2
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no
longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on
the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
The device can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference
to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately
shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For
personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine
if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you
are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the FCC.
Nevertheless, it is advised to use the Device in such a manner that minimizes the potential for human contact during normal
operations.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on
the back of Device, into the FCC ID Search form available at transition. fcc.gov/oet/ea/fccid. It is advised to use the wireless
equipment in such a manner that the potential for human contact during normal operation is minimized.
This device should be installed and operated with at least 20 cm between the radiator and your body.
Product Specifications
Model Number: H6Y2A5
Electrical Rating: 18VDC, 1.67A
Temperature Rating: 32°F to 95°F (0°C to 35°C)
Connectivity: Dual Band Wi-Fi (2.4/5GHz) 802.11 a/b/g/n/ac, Bluetooth, Bluetooth LE