Greenworks GPW1703 Mode d'emploi

1700 PSI ELECTRIC PRESSURE WASHER

Read all safety rules and instructions carefully before operating this tool.

IMPORTANT, Retain this manual for future reference!

Owner’s Manual

GPW 1703

TOLL-FREE HELPLINE: 1-888-90WORKS

(888.909.6757)

www.greenworkstools.com

2

Contents .............................................................................................................................. 2

Product specications .......................................................................................................... 2

Safety information ................................................................................................................ 3

Symbols ............................................................................................................................... 6

Electrical .............................................................................................................................. 8

Know your pressure washer ................................................................................................. 9

Packing list ........................................................................................................................ 10

Assembly ............................................................................................................................11

Operation ........................................................................................................................... 15

Maintenance ...................................................................................................................... 21

Troubleshooting ................................................................................................................. 23

Warranty ............................................................................................................................ 24

Exploded View ................................................................................................................... 25

Parts List............................................................................................................................ 26

PRODUCT SPECIFICATIONS

Universal Motor ...................................................................................120V~ 60 Hz, 13 Amps

Max. Pounds Per Square Inch Pressure................................................................ 1700 PSI

Rated Gallons Per Minute ......................................................................................... 1.2 gpm

Maximum Inlet Water Temperature ....................................................................104°F (40°C)

Cleaning Units...........................................................................................................2,040 C.U.

Weight ..................................................................................................19 lbs. (8.62 kg)

CONTENTS

3

SAFETY INFORMATION

WARNING

Read and understand all instructions. Failure to follow all instructions listed below may

result in electric shock, re, and/or serious personal injury.

WARNING

When using this product, basic precautions should always be followed.

READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

• To reduce the risk of injury, close supervision is necessary when a product is used near

children.

• Be thoroughly familiar with controls. Know how to stop the product and release pressure

quickly.

• Stay alert and exercise control. Watch what you are doing and use common sense. Do not

operate the product when you are tired. Do not rush.

• Do not operate the product while under the inuence of drugs, alcohol, or any medication.

• Keep the area of operation clear of all people, particularly small children, and pets.

• Don’t overreach or stand on unstable support. Keep proper footing and balance at all times.

• Follow the maintenance instructions specied in this manual.

WARNING

Risk of injection or injury – Do not direct discharge stream at people or animals.

EXTENSION CORDS

• When using a power tool at a considerable distance from a power source, be sure to use

an extension cord that has the capacity to handle the current the product will draw. An

undersized cord will cause a drop in line voltage, possibly resulting in

overheating, loss

of power, and/or damage to circuit breaker.

Use the chart to determine the minimum

wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s

Laboratories (UL) should be used. When working outdoors with a product, use an extension

cord that is designed for outside use. This type of cord is designated with “WA” or “W” on

the cord’s jacket. Before using any extension cord, inspect it for loose or exposed wires and

cut or worn insulation. It is possible to tie the extension cord and power cord in a knot to

prevent them from becoming disconnected during use. Make a knot, then connect the plug

end of the power cord into the receptacle end of the extension cord. This method can also

be used to tie two extension cords together.

WARNING

To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch

plug with wet hands.

WARNING

Check extension cords before each use. If damaged, replace immediately. Never use the product

with a damaged cord since touching the damaged area could cause electrical shock, resulting in

serious injury.

WARNING

Keep the extension cord clear of the working area. Position the cord so that it will not get caught

on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so

can result in serious personal injury.

4

SAFETY INFORMATION

• Know your product. Read the operator’s manual carefully. Learn the machine’s applications

and limitations, as well as the specic potential hazards related to this product.

• To reduce the risk of injury, keep children and visitors away. All visitors should wear safety

glasses and be kept a safe distance from the work area.

• Use the right product for the job. Don’t force the product or the attachments to do a job it was

not designed for. Don’t use it for a purpose not intended.

• Dress properly. Do not wear loose clothing, gloves, neckties, or jewelry. They can get caught

and draw you into moving parts. Rubber gloves and nonskid footwear are recommended

when working outdoors. Also wear protective hair covering to contain long hair.

• Do not operate the equipment while barefoot or when wearing sandals or similar lightweight

footwear. Wear protective footwear that will protect your feet and improve your footing on

slippery surfaces.

• Exercise caution to avoid slipping or falling.

• Always wear eye protection with side shields marked to comply with ANSI Z87.1. Following

this rule will reduce the risk of serious personal injury.

• Use only recommended accessories. The use of improper accessories may cause risk of

injury.

• Check damaged parts. Before further use of the product, all parts should be carefully checked

to determine that they will operate properly and perform their intended function. Check for

alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any

other conditions that may affect its operation. A guard or other part that is damaged must be

properly repaired or replaced by an authorized service center to avoid risk of personal injury.

• Never leave product running unattended. Turn power off. Do not leave the product until it

comes to a complete stop.

• Keep the motor free of grass, leaves, or grease to reduce the chance of a re hazard.

• Follow manufacturer’s recommendations for safe loading, unloading, transport, and storage of

machine.

• Keep product dry, clean, and free from oil and grease. Always use a clean cloth when

cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents to

clean product.

• Check the work area before each use. Remove all objects such as rocks, broken glass, nails,

wire, or string which can be thrown by the machine.

• Do not use product if switch does not turn it off. Have defective switches replaced by an

authorized service center.

• Avoid dangerous environment. Don’t expose to rain. Keep work area well lit.

• Do not abuse the cord. Never use the cord to carry the product or to disconnect the plug from

an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged

cords immediately. Damaged cords increase the risk of electric shock.

• Never direct a water stream toward people or pets, or any electrical device.

• Before starting any cleaning operation, close doors and windows. Clear the area to be

cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard.

• Do not use acids, alkalines, solvents, flammable material, bleaches, or industrial grade

solutions in this product. These products can cause physical injuries to the operator and

irreversible damage to the machine.

5

SAFETY INFORMATION

WARNING

High pressure jets can be dangerous if subject to misuse.

The jet must not be directed at

people, animals, electrical devices, or the machine itself.

• Keep the motor away from ammables and other hazardous materials.

• Check bolts and nuts xing the pressure washer shell for looseness before each use. A loose

bolt or nut may cause serious motor problems.

• Before storing, allow the motor to cool.

• When servicing use only identical replacement parts. Use of any other parts may create a

hazard or cause product damage.

• ONLY use cold water.

• Make sure minimum clearance of 3 feet is maintained from combustible materials.

• Connect pressure washer only to an individual branch circuit.

• Hold the handle and wand securely with both hands. Expect the trigger handle to move when

the trigger is pulled due to reaction forces. Failure to do so could cause loss of control and

injury to yourself and others.

• Save these instructions. Refer to them frequently and use them to instruct other users. If you

loan someone this product, loan them these instructions also.

WARNING(PROPOSITION 65)

Some dust created by power sanding, sawing, grinding, drilling and other construction activities

contains chemicals known to the state of California to cause cancer, birth defects or other

reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints,

• Crystalline silica from bricks and cement and other masonry products,

• Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies depending on how often you do this type of work. To

reduce your exposure to these chemical: work in a well ventilated area, and work with approved

safety equipment, such as those dust masks that are specially designed to lter out microscopic

particles.

WARNING

This product contains chemical(s) including lead, known to the State of California to cause

cancer, birth defects, and other reproductive harm. Do not drink water from this hose. Wash

hands after use.

SYMBOLS DESIGNATION EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watts Power

no No Load Speed Rational speed, at no load

Alternating Current Type of current

/min Per Minute

Revolutions, strokes, surface speed, orbits, etc.,

per minute

Safety Alert Indicates a potential personal injury hazard.

Read The Operator’s Manual

To reduce the risk of injury, user must read and

understand operator’s manual before using this

product.

Eye Protection

Always wear eye protection with side shields

marked to comply with ANSI Z87.1.

Wet Conditions Alert

Do not expose to rain or use in damp locations.

Risk of Injection

To reduce the risk of injection or injury, never

direct a water system toward people or pets or

place any body part in the stream. Leaking hoses

and ttings are also capable of causing injection

injury. Do not hold hoses or ttings.

Kickback

To reduce the risk of injury from kickback, hold the

spray wand securely with both hands when the

machine is on.

Electric Shock

Failure to use in dry conditions and to observe

safe practices can result in electric shock.

Chemical Burns

To reduce the risk of injury or damage, DO

NOT USE ACIDS, ALKALINES, BLEACHES,

SOLVENTS, FLAMMABLE MATERIAL, OR

INDUSTRIAL GRADE SOLUTIONS in this product.

Risk of Explosion

Do not spray ammable liquids. Flammable liquids,

fuel, and their vapors are explosive and can cause

severe burns or death.

6

SYMBOLS

6

Some of the following symbols may be used on this product. Please study them and learn their

meaning. Proper interpretation of these symbols will allow you to operate the product better and

safer.

7

SYMBOLS

SAVE THESE INSTRUCTIONS

The following signal words and meanings are intended to explain the levels of risk associated

with this product.

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualied

service technician. For service we suggest you return the product to your nearest

AUTHORIZED

SERVICE CENTER

for repair. When servicing, use only identical replacement parts.

WARNING

To avoid serious personal injury, do not attempt to use this product until you have read this Owner’s

Manual thoroughly and understand it completely. If you do not understand the warnings and

instructions in this Owner’s Manual, do not use this product. Call the Toll-free Helpline (1-888-909-

6757) for assistance.

WARNING

The operation of any power tool can result in foreign objects being thrown into your eyes,

which can result in severe eye damage. Before beginning power tool operation, always

wear safety goggles or safety glasses with side shields and, when needed, a full face

shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard

safety glasses with side shields. Always use eye protection which is marked to comply

with ANSI Z87.1.

SYMBOL SIGNAL MEANING

DANGER

Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided,

may result in minor or moderate injury.

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may

result in property damage.

8

ELECTRICAL

ELECTRICAL CONNECTION

This product has a precision-built electric motor. It should be connected to a power supply that

is 120 volts, 60 Hz, AC only (normal household current). Do not operate this product on direct

current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat.

DRIP LOOP

To prevent water from owing along the power cable, and possibly reaching the electrical outlet

and plug, we recommend using a simple drip loop as shown below.

WARNING

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on

lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can

result in serious personal injury.

Fig. 1

Drip Loop

Power cord

9

KNOW YOUR PRESSURE WASHER

The safe use of this product requires an understanding of the information on the tool and in this

operator’s manual as well as a knowledge of the project you are attempting. Before use of this

product, familiarize yourself with all operating features and safety rules.(See Figure 2.)

DETERGENT TANK

Remove the cap from the detergent tank to add detergent to the pressure washer.

GFCI PLUG

The pressure washer power cord is equipped with a GFCI plug to guard against the hazards of

ground fault currents. This plug does not protect against short circuits, overloads, or shocks.

AUTO ON/OFF SWITCH:

This pressure washer is equipped with an Auto Start/Stop feature. To operate: Set power switch

to the On (I) position. Pump will pressurize and shut down immediately. Once the trigger of the

gun is depressed the unit will turn on. Unit will shut off and be in standby mode when trigger is

released.

POWER CORD STORAGE

The power cord can be wrapped and stored around the hook.

TRIGGER AND WAND ASSEMBLY

The Trigger and Wand allows you to operate the pressure washer by depressing the trigger to

activate the pump to spray water using the desired spray tip.

Fig. 2

Nozzle

storage

Handle

ON/OFF Switch

Trigger and

wand assembly

Gun

holder

Detergent

tank

10

PACKING LIST

PART NAME FIGURE PART NO.

Pressure Washer 1

Trigger Assembly 1

Spray Wand 1

Soap tank 1

Handle 1

Green - Narrow fan tip (25° ) 1

White - Wide fan tip (40° ) 1

Spray Tip Cleaning Tool 1

Screw 2

Operator’s Manual 1

Quick Start Guide

Missing parts, accessories or need a service center?

Do Not Return to Store

Call : 1-888-909-6757

www.GreenWorksTools.com

Rev:02

USING DETERGENT

Put pressure washer detergent in detergent tank.

Install blue or black soap nozzle.

Squeeze trigger and wait approx.1 minute for soap.

SPRAY TIPSPRAY TIP APPLICATION

0

O

Red - Stream tip (0° )

The red 0 degree tip provides a straight line of spray. It provides the highest

amount of pressure. It is best used for removing hard, stuck-on grime or dirt.

25

O

Green - Narrow fan tip (25° )

The green pressure washer tip provides high versatility with its 25 degree angle tip.

Referred to as the washing tip, because it provides adequate pressure to remove

dirt from surfaces, but is designed to not damage many surfaces. This pressure

washer tip is designed for “sweeping” foliage or debris given its wide angle. This tip

is versatile due to its wide area of cleaning and strong pressure application.

40

O

White - Wide fan tip (40° )

The white 40 degree tip, referred to as the “fan” tip creates the widest area of

cleaning with relatively low pressure. This pressure washer tip is best used for light

or delicate cleaning applications. It is recommended for light cleaning on wood

decks and other soft or delicate surfaces.

SOAP

Black - Soap spray tip

The black soap spray tip, is used for soap application. Soap is applied under low

pressure high volume for optimum performance. Soap cannot be applied under

high pressure with this machine.

Turbo Nozzle Tip

The nozzle rotates in a zero to 15 degree spray pattern in a circular motion to

break down tough dirt and grime. The spray pattern can cover area of 4 to 8 inches

wide, depending on a distance between the tip and the surface being cleaned.

Connect garden hose to pressure

washer water intake.

Assemble pressure washer gun to spray wand.

Insert high pressure hose into trigger

handle.

Turn on water at outlet.

Run water hose for 30 seconds with the

motor in OFF position. This helps drain air

from the tank and lines.

Connect power cord to wall outlet

Extension cord not recommended.

Turn on Pressure Washer

IMPORTANT: Ensure water outlet is On

before turning power On to avoid damage

to the pump.

NOTE:

AUTO ON/OFF SWITCH: This Pressure washer is equipped

with an Auto Start/Stop feature.

To operate: Turn the power switch to the On (I) position.

Pump will pressurize and shut down immediately.

Once the trigger of the gun is depressed the unit will turn on.

Unit will shut off and be in standby mode when trigger is

released.

1800 PSI / 1.1 GPM

ELECTRIC PRESSURE WASHER

GPW 1800

This Quick Start Guide is not a substitute for reading the operator's manual. To reduce the risk

of injury or death, user must read and understand operator's manual before using this product.

WARNING:

Set-up

2

5

Installing the upper handle

Push and hold the push-pin buttons on the sides of the upper

handle assembly (1) as you slide the handle onto the frame (2).

Installing the wheels

Insert the axle through the wheel.

Slide the washer over the axle pass the pin hole.

Insert the axle and wheel through the frame. Slide the washer

over the axle and insert the pin through the hole to firmly fasten

the wheel assembly.

Installing the gun holder

Line up the screw sleeves with the holes in the upper handle

and push through.

Insert the screw and turn clockwise with a Phillips head

screwdriver (not included) until the screw is tight.

6

9

Connect desired pressure tip.

Connect the high pressure hose to the

water outlet connector.

1

3

25

(1)

(2)

S

7

2

4

5

8

Push-pin

30

Axle

Wheel

WasherPin

1

11

UNPACKING

This product requires assembly.

• Carefully remove the product and any accessories from the box. Make sure that all the

contents from the packaging list are included.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping.

• Do not discard the packing material until you have carefully inspected and satisfactorily

operated the product.

• If any parts are damaged or missing, please call 1-888-909-6757 for assistance.

WARNING

Do not use this product if any parts on the Packing List are already assembled to your product

when you unpack it. Parts on this list are not assembled to the product by the manufacturer and

require customer installation. Use of a product that may have been improperly assembled could

result in serious personal injury.

WARNING

If any parts are damaged or missing do not operate this product until the parts are replaced. Use

of this product with damaged or missing parts could result in serious personal injury.

WARNING

Do not connect to power supply until assembly is complete. Failure to comply could result in

accidental starting and possible serious personal injury.

WARNING

Do not attempt to modify this product or create accessories not recommended for use with this

product. Any such alteration or modication is misuse and could result in a harzardous condition

leading to possible serious personal injury.

ASSEMBLY

ASSEMBLING THE HANDLE

See Figure 3.

• Push the handle into the groove.

• Insert the screw and turn clockwise with a screwdriver until the screw is tight.

ASSEMBLY

Fig. 3

ASSEMBLING THE SPRAY WAND

See Figure 4.

• Push the end of the spray wand into the trigger handle and rotate clockwise to secure.

• Pull on the spray wand to be certain it is properly secured.

Fig. 4

12

ASSEMBLY

13

Fig. 5

CONNECTING HIGH PRESSURE HOSE TO TRIGGER HANDLE

See Figure 5.

• Align the pressure hose with the trigger handle and push up and into position.

• With hose pushed into position on the trigger handle, secure in place by turning the hose lock

clockwise until fully tightened.

NOTE:

For easier installation of the hose to the unit or trigger, it is suggested to add pressure

washer or dish detergent to the rubber seal at each end of the hose. This will allow for easier

installation and a snug t.

CONNECTING THE GARDEN HOSE

See Figure 6.

CAUTION

Always observe all local regulations when connecting hoses to the water main. Some areas have

restrictions against connecting directly to public drinking water supply to prevent the feedback of

chemicals into the drinking water supply. Direct connection through a receiver tank or back ow

preventer is usually permitted.

• Uncoil the garden hose.

NOTE:

There must be a minimum of 10 feet of unrestricted garden hose between the water

intake and the garden hose faucet or shut off valve (such as a “Y” shut off connector).

• Run water through the hose (A) for 30 seconds to clean any debris from the hose.

• Inspect the screen in the water intake (B).

• If the screen is damaged, do not use the machine until the screen has been replaced.

• If the screen is dirty, clean it before connecting the garden hose to the machine.

• With the hose faucet turned completely off, attach the end of the garden hose to the water

intake. Tighten by hand only.

ASSEMBLY

14

Fig.6

B

A

WARNING

Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a

second is sufcient to inict serious injury.

WARNING

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so

could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING

Do not use any attachments or accessories not recommended by the manufacturer of this tool.

The use of attachments or accessories not recommended can result in serious personal injury.

WARNING

Never direct a water stream toward people or pets, or any electrical device. Failure to heed this

warning could result in serious injury.

APPLICATIONS

You may use this product for the purposes listed below:

• Cleaning boats, cars, trucks, motorcycles, outdoor furniture, grills, house siding, driveways,

patios and decks.

DETERGENT ADDING AND USE

Use only detergents designed for pressure washers; household detergents, acids, alkalines,

bleaches, solvents, ammable material, or industrial grade solution can damage the pump. Many

detergents may require mixing prior to use. Prepare cleaning solution as instructed on the solution

bottle.

SOAP APPLICATION

See Figure 7.

Soap is applied under low pressure high volume for optimum performance.

Soap can not be applied under high pressure with this machine.

To add detergent:

• Pour detergent in the detergent tank.

• Install the soap tank to the gun handle.

• Start the pressure washer and spray the detergent on a dry surface using long, even,

overlapping strokes. To prevent streaking, do not allow detergent to dry on the surface.

15

OPERATION

16

Fig.7

CAUTION

Use only approved pressure washer cleaners. Do not use bleach, chlorine,or any cleaners

containing acids.

NOTE:

Use a funnel, if needed, to prevent accidental spilling of the detergent outside the tank.

If any detergent is spilled during the lling process, make sure the unit is cleaned and dried

before proceeding.

17

STARTING AND STOPPING THE PRESSURE WASHER

See Figure 8.

CAUTION

Do not run the pump without the water supply connected and turned on.

• Connect the garden hose.

• Turn the water supply on, then squeeze the trigger and run water hose with motor in OFF

position until a steady stream of water appears. This helps drain air from tank and lines.

NOTE:

If the pressure washer pulsates and the water stream is intermittent turn the pressure

washer off and continue to bleed air out of the system. Ensure to check that the garden hose is

fully turned on and not kinked.

• After ensuring the On/Off switch is in the OFF ( O ) position, connect the pressure washer

to the power supply.

• Press the reset button on the pressure washer’s plug to make sure the unit is ready for

operation.

• Set the switch to the ON ( I ) position to start the motor.

• To stop the motor, release the trigger and press the switch to the OFF( O ) position.

NOTE:

The pressure washer may be on and the system may have pressure even when the

pump and/or motor cannot be heard running. Always use caution around the pressure washer.

CAUTION

Hold the trigger handle securely with both hands. Expect the trigger handle to move when the

trigger is pulled due to reaction forces. Failure to do so could cause loss of control and injury to

yourself and others.

NOTE:

AUTO ON/OFF SWITCH: This pressure washer is equipped with an auto start/stop

feature. To operate: Set the power switch to the On (I) position. Pump will pressurize and shut

down immediately. Once the trigger of the gun is depressed, the unit will turn on. Unit will shut

off and be in standby mode when trigger is released.

OPERATION

Fig. 8

ON/OFF Switch

18

OPERATION

USING THE SPRAY TIPS (See Figure 9)

Each of the spray tips has a different spray pattern. Before starting any cleaning job, determine

the best spray tip for the job. The following chart offers some general guidelines to help you

choose the best spray tip for your application.

NOTE: Always try spray tip in an inconspicuous area rst.

• Turn off the pressure washer and shut off the water supply. Pull trigger to release water

pressure.

• Engage the lock-out on the trigger handle by pushing the trigger lock button to the right.

• Pull out the desired spray tip from the tip storage on the handle.

• Pull back the quick-connect collar on the spray wand.

• Push the spray tip into place in the spray wand.

• Push the collar forward so that the spray tip is secured properly. Check to see that the spray tip

is secure.

NOTE: Make sure the faucet is turned on fully and that there are no kinks or leaks in the hose.

1-Pull back the quick-connect colla

r

2-Push the spray tip into place

3-Push the collar forward

1

2

3

Spray Tip

Spray Wand

SPRAY TIP

APPLICATION

25

O

Green - Narrow fan tip (25° )

■ The green pressure washer tip provides high versatility with its 25

degree angle tip. Referred to as the washing tip, because it provides

adequate pressure to remove dirt from surfaces, but is designed to

not damage many surfaces. This pressure washer tip is designed for

“sweeping” foliage or debris given its wide angle. This tip is versatile

due to its wide area of cleaning and strong pressure application.

40

O

White - Wide fan tip (40° )

■ The white 40 degree tip, referred to as the “fan” tip creates the widest

area of cleaning with relatively low pressure. This pressure washer tip is

best used for light or delicate cleaning applications. It is recommended

for light cleaning on wood decks and other soft or delicate surfaces.

Fig. 9

19

OPERATION

WARNING

NEVER change spray tips without engaging the lock-out on the trigger handle and NEVER point

the wand at your face or at others. The quick-connect feature contains small springs that could

eject the spray tip with some force. Failure to heed this may cause personal injury.

TO DISCONNECT A SPRAY TIP FROM THE SPRAY WAND ONCE THE CLEANING

JOB IS COMPLETE:

• Turn off the pressure washer and shut off the water supply. Pull trigger to release water

pressure.

• Remove the spray tip by placing hand over spray then pulling back the quick-connect collar.

Place spray tip in the tip storage area on the units folding handle.

USING THE SPRAY WAND TRIGGER (See Figure 10)

For greater control and safety, keep both hands on the trigger handle at all times.

• Pull back and hold the trigger to operate the pressure washer.

• Release the trigger to stop the ow of water through the tip.

TO ENGAGE THE LOCK-OUT:

• Push the lock-out down until it clicks into the slot.

TO DISENGAGE THE LOCK-OUT:

• Push the lock-out up and into its original position.

Fig. 10

Slot

Trigger

Lock out

OPERATION

OPERATING THE PRESSURE WASHER (See Figure 11)

Use only detergents designed for pressure washers. Many detergents may require mixing prior to

use. Prepare cleaning solution as instructed on the solution bottle.

• Turn the garden hose on then squeeze the high pressure trigger to relieve air pressure. Once a

steady stream of water appears, release the trigger.

• After ensuring the switch is in the OFF position, connect the pressure washer to the power

supply.

• Set the switch to the ON(I) position to start the motor.

• Turn the garden hose on then squeeze the high pressure trigger.

Fig. 11

MOVING THE PRESSURE WASHER

To move the pressure washer:

• Turn the pressure washer off. Point the spray wand in a safe direction and pull trigger to release

water pressure.

• Tilt the machine toward you until it balances on the wheels, then roll the machine to the desired

position.

20

La page charge ...

Greenworks GPW1703 Mode d'emploi

Greenworks GPW1703 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents