Bestway 58516 Le manuel du propriétaire

Marque: Bestway

Modèle: 58516

Catégorie: Accessoires de piscine hors terre

Taper: Le manuel du propriétaire

OWNER’S MANUAL

bestwaycorp.com/support

Visit Bestway YouTube channel

58516 Hmax 1.5 m

WE SUGGEST NOT TO RETURN

THE PRODUCT TO THE STORE

QUESTIONS? PROBLEMS?

MISSING PARTS?

For FAQ, Manuals, Videos Or

Spare Parts, Please Visit

bestwaycorp.com/support

WARNING

IMPORTANT SAFETY

INSTRUCTIONS

When installing and using this electrical equipment, basic

safety precautions should always be followed, including the

following:

READ AND FOLLOW ALL

INSTRUCTIONS

WARNING - TO REDUCE THE RISK OF INJURY, do not

permit children to use this product unless they are closely

supervised at all times.

WARNING - RISK OF ELECTRIC SHOCK - Connect only to

a grounding type receptacle protected by a ground-fault

circuit-interrupter (GFCI). Contact a qualified electrician if you

cannot verify that the receptacle is protected by a GFCI.

CAUTION - To reduce the risk of electric shock the pool must

be installed no closer than 1.8 m (6 feet) from any electrical

outlet. Do not place portable appliances closer than 1.5 m (5

feet) from the pool.

DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

WARNING - To reduce the risk of electric shock, replace

damaged cord immediately.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

WARNING - To reduce the risk of electric shock, do not use

extension cord to connect unit to electric supply; provide a

properly located outlet.

CAUTION: This pump is for use with storable pools only. Do

not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily

disassembled for storage and reassembled to its original

integrity. A permanently-installed pool is constructed in or on

the ground or in a building such that it cannot be readily

disassembled for storage.

WARNING - This appliance is not intended for use by

persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that

they do not play with the appliance.

Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD) having a

rated residual operating current not exceeding 30 mA.

Please examine and verify all sand filter components are

present before use. Notify Bestway at the customer service

address listed on this manual for any damaged or missing

parts at the time of purchase.

• THERMALLY PROTECTED MOTOR. CSA ENCLOSURE 3

• FOR USE WITH SWIMMING POOLS ONLY.

• CAUTION: TO ENSURE CONTINUED PROTECTION

AGAINST SHOCK HAZARD, USE ONLY IDENTICAL

REPLACEMENT PARTS WHEN SERVICING.

• WARNING: RISK OF ELECTRIC SHOCK. CONNECT

ONLY TO A GROUNDING TYPE RECEPTACLE

PROTECTED BY A GROUND-FAULT CIRCUIT

INTERRUPTER (GFCI).

• CAUTION: THIS PUMP IS FOR USE WITH STORABLE

POOLS ONLY - DO NOT USE WITH

PERMANENTLY-INSTALLED POOLS.

• CAUTION: CONNECT ONLY TO GROUNDING TYPE

RECEPTACLE PROTECTED BY A CLASS A GROUND

FAULT CIRCUIT INTERRUPTER.

• CAUTION: FOR CONTINUED PROTECTION AGAINST

POSSIBLE ELECTRIC SHOCK THIS UNIT IS TO BE

MOUNTED TO THE BASE IN ACCORDANCE WITH THE

INSTALLATION INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

SAND FILTER

OWNER’S MANUAL

Visit Bestway YouTube

channel

SAFETY INSTRUCTIONS

WE SUGGEST NOT TO RETURN

THE PRODUCT TO THE STORE

QUESTIONS? PROBLEMS?

MISSING PARTS?

For FAQ, Manuals, Videos Or

Spare Parts, Please Visit

bestwaycorp.com/support

WARNING

IMPORTANT SAFETY

INSTRUCTIONS

When installing and using this electrical equipment, basic

safety precautions should always be followed, including the

following:

READ AND FOLLOW ALL

INSTRUCTIONS

WARNING - TO REDUCE THE RISK OF INJURY, do not

permit children to use this product unless they are closely

supervised at all times.

WARNING - RISK OF ELECTRIC SHOCK - Connect only to

a grounding type receptacle protected by a ground-fault

circuit-interrupter (GFCI). Contact a qualified electrician if you

cannot verify that the receptacle is protected by a GFCI.

CAUTION - To reduce the risk of electric shock the pool must

be installed no closer than 1.8 m (6 feet) from any electrical

outlet. Do not place portable appliances closer than 1.5 m (5

feet) from the pool.

DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

WARNING - To reduce the risk of electric shock, replace

damaged cord immediately.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

WARNING - To reduce the risk of electric shock, do not use

extension cord to connect unit to electric supply; provide a

properly located outlet.

CAUTION: This pump is for use with storable pools only. Do

not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily

disassembled for storage and reassembled to its original

integrity. A permanently-installed pool is constructed in or on

the ground or in a building such that it cannot be readily

disassembled for storage.

WARNING - This appliance is not intended for use by

persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that

they do not play with the appliance.

Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD) having a

rated residual operating current not exceeding 30 mA.

Please examine and verify all sand filter components are

present before use. Notify Bestway at the customer service

address listed on this manual for any damaged or missing

parts at the time of purchase.

• THERMALLY PROTECTED MOTOR. CSA ENCLOSURE 3

• FOR USE WITH SWIMMING POOLS ONLY.

• CAUTION: TO ENSURE CONTINUED PROTECTION

AGAINST SHOCK HAZARD, USE ONLY IDENTICAL

REPLACEMENT PARTS WHEN SERVICING.

• WARNING: RISK OF ELECTRIC SHOCK. CONNECT

ONLY TO A GROUNDING TYPE RECEPTACLE

PROTECTED BY A GROUND-FAULT CIRCUIT

INTERRUPTER (GFCI).

• CAUTION: THIS PUMP IS FOR USE WITH STORABLE

POOLS ONLY - DO NOT USE WITH

PERMANENTLY-INSTALLED POOLS.

• CAUTION: CONNECT ONLY TO GROUNDING TYPE

RECEPTACLE PROTECTED BY A CLASS A GROUND

FAULT CIRCUIT INTERRUPTER.

• CAUTION: FOR CONTINUED PROTECTION AGAINST

POSSIBLE ELECTRIC SHOCK THIS UNIT IS TO BE

MOUNTED TO THE BASE IN ACCORDANCE WITH THE

INSTALLATION INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

WARNING

IMPORTANT SAFETY

INSTRUCTIONS

When installing and using this electrical equipment, basic

safety precautions should always be followed, including the

following:

READ AND FOLLOW ALL

INSTRUCTIONS

WARNING - TO REDUCE THE RISK OF INJURY, do not

permit children to use this product unless they are closely

supervised at all times.

WARNING - RISK OF ELECTRIC SHOCK - Connect only to

a grounding type receptacle protected by a ground-fault

circuit-interrupter (GFCI). Contact a qualified electrician if you

cannot verify that the receptacle is protected by a GFCI.

CAUTION - To reduce the risk of electric shock the pool must

be installed no closer than 1.8 m (6 feet) from any electrical

outlet. Do not place portable appliances closer than 1.5 m (5

feet) from the pool.

DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

WARNING - To reduce the risk of electric shock, replace

damaged cord immediately.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

WARNING - To reduce the risk of electric shock, do not use

extension cord to connect unit to electric supply; provide a

properly located outlet.

CAUTION: This pump is for use with storable pools only. Do

not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily

disassembled for storage and reassembled to its original

integrity. A permanently-installed pool is constructed in or on

the ground or in a building such that it cannot be readily

disassembled for storage.

WARNING - This appliance is not intended for use by

persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for

their safety. Children should be supervised to ensure that

they do not play with the appliance.

Electric installations should follow national wiring rules,

consult a qualified electrician with any questions.

The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD) having a

rated residual operating current not exceeding 30 mA.

Please examine and verify all sand filter components are

present before use. Notify Bestway at the customer service

address listed on this manual for any damaged or missing

parts at the time of purchase.

• THERMALLY PROTECTED MOTOR. CSA ENCLOSURE 3

• FOR USE WITH SWIMMING POOLS ONLY.

• CAUTION: TO ENSURE CONTINUED PROTECTION

AGAINST SHOCK HAZARD, USE ONLY IDENTICAL

REPLACEMENT PARTS WHEN SERVICING.

• WARNING: RISK OF ELECTRIC SHOCK. CONNECT

ONLY TO A GROUNDING TYPE RECEPTACLE

PROTECTED BY A GROUND-FAULT CIRCUIT

INTERRUPTER (GFCI).

• CAUTION: THIS PUMP IS FOR USE WITH STORABLE

POOLS ONLY - DO NOT USE WITH

PERMANENTLY-INSTALLED POOLS.

• CAUTION: CONNECT ONLY TO GROUNDING TYPE

RECEPTACLE PROTECTED BY A CLASS A GROUND

FAULT CIRCUIT INTERRUPTER.

• CAUTION: FOR CONTINUED PROTECTION AGAINST

POSSIBLE ELECTRIC SHOCK THIS UNIT IS TO BE

MOUNTED TO THE BASE IN ACCORDANCE WITH THE

INSTALLATION INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

Filter Diameter:

Effective Filter Area:

Max. Operating Pressure:

Working sand filter pressure:

Max. Water Temperature:

Sand:

Sand Size:

Sand Capacity:

270 mm

0.059 m2 (0.635 ft2)

0.42 Bar (6 PSI)

< 0.25 Bar (3.5 PSI)

35°C

Not included

#20 silica sand, 0.45-0.85 mm

Approximately 8.5 kg

703 mm

311 mm

270 mm

Before assembling the sand filter, take a few minutes to

become familiar with all the sand filter parts.

SPECIFICATIONS

PARTS REFERENCE OVERVIEW

19 21

20 8

910 10

(P61318ASS16)(P6680ASS16)

(P61322ASS16)

REF.NO

SPARE PART NO.

A B C

1 1 1 1

2 1 1 1

3 1 1 1

4 2 2 2

5 1 1 1

6 3 3 3

7 2 2 2

8 7 4 4

9 10 4 6

10 3 1 1

11 2 2 2

12 1 1 1

1 1 1

3 3 3

1 1 1

2 2 2

2 0

0 0

1 0 1

1 0 0

P61138ASS16

P03822

P03830

P03823

P03825

P03829

P03824

P6005ASS16

P6124ASS16

P6132ASS16

P03828

P05885

P6614ASS16

P6029ASS16

P6149ASS16

P6660ASS16

P6661ASS16

P6662ASS16

P6663ASS16

P6664ASS16

P6665ASS16

P6019ASS16

P61322ASS16

P6680ASS16

P61318ASS16

P6362ASS16

X1 X1

(You will need a screwdriver.)

1. Carefully remove all components from the package and check to

ensure nothing is damaged. If equipment is

damaged, immediately notify the retailer from

where the equipment was purchased.

2. The sand filter should be placed on solid, level

ground, preferably a concrete slab. Position the

sand filter so the Ports and Control Valve are

accessible for operation, servicing and winterizing.

3. The sand filter must be vertically fixed on ground or a certain pedestal

made of wood or concrete before use to prevent the sand filter from

accidentally falling. Fully assembled sand filter will exceed 18 kg. The

mounting holes should be 8 mm in diameter and spaced 285 mm apart.

Use two bolts and nuts with a maximum of 8 mm in diameter to fasten

the sand filter to the pedestal.

Ø8 mm

285 mm

LOAD POOL-GRADE FILTER SAND/FLOWCLEAR™ POLYSPHERE.

NOTE: Use only special pool-grade filter sand, free of all limestone or clay: #20

Silica sand 0.45-0.85 mm, approximately one 8.5 kg bag should suffice. If you do

not use the recommended size filter sand, filtering performance will be reduced

and the sand filter may damaged, thereby voiding warranty.

NOTE: To avoid damaging the Skimmer when adding sand, pour some water

into the Bottom Tank to submerse the Skimmer on the Collector Hub.

NOTE: Sand/

Flowclear™ Polysphere not included

NOTE:

Use 28 g (0.06 lbs) Flowclear™ Polysphere to replace

1 kg (2.20 lbs) sand.

ASSEMBLY

#20

0.45-0.85 mm

MAX.

MIN.

FOR POOL WITH 2 VALVES

CONNECT TO THE POOL

For 38 mm(1.5 in)

connection

P61318ASS16

P61322ASS16

Garden hose (not

included)

For Drain, Backwash,

Rinse function

FOR POOL WITH 3 VALVES

Garden hose (not

included)

For Drain, Backwash,

Rinse function

P61318ASS16

P6680ASS16

CONTROL VALVE OVERVIEW

WARNING: To prevent equipment damage

and possible injury, always switch off sand

filter before changing the Control Valve

function. Changing valve positions while

the pump is running can damage the

Control Valve, which may cause personal

injury or property damage.

How to Use the Control Valve:

Press down on the Control Valve handle

and rotate to desired function.

CONTROL VALVE FUNCTIONS

The Control valve is used to select 6

different filter functions: Filter, Closed,

Backwash, Rinse, Drain and Circulate.

Filter: This function is used to

filter pool water and should be

positioned here 99% of the time.

Water is pumped through the sand

filter, where it is cleaned and

returned to the pool.

Closed: This function stops

water flowing between the sand

filter and the pool.

Before switching on, please read the manual carefully.

STOP

OPERATION

Drain: This function drains

water from the pool; another filter

bypass setting, water is pumped

and deposited out of Port D,

instead of returning it to the pool.

Circulate: This function

circulates pool water bypassing the

sand filter; use this function if the

filter is broken to collect debris in

the Debris Screens.

Backwash: This function is

used to clean the sand bed; water

is pumped down through the

Collector Hub, upwards through

the sand bed, and deposited out

of Port D.

Rinse: This function for initial startup,

cleaning, and sand bed leveling after

Backwash; water is pumped downwards

through the sand bed, up through

the Collector Hub and deposited

out of the valve Port D.

NOTE:

• Be sure all provisions for wastewater disposal meet applicable local, state or

national codes. Do not discharge water where it will cause flooding or damage.

• When the Control Valve is set to the Backwash, Rinse, or Drain position, water

will discharge from Port D on the Control Valve.

• Do not switch on or operate the sand filter with the Control Valve set to the

Closed function or it will seriously damage the sand filter.

• Do not set the Control Valve between two functions, or it will lead to leaking.

• To avoid water leakage, screw the Port D Cap onto the Control Valve Port D

before operating the sand filter.

AIR RELEASE

Press down the control valve handle and wait untill the water

flow from Port D to release the air.

NOTE: It is important to repeat this operation every time you

start the pump after winterizing, maintenance and

backwashing the sand bed.

FIRST TIME USE INSTRUCTIONS

Backwash and Rinsing must be performed to prepare the pump for

its first use and to wash the sand.

CAUTION: DO NOT DRY RUN THE

SAND FILTER

1. Press down on the Control Valve handle and

rotate to the Backwash function.

2. Plug in and run the sand filter for 3-5 minutes, or until the water runs

clear.

3. Switch off the sand filter and set the Control Valve to the Rinse function.

4. Switch on the sand filter and run the sand filter for 1 min. This circulates

water backwards through the sand filter and drains water out Port D.

5. Switch off the sand filter. Set the Control Valve to the Closed function.

6. Top up pool water if required.

IMPORTANT: This procedure removes water from the pool, which

you’ll need to replace.

Switch off the sand filter immediately if water levels near the pool’s Inlet

and Outlet valves.

1. Now the sand filter is ready for use. Set the

Control Valve to the Filter function.

NOTE: To prevent the risk of electrical shock

dry any excess water from yourself and the sand

filter.

2. Switch on the sand filter to run it.

NOTE: The sand filter has now started its

filtering cycle. Check that water is returning to

the pool and take note of the filter pressure on Pressure Gauge.

Generally, the recommended sand filter pressure is less than

0.25 Bar (3.5 PSI) when it is running.

Backwash Rinsing

CAUTION: You must ensure the sand filter is

switched off and unplugged before any

maintenance begins or severe risk of injury or

death exists. As dirt builds up in the sand

filter, the pressure reading on Pressure Gauge

will increase. When the Pressure Gauge is

0.25 Bar (3.5 PSI) or higher, or water flow to

the pool is too low, it is time to clean the sand.

To clean the sand bed, follow all instructions outlined previously in:

Backwash and Rinsing.

NOTE: Pressure gauge is for maintenance purpose only, and the

pressure gauge value is just for reference, it should not be used as a

precision instrument.

NOTE: We recommend you clean the sand bed once a month or less

regularly depending on how often the pool is used. Do not clean the

sand too frequently.

1. Switch off the sand filter and set the Control

Valve to the Closed function.

2. Replace the Debris Screens with Stopper

Plugs to prevent water from escaping.

3. Remove the Strainer Cover by unscrewing it.

4. Take out the Strainer, remove any debris.

5. Put the Strainer back into position. Ensure

the hole in the strainer is aligned.

6. Ensure the Seal Ring is in place. Secure the

Strainer Cover back.

7. Remove the Stopper Plugs and insert the Debris Screens.

NOTE: The Strainer must be emptied and cleaned periodically. A

dirty or blocked strainer will reduce the performance of the sand filter.

1. Switch off the sand filter and set Control Valve to the Drain

function.

2. Detach the Hose from the pool’s Port A and sand filter Port A and

SAND FILTER MAINTENANCE

CLEANING THE STRAINER

LOWERING OR DRAINING POOL WATER

1.6

10 15

1.4

1.2

0.8

0.6

0.4

0.2

psi

bar

Problems Probable Causes Solutions

Sand is flowing to the pool

- Sand is too small

- Move the control valve from the backwash

to the filter function without stop the sand

filter

- The level of the sand is too high

- The skimmer is broken

- Recommend 0.45 mm to 0.85 mm #20

silica sand

- Stop the sand filter every time set the

control valve

- Check if the level of the sand is between

the marked

“MAX” and “ MIN” on the collector hub

- Replace the skimmer

No water flow

Excessive filter pressure

- Dirty filter

- Calcified sand bed

- Insufficient backwashing

- The pressure gauge is broken

- Backwash

- Inspect sand and change if necessary

- Backwash until water runs clear

- Replace the pressure gauge

Control Valve leaks

from the port D

Connectors leak

- Control Valve is set between two functions

- The gasket is broken

- Set to one function

- Replace the gasket

- Washer of the connectors not in place

- Washer of the connectors broken

- O-ring on the hose connection is broken

- Loose Hoses

- Reposition the washer

- Replace the washer

- Replace the O-ring

- Tighten them

- Stopper plugs were not removed

- Air was not released

- The control valve is set to Closed

- The strainer is blocked

- Sand filter broken

- Remove the stopper plugs and insert the

debris screens

- Release the air

- Set to filter function

- Clean the strainer

- Call for service

attach to Port D.

NOTE: Remember to replace the Debris Screen with Stopper Plug

to prevent water from escaping.

3. Switch on the sand filter to run the filter and remove the pool

water.

WARNING: DO NOT DRY RUN THE SAND FILTER.

In areas that have freezing winter temperatures, pool equipment

must be winterized to protect against damage. Allowing water to

freeze will damage the sand filter and void warranty.

1. Backwash the sand filter.

2. Drain the pool according to the pool owner’s manual.

3. Disconnect the two Hoses from the pool and the sand filter.

4. Completely pour the sand out of the tank and dry all components.

5. Store the sand filter in a dry location out of child’s reach.

STORAGE

TROUBLESHOOTING

ATTENTION

IMPORTANTES CONSIGNES DE

SÉCURITÉ

Vous devez toujours respecter les précautions de sécurité de base

concernant l'installation et l'utilisation de cet équipement électrique

qui comprennent :

VEUILLEZ LIRE ET RESPECTER

TOUTES CES INSTRUCTIONS

ATTENTION - Pour réduire les risques de blessure, ne jamais

autoriser les enfants à utiliser ce produit sans surveillance.

ATTENTION - RISQUE D’ÉLECTROCUTION- Ne branchez que sur

une prise de terre protégée par un disjoncteur de fuite de terre

(GFCI). Adressez-vous à un électricien qualifié si vous ne pouvez pas

vérifier que la prise est protégée par un GFCI.

MISE EN GARDE - Pour limiter le risque de choc électrique, la

piscine ne doit pas être installée à moins de 1,8 m (6 pieds) de toute

prise électrique. Ne placez pas d'appareils portables à moins de 1,5 m

(5 pieds) de la piscine.

NE PAS ENTERRER LE CORDON. Placer le cordon de manière à

minimiser les risques encourus par le passage de tondeuses,

tronçonneuses et autres équipements.

ATTENTION - Pour réduire les risques d’électrocution, remplacer

immédiatement tout cordon endommagé.

Si le câble d'alimentation est endommagé, il doit être remplacé par le

fabricant, son service après vente ou des personnes de qualification

similaire afin d'eviter un danger.

ATTENTION - Pour réduire les risques d’électrocution, ne pas utiliser

de rallonge pour relier l’unité à la prise électrique ; utiliser une prise

bien située.

MISE EN GARDE : Ce filtre à sable doit être utilisé uniquement dans

des piscines démontables. Il ne doit pas être utilisé dans des piscines

fixes. Une piscine démontable est conçue pour pouvoir être facilement

démontée pour son stockage et remontée dans son intégrité d’origine.

Une piscine fixe est construite sur ou dans le sol ou dans un bâtiment et

elle ne peut pas être facilement démontée pour le stockage.

ATTENTION - Cet appareil n'est pas conçu pour être utilisé par des

personnes à capacités physiques, sensorielles ou intellectuelles

réduites ou sans expérience et connaissances, s'ils sont sous

surveillance ou bien s'ils ont été informés quant à l'utilisation de

l'appareil par une personne responsible de leur sécurité. Surveiller les

enfants pour s'assurer qu'ils ne jouent pas avec l'appareil.

Les installations électriques doivent respecter les règles nationales de

câblage, consultez un électricien qualifié si vous avez des questions.

La pompe doit être munie d'un transformateur de séparation ou d'un

dispositif à courant résiduel (RCD) qui répond avec une intensité de

courant ne dépassant pas 30 mA.

Contrôlez et vérifiez SVP que tous les composants du filtre à sable

sont présents avant l’utilisation. Informez Bestway à l’adresse du

service clientèle répertoriée dans ce manuel en cas de dommage ou

de pièces manquantes au moment de l'achat.

• MOTEUR PROTÉGÉ THERMIQUEMENT. BOÎTIER CSA 3

• À N’UTILISER QU’AVEC LES PISCINES.

• MISE EN GARDE : POUR GARANTIR UNE PROTECTION

CONSTANTE CONTRE LE RISQUE D’ÉLECTROCUTION,

N’UTILISEZ QUE DES PIÈCES DE RECHANGE IDENTIQUES

DURANT L’ENTRETIEN.

• ATTENTION : RISQUE D’ÉLECTROCUTION. NE BRANCHEZ QUE

SUR UNE PRISE DE TERRE PROTÉGÉE PAR UN DISJONCTEUR

DE FUITE DE TERRE (GFCI).

• MISE EN GARDE : CETTE POMPE NE DOIT ÊTRE UTILISÉE

QU’AVEC LES PISCINES DÉMONTABLES - NE L’UTILISEZ PAS

AVEC DES PISCINESINSTALLÉES DE MANIÈRE PERMANENTE.

• MISE EN GARDE : NE BRANCHEZ QUE SUR UNE PRISE

DETERRE PROTÉGÉE PAR UN DISJONCTEUR DE FUITE DE

TERRE DE CLASSE A.

• MISE EN GARDE : POUR GARANTIR UNE

PROTECTIONCONSTANTE CONTRE LES ÉVENTUELLES

ÉLECTROCUTIONS, CETTE UNITÉ DOIT ÊTRE MONTÉE AU

NIVEAU DE LA BASE CONFORMÉMENT À LA

NOTICE D'INSTALLATION.

CONSERVEZ CES INSTRUCTIONS

FILTRE À SABLE

MANUEL D’UTILISATION

Visitez la chaîne

YouTube de Bestway

CONSIGNES DE SÉCURITÉ

’

NOUS SUGGÉRONS DE NE PAS

RAMENER LE PRODUIT AU MAGASIN

DES QUESTIONS ? DES PROBLÈMES ?

DES PIÈCES MANQUANTES ?

Pour les FAQ, les notices, les vidéos ou

les pièces détachées, veuillez visiter

bestwaycorp.com/support