Winmate M101Q8-LABM Manuel utilisateur

Marque: Winmate

Modèle: M101Q8-LABM

Catégorie: Comprimés

Taper: Manuel utilisateur

Ce manuel convient également à

Please read these instructions carefully before using this product, and save this manual for future use.

M101Q8 Series

Rugged Android Tablet

Qualcomm® SDA 660 Kryo 260 CPU, octa-core, up to 2.2 GHz

Android 9.0

User Guide

Version 1.0

Document Part No. 915211101069

2 M101Q8 Rugged Android Tablet User Guide

Contents

PREFACE .............................................................................................................................................................................. 4

ADVISORY CONVENTIONS .............................................................................................................................................................. 4

SAFETY INFORMATION ................................................................................................................................................................... 5

HANDLING AND MAINTENANCE ...................................................................................................................................................... 7

DECLARATION OF CONFORMITY (DOC) ............................................................................................................................................. 8

ABOUT THIS USER GUIDE .............................................................................................................................................................. 9

CHAPTER 1: GETTING STARTED .......................................................................................................................................... 10

1.1 UNPACKING ........................................................................................................................................................................ 11

1.2 DESCRIPTION OF PARTS ......................................................................................................................................................... 12

1.3 FIRST-TIME OPERATION ......................................................................................................................................................... 13

1.3.1 Installing SIM-Card (For WWAN Equipped Devices) ................................................................................................ 14

1.3.2 Inserting MicroSD Card ............................................................................................................................................ 15

1.3.3 Inserting Battery Pack ............................................................................................................................................. 15

1.3.4 Connecting to Power Supply .................................................................................................................................... 16

1.4 TURNING ON AND OFF THE DEVICE .......................................................................................................................................... 16

1.4.1 Turning On ............................................................................................................................................................... 16

1.4.2 Turning Off .............................................................................................................................................................. 17

1.5 RESETTING TO FACTORY DEFAULTS .......................................................................................................................................... 17

CHAPTER 2: USING THE TABLET ......................................................................................................................................... 19

2.1 USING THE TOUCH SCREEN..................................................................................................................................................... 20

2.2 WAKING UP THE TABLET........................................................................................................................................................ 20

2.3 USING THE HOME SCREEN ..................................................................................................................................................... 21

2.3.1 Personalizing Home Screen ..................................................................................................................................... 21

2.3.2 Viewing other parts of the Home Screen ................................................................................................................. 23

2.4 STATUS AND NOTIFICATION ICONS ........................................................................................................................................... 24

2.4.1 Notification Icons ..................................................................................................................................................... 24

2.4.2 Status Icons.............................................................................................................................................................. 24

2.5 USING THE ON-SCREEN KEYBOARD .......................................................................................................................................... 25

2.5.1 Entering Text ........................................................................................................................................................... 25

2.5.2 Editing Text .............................................................................................................................................................. 26

2.6 DISPLAY SETTINGS ................................................................................................................................................................ 27

2.7 AUDIO PROFILE SETTINGS ...................................................................................................................................................... 28

2.7.1 Sound Settings ......................................................................................................................................................... 28

2.7.2 Adjusting Volume .................................................................................................................................................... 29

2.8 LANGUAGE AND KEYBOARD SETTINGS ...................................................................................................................................... 29

2.9 CHANGING TOUCHSCREEN MODES .......................................................................................................................................... 30

2.10 ABOUT PHONE ................................................................................................................................................................... 31

CHAPTER 3: WINMATE HOME MANAGER .......................................................................................................................... 32

3.1 HOW TO LOCK APPLICATIONS ................................................................................................................................................. 33

3.2 HOW TO UNLOCK APPLICATIONS ............................................................................................................................................. 35

3.3 HOW TO CHANGE PASSWORD ................................................................................................................................................. 37

CHAPTER 4: NETWORKS AND WIRELESS DEVICES .............................................................................................................. 38

4.1 CONNECTING TO MOBILE NETWORKS ....................................................................................................................................... 39

4.1.1 Checking the Network Connection .......................................................................................................................... 39

4.1.2 Turning on Data Service........................................................................................................................................... 39

4.2 CONNECTING TO WI-FI NETWORKS ......................................................................................................................................... 39

4.2.1 Turning on Wi-Fi and Connecting to Wi-Fi Networks .............................................................................................. 39

4.2.2 Adding Wi-Fi Network ............................................................................................................................................. 40

4.3 CONNECTING TO BLUETOOTH DEVICES ..................................................................................................................................... 41

4.3.1 Turning Bluetooth On or Off .................................................................................................................................... 41

4.3.2 Connecting to Bluetooth Device .............................................................................................................................. 41

4.3.3 Disconnecting Bluetooth Device .............................................................................................................................. 41

3 Preface

4.4 CONNECTING TO COMPUTER VIA USB ...................................................................................................................................... 41

4.4.1 USB Computer Connection ...................................................................................................................................... 42

4.4.2 USB Debugging Settings .......................................................................................................................................... 43

CHAPTER 5: USING CAMERA .............................................................................................................................................. 45

5.1 CAPTURING PHOTOS OR VIDEO ............................................................................................................................................... 46

5.1.1 Opening Camera .......................................................................................................... Error! Bookmark not defined.

5.1.2 Taking Pictures ........................................................................................................................................................ 46

5.1.3 Viewing pictures ...................................................................................................................................................... 46

5.1.4 Shooting Videos ....................................................................................................................................................... 47

5.2 THE GALLERY ....................................................................................................................................................................... 47

CHAPTER 6: USING BARCODE READER ............................................................................................................................... 48

6.1 USING BARCODE READER ....................................................................................................................................................... 49

6.1.1 Barcode Reader Location ......................................................................................................................................... 49

6.1.2 Android Winmate® Data Collection (WDC) ............................................................................................................. 49

6.1.3 Where to Find WDC ................................................................................................................................................. 49

6.1.4 How to Turn On/Off the Power of Barcode Reader ................................................................................................. 50

6.1.5 How to Change the Symbologies of Barcode ........................................................................................................... 51

6.1.6 How to Add Command to the Barcode Output ........................................................................................................ 51

6.1.7 How to Change the Scan Type of the Barcode Reader ............................................................................................ 52

6.1.8 How to Change WDC Settings or Reset to Default .................................................................................................. 52

6.1.9 Scanning a Barcode ................................................................................................................................................. 53

6.1.10 Scanning Tips and Considerations ......................................................................................................................... 53

6.2 DOCKING CONNECTOR PIN DEFINITION .................................................................................................................................... 54

6.3 EXPANSION PORT PIN DEFINITION ........................................................................................................................................... 54

APPENDIX .......................................................................................................................................................................... 55

APPENDIX A: BASIC TROUBLESHOOTING ......................................................................................................................................... 56

APPENDIX B: SOFTWARE DEVELOPMENT KIT ................................................................................................................................... 57

APPENDIX C: PRODUCT SPECIFICATIONS ......................................................................................................................................... 58

APPENDIX D: ORDER INFORMATION .............................................................................................................................................. 59

APPENDIX E: OS IMAGE UPDATE .................................................................................................................................................. 59

APPENDIX F: OTA UPDATE GUIDE ................................................................................................................................................ 60

4 M101Q8 Rugged Android Tablet User Guide

Preface

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to alert you

to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and

Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

Attention Unealerted’attention indique un dommage possible à l’équipement et explique

comment éviter le problèm e potentiel.

Warning! An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

Avertissement !Un Avertissement de Choc Electrique indique le potentiel de chocs sur

des emplacements électriques et comment é vitres problèmes.

5 Preface

Safety Information

Precaution on Battery Pack

Précaution avec le bloc-pile

Do Not Disassemble, Modify, or Insert Sharp

Objects Into the Battery Pack. Electrolyte

leakage, generation of heat, ignition or rupture

may result.

[FR] Ne pas démonter, modifier, ou insérer

des objets pointus à l'intérieur du bloc-pile.

Une fuite d'électrolyte, la génération de

chaleur, l'amorçage ou la rupture peuvent être

occasionnés.

Do Not Short the Positive (+) and Negative (-)

Terminals of the Battery. Generation of heat,

ignition or rupture may result. When carrying

or storing the device, do not place the battery

pack together with articles that may contact

electricity.

[FR] Ne pas court-circuiter les bornes Positive

(+) et Négative (-) de la pile, la génération de

chaleur, l'amorçage ou la rupture peuvent être

occasionnés. Lors du transport et du

rangement de l'appareil, ne pas placer le bloc-

pile en même temps que des articles pouvant

créer un contact électrique.

Do Not Apply Shocks to the Battery by

Dropping It or Applying Strong Pressure to It.

Electrolyte leakage, generation of heat, ignition

or rupture of battery may occurs.

[FR] Ne pas faire subir de choc à la pile en la

laissant tomber ou en appliquant une forte

pression dessus. Une fuite d'électrolyte, la

génération de chaleur, l'amorçage ou la

rupture peuvent être occasionnés.

Do Not Charge the Battery Other Than

Methods Those Specified In This Manual. If

the battery is not charged using one of the

specified methods, electrolyte leakage,

generation of heat, ignition or rupture may

result.

[FR] Ne pas charger la pile par d'autres

méthodes que celles spécifiées dans ce

manuel. Si la pile n'est pas chargée en utilisant

l'une des méthodes spécifiées, une fuite

d'électrolyte, la génération de chaleur,

l'amorçage ou la rupture peuvent être

occasionnés.

When the Battery Pack Has Deteriorated,

Replace It with a New Battery. Continued use

of a damaged battery pack may result in heat

generation, ignition or battery rupture.

[FR] Lorsque la pile est détériorée, la

remplacer par une nouvelle pile. L'utilisation

continue d'une pile endommagée peut

occasionner une génération de chaleur,

l'amorçage ou la rupture de la pile.

Do Not Expose the Battery Pack to Excessive

Heat, or Extreme Heat (Near Fire, in Direct

Sunlight for example) Generation of heat,

ignition or rupture may result

[FR] Ne pas exposer le bloc-pile à une Chaleur

Excessive, ou une Chaleur Extrême (Près d'un

feu, sous la lumière du soleil par exemple)Une

production de chaleur, l'amorçage ou la

rupture peuvent être occasionnés

Do Not Use the Battery Pack With Any Other

Products. The battery pack is rechargeable

and is only designed for this specific product. If

it is used with a product other than the

specified product, electrolyte leakage,

generation of heat, ignition or rupture may

result.

[FR] Ne pas utiliser avec un autre produit La

batterie est rechargeable et a été conçue pour

un produit spécifique. Si elle est utilisée sur un

produit différent

de celui pour lequel elle a été conçue, des

pertes d’électrolytes et une production de

chaleur sont possibles, elle risque également

de prendre feu ou de casser.

Do Not Use This Product With Battery Other

Than the One Specified.

[FR] Ne pas utiliser ce produit avec une

batterie autre que celle spécifiée

Discontinue using device immediately if you

notice the battery is swelling, or looks puffy or

misshapen. Do not attempt to charge or use

the device. Do not handle a damaged or

leaking battery. Do not let leaking battery fluid

come into contact with your eyes, skin or

clothing.

[FR] Si vous remarquez une pile gonflée,

élargie ou anormale, cesser l’utilisation de

l’appareil immédiatement. N’essayez pas de

recharger l’appareil ou de l’utiliser. Ne pas

manipuler une pile qui fuit ou qui est

endommagée. Ne laissez pas de liquide qui

fuit entrer en contact avec vos yeux, votre

peau ou vos vêtements.

M101Q8 Rugged Android Tablet User Guide

General Product Safety

Sécurité générale des

produits



Do not block any ventilation openings. Do not

place the product against a wall or in an

enclosed space as doing so might impede the

flow of cooling air.

 [FR] Ne pas bloquer les ouvertures de

ventilation. Ne pas placer le produit contre un

mur ou dans un espace clos de façon à

entraver la circulation de l'air de

refroidissement.

 Do not place the product near any heat

sources such as radiators, warm air intakes,

stoves or other heat-generating devices

(including amplifiers or other heat producing

equipment).

 [FR] Ne pas placer le produit près d'une

source de chaleur comme des radiateurs, les

arrivées d'air chaud, poêles ou autres produits

générant de la chaleur (y compris les

amplificateurs ou autre équipement produisant

de la chaleur.)

 Protect the power cord from being crushed or

pinched, particularly in the area of the plugs,

any receptacles used, and the point of exit

from the apparatus. Do not break off the

ground pin of the power cord.

 [FR] Empêcher le cordon d'alimentation d'être

écrasé ou pincé, en particulier dans les zones

de prises, des containers utilisés, et du point

de sortie de l'appareil. Ne pas casser la broche

de terre du cordon d'alimentation.



Do not disregard the safety that a polarized or

grounded connection can provide. A polarized

connection consists of two plugs, one of which

is larger than the other. A grounded connection

has two blades and a third one that is

grounded. If the main plug provided cannot be

inserted into your outlet, consult an electrician

to replace your obsolete outlet.

 [FR] Ne pas ignorer la sécurité qu'une prise

polarisée ou une prise de terre peut prévoir.

Une prise polarisée se compose de deux

fiches, dont l'une est plus large que l'autre.

Une prise de terre possède deux lames et une

troisième qui est la terre. Si la fiche principale

fournie ne peut être insérée dans votre prise,

consultez un électricien pour remplacer votre

prise obsolète.

 Use only accessories specified by the

manufacturer.

[FR] Utiliser uniquement les accessoires

spécifiés par le fabricant.

 This product should not be used near water

such as bathtubs, sinks, swimming pools, wet

basement, etc.

[FR] Ce produit ne dois pas être utilisé près de

l'eau comme les baignoires, les éviers, les

piscines, les sous-sols humides, etc.

 Use only with its transport carriage, stand,

tripod, console or table specified by the

manufacturer or sold with the product. When

using a carriage, move the carriage assembly

with the product carefully to avoid damage

from falling over.

 [FR] Utiliser uniquement avec son chariot de

transport, support, trépied, console ou table

spécifiés par le fabricant ou vendu avec le

produit. Lors de l'utilisation d'un charriot,

déplacez l'ensemble chariot avec le produit

avec soin pour éviter tout dommage de chute.



Unplug this apparatus during lightning storms

or when it is not being used for long periods.

 [FR] Débrancher cet appareil durant les orages

ou lorsqu'il n'est pas utilisé pendant de

longues périodes.



Refer all servicing to qualified service

personnel. A technical intervention is required

when the apparatus has been damaged in any

way, for example if the power cord or plug is

damaged, liquid has been spilled or objects

have fallen inside the unit, if the product has

been exposed to rain or moisture, if it does not

operate normally or if it has been dropped.

 [FR] Confier toute réparation à du personnel

qualifié. Une intervention technique est

nécessaire lorsque l'appareil a été

endommagé de quelque façon, par exemple si

le cordon d'alimentation ou la fiche est

endommagé, du liquide a été renversé ou des

objets sont tombés à l'intérieur de l'unité, si le

produit a été exposé à la pluie ou à l'humidité,

s'il ne fonctionne pas normalement ou s'il a été

jeté.

General Guideline

Directive générale

It is recommended to reboot the device when

some functions are defect or inactive. If it still

can't solve the problems please contact your

dealer or agent.

Il est recommandé de redémarrer l'appareil

lorsque certaines fonctions sont défectueuses

ou inactives. Si le problème persiste, veuillez

contacter votre revendeur ou votre agent.

Preface

Handling and Maintenance

General Guideline

Guide Général

Keep the product at least 13 cm (5 inches)

away from electrical appliances that can

generate a strong magnetic field such as TV,

refrigerator, motor, or a large audio speaker.

[FR] Garder le produit au moins à 13 cm (5

pouces) de distance des appareils électriques

qui peuvent générer un fort champ magnétique

comme une télévision, un réfrigérateur, un

moteur, ou un important haut-parleur.

Do not place heavy objects on top of the tablet

computer as this may damage the display.

[FR] Ne pas placer d'objets lourds sur le

dessus de l'ordinateur tablette cela peut

endommager l'écran.

The screen surface can be easily scratched.

Use with care. Do not use paper towels to

clean the display but use the included cleaning

cloth. Avoid touching it with a pen or pencil.

[FR] La surface de l'écran peut être facilement

rayée. Utiliser avec précaution. Ne pas utiliser

de serviette en papier pour nettoyer l'écran

mais utiliser le chiffon de nettoyage inclus.

Éviter de toucher avec un stylo ou un crayon.

To maximize the life of the backlight in the

display, allow backlight to automatically turn off

as a result of power management. Avoid using

a screen saver or other software that prevents

the power management from working.

[FR] Pour maximiser la durée de vie du

rétroéclairage de l'écran, autoriser le

rétroéclairage résultant de la gestion de

l'alimentation. Éviter d'utiliser un économiseur

d'écran ou un autre logiciel empêchant la

gestion de l'alimentation de fonctionner.

Cleaning Guideline

Guide de nettoyage

Use a soft cloth moistened with water or a non-

alkaline detergent to wipe the exterior of the

product.

[FR] Utiliser un chiffon doux humidifié avec de

l’eau ou un détergeant non alcalin pour

essuyer l'extérieur du produit.

Gently wipe the display with a soft, lint-free

cloth. Do not use alcohol or detergent on the

product.

[FR] Essuyer délicatement l'écran avec un

chiffon doux non pelucheux. Ne pas utiliser

d'alcool ou un détergent sur le produit.

Touchscreen Guideline

Guide de l'écran tactile

Use your finger or the stylus on the display.

Using sharp or metallic object may cause

scratches and damage the display, thereby

causing errors.

[FR]Utiliser votre doigt ou le stylet sur l'écran.

L'utilisation d'un objet pointu ou métallique

peut provoquer des rayures.

Use a soft cloth to remove dirt on the display.

The touchscreen surface has a special

protective coating that prevents dirt from

sticking to it. Not using a soft cloth may cause

damage to the special protective coating on

the touchscreen surface. To clean off hard to

remove dirt, blow some steam on the particular

area and gently wipe away using a soft cloth.

[FR]Utiliser un chiffon doux pour enlever la

poussière sur l'écran. La surface de l'écran

tactile a un revêtement protecteur spécial

empêchant la saleté de se coller à lui. Ne pas

utiliser un chiffon doux peut endommager le

revêtement spécial sur la surface de l'écran

tactile. Pour nettoyer les saletés plus difficiles

à enlever, souffler de la buée sur la zone

particulière et essuyer doucement avec un

chiffon doux.

Do not use excessive force on the display.

Avoid placing objects on top of the display as

this may cause the glass to break.

[FR]Ne pas utiliser une force excessive sur

l'écran. Éviter de placer des objets au dessus

de l’écran cela pourrait provoquer une cassure

du verre.

When there is a noticeable discrepancy in the

operation of the touchscreen function (your

touch does not correlate to the proper location

on the screen), recalibrate the touchscreen

display.

[FR]Lorsqu'il y a un écart sensible dans le

fonctionnement de l'écran tactile (votre contact

ne correspond pas à la bonne position sur

l'écran), recalibrer l'écran tactile.

M101Q8 Rugged Android Tablet User Guide

Declaration of Conformity (DoC)

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a class "B" digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at him own expense.

CE Notice (European Union)

Electromagnetic Compatibility Directive (2014/30/EU)

• EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

• EN55032: 2012/AC:2013

• EN61000-3-2:2014

• EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

•

EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU legislations and harmonized

standards. Product also complies with the Council directions.

Preface

About This User Guide

This User Guide provides information about using the Winmate® M101Q8 and accessories.

Note:

Some pictures in this guide are samples and can differ from actual product.

Documentation Set

The documentation set for the M101Q8 provides information for specific user needs, and includes:

• M101Q8 Series Quick Start Guide - describes how to get the M101Q8 up and running.

• M101Q8 Series User Guide – contains detailed description on how to use the M101Q8, its

components and features.

Chapter Descriptions

Chapter 1, Getting Started provides basic instructions on how to use M101Q8, including main SIM card,

SD card and battery installation, powering on and resetting M101Q8.

Chapter 2, Using the M101Q8 provides basic instructions on using the M101Q8.

Chapter 3, Using Winmate Home Manager explains how to use WHM to lock the launcher.

Chapter 4, Connecting to Network and Devices explains how to connect M101Q8 to networks, Bluetooth

devices, and computer.

Chapter 5, Using Camera provides instructions on how to use camera on M101Q8.

Chapter 6, Capturing Data provides information on how to use Barcode Reader that might be present in

M101Q8.

M101Q8 Rugged Android Tablet User Guide

Chapter 1: Getting Started

This chapter tells you information about Winmate® M101Q8

Series tablet, its highlighted features, and provides basic

instructions for using the

M101Q8 , including powering on and

resetting the

M101Q8 .

0BChapter 1: Getting Started

1.1 Unpacking

Check and identify the standard supplied accessories.

Standard factory shipment list:

• Tablet Computer

• Standard Battery

• Power Adapter

• Power Cord and Plugs

• Capacitive Touch Stylus

• Quick Start Guide

Optional Accessories

Your package may include optional accessories based on your order. You can purchase optional

accessories for M101Q8 from Winmate:

Carry Bag

• With hand carrier and shoulder strap

• Separated pocket for accessories

Hand Strap

• Ergonomic hand-strap can help you

handle the Rugged Tablet much more

easily and comfortably.

Battery Charger

• Dual charging slots.

• LED indicators to show current battery

charging status.

Vehicle Dock

• VESA Mounting support

• 2 x USB 2.0 (2 x Rear,)

• 1 x LAN (10/100)

• 1 x RS232

• 1 x GPS ANT SMA

• 9-36V DC IN with 3-pin terminal block

•

Easy insert and release with Key-Lock

Desk Dock

• 2 x USB 2.0 (2 x Rear)

• 1 x LAN (10/100)

• 1 x VGA

• 1 x RS232

Shoulder Strap

• Fixed with screws

• Adjustable cross-body strap (85-165cm)

with pad

VESA Mount Kit

• Widely used mounting solution

M101Q8 Rugged Android Tablet User Guide

1.2 Description of Parts

Front:

Right:

Item

Description

Front

Camera

2 Megapixel Webcam

LED

Indicators:

Show the current status of

the Tablet Computer Red:

Charging / Hot-swap battery

Green: Full Charge Blue:

Turning on

Touch

Screen

Display and act as one of the

inputs for the Tablet

Computer

Back

Button

Back to previous page

Home

Button

Back to Desktop

Power

Button

Power on/off

I/O Cover Protects I/O ports

Front LED Indicators Details:

Front Button Details:

Item

Description

Micro

SD Card

Reader

Memory card reader

port for Micro SD

Card

USB

Type C

High speed USB port

connects to PC or

USB devices such as

mouse, keyboard, etc.

Note: The USB Type-

C connector follows

USB 3.0 standard and

support Dual Role

port (DRP), which

does not support

Alternate Mode (ALT)

or USB Power

Delivery (USB-PD).

USB 3.0

Host

High speed USB port

connects to PC or

USB devices such as

mouse, keyboard, etc.

Note: This USB port

won’t work when the

tablet is connected to

the optional docking.

Please use the USB

ports on the docking.

Mic

In/Line

Out

Headset or

headphone can be

connected

Power

Jack

DC-IN power input

jack

Side I/O Details:

0BChapter 1: Getting Started

Rear:

Item

Description

NFC

Optional NFC reader for

reading of NFC tags.

Kensington

Lock Port

Provide lock access for

Kensington Lock.

Expansion

Port

Provide optional

connectivity to custom

modules for special

application (USB2.0,

RS232).

Rear

Camera

5MP Autofocus Camera.

Captures photos and

videos.

Optional

Barcode

Barcode Scanner for

reading of 1D / 2D

barcode.

Fn Button Menu.

Volume

Control or

Scan

Buttons

Volume Control

(+) Raise volume,

(-) Lower volume.

Scan Button

Use WDC to change

button definition (+)/(-)

for scanning

Speakers

Emits sounds

3G / LTE

Module

(Optional) /

SIM card

slot

Service window to insert

Micro SIM card. Also

provide access to 3G /

LTE Module.

Bottom:

Item

Description

Battery Lock

Latch

Latch to lock the battery

in place once battery is

inserted. No spring

loaded.

Touch Pen

Slot

Pen holder slot to store

touch pen.

Battery

Release

Slider

Spring-loaded slider

that latches the battery

in.

Docking

Connector

Port to docking

solutions such as

vehicle docking to

provide power and

external antenna.

1.3 First-Time Operation

To get started:

1. Install SIM card (For WWAN equipped devices).

2. Install memory card.

3. Install the battery.

4. Charge your tablet.

5. Start the tablet.

M101Q8 Rugged Android Tablet User Guide

1.3.1 Installing SIM-Card (For WWAN Equipped Devices)

The Tablet Computer supports WWAN data connection and fits a Micro-SIM card.

To install the SIM card:

Tools Needed:

Service Windows

Screw: M2x5, 4 pc

Screwdriver: Philips Type , Size #0 , for

M2 screws, torque: 2.0 ± 0.5 kgf.cm

WWAN Module

Screw: M2x3.5, 1 pc

Screwdriver: Philips Type , Size #0 , for

M2 screws, torque: 2.0 ± 0.5 kgf.cm

❶ Remove four screws and remove the service

window.

❷ Remove the one screw that secures the WWAN

module. Carefully lift the module up. Do not to damage

the connected cables!

❸ Carefully flip and move the WWAN module and to

the right. Do not disconnect cables!

❹ Insert SIM-Card all the way in. Chip/ contact facing

down.

❺ Use your hand to carefully pull the cable outside

the module card. Re-insert the 3G/LTE module and

fasten one screw. Accurately route the cables. Do

not bend cables! Do not pinch/ squeeze the cable!

❻Re-insert the service window and fasten with the four

screws.

Caution When re-inserting WWAN module, please pay attention to cable routing. Make

sure the cable module does not get squeezed.

Attention Lors de la réinsertion du module 3G / LTE, veillez au routage des câbles.

Assurez-vous que le module ne soit pas comprimé.

0BChapter 1: Getting Started

1.3.2 Inserting MicroSD Card

Your tablet supports Micro SDXS card.

To install Micro SDXS card:

1. Open I/O protective cover by pulling out the latch.

2. Insert microSD card into slot with contacts facing down.

3. Press the card in to ensure that it is seated properly.

4. Close I/O protective cover.

To remove Micro SDXS card:

1. Open I/O protective cover by pulling out the latch.

2. Push and release the micro SD card to unlock it.

3. Pull out the micro SD card.

1.3.3 Inserting Battery Pack

Warning!

Discontinue using device immediately if you notice the battery is swelling, or looks

puffy or misshapen. Do not attempt to charge or use the device. Do not handle a

damaged or leaking battery. Do not let leaking battery fluid come into contact with

your eyes, skin or clothing.

Caution

To keep battery health and prevent possible issues from battery over-discharged,

please charge the tablet built-in back-up battery once every two months.

To insert the standard battery pack:

1. Disconnect AC adapter and power cord from the tablet computer.

2. Turn the tablet computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Insert the battery on the connector-pins side first, and then lower the battery into the battery

compartment. Continue to hold the Battery Release Slider before battery is fully inserted.

6. Make sure the battery is completely lowered into the compartment before letting go the Battery

Release Slider. Battery will be flat against the housing once fully inserted.

M101Q8 Rugged Android Tablet User Guide

Removing the Battery Pack

1. Power off the tablet computer (or put it to sleep). Disconnect any cords connected to the

computer.

2. Turn the tablet computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Lift the battery out using the opening on side of battery compartment.

1.3.4 Connecting to Power Supply

The Tablet Computer operates either on external AC power or internal battery power.

It is recommended to use AC power when you start up the Tablet Computer for the first time.

Caution

Use only the AC adapter included with your Tablet Computer. Using other AC adapters

may damage the Tablet Computer and the Battery.

Caution

For users start up the Tablet Computer for the first time with internal battery power,

please make sure the battery is fully charged before using.

Perform the following to connect the Tablet computer to AC Power:

1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch

2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.

3. Plug the AC power cord into the AC adapter.

4. Finally, Plug the AC power cord into the electrical outlet.

When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator on

the tablet computer would show different states. Please refer to description of LED indicator on

Description of Parts.

Standard Battery

Battery Operating Time

8 Hours

Battery Charging Time

2.5 Hours

1.4 Turning On and Off the Device

This section describes how to turn on/ off the device.

1.4.1 Turning On

1. Press and hold the power button for 3 seconds, located on the top side of the unit.

2. When the device vibrates, release the power button. The desktop screen is displayed.

Note:

For power saving purpose, please enable Connect to PC in Accessibility settings.

When connected to PC external 4G, USB and LAN on Docking will be disabled.

0BChapter 1: Getting Started

1.4.2 Turning Off

1. To turn off the device, press and hold the power button

until the phone options menu appears, tap the Power

Off.

2. User can also use the Phone options menu to put the

device into silent or airplane mode, see features table.

1.5 Resetting to Factory Defaults

To reset the device to factory defaults:

1. Slide from the bottom side, then tap Settings .

2. Tap System, user can select to back up application data, Wi-Fi passwords and other settings to

Google servers by tapping Backup My Data.

3. Tap Advanced, then tap Reset options, final tap Erase all data to reset the tablet.

4. Read all the available information and then check Erase storage if user wants to erase all the

data in storage such as music or photo.

M101Q8 Rugged Android Tablet User Guide

19 Chapter 2: Using the Tablet

Chapter 2: Using the Tablet

This chapter explains how to use the buttons, status icons, and

controls of the

M101Q8 Rugged Tablet running on Android 9.0

Operating System and provides instructions on entering and

capturing data.

20 M101Q8 Rugged Android Tablet User Guide

2.1 Using the Touch Screen

The touchscreen supports the core gestures for Android.

Gesture

Action

Description

Tap

To select or activate something

Tap & Hold

Touch and hold an item on the screen by touching it and not

lifting your finger until it respond

Touch, Hold &

Drag

Touch and hold an item for a moment and then without

lifting your finger, move your finger on the screen until you

reach the target position. i.e. moving the apps around the

home screen

Swipe or slide

Quickly move the finger across the surface of the screen.

i.e. slide a lock screen to open the lock

Double-tap

Tap quickly twice on a webpage, screen, or App to zoom

Scale

Place two finger on the screen and pinching them together

2.2 Waking Up the Tablet

If you do not use the tablet for a while, the screen dims and then darkens to conserve the Battery. To wake

up the tablet:

1. Press the Power button on the top side of the tablet.

2. Drag the lock icon upwards to unlock the screen.

La page charge ...

Winmate M101Q8-LABM Manuel utilisateur

Marque: Winmate

Modèle: M101Q8-LABM

Catégorie: Comprimés

Taper: Manuel utilisateur

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: Winmate M101Q8-LABM User manual

Winmate M101Q8-LABM Manuel utilisateur

Ce manuel convient également à

Winmate M101Q8-LABM Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents