Tascam DR 40 Manuel utilisateur

D01242000B

DR-40

Linear PCM Recorder

ENGLISH

FRANÇAIS

ESPAÑOL

DEUTSCH

ITALIANO

RUSSIAN

OWNER'S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

2 TASCAM DR-40

• TASCAM is a trademark of TEAC CORPORATION, registered

in the U.S. and other countries.

• SDXC Logo is a trademark of SD-3C, LLC.

• Supply of this product does not convey a license nor imply

any right to distribute MPEG Layer-3 compliant content

created with this product in revenue-generating broadcast

systems (terrestrial, satellite, cable and/or other distribution

channels), streaming applications (via Internet, intranets

and/or other networks), other content distribution systems

(pay-audio or audio-on-demand applications and the like)

or on physical media (compact discs, digital versatile discs,

semiconductor chips, hard drives, memory cards and the

like). An independent license for such use is required. For

details, please visit http://mp3licensing.com.

• MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson Licensing.

• Microsoft, Windows and Windows Vista are either registered

trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

• Mac, Mac OS and Mac OS X are trademarks of Apple Inc.

• Other company names, product names and logos in this

document are the trademarks or registered trademarks of

their respective owners.

TEAC CORPORATION

https://tascam.jp/jp/

Phone: +81-42-356-9143

1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan

TEAC AMERICA, INC. http://tascam.com/

Phone: +1-323-726-0303

1834 Gage Road, Montebello, California 90640 USA

TEAC MEXICO, S.A. de C.V.

http://teacmexico.net/

Phone: +52-55-5010-6000

Río Churubusco 364, Colonia Del Carmen, Delegación

Coyoacán, CP 04100, México DF, México

TEAC UK LIMITED

http://tascam.eu/

Phone: +44-8451-302511

2 Huxley Road, Surrey Research Park, Guildford, GU2 7RE,

United Kingdom

TEAC EUROPE GmbH

http://tascam.eu/

Phone: +49-611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

TEAC SALES & TRADING(SHENZHEN) CO., LTD

Phone: +86-755-88311561~2

Room 817, Block A, Hailrun Complex, 6021 Shennan Blvd.,

Futian District, Shenzhen 518040, China

TASCAM DR-40 3

Owner’s Manual

IMPORTANT SAFETY PRECAUTIONS

INFORMATION TO THE USER

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment and receiver.

c) Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications to this equipment not expressly approved by TEAC

CORPORATION for compliance could void the user’s authority to operate this

equipment.

For U.S.A.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE B EST CONFORME A LA NORME

NMB-003 DU CANADA.

Declaration of Conformity

Responsible party : TEAC AMERICA, INC.

Address : 1834 Gage Road, Montebello, California,

U.S.A.

Telephone number : 1-323-726-0303

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including inter-

ference that may cause undesired operation.

This product complies with the European Directives

request and the other Commission Regulations.

IMPORTANT SAFETY INSTRUCTIONS

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or

the third prong are provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete

outlet.

4 TASCAM DR-40

10 Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• The apparatus draws nominal non-operating power from the AC outlet with

its POWER or STANDBY/ON switch not in the ON position.

• The mains plug is used as the disconnect device, the disconnect device shall

remain readily operable.

• Caution should be taken when using earphones or headphones with the

product because excessive sound pressure (volume) from earphones or

headphones can cause hearing loss.

• If you are experiencing problems with this product, contact TEAC for a service

referral. Do not use the product until it has been repaired.

CAUTION

• Do not expose this apparatus to drips or splashes.

• Do not place any objects filled with liquids, such as vases, on the apparatus.

• Do not install this apparatus in a confined space such as a book case or similar

unit.

• The apparatus should be located close enough to the AC outlet so that you

can easily grasp the power cord plug at any time.

• If the product uses batteries (including a battery pack or installed batteries),

they should not be exposed to sunshine, fire or excessive heat.

• CAUTION for products that use replaceable lithium batteries: there is danger

of explosion if a battery is replaced with an incorrect type of battery. Replace

only with the same or equivalent type.

CAUTIONS ABOUT BATTERIES

This product uses batteries. Misuse of batteries could cause a leak, rupture or

other trouble. Always abide by the following precautions when using batteries.

• Never recharge non-rechargeable batteries. The batteries could rupture or

leak, causing fire or injury.

• When installing batteries, pay attention to the polarity indications (plus/minus

(¥/^) orientation), and install them correctly in the battery compartment as

indicated. Putting them in backward could make the batteries rupture or leak,

causing fire, injury or stains around them.

• When you store or dispose batteries, isolate their terminals with insulation

tape or something like that to prevent them from contacting other batteries

or metallic objects.

• When throwing used batteries away, follow the disposal instructions indicated

on the batteries and the local disposal laws.

• Do not use batteries other than those specified. Do not mix and use new

and old batteries or different types of batteries together. The batteries could

rupture or leak, causing fire, injury or stains around them.

• Do not carry or store batteries together with small metal objects. The batteries

could short, causing leak, rupture or other trouble.

• Do not heat or disassemble batteries. Do not put them in fire or water.

Batteries could rupture or leak, causing fire, injury or stains around them.

• If the battery fluid leaks, wipe away any fluid on the battery case before

inserting new batteries. If the battery fluid gets in an eye, it could cause loss

of eyesight. If fluid does enter an eye, wash it out thoroughly with clean water

without rubbing the eye and then consult a doctor immediately. If the fluid

gets on a person’s body or clothing, it could cause skin injuries or burns. If

this should happen, wash it off with clean water and then consult a doctor

immediately.

• The unit power should be off when you install and replace batteries.

• Remove the batteries if you do not plan to use the unit for a long time.

Batteries could rupture or leak, causing fire, injury or stains around them. If the

battery fluid leaks, wipe away any fluid on the battery compartment before

inserting new batteries.

TASCAM DR-40 5

• Do not disassemble a battery. The acid inside the battery could harm skin or

clothing.

8For European Customers

Disposal of electrical and electronic equipment

(a) All electrical and electronic equipment should be disposed of separately

from the municipal waste stream via designated collection facilities

appointed by the government or the local authorities.

(b) By disposing of the electrical and electronic equipment correctly, you will

help save valuable resources and prevent any potential negative effects on

human health and the environment.

(c) Improper disposal of waste equipment can have serious effects on the

environment and human health as a result of the presence of hazardous

substances in electrical and electronic equipment.

(d) The crossed out wheeled dust bin symbol indicates that

electrical and electronic equipment must be collected and

disposed of separately from household waste.

(e) The return and collection systems are available to the end users.

For more detailed information about disposal of old electrical

and electronic equipment, please contact your city office, waste

disposal service or the shop where you purchased the equipment.

Disposal of batteries and/or accumulators

(a) Waste batteries and/or accumulators should be disposed of separately from

the municipal waste stream via designated collection facilities appointed by

the government or the local authorities.

(b) By disposing of waste batteries and/or accumulators correctly, you will

help save valuable resources and prevent any potential negative effects on

human health and the environment.

(c) Improper disposal of waste batteries and/or accumulators can have serious

effects on the environment and human health as a result of the presence of

hazardous substances in batteries and/or accumulators.

(d) The crossed out wheeled dust bin symbol indicates that

batteries and/or accumulators must be collected and disposed

of separately from household waste.

If the battery or accumulator contains more than the specified

values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined

in the Battery Directive (2006/66/EC), then the chemical symbols for lead

(Pb), mercury (Hg) and/or cadmium (Cd) will be indicated beneath the

crossed out wheeled dust bin symbol.

(e) The return and collection systems are available to the end users. For more

detailed information about disposal of waste batteries and/or accumulators,

please contact your city office, waste disposal service or the shop where you

purchased them.

Pb, Hg, Cd

Any data, including, but not limited to information, described herein are

intended only as illustrations of such data and/or information and not as the

specifications for such data and/or information. TEAC Corporation disclaims

any warranty that any use of such data and/or information shall be free from

infringement of any third party’s intellectual property rights or other propri-

etary rights, and further, assumes no liability of whatsoever nature in the event

of any such infringement, or arising from or connected with or related to the

use of such data and/or information.

This product is designed to help you record and reproduce sound works to

which you own the copyright, or where you have obtained permission from

the copyright holder or the rightful licensor. Unless you own the copyright, or

have obtained the appropriate permission from the copyright holder or the

rightful licensor, your unauthorized recording, reproduction or distribution

thereof may result in severe criminal penalties under copyright laws and inter-

national copyright treaties. If you are uncertain about your rights, contact your

legal advisor. Under no circumstances will TEAC Corporation be responsible for

the consequences of any illegal copying performed using the recorder.

6 TASCAM DR-40

Contents

Introduction..............................................................................................................................7

Included items .........................................................................................................................7

Note about the Reference Manual ..................................................................................7

Precautions for placement and use ................................................................................7

Beware of condensation ......................................................................................................7

Cleaning the unit ....................................................................................................................7

Using the TEAC Global Site .................................................................................................7

User registration .....................................................................................................................7

Names of Parts .........................................................................................................................8

Top .....................................................................................................................................................................8

Front .................................................................................................................................................................8

Left side ..........................................................................................................................................................8

Right side panel ........................................................................................................................................8

Bottom ............................................................................................................................................................9

Home Screen ............................................................................................................................9

Preparation ............................................................................................................................ 10

Powering the unit .................................................................................................................................10

Turning the unit on ..............................................................................................................................10

Selecting a language..........................................................................................................................10

Setting the built-in clock ................................................................................................................. 11

Turning the unit off ............................................................................................................................. 11

Connecting monitoring equipment ........................................................................................ 11

Attaching the tilt foot ....................................................................................................................... 11

Basic operation procedures .............................................................................................11

Menu structure.......................................................................................................................................12

Recording ............................................................................................................................... 12

Recording Screen .................................................................................................................................12

Note about recording standby .................................................................................................... 13

Recording menu structure ............................................................................................................. 13

Manually adjusting the input level............................................................................................14

Using the Level Control Function .............................................................................................. 14

Recording ...................................................................................................................................................14

Setting the low-cut filter ..................................................................................................................14

Playback .................................................................................................................................. 15

Playback Control screen ................................................................................................................... 15

Playback menu structure .................................................................................................................15

Playing back recordings ................................................................................................................... 15

Adjusting the playback volume .................................................................................................. 15

Selecting files for playback (skipping) ....................................................................................15

Quick Operations ................................................................................................................. 16

QUICK button overview ................................................................................................................... 16

Connecting with a Computer ......................................................................................... 16

Connecting with a computer using USB ...............................................................................16

Exchanging files with a computer .............................................................................................16

Disconnecting from a computer ................................................................................................16

Other settings and information .....................................................................................16

Turning the built-in speaker off ................................................................................................... 16

System Settings .....................................................................................................................................16

Quick reference for using various functions............................................................. 17

Messages ................................................................................................................................. 21

Troubleshooting ..................................................................................................................22

Specifications ........................................................................................................................23

Ratings..........................................................................................................................................................23

Inputs and outputs ..............................................................................................................................23

Control input/output ratings ........................................................................................................23

Audio performance .............................................................................................................................23

Recording times.....................................................................................................................................23

Requirements for connected computers ............................................................................. 23

General ........................................................................................................................................................24

TASCAM DR-40 7

Introduction

Thank you very much for purchasing the TASCAM

DR-40.

Before using this unit, read this owner's manual

carefully so that you will be able to use it correctly

and enjoy working with it for many years. After you

have finished reading this manual, please keep it in a

safe place for future reference.

Included items

This product includes the following items.

Take care when opening the package to avoid

damaging the items. Keep the packing materials for

transportation in the future.

Please contact the store where you purchased this

unit if any of these items are missing or have been

damaged during transportation.

• Main unit .................................................................................. × 1

• SD card (in the unit) .......................................................... × 1

• AA alkaline batteries ......................................................... × 3

• USB cable ................................................................................. × 1

• Tilt foot ...................................................................................... × 1

• Owner’s Manual (this manual)

including warranty ............................................................ × 1

Note about the Reference

Manual

This Owner’s Manual explains the main functions

of this unit. Please see the Reference Manual for

information about all the unit’s functions.

You can also download this Owner’s Manual and the

Reference Manual from the TEAC Global Site

(http://teac-global.com/).

prevent this, or if this occurs, let the unit sit for one

or two hours at the new room temperature before

using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not

wipe with chemical cleaning cloths, thinner, alcohol

or other chemical agents. Doing so could damage

the surface or cause discoloration.

Using the TEAC Global Site

You can download this Owner’s Manual and the

Reference Manual necessary for this unit from the

TEAC Global Site (http://teac-global.com/).

1. Open the TEAC Global Site (http://teac-global.

com/).

2. In the TASCAM Downloads section, click the

desired language to open the Downloads

website page for that language.

NOTE

If the desired language does not appear, click

Other Languages.

3. Click the product name in the “Search by Model

Name” section to open the Downloads page for

that product.

4. Select and download the Owner’s Manual and

the Reference Manual that are needed.

User registration

Customers in the USA, please visit the TASCAM

website (http://tascam.com/) to register as a user

online.

Precautions for placement

and use

• The operating temperature range of this unit is

0–40°C (32–104°F).

• Do not install this unit in the following types of

locations. Doing so could degrade the sound

quality and/or cause malfunctions.

Places with significant vibrations

Near windows or other places exposed to

direct sunlight

Near heaters or other extremely hot places

Extremely cold places

Places with bad ventilation or high humidity

Very dusty locations

Places exposed directly to rain or other water

• Do not place this unit on top of a power amplifier

or other device that generates heat.

• If this unit is placed near a power amplifier or

other device with a large transformer, it could

cause a hum. If this occurs, increase the distance

between this unit and the other device.

• This unit could cause color irregularities on a TV

screen or noise from a radio if used nearby. If this

occurs, use this unit farther away.

• This unit might produce noise if a mobile phone

or other wireless device is used nearby to make

calls or send or receive signals. If this occurs,

increase the distance between this unit and those

devices or turn them off.

Beware of condensation

Condensation could occur if the unit is moved from

a cold place to a warm place, it is used immediately

after a cold room has been heated or it is otherwise

exposed to a sudden temperature change. To

8 TASCAM DR-40

Names of Parts

Top

1 Built-in stereo microphone

This is a directional stereo electret condenser

microphone.

2 DUAL indicator

This lights orange when recording in dual

recording mode.

3 4CH indicator

This lights orange when recording in 4-channel

recording mode.

4 OVER DUB indicator

This lights orange when recording in

overdubbing mode.

5 3/4 [SOLO] button

6 1/2 [SOLO] button

7 (HOME) [8] button

8 + button

9 MENU button

0 . button

q PB CONT button

w − button

e Display

r PEAK indicator

t REC MODE button

y RECORD [0] button/REC indicator

When stopped, press this button to put the unit

into recording standby. The REC indicator will

start to blink.

u PLAY [7] button

i QUICK button

o / button

p ENTER/MARK button

a MIXER button

Front

s EXT MIC/LINE IN L/R jacks (XLR/TRS)

d REMOTE jack (φ2.5mm TRS)

Left side

f /LINE OUT jack

g EXT IN switch

h HOLD switch

j INPUT LEVEL (+/−) buttons

Right side panel

k USB port

l SD card slot

TASCAM DR-40 9

Bottom

; Built-in mono speaker

z Tripod or tilt foot mounting threads

(1/4-inch)

x Battery compartment cover

c Strap attachment

v Battery compartment

Home Screen

This is the screen that is usually shown when the unit

is stopped.

1 Playback area

This shows the current playback file area.

ALL: All files in the MUSIC folder

FOLDER: All files in the selected folder

P.LIST: All files added to the playlist

2 Loop/repeat playback status

: Single playback

: Single file repeat playback

: All file repeat playback

: Loop playback

3 Current playback file number/total number

of files

This shows the current file number and total

number of files in the current playback area.

4 Elapsed time

This shows the elapsed time (hours: minutes:

seconds) of the current file.

5 Speaker output

Icon shown: speaker output on

Icon not shown: speaker output off

6 Power supply status

A battery icon appears when power is supplied

by batteries. When batteries are being used,

a battery icon shows the amount of power

remaining in bars ( , , ).

The batteries are almost dead and the power

will soon turn off (standby) if the icon with

no bars appears.

When using a TASCAM PS-P520E AC adapter

(sold separately) or USB bus power,

appears.

7 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

8Stopped

9Paused

7Playing back

,Searching forward

mSearching backward

/Skipping forward

.Skipping backward

8 Level meters

These show the levels of the input and playback

signals.

When overdubbing and in mix mode, the levels

of the mixed input and playback sounds are

shown.

10 TASCAM DR-40

9 Track status

These icons change according to the recording

mode.

Indicator

examples Meaning

Playing a file recorded in MONO

or STEREO mode

Playing a file recorded in DUAL

MONO or DUAL ST mode or

monitoring in these modes

Playing a file recorded in 4CH

mode or monitoring in this mode

/ In OVERDUB SEPARATE mode

/ In OVERDUB MIX mode

0 Loop playback IN (starting) and OUT

(ending) points

The set IN (starting) and OUT (ending) points of

the loop are shown.

The icon appears at the playback position

on the bar when the IN point is set.

The icon appears at the playback position

on the bar when the ending point is set.

q Remaining time

This shows the elapsed time (hours: minutes:

seconds) of the current file.

w Playback speed setting status

One of the following icons appears according

to the playback speed setting.

Icon Playback speed

×1.0

×1.1 – ×1.5

×0.5 – ×0.9

When playback speed not control-

lable

e Effect on/off status

This icon shows whether the effect is on or off.

: Built-in effect off

: Built-in effect on

r Peak value in decibels (dB)

The maximum level that occurs in a fixed period

of time is displayed digitally.

t File name

This shows the name of the file playing back.

When ID3 tag information is available for an

MP3 file being played, it is given priority for

display.

This shows the project name when there are

multiple files recorded in 4-channel recording

mode, dual recording mode or overdubbing

separate mode.

y Playback position

The current playback position is shown by a bar.

Preparation

Powering the unit

8Using AA batteries

1. Remove the battery compartment cover from

the back of the unit.

2. Install 3 AA batteries with their ¥ and ^

marks as shown in the battery compartment.

3. Close the battery compartment cover.

• Use the BATTERY TYPE item of the SYSTEM menu

to set the type of battery in order to accurately

show the amount of power remaining and allow

the unit to accurately determine whether enough

power is available for proper operation. (By

default, this is set to ALKAL for alkaline batteries.)

Turning the unit on

When the unit is off (in standby), press and hold the

(HOME) [8] button until the TASCAM DR-40

start-up screen is shown on the display.

The Home Screen appears after the unit starts up.

Selecting a language

The first time you turn a new unit on after purchase,

the following setting must be made.

A screen appears to set the language shown on the display.

TASCAM DR-40 11

Press the + or − button to move the cursor and select

(highlight with light letters on a black background)

the language to be shown on the display.

English : use English

日本語

: use Japanese

Français : use French

Español : use Spanish

Deutsch : use German

Italiano : use Italian

Русский

: use Russian

中文 : use Chinese

After selection, press the ENTER/MARK button to confirm it.

NOTE

You can change this setting with the SYSTEM

screen LANGUAGE item. (See “Quick reference for

using various functions” on page 17.)

Setting the built-in clock

When the unit is turned on for the first time (or when

the built-in clock is reset after being left unused without

batteries), the DATE/TIME screen appears before the

start-up screen to allow the date and time to be set.

Use the .// and +/− buttons to set the date and

time, and press the ENTER/MARK button to confirm.

Turning the unit off

Press and hold the (HOME) [8] button until

LINEAR PCM RECORDER appears on the display. The

unit turns off after it completes its shutdown process.

Connecting monitoring equipment

To listen with headphones, connect them to the

PHONES jack.

To listen with an external monitoring system

(powered monitor speakers or an amplifier and

speakers), connect it to the LINE OUT jack.

Headphones Powerd monitor speakers

or amplifer and speakers

Attaching the tilt foot

When recording with the built-in mic, you can attach the

included tilt foot to the tripod mounting threads to prevent

the mic from being too low when placing the unit with the

bottom side (battery compartment cover side) down.

When not using the tilt foot, you can put it between

the two protrusions on the inside of the battery

compartment cover for storage and transportation.

Basic operation procedures

1. Press the MENU button to open the MENU

Screen.

2. Use the + and – buttons to select (highlight)

menu items, and press the ENTER/MARK

button to open setting screens.

3. Use the + and – buttons to select the setting

item, and press the ENTER/MARK button.

4. Use the / or ENTER/MARK button to move

the cursor to the right and highlight the setting

value.

5. Use the + and – buttons to change the setting.

6. Press the . button to move the cursor left

if you want to set a different item in the same

menu.

7. Repeat step 3 to 6 as necessary to set other items.

8. When finished, press the (HOME) [8]

button to return to the Home Screen.

12 TASCAM DR-40

Menu structure

MENU

REC SETTING Make recording settings

PLAY SETTING Make playback settings

BROWSE Work with files and

folders on the SD card

SPEAKER Turn the built-in

speaker on/off

OTHERS Open the OTHERS

submenu

INFORMATION View information

TUNER Use the tuner

EFFECT Make effect settings

FILE NAME Make file name settings

DATE/TIME Set the date and time

REMOTE Footswitch and wired

remote control settings

SYSTEM Make system settings

Recording

Recording Screen

y

1 Recording format

This shows the file recording format.

WAV 16, WAV 24, BWF 16, BWF 24, MP3 320k,

MP3 256k, MP3 192k, MP3 128k, MP3 96k,

MP3 64k, MP3 32k

2 Pre or Auto recording function status

appears when the prerecording function is

ON and the unit is in recording standby.

appears when the auto recording function

is ON and the unit is recording.

3 Recording sampling frequency

This shows the file recording sampling

frequency.

44.1k, 48k, 96k

4 Number of recording channels

This shows the number of recording channels

in the file.

ST, MONO

5 Elapsed recording time

The elapsed recording time of the file appears

as hours: minutes: seconds.

6 Built-in stereo microphone left-right

setting

If the left-right setting of the built-in stereo

microphone is not correct for the current mic

angle, the current left-right setting will be

shown.

Icon Mic angle MIC setting

Closed (X-Y) L-R

Open (A-B) R-L

7 Recorder operation status

This icon shows the recorder operation status.

Indicator Meaning

09 Recording standby or recording

paused

0Recording

8 Input source

This icon shows the input source.

Indicator

examples Meaning

Built-in mic set as input source

EXT MIC/LINE IN jack set as input

source

Input source set to DUAL (-6 to

-12) in dual recording mode

Channels 1-2 are a playback file in

OVERDUB SEPARATE mode

Mix of playback file and built-in

mic set as input source in

OVERDUB MIX mode

Mix of playback file and EXT MIC/

LINE IN set as input source in

OVERDUB MIX mode

TASCAM DR-40 13

9 Level meters

These show the input signal levels. When

recording in OVERDUB MIX mode, these show

the levels of the mixed input and playback

sounds. The b mark at the −12dB position on

the scale is a guide for input level adjustment.

0 File name

The file name that will automatically be given

to recorded files is shown.

This shows the project name when there are

multiple files recorded in 4-channel recording

mode, dual recording mode or overdubbing

separate mode.

q Remaining recording time

This shows the remaining recording time until

the set maximum file size is reached (in hours:

minutes: seconds). If the remaining recording

time on the SD card is less, however, the

remaining recording time on the card is shown.

w Low cut filter on/off status

This shows whether the low cut filter is on or

off. This icon is shown as light letters on a dark

background if the low-cut filter is set to 40Hz,

80Hz or 120Hz.

: Low cut filter off

: Low cut filter on

e Level control function status

: Level control off

: Peak reduction on

: Automatic level control on

: Limiter on

r Effect on/off status

: Built-in effect off

: Built-in effect on

t Peak value in decibels (dB)

This shows the peak input level value digitally.

y Auto tone function status

This icon shows whether the auto tone function

is on.

Blank : Auto tone off

: Auto tone on

Note about recording standby

This unit has a recording standby function like that of

a professional recorder. In recording standby mode,

you can adjust the input level, for example, and then

start recording quickly.

When in recording standby, the REC indicator blinks

and the recording screen appears.

Recording menu structure

REC SETTING

FORMAT Set the file format

BWF: 16bit / 24bit

WAV: 16bit / 24bit

MP3: 32 – 320k bps

SAMPLE Set the sampling frequency

44.1k / 48k / 96k (Hz)

(96kHz for WAV only)

TRACK INC Set the automatic track incre-

mentation time

OFF, 5min, 10min, 15min, 30min,

60min

LOW CUT Set the low-cut filter

OFF, 40Hz, 80Hz, 120Hz

PRE REC Set the pre-recording function

ON, OFF

AUTO REC Set the auto-recording function

MODE : OFF , NEW FILE , MARK

LEVEL :

-6dB , -12dB , -24dB , -48dB

AUTO TONE Set the auto tone function

OFF, HEAD, HEAD+TAIL

TONE SECS Set the length of the auto tone

0.5SEC. , 1SEC. , 2SEC. , 3SEC.

TONE VOL Set the volume of the auto tone

-12dB , -18dB , -24dB , -30dB ,

-36dB

14 TASCAM DR-40

Manually adjusting the input level

1. Press the RECORD [0] button to enter

recording standby.

2. Use the INPUT LEVEL + and − buttons to

adjust the input level. Meters that show the

input level settings appear at the bottom of the

display.

If the input is too high, the PEAK indicator on the

right above the display lights just before recorded

sound would distort.

The level meters have a b mark as a guide at −12dB.

Set the recording level so that level changes occur

near this mark without causing the PEAK indicator

to light red.

Using the Level Control Function

You can set the level control function for recording

with a microphone input.

1. Press the RECORD [0] button to enter

recording standby.

2. Press the QUICK button to open the quick

menu.

3. Select (highlight) LEVEL CTRL and press the

ENTER/MARK button to open the settings

screen.

4. Select one of the following functions, and press

the ENTER/MARK button to enable it and

return to the recording screen.

8PEAK REDUCTION

This function reduces the input volume automati-

cally to a suitable level when input signals are too

loud. The recording level can be raised manually

when desired. This function is useful when recording

music that has volume changes that affect the sound

negatively. After making this setting, the set level is

retained even if it is turned off.

8AUTO LEVEL

Using this function, the recording level is automati-

cally increased when the input sound is too quiet or

decreased when it is too loud. This function is useful

for recording meetings, for example. In this mode,

the recording level cannot be changed manually.

8LIMITER

This function prevents distortion when signals that

are too loud are input suddenly. This is useful when

you do not want to change the recording level.

In this mode, the recording level can be changed

manually even when recording.

Recording

1. Press the RECORD [0] button to enter

recording standby.

2. Press the RECORD [0] button again to start

recording.

3. Press the (HOME) [8] button to finish

recording.

When recording starts, the REC indicator lights

continuously, and the display shows the elapsed

recording time and the remaining recording time.

Pausing recording

You can pause recording and then continue

recording in the same file.

1. When recording, press the RECORD [0]

button to pause.

2. Press the RECORD [0] button again to resume

recording.

Setting the low-cut filter

Use the low-cut filter if you want to cut noise and

other sounds at low frequencies. This function

can be used to reduce air-conditioning noise and

unpleasant wind noise, for example.

1. Select MENU w REC SETTING menu item and

press the ENTER/MARK button.

2. Set the LOW CUT item on the REC SETTING

screen.

Options: OFF, 40Hz, 80Hz, 120Hz

The higher the number (frequency) is, the wider

the band of low frequencies that will be cut.

TASCAM DR-40 15

Playback

Playback Control screen

During playback or when stopped, press the PB

CONT button to open the Playback Control screen.

Recording is not possible when this screen is open.

Use the . and / buttons to skip to IN/OUT

points and the file beginning/end. You cannot skip

to the previous or next file.

1 Loop playback status

The icon appears when loop playback is

enabled.

2 Playback speed

This shows the playback speed as a multiple

of the normal speed. VSA appears on the left

when variable speed audition, which allows

tempo to be changed without changing pitch,

is enabled.

3 Usable buttons

This shows the functions of the buttons

available when the Playback Control screen is

open.

MENU: Turn loop playback ON or OFF.

ENTER: Create or delete an IN or OUT point.

4 Loop playback IN (starting) and OUT

(ending) points

The set IN (starting) and OUT (ending) points of

the loop are shown.

The icon appears at the playback position

on the bar when the IN point is set.

The icon appears on the playback position

bar when the ending point is set.

5 Playback position display

The current playback position is shown by a bar.

Playback menu structure

PLAY SETTING

AREA Set the playback area

ALL FILES, FOLDER,

PLAYLIST

REPEAT Set the repeat mode

CONTINUOUS, SINGLE,

1 REPEAT, ALL REPEAT

PLAYEQ Set the playback equalizer

OFF, TREBLE+/-, MIDDLE+/-,

BASS+/-

JUMPBACK Set jump-back playback

OFF, 1SEC. – 10SEC. ,

20SEC. , 30SEC.

Playing back recordings

When the Home Screen is open and playback is

stopped, press the 7 button to start playback.

8Pausing

When the Home Screen is open and a track is playing

back, press the (HOME) [8] button to pause

playback at the current position.

8Stopping

Press the (HOME) [8] button when paused to

return to the beginning of the playback file and stop.

8Searching backward and forward

When the Home Screen is open, press and hold the

. or / button to search backward or forward.

Adjusting the playback volume

When the Home Screen is open, use the + and −

buttons to adjust the volume.

Selecting files for playback

(skipping)

When the Home Screen is open, use the . and

/ buttons to select the file that you want to play.

Press the . button when located at the

beginning of a file to skip to the beginning of the

previous file.

When the Home Screen is open during playback,

press the / button to skip to the next file.

16 TASCAM DR-40

Quick Operations

QUICK button overview

The QUICK button provides access to functions that

are convenient according to the situation.

Screen State Action

Home

Screen

Stopped/

paused

Show delete, divide, level

alignment and mixdown

functions

Playing

back

Show level alignment

function

Recording

standby

Show level control functions

and built-in stereo micro-

phone left-right setting

Playback Control

screen

Open menu with just level

alignment function

BROWSE screen,

PLAYLIST screen

Open pop-up menu for

working with selected file (or

folder)

TUNER screen −

MENU screen, OTHERS

submenu screen,

other settings screens

−

Connecting with a Computer

You can transfer audio files on the SD card in the unit

to a computer, as well as transfer audio files from the

computer to the unit.

Connecting with a computer

using USB

1. Use the included USB cable to connect the unit

to a computer. If the unit is off, turn it on.

2. On the USB SELECT screen, select STORAGE,

and press the ENTER/MARK button to connect

this unit to the computer. USB connected will

appear on the display.

3. This unit appears on the computer as an

external drive named “DR-40.”

Exchanging files with a computer

On the computer screen, open the “Computer”

directory, and double click the “DR-40” drive to show

the “MUSIC” and “UTILITY” folders.

To transfer files to the computer, open the “MUSIC”

folder and drag and drop the desired files to destina-

tions of your choice.

To transfer files from the computer, drag and drop

the desired audio files on the computer to the

“MUSIC” folder.

Disconnecting from a computer

Before disconnecting the USB cable, use the proper

procedures for the computer to unmount this unit.

The power turns off after the unit completes its

shutdown process.

See the computer’s operation manual for instruc-

tions about how to unmount an external volume.

Other settings and information

Turning the built-in speaker off

Open MENU w SPEAKER w SPEAKER and set it to

OFF.

System Settings

Use the SYSTEM menu to make various settings to

use the unit as you like. You can also initialize settings

and format SD cards, for example.

1. Select MENU w OTHERS w SYSTEM, and press

the ENTER/MARK button.

2. Make the necessary settings using the various

functions.

TASCAM DR-40 17

Quick reference for using various functions

• Button names are shown like this: MENU.

• Instructions are abbreviated. For example, on the Home Screen, press the MENU button, select the REC SETTING menu, and then select the PRE REC item becomes:

Home Screen w MENU w REC SETTING w PRE REC.

Not all steps are given for complex operations. For detailed operation procedures, see the Reference Manual.

Category Desired action Function name Procedures, buttons used and explanation

Basic

functions

Return to the Home Screen HOME

Return to the Home Screen if you become unsure about how to proceed.

Record in stereo Home Screen w RECORD w RECORD

Recording will start using the current settings.

Play a recording Home Screen w PL AY

Play the file shown (selected).

Adjust the playback volume Home Screen w +/−

Adjust the volume of headphones, speakers, etc.

Select a file for playback Home Screen w .//

If there a many files, using the browse function might be more convenient.

Recording

Change the file format Home Screen w MENU w REC SETTING w FORMAT

Set the file format used for recordings, including whether they are uncompressed (WAV) or

compressed (MP3).

Set the low-cut filter Low cut filter Home Screen w MENU w REC SETTING w LOW CUT

This function removes noise and other sounds at low frequencies. Set the cutoff frequency.

Adjust the input level manually Home Screen w RECORD w INPUT LEVEL +/−

Watch the meters and set the recording level so that they do not peak.

Adjust the input level automati-

cally

Peak reduction Home Screen w RECORD w QUICK w LEVEL CTRL w PEAK REDUCTION

This function automatically lowers the level when the recording level would overload.

Adjust the input level automati-

cally

Auto level Home Screen w RECORD w QUICK w LEVEL CTRL w AUTO LEVEL

This function automatically adjusts the level in response to the loudness of the input signal.

Adjust the input level automati-

cally

Limiter Home Screen w RECORD w QUICK w LEVEL CTRL w LIMITER

This function compresses only loud sounds to prevent overloads and does not change the recording

level.

18 TASCAM DR-40

Category Desired action Function name Procedures, buttons used and explanation

Recording

Record with both the built-in mic

and an external input at the same

time

Home Screen w REC MODE w REC MODE w 4CH

The built-in mic will be recorded to tracks 1-2 and the external inputs will be recorded to tracks 3-4.

Use phantom power Left side of unit w EXT IN w MIC + PHANTOM

Phantom power necessary for condenser mics can be supplied.

Handle mid-side mic recording Mid-side decoding Home Screen w REC MODE w MS DECODE

This unit has a mid-side decoding function. This function is available when external input is selected

in STEREO, DUAL and 4CH modes.

Simultaneously record a backup

at a lower level

Dual recording Home Screen w REC MODE w REC MODE w DUAL

You can simultaneously record a backup in case the main recording becomes distorted.

Add reverb to the input signal

and record it

Reverb effect Home Screen w MENU w OTHERS w EFFECT

You can record a signal after adding the reverb effect.

Other

recording

features

Create a new file manually while

recording

Manual track incre-

mentation

Recording Screen w /

Use this function to create a new file without interrupting recording when, for example, the song

changes.

Set automatic file division Automatic track

incrementation

Home Screen w MENU w REC SETTING w TRACK INC

This function can be used to automatically create new files at set intervals and continue recording

without interruption.

Start recording a moment before

pressing RECORD

Pre-recording Home Screen w MENU w REC SETTING w PRE REC

When the unit is in recording standby, this function allows the unit to record a few seconds before

the RECORD button is pressed.

Use the self-timer to record Self-timer Home Screen w RECORD w PB CONT

This self-timer function is convenient when you want to record your own performance.

Automatically start recording at a

set level

Automatic

recording

Home Screen w MENU w REC SETTING w AUTO REC

Recording will start automatically when an input signal is detected.

Other

playback

features

Enable repeat playback Repeat playback Home Screen w MENU w PLAY SETTING w REPEAT

This function allows you to repeat playback of a specific file.

Repeat playback between two

points in a file

Loop playback Playback Control screen w PB CONT w ENTER/MARK

This function allows you to repeat playback of a specific interval in a single file.

Change playback speed VSA Playback Control screen w PB CONT w +/−

This function allows you to change the speed of playback.

TASCAM DR-40 19

Category Desired action Function name Procedures, buttons used and explanation

Other

playback

features

Use the playback equalizer Playback equalizer Home Screen w MENU w PLAY SETTING w PLAYEQ

This function allows you to increase or decrease the levels of the high or low frequencies during

playback to improve the sound quality.

Go back a few seconds during

playback and play a part again

Jump-back

playback

During playback w PLAY

When used during playback, this function allows you to go back and play the preceding few seconds

again.

Change the jump-back playback

settings

Jump-back

playback

Home Screen w MENU w PLAY SETTING w JUMPBACK

You can set how far to go back when using the jump-back playback function.

Even out the volume during

playback

Level alignment Home Screen w QUICK w LEVEL ALIGN

This function makes recordings sound more even by adjusting the playback volume.

Select the playback area Home Screen w MENU w PLAY SETTING w AREA

You can select a folder or playlist as the play area from which files can be chosen.

Other

features

Tune an instrument Chromatic tuner Home Screen w MENU w OTHERS w TUNER

You can use this unit to help tune a guitar or other instrument.

Add reverb to the recorded signal

during playback

Reverb effect Home Screen w MENU w OTHERS w EFFECT

You can use the reverb effect when listening to a recording without affecting the recorded file.

Adjust the volume of a four-track

recording

Home Screen w MIXER

You can adjust the volume of each track independently. You can also use the mix down function to

combine them into a stereo file.

Merge four-track recordings into

a stereo file

Mixdown function Home Screen w QUICK w MIXDOWN

You can use the MIXER to adjust volume levels when creating a stereo file.

Change RC-3F footswitch assign-

ments

Home Screen w MENU w OTHERS w REMOTE

You can change the footswitch assignments according to the application.

Use an RC-10 remote control to

operate the unit

Home Screen w MENU w OTHERS w REMOTE

Set the unit so that you can use a wired remote control.

Record a slate tone Auto tone Home Screen w MENU w REC SETTING w AUTO TONE

The unit can automatically add a tone when beginning and ending recordings.

File

opera-

tions

Check file information Home Screen w MENU w BROWSE w +/− w QUICK w INFO

Use this function to check recording dates and file sizes, for example.

Add a file to the playlist Home Screen w MENU w BROWSE w +/− w QUICK w ADD LIST

You can make a playlist that includes specific files.

Delete a file Home Screen w MENU w BROWSE w +/− w QUICK w FILE DEL

You can delete files that you do not need.

Delete a file Home Screen w QUICK w DELETE

You can delete files that you do not need.

20 TASCAM DR-40

Category Desired action Function name Procedures, buttons used and explanation

File

opera-

tions

Delete all files in a folder at the

same time

Home Screen w MENU w BROWSE w +/− w QUICK w ALL DEL

You can delete all the files in a folder at the same time.

Divide a file Divide Home Screen w QUICK w DIVIDE

Use this function to divide one file into two files.

Divide a file at a mark Automatic division Home Screen w QUICK w AUTO DIVIDE

Use this function to divide files automatically at marks. This can be used to separate songs.

Unit

settings

Set the language shown Home Screen w MENU w OTHERS w SYSTEM w LANGUAGE

Use this to set the language shown on the display.

Set the date and time Home Screen w MENU w OTHERS w DATE/TIME

Use this function to set the internal clock, which is used for the recording dates written to files, for

example.

Turn the speaker off Home Screen w MENU w SPEAKER w OFF

Use this to stop sound output from the speaker on the back of the unit.

Check unit and card information Home Screen w MENU w OTHERS w INFORMATION

Use this function to check the unit firmware version and the remaining space on the card, for

example.

Change the power saving

function setting

Automatic power

saving

Home Screen w MENU w OTHERS w SYSTEM w AUTO PWR SAVE

This function automatically turns the unit off when it is not used for some time.

Change the backlight setting Home Screen w MENU w OTHERS w SYSTEM w BACKLIGHT

Use this to change the display backlight setting.

Adjust the display contrast Home Screen w MENU w OTHERS w SYSTEM w CONTRAST

Use this to set the contrast of the characters on the display.

Set the battery type Home Screen w MENU w OTHERS w SYSTEM w BATTERY TYPE

Select the type of battery being used. This setting affects the accuracy of the remaining battery

display.

Restore the unit to its default

settings

Initialize Home Screen w MENU w OTHERS w SYSTEM w INITIALIZE

Use this function to restore all settings to their factory defaults.

Quickly format an SD card Quick format Home Screen w MENU w OTHERS w SYSTEM w QUICK FORMAT

Use this function to format cards. You should usually use the quick format function to format a card.

Completely format an SD card Erase format Home Screen w MENU w OTHERS w SYSTEM w ERASE FORMAT

Use this only when you want to completely erase the data on a card.

Set the file name format Home Screen w MENU w OTHERS w FILE NAME

You can change the characters used in automatically-assigned file names.

La page charge ...

Tascam DR 40 Manuel utilisateur

Ce manuel convient également à

Tascam DR 40 Manuel utilisateur

Documents connexes