SportsArt A977 Le manuel du propriétaire
- Catégorie
- Fitness, gymnastique
- Taper
- Le manuel du propriétaire
A977 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS .................................................................. 3
3. LIST OF PARTS ................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................. 6
STEP 1 Install the Seat Frame ............................................................... 6
STEP 2 Install the Seat Back Support ................................................... 7
STEP 3 Install the Seat Back Frame ......................................................... 8
STEP 4 Install the Seat Cushion ........................................................... 9
STEP 5 Install the Arm Assemblies ....................................................... 10
STEP 6 Install the Weight Plate Pegs ................................................... 11
STEP 7 Level and Secure the Unit ....................................................... 12
5. OPERATE THE PRODUCT ............................................................... 13
OPERATION Safety Operating Area ..................................................... 13
OPERATION Operate the Product ........................................................ 14
6. MAINTENANCE ................................................................................ 15
MAINTENANCE Safety Precautions ................................................... 15
MAINTENANCE Schedule .................................................................... 16
MAINTENANCE Task List .................................................................... 17
MAINTENANCE One-Year Maintenance Log ....................................... 18
7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 19
8. APPENDIXES ................................................................................... 20
APPENDIXES Exploded Diagram ........................................................ 20
2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the A977
Incline Chest Press machine. Constructed of high quality materials and designed for
years of reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.
3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain precau-
tions apply during the use of this product. Please note the following safety
precautions:
• Please read the entire manual before assembly and operation. Make sure the
product is installed and operated as instructed in this manual.
• Assemble and operate the product on a solid, level surface. Do not use outdoors
or near water, including pools and saunas.
• Check the product before every use. Make sure all parts are assembled, and all
fasteners are tightened. Do not use the product if it is disassembled in any way.
• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes
with leather soles or high heels. Tie all long hair back. Do not go barefoot on this
product.
• Keep away from moving parts. Moving parts may or may not stop immediately if
an object becomes caught or impedes normal motion.
• Use this product only for its intended purpose as described in this manual.
• Be careful when mounting and dismounting the unit.
• Never operate this product if it has been damaged in any way. If it is not work-
ing properly, or has been dropped or damaged, contact a service technician for
repairs.
• Do not use accessories or parts that are not specifically recommended by the
manufacturer (SportsArt) . Such parts might cause injuries or cause the unit to
fail and void the warranty. We will not be responsible for any safety issue that
arises due to the misuse of accessories or parts. At the same time, we will termi-
nate the warranty terms of this equipment.
• This product is not intended for use by persons (including children 12 or younger)
with reduced physical, sensory, or mental capabilities, or by people who are
otherwise deficient in product knowledge or experience. If such people use this
product, they should be given training and be supervised at all times by some-
one responsible for their safety.
• Children 12 or younger should be supervised to ensure that they do not play on
or near the product.
• The user weight limit for this product is 227 kg, 500 lb.
• Maintenance and repair must be performed by trained service personnel
only.
• Warning that any of the adjustment devices that could interfere with the
user’s movement should not be left projecting.
• Over exercise may result in serious injury or death.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-
OUT and consult your physician immediately. Work within your recommended ex-
ercise level. DO NOT work to exhaustion. Before beginning any exercise program,
you should consult with your doctor. It is recommended that you undergo a complete
physical examination.
4
3. LIST OF PARTS
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Main frame 1 A6 99 oval connecting plate 2
A2 Seat back frame 1 A7 Right arm assembly 1
A3 Seat frame 1 A8 Left arm assembly 1
A4 Seat cushion 1 A9 Seat back support 1
A5 118 oval connecting plate 1 A10 Weight plate peg 6
5
Components on the Product
No. Name Specication Notes
20
Washer D16*d10.2*t1.0
Hex nylon nut M10
21
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
Flat waher D22*d8.2*t2.0
22
Inner hex screw M10*P1.5*L20
Spring washer M10
Flat waher D26*d10.3*t3.0
Bushing
Axle ØD25*L104
23
Mushroom top inner hex screw M6*P1.0*L15
Handrail washer D20*d7*t2.0
Spring washer M6
24
Beveled head inner hex screw M8*P1.25*L20
Nyloc hex lock nut M8
25
Mushroom top inner hex screw M8*P1.25*L25
Spring washer M8
Flat waher D22*d8.2*t2.0
26
Washer D16*d10.2*t1.0
Nyloc hex lock nut M10
27
Beveled head inner hex screw M6*L10
Spring washer M6
Handrail washer D20*d7*t2.0
Components in the Hardware Kit
No. Name Qty. Specication Notes
10 Floor xing bracket 1
L-shaped Allen wrench 1 M4
L-shaped Allen wrench 1 M5
L-shaped Allen wrench 2 M6
L-shaped Allen wrench 1 M8
Double open-end wrench 2 13*17
Open-end wrench 1 35
6
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” is
used where screws, washers, and other hardware may be involved.
STEP 1 Install the Seat Frame
(a) First, remove the connecting plate (A6) from the main frame (A1).
(b) Attach the seat frame (A3) to the front of the main frame (A1), then secure
the assembly with connecting plate (A6) and screws (20).
(b)
(a)
7
STEP 2 Install the Seat Back Support
(a) First, remove screws (25) from the seat back support (A9).
(b) Attach the seat back support (A9) onto the seat back frame (A2), then
secure the assembly with screws (25).
(b)
(a)
8
STEP 3 Install the Seat Back Frame
(a) First, remove the connecting plates (A5) and (A6) from the main fram (A1)
and the seat frame (A3).
(b) Then, position the seat back frame (A2) to the main frame (A1) and the
seat frame (A3) where the screw holes align. Secure the assembly with
connecting plates (A5)(A6) and screws (20)(26).
(a)
(b)
(b)
9
STEP 4 Install the Seat Cushion
Please follow instructions (a) through (c) to install the seat cushion.
(a) First remove screws (21) from the seat cushion assembly (A4), and
also remove screws (24) from the seat frame (A3).
(b) Place the seat cushion plate onto the seat frame (A3), and secure the
assembly with screws (24).
(c) Lastly, attach the seat cushion (A4) onto seat cushion plate and use
screws (21) to secure the assembly.
(c)
(b)
(a)
10
STEP 5 Install the Arm Assemblies
Please follow instructions (a) through (b) to install the arm assembly.
(a) First, remove screws (22) from the main frame (A1).
(b) Attach the right arm assembly (A7) onto the main frame (A1), secure the
assembly with screws (22). Follow the same procedure for the left arm
assembly (A8).
(b)
(a)
11
STEP 6 Install the Weight Plate Pegs
Please follow instructions (a) through (c) to install weight plate pegs.
(a) First remove screws (23) from the weight plate pegs (A10).
(b) Then loosen screws (27) from both arm assemblies. Install weight plate
pegs (A10) onto both arm assemblies (A7)(A8) and the sides of the main
frame (A1). Use screws (27) to secure the weight plate pegs from the
back. Finally, secure the whole assembly with screws.
(a)
(b)
12
(a)
(b)
(c)
STEP 7 Level and Secure the Unit
Follow instructions (a) through (c) to level and secure the unit.
(a) Lossen the level adjustment knob and rotate downward until it touches
the floor.
(b) Determine the level adjustment knob position and then tighten up the nut
to secure the position.
(c) Secure the floor fixing bracket (10) to the floor with the floor fixing
bolt, nut and washer as shown to make sure the machine is firmly fixed
to the floor when operating. (Level the machine before securing the floor
fixing bolt.)
(Note: The screw hole of floor fixing bracket is Ø9mm, please make
sure using the suitable floor fixing bolt and drilling the proper hole on
the floor.)
13
5. OPERATE THE PRODUCT
This section includes operational instructions.
OPERATION Safety Operating Area
(a) Safety clearance required as below shown. Do not allow people to be
near this area when operating.
(b) Noise emission under load is higher than without load.
(c) Over exercise or improper workout position may result in serious injury.
(d) This product is intended for exercise arms.
14
OPERATION Operate the Product
(a) Select the appropriate weight plates placed on both sides of the weight
plate pegs, and then secure the weight plates with safety clamps.
(b) Adjust the seat height and back support to the most comfortable position.
(c) Select the horizontal grip or vertical grip.
(d) Perform the exercise in a controlled manner. Exhale when pushing foward
against resistance. Extend both arms and inhale when returning to original
position.
*Note: While operating the machine, if the weight plate is moving around.
Please stop immediately, re-position the weight plate before continue.
* Weight limit: weight plate limit of 200Kg (unilateral 100Kg)
* Please excercise within the range of your skill and training.
* Operate this machine must be supervised under coaches instructions in
order for safety.
(c)
(a)
(b)
15
6. MAINTENANCE
This section covers maintenance topics and includes a maintenance sched-
ule, task list, and log.
MAINTENANCE Safety Precautions
● Please follow standard safety precautions when servicing on this product.
● Must be performed by trained service personnel only.
● Do NOT use a damp towel to clean the product and do perform the fol-
lowing maintenances.
● Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage electronic components and void the warranty.
● Use a clean, lint-free towel, dampened with a mixture of Simple Green®
all-purpose cleaner, to thoroughly clean the handlebar and the console.
● This product has moving parts that can be hazardous. Exercise caution
when maintaining, operating, or moving this product.
● Do not use accessories or parts that are not specically recommended
by the manufacturer (SportsArt) . Such parts might cause injuries or cause
the unit to fail and void the warranty. We will not be responsible for any
safety issue that arises due to the misuse of accessories or parts. At the
same time, we will terminate the warranty terms of this equipment.
● Maintenance and repair must be performed by trained service personnel
only.
16
MAINTENANCE Schedule
Area Day Week Month Quarter Year Notes
1 Exterior ● Clean.
2 Screws ●
Inspect for looseness
and secure if necessary.
3 Cushions ● Wipe with a damp cloth.
4 Seat tube ●
Clean and lubricate once
every six months.
17
MAINTENANCE Task List
Like cars, fitness products require maintenance. Regular maintenance ex-
tends product life, and failure to maintain products can void the manufac-
turer’s warranty. Copy the maintenance log sheet, and record maintenance
work for each fitness product.
Daily tasks
1. Use a clean, lint-free towel to wipe down the product exterior.
2. Inspect all screws. Secure if necessary.
3. Wipe cushions clean with a damp cloth.
Quarterly tasks
1. Clean and lubricate seat tube once every six months.
Caution
● Please follow standard safety precautions when working on this product.
● Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage components and void the warranty.
18
Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28
Completed
Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52
Completed
Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28
Completed
Weekly Tasks Weeks 29-35 Weeks 35-42 Weeks 43-49 Weeks 50-52
Completed
Monthly tasks 1 2 3 4 5 6 7 8 9 10 11 12
Completed
Quarterly Tasks Quarter 1 Quarter 2 Quarter 3 Quarter 4
Completed
Yearly Tasks Year 1
Completed
Notes: __________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
MAINTENANCE One-Year Maintenance Log
Facility:_______________________ Supervisor:____________________
Product model number:__________ Serial number:_________________
Start date: ____________________ End date:_____________________
19
7. CONSIGNES DE SÉCURITÉ IMPORTANTES
Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale. Cepen-
dant certaines précautions s’appliquent chaque fois que vous utilisez votre produit.
• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi noter
les consignes de sécurité suivantes:
• Veuillez lire attentivement les instructions et installer le produit selon les instructions.
• Assemblez et faites fonctionner le produit sur une surface solide et plane; NE PAS
l’utiliser à l’extérieur ou près de l’eau.
• En aucun cas, ne laissez des enfants à proximité ou sur le produit.
• Vériez le tapis de course avant chaque utilisation. Assurez-vous que toutes les
pièces sont assemblées et que tous les éléments de xation sont serrés. NE PAS
utiliser le produit si l’appareil est démonté de quelque façon.
• Gardez vos mains loin des pièces mobiles.
• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de vêtements
amples. NE PORTEZ PAS de chaussures à semelles en cuir ou à talons hauts. At-
tachez les cheveux longs.
• Soyez prudent lors du montage et démontage de l’appareil.
• NE PAS utiliser d’accessoire non spéciquement recommandé par le fabricant. Car
cela pourraient provoquer des blessures ou entraîner une panne de l’appareil.
• Débranchez l’appareil de la prise avant l’entretien ou la suppression de toute pièce.
• Une surveillance étroite est nécessaire quand de produit est utilisé par ou à prox-
imité d’enfants, de malades ou de personnes handicapées.
• Utilisez ce product uniquement pour l’usage prévu dans ce manuel.
• La limite de poids de l’utilisateur pour le produit est de 227 kg, 500 lb.
• Ce produit n’est pas destiné à être utilisé par des personnes (y compris des enfants)
dont les capacités physiques, sensorielles ou mentales sont réduites ou qui ne dispo-
sent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci ont au préalable
été formées eu égard à l’utilisation de produit par une personne responsable de leur
sécurité.
• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le produit.
• Ce produit n’est pas destiné à être utilisé par des personnes (y compris des enfants)
dont les capacités physiques, sensorielles ou mentales sont réduites ou qui ne dispo-
sent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci ont au préalable
été formées eu égard à l’utilisation de ce produit par une personne responsable de leur
sécurité.
• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le produit.
ATTENTION
Si vous ressentez une douleur ou si vous avez une sensation anormale, ARRÊTEZ
VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin. Entraînez-vous
à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à l’épuisement.
• Avant de commencer un programme d’exercice, vous devriez consulter votre méde-
cin. Il est recommandé de faire un examen physique complet.
Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces et
au produit. Comme tels, les mots “gauche” et “droit” font respectivement référence aux
côtés gauche et droit de l’exerciseur. De même pour plus de concision, le mot «vis» est
utilisé dans certains cas où des rondelles, des vis et autres matériels sont associés.
20
8. APPENDIXES
APPENDIXES Exploded Diagram
Note: We reserve the right to revise the following diagrams at any time
without notice or obligation to notify any person of such revisions or changes.
Please visit our official website www.gosportsart.com for the latest version.
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
SportsArt A977 Le manuel du propriétaire
- Catégorie
- Fitness, gymnastique
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: SportsArt A977 Owner's manual
Documents connexes
-
SportsArt A985 Le manuel du propriétaire
-
-
-
-
-
-
-
-
-