établis par le gouvernement. Les fabricants recommandent également des
consignes d’utilisation particulières aux utilisateurs de radios bidirectionnelles. Ces instructions sont
importantes, car elles informent les utilisateurs sur l’exposition à l’énergie des RF et donnent des procédures
simples sur la manière de contrôler cette exposition. Consultez les sites Web suivants (en anglais) pour de
plus amples renseignements sur ce qu’est l’exposition à l’énergie des RF et comment contrôler l’exposition
pour assurer la conformité aux limites d’exposition établies :
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
http://www.osha.gov./SLTC/radiofrequencyradiation/index.html
2.2.2 Règlements de la Federal Communications Commission (« Commission
fédérale des communications » aux États-Unis)
Avant dêtre mise sur le marché aux États-Unis, la radio mobile bidirectionnelle XL a été testée pour
s’assurer de sa conformité aux limites dexposition à l’énergie des RF de la FCC pour les radios mobiles
bidirectionnelles. Lorsque les radios bidirectionnelles sont utilisées à la suite d’une embauche, la FCC
demande aux utilisateurs de bien connaître et de pouvoir contrôler leur exposition pour satisfaire les
exigences professionnelles. La sensibilisation à l’exposition peut être facilitée par l’utilisation d’une
étiquette qui dirige les utilisateurs vers des renseignements particuliers sur la sensibilisation de l’utilisateur.
La radio possède une étiquette de produit sur l’exposition aux RF. De plus, le Manuel sur la sécurité du
produit et le présent Manuel de lopérateur comprennent des renseignements et les consignes dutilisation
nécessaires pour contrôler lexposition aux RF et pour satisfaire les exigences de conformité.
d’utilisation nécessaires pour contrôler lexposition aux RF et pour satisfaire les exigences de conformité.
14221-1850-2000, Rev. A
16
2.3 CONFORMITÉ AUX NORMES D’EXPOSITION AUX RF
La radio mobile bidirectionnelle XL est conçue et testée pour être conforme à un certain nombre de normes
et directives nationales et internationales quant à lexposition humaine à lénergie électromagnétique des
RF. Cette radio est conforme aux limites d’exposition de l’IEEE et de la Commission internationale de
protection contre les rayonnements non ionisants pour un environnement professionnel/contrôlé
d’exposition aux RF à des périodes de cycle de service allant jusqu’à 50 % (50 % de transmission, 50 % de
réception) et elle est autorisée par la FCC pour une utilisation professionnelle. Sur le plan de la mesure de
l’énergie des RF pour la conformité aux directives d’exposition de la FCC, l’antenne de la radio irradie une
énergie des RF mesurable seulement lorsqu’elle transmet (parler), et non lorsqu’elle reçoit (écouter) ou en
mode d’attente.
Tableau 2-1 indiquent les distances latérales sécuritaires minimales recommandées pour un
environnement contrôlé et pour les spectateurs ignorants dans un environnement non contrôlé,
d’antennes de transmission (c.-à-d., des monopôles sur un plan de sol, ou des dipôles) à une
puissance de radio évaluée pour les radios mobiles installées dans un véhicule. Ils ne transmettent
que lorsque les spectateurs ignorants sont au moins à la distance latérale sécuritaire minimale
recommandée non contrôlée de lantenne de transmission.
La radio mobile bidirectionnelle XL est conforme aux normes et directives dexposition à lénergie des RF
suivantes :
Federal Communications Commission (FCC) américaine, le Code of Federal Regulations ; 47 CFR § 2
sous-partie J.
American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE)
C95.1-2005.
Institute of Electrical and Electronic Engineers (IEEE) C95.1-2005.
IC Standard RSS-102, numéro 5, 2015: Spectrum Management and Telecommunications Radio
Standards Specification. Radiofrequency Exposure Compliance of Radiocommunication Apparatus
(All Frequency Bands).
Basées sur la puissance des RF irradiées la plus élevée et le gain dantenne le plus élevé dans les antennes
à utiliser avec le radio mobile bidirectionnelle XL, les distances indiquées dans les Tableau 2-1 sont
considérées comme des distances sécuritaires pour des environnements contrôlés et non contrôlés avec la
radio mobile XL qui transmet à un cycle de service maximal de 50 % :
Tableau 2-1: Distance latérale sécuritaire minimale recommandée dune antenne de transmission branchée
sur une radio mobile XL
FRÉQUENCE DE
TRANSMISSION
DISTANCE MINIMALE RECOMMANDÉE DE L’ANTENNE DE TRANSMISSION POUR LE
CORPS HUMAIN
U.S. CANADA
ENVIRONNEMENT
CONTRÔLÉ
ENVIRONNEMENT
NON CONTRÔLÉ
ENVIRONNEMENT
CONTRÔLÉ
ENVIRONNEMENT
NON CONTRÔLÉ
33 to 48 MHz 35 po (89 cm) 78 po (198 cm) 35 po (89 cm) 78 po (198 cm)
48 50 MHz 35 po (89 cm) 78 po (198 cm) 43 po (110 cm) 97 po (246 cm)
14221-1850-2000, Rev. A
17
FRÉQUENCE DE
TRANSMISSION
DISTANCE MINIMALE RECOMMANDÉE DE L’ANTENNE DE TRANSMISSION POUR LE
CORPS HUMAIN
U.S. CANADA
ENVIRONNEMENT
CONTRÔLÉ
ENVIRONNEMENT
NON CONTRÔLÉ
ENVIRONNEMENT
CONTRÔLÉ
ENVIRONNEMENT
NON CONTRÔLÉ
136 to 174 MHz 35 po (89 cm) 78 po (198 cm) 40.6 po (103 cm) 97 po (246 cm)
378 to 522 MHz 31 po (78 cm) 70 po (177 cm) 30.7 po (78 cm) 90 po (229 cm)
763 806 MHz 24 po (62 cm) 53.5 po (136 cm) 28.7 po (73 cm) 78 po (198 cm)
800 870 MHz 7 po (18 cm) 22.8 po (58 cm) 11.9 po (30 cm) 38 po (96 cm)
896 944 MHz 6.7 po (17 cm) 19.7 po (50 cm) 7 po (18 cm) 33.5 po (85 cm)
Tableau 2-2: Distance latérale sécuritaire minimale recommandée dune antenne de transmission branchée
sur une radio mobile XL - Applications du centre de commande mobile
FRÉQUENCE DE
TRANSMISSION
DISTANCE MINIMALE RECOMMANDÉE DE L’ANTENNE DE TRANSMISSION POUR LE
CORPS HUMAIN
U.S. CANADA
ENVIRONNEMENT
CONTRÔLÉ
ENVIRONNEMENT
NON CONTRÔLÉ
ENVIRONNEMENT
CONTRÔLÉ
ENVIRONNEMENT
NON CONTRÔLÉ
136 to 174 MHz 49 po (125 cm) 110 po (280 cm) 57 po (145 cm) 137 po (347 cm)
378 to 522 MHz 69 po (174 cm) 156 po (396 cm) 69 po (174 cm) 201 po (511 cm)
763 806 MHz 38 po (97 cm) 85 po (215 cm) 45 po (115 cm) 123 po (313 cm)
800 870 MHz 15 po (39 cm) 69 po (174 cm) 22 po (56 cm) 122 po (309 cm)
846 944 MHz 15 po (39 cm) 53 po (134 cm) 28 po (71 cm) 104 po (265 cm)
14221-1850-2000, Rev. A
18
2.3.1 Antennes Mobiles
Les antennes pour la radio doivent être installées conformément aux procédures présentées dans le Manuel
sur la sécurité du produit et dans le Manuel d’installation. L’installation est limitée à un ou des véhicules
motorisés en métal avec des plans au sol appropriés.
Utilisez uniquement les antennes approuvées/fournies ou une antenne de remplacement approuvée (voir la
Section 3.4). Des antennes, des modifications ou des accessoires non autorisés peuvent causer un
dépassement des limites d’exposition aux RF de la FCC.
2.3.2 Accessoires Approuvés
La radio a été testée et satisfait les directives de RF de la FCC lorsquelle est utilisée avec les accessoires
fournis ou conçus pour être utilisés avec elle. L’utilisation dautres accessoires peut ne pas garantir la
conformité aux directives dexposition de la FCC et peut enfreindre la réglementation de la FCC. Pour une
liste daccessoires approuvés, consultez le Manuel dinstallation ou le Catalogue de produits et services de
Harris.
Utilisez toujours des accessoires autorisés Harris (antennes, haut-parleurs/micros, etc.).
L’utilisation daccessoires non autorisés peut entraîner un dépassement des exigences de
conformité pour une exposition aux RF professionnelle ou contrôlée de la FCC.
2.3.3 Coordonnées
Pour de plus amples renseignements sur lexposition aux RF ou dautres renseignements, contactez Harris
en utilisant lun des liens apparaissant à la Section 10.
2.4 INTERFÉRENCE DES RADIOFRÉQUENCES
2.4.1 Partie 15 de la FCC
Cet appareil est conforme à la Partie 15 de la réglementation de la FCC. Le fonctionnement est soumis aux
deux conditions suivantes :
1. Cet appareil ne doit pas causer une interférence nuisible; et
2. Cet appareil doit accepter toute interférence reçue, y compris une interférence qui peut causer un
fonctionnement non souhaité.
2.4.2 Industrie Canada
Cet appareil est conforme aux normes RSS exemptées de licence dIndustrie Canada. Le fonctionnement
est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer dinterférence et (2) cet
appareil doit accepter toute interférence, y compris une interférence qui peut causer un fonctionnement non
souhaité de lappareil.
14221-1850-2000, Rev. A
19
2.5 RENSEIGNEMENTS SUR LA FORMATION SUR LA SANTÉ ET LA
SÉCURITÉ AU TRAVAIL
S’assurer que lexposition physique à lénergie électromagnétique des RF se situe dans les limites
acceptables de la FCC pour lutilisation professionnelle. Toujours se conformer aux directives de base
suivantes :
Le bouton de microphone doit être abaissé seulement lorsque l’on souhaite envoyer un message vocal.
La radio doit être utilisée seulement pour les communications nécessaires liées au travail.
La radio doit être utilisée seulement par du personnel autorisé et formé. Elle ne doit jamais être utilisée
par des enfants.
Ne tentez pas d’apporter une modification non autorisée à la radio. Des changements ou des
modifications à la radio peuvent causer une interférence nocive ou entraîner un dépassement des limites
d’exposition aux RF de la FCC. Seul le personnel qualifié doit utiliser la radio.
Utilisez toujours seulement des accessoires autorisés (antennes, haut-parleurs/micros, etc.).
L’utilisation d’accessoires non autorisés peut entraîner un dépassement des exigences de conformité
pour une exposition aux RF de la FCC.
Les renseignements donnés ci-dessus donnent à lutilisateur les renseignements nécessaires pour le
sensibiliser à lexposition aux RF et sur ce quil faut faire pour sassurer que cette radio fonctionne dans les
limites dexposition de la FCC de cette radio.
14221-1850-2000, Rev. A
20
3. INTRODUCTION
3.1 DESCRIPTION
The XL Series Mobile Radio provides the advanced connectivity that first responders require while
addressing evolving voice and data communications. It meets MIL-STD-810G for durability. XL Mobile
Radios support P25 Trunking, P25 Conventional, EDACS
®
, and analog conventional.
The XL Mobile is a P25 converged, multiband Land Mobile Radio with an option to include LTE capability.
The XL-200M is a full-spectrum multiband mobile radio, supporting the UHF, VHF, 700 MHz, 800 MHz,
and 900 MHz frequency bands. The XL-185M supports the same frequency bands, but can only perform
as a single-band radio. Designed for anyone who needs to communicate with multiple agencies or across
multiple bands, the XL Mobile delivers mission-critical connectivity.
For options and accessories, refer to Section 3.4. Additional accessories may have been added since
publication of this manual; refer to the Products and Services Catalog or contact Harris for more
information.
The XL Mobile installation includes a control head and the Vehicle Communications Hub (VCH), which
are described in the following sections.
3.1.1 Vehicle Communications Hub (VCH)
The XL Vehicle Communications Hub (VCH) is the main LMR radio unit in a vehicular (mobile) radio
system. A major feature of the VCH design is the use of IP networks for tethering multiple radio control
heads. With respect to the audio systems, this feature allows the VCH to support approximately eight IP
devices as audio sources and destinations.
Figure 3-1: Vehicle Communications Hub (VCH)
3.1.2 XL Control Head
The XL Mobile supports the addition of an XL Control Head to the VCH in a front-mount or remote-mount
configuration. In the front-mount configuration, the VCH and control head are physically mounted together,
while in the remote-mount configuration, the control head is in a separate location.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110

Harris XL Series Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues