Vari-Lite VLZ SPOT Manuel utilisateur

USER'S MANUAL

1

All other brand or product names which may be mentioned in this manual are

trademarks or registered trademarks of their respective companies or organizations.

The information furnished in this manual is for informational use only and is

subject to change without notice. Please check

http://www.philips.com/entertainmentlighting for latest version.Vari-Lite assumes

no responsibility or liability for any errors or inaccuracies that may appear in this

manual. All information and graphics are property of Vari-Lite, 10911 Petal Street

Dallas, Texas 75238 USA.

Version as of: 10 January 2017

Part number: 02.9708.0001

VLZ Spot Luminaire User’s Manual

2

How To Obtain Warranty Service

A copy of the Vari-Lite Limited Warranty was included in the shipping package for

this VARILITE product.

To obtain warranty service, please contact customer service at 1-877-VARI-LITE

(1-877-827-4548), +1-214-647-7880, or [email protected]m and

request a Return Material Authorization (RMA) for warranty service. You will

need to provide the model and serial number of the item being returned, a

description of the problem or failure and the name of the registered user or

organization. If available, you should have your sales invoice to establish the date

of sale as the beginning of the warranty period.

Once you obtain the RMA, pack the unit in a secure shipping container or in its

original packing box. Be sure to clearly indicate the RMA number on all packing

lists, correspondence, and shipping labels. If available, please include a copy of

your invoice (as proof of purchase) in the shipping container. With the RMA

number written legibly on or near the shipping address label, return the unit, freight

prepaid, to:

Vari-Lite

Attention: Warranty Service (RMA# ________)

10911 Petal Street

Dallas Dallas, Texas 75238 USA

Attention: Warranty Service

As stated in the warranty, it is required that the shipment be insured and FOB our service center.

IMPORTANT! When returning products to Vari-Lite for repairs (warranty or out-of-

warranty) from a country other than the USA, “Philips Lighting Controls Division”,

must appear in the address block as the Importer of Record (IOR) on all shipping

documentation, Commercial Invoices, etc. This must be done in order to clear customs

in a timely manner and prevent returns.

FORE WORD

Compliance Notices

This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when this equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with Vari-Lite system,

service, and safety guidelines, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

harmful interference, in which case the user will be required to correct the

interference at his/her own expense.

Declaration of Conformity

We declare, under our sole responsibility, that this product complies with the relevant

clauses of the following standards and harmonized documents:

Safety

EN 60598-1:2015; EN 60598-2-17:1989+A2:1991;EN 62493:2015;EN

62031:2008+A1:2013+A2:2015;EN 62471:2008;Low Voltage Directive 2014/35/EU

EMC

EN 55015:2013

EN 61000-3-2:2014

EN 61000-3-3:2013

EN 61547:2009

EMC Directive 2014/30/EU

Same as Legal Entity

RoHS

EN 62321:2012

We certify that the product conforms to the protection requirements of council

directives: Low Voltage Directive 2014/35/EU, 2014/30/EU (EMC), and Restriction

of the use of certain Hazardous Substances in electrical and electronic equipment

Directive (RoHS), 2015/863. Equipment referred to in this declaration of conformity

was first manufactured in 2017 in compliance with these standards.

3

FCC

VARILITE VLZ SPOT Luminaire User’s Manual

4

Safety Notices

It is extremely important to read ALL safety information and instructions provided in

this manual and any accompanying documentation before installing and operating the

products described herein. Heed all cautions and warnings during installation and use

of this product.

Safety symbols used throughout this manual are as follows:

CAUTION advising of potential damage to product.

WARNING advising of potential injury or death to persons.

GENERAL INFORMATION PERTAINING TO PROTECTION AGAINST

ELECTRICAL SHOCK, FIRE, EXPOSURE TO EXCESSIVE UV RADIATION,

AND INJURY TO PERSONS CAN BE FOUND BELOW.

WARNING:

INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST FIRE

1 Luminaires may be mounted on any type of surface as long as mounting instructions are

followed. See instructions detailed in this manual.

2 Note distance requirement from combustible materials or illuminated objects for

VARILITE luminaires.

WARNING:

INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK

1 VARILITE luminaires are designed for dry locations only. Exposure to rain or

moisture may damage luminaire.

2 Disconnect power before servicing any VARILITE equipment.

3 Servicing to be performed by qualified personnel only.

FORE WORD

5

WARNING:

INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE

EXPOSURE TO UV RADIATION

1. Many VARI



LITE luminaires use a LED that produces UV radiation. DO NOT look

directly at LED.

2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet

screens shall be changed if they have become visibly damaged to such an extent that their

effectiveness is impaired. For example, by cracks or deep scratches.

WARNING: INSTRUCTIONS FOR PROTECTION AGAINST INJURY TO PERSONS

1. Exterior surfaces of the luminaire will be hot during operation. Use appropriate safety

equipment (gloves, eye protection, etc.) when handling and adjusting hot equipment and

components.

2. Luminaires will have a hot LED when operating. Disconnect power and allow LED to

cool before replacing.

3. LED emit ultraviolet radiation which can cause serious skin burn and eye inflammation.

Additionally, arc LED operate under high pressure at very high temperatures. Should the LED

break, there can exist a danger of personal injury and/or fire from broken LED particles being

discharged.

4. Wear eye protection when relamping.

5. Appropriate safety equipment (gloves, eye protection) should be used when handling

damaged LED.

6. If LED is touched with bare hands, clean LED with denatured alcohol and wipe with

lint-free cloth before installing or powering up the luminaire.

7. The LED shall be changed if it has become damaged or thermally deformed.

WARNING: RF INTERFERENCE

1. This is a Class A product. In a domestic environment this product may cause radio

interference, in which case, the user may be required to take adequate measures.

LED CHARACTERISTIC CONSIDERATIONS

1. LED require a period of time to relight after a power interruption or a severe voltage dip.

In some cases, LED will automatically relight after it has cooled depending on Power-Up

State configuration setting.

2. Burning position is Universal.

VARILITE VLZ SPOT Luminaire User’s Manual

6

Sicherheitshinweise

Es ist äußerst wichtig, ALLE Sicherheitsinformationen und -hinweise in diesem Handbuch

und dem beiliegenden Informations material zu lesen, bevor Sie die hierin beschriebenen

Produkte installieren bzw. bedienen. Halten Sie bei der Installation und dem Einsatz dieses

Produkts alle Warnhinweise und Vorsichtsmaßnahmen ein.

Folgende Sicherheitssymbole werden in diesem Handbuch verwendet:

VORSICHT - weist auf möglichen Produktschaden hin.

WARNUNG - weist auf mögliche Körperverletzung und Lebensbedrohung hin.

NACHSTEHEND FINDEN SIE ALLGEMEINE HINWEISE ÜBER

SICHERHEITSVORKEHRUNGEN GEGEN ELEKTROSCHOCK, FEUER,

ÜBERHÖHTE UVSTRAHLUNG UND KÖRPERVERLETZUNGEN.

WARNUNG: HINWEISE ZUM FEUERSCHUTZ

1. VARILITE -Scheinwerfer sind ausschließlich für den Einsatz mit bestimmten

Lampentyps. Achten Sie auf den Lampentyp (620 Watt LED), bevor Sie die jeweiligen

Lampen ersetzen. Die Installation eines anderen Lampentyps kann gefährlich sein.

2. Scheinwerfer können auf jeder beliebigen Oberfläche montiert werden, solange Sie die

Montageanweisungen befolgen. Detaillierte Hinweise finden Sie in diesem Handbuch.

3. Beachten Sie die Einhaltung des erforderlichen Sicherheitsabstandes der VARILITE

-Scheinwerfer von brennbarem Material oder beleuchteten Objekten.

WARNUNG: HINWEISE ZUM SCHUTZ GEGEN ELEKTROSCHOCK

1. VARI



LITE -Scheinwerfer eignen sich ausschließlich für trockene Standorte. Regen

oder Feuchtigkeit können die Scheinwerfer beschädigen.

2. Unterbrechen Sie die Stromzufuhr, bevor Sie mit der Arbeit an VARI



LITE -Geräten

beginnen.

3. Die Geräte sollten nur von qualifiziertem Personal gewartet werden.

FORE WORD

7

WARNING:

HINWEISE ZUM SCHUTZ GEGEN ÜBERHÖHTE UV-STRAHLUNG

1. Viele VARILITE -Scheinwerfer verwenden die Lampentyp, der UV-Strahlen abgibt.

SCHAUEN SIE NICHT direkt in die Lampe.

2. Es ist gefährlich, Leuchten ohne Linsen oder Blenden zu bedienen. Blenden, Linsen oder

Ultraviolettschirme müssen ausgetauscht werden, sofern deren Schutzwirkung durch

sichtbare Beschädigung (z. B. Sprünge oder Schrammen) eingeschränkt ist.

WARNING:

HINWEISE ZUM SCHUTZ GEGEN KÖRPERVERLETZUNGEN

1. Bei Betrieb sind die Außenflächen der Scheinwerfer heiß. Verwenden Sie bei der

Bedienung von aufgeheizter Apparatur die jeweils geeignete Sicherheitsausrüstung

(Handschuhe, Augenschutz etc.).

2. Bei Betrieb der Scheinwerfer ist die Lampe heiß. Unterbrechen Sie die Stromzufuhr und

lassen Sie die Lampe abkühlen, wenn Sie diese austauschen.

3. Bogenlampen senden ultraviolette Strahlen aus, die Hautverbrennungen und

Augenentzündungen verursachen können. Der Betrieb von Bogenlampen erfolgt unter

Hochdruck und bei hohen Temperaturen. Sollte die Lampe zerbrechen, besteht die Gefahr

von Körperverletzung bzw. von Feuer, das von Lampenteilen ausgelöst werden kann.

4. Tragen Sie beim Austausch der Lampen einen Augenschutz.

5. Die geeignete Sicherheitsausrüstung (Handschuhe, Augenschutz) sollte beim Umgang

mit beschädigten Lampen verwendet werden.

6. Wenn die Lampe mit bloßen Händen berührt wird, reinigen Sie sie mit denaturiertem

Alkohol und einem flusenfreien Tuch, bevor Sie die Scheinwerfer installieren oder in Betrieb

nehmen.

7. Wenn die Lampe beschädigt oder durch Hitzeeinwirkung deformiert ist, muß diese

ausgetauscht werden.

WARNING:

HF-INTERFERENZ

1. Es handelt sich um ein Produkt der Klasse A. In einer Wohnumgebung kann das Produkt

Hochfrequenzstörungen verursachen. In diesem Fall müssen eventuell geeignete Maßnahmen

getroffen werden.

BESONDERHEITEN VON BOGENLAMPEN

1. Bogenlampen benötigen eine gewisse Zeitdauer, um nach einem Stromausfall oder einem

Spannungsgefälle wieder aufzuleuchten. In einigen Fällen wird die Lampe nach Abkühlung

automatisch wieder aufleuchten, je nach der Systemkonfigurationseinstellung des

Lampeneinschaltungsstatus.

2. Die Brennposition ist Universal.

VARILITE VLZ SPOT Luminaire User’s Manual

8

Notes de sécurité

Avant de procéder à l’installation des produits décrits dans ce guide et de les mettre en marche,

il est extrêmement important de lire TOUS les renseignements et TOUTES les directives de

sécurité contenues dans ce guide ainsi que toute documentation jointe. Tenir compte de tous

les avertissements et suivre toutes les précautions pendant l’installation et l’utilisation de cet

appareil.

Les symboles de sécurité utilisés dans ce guide sont les suivants :

ATTENTION Ce symbole annonce que l’appareil risque d’être endommagé.

AVERTISSEMENT Ce symbole annonce qu’il y a risque d’accident grave ou

même fatal.

CETTE SECTION CONTIENT DES INFORMATIONS GÉNÉRALES POUR SE

PROTÉGER CONTRE LES DÉCHARGES ÉLECTRIQUES , LES INCENDIES,

L’EXPOSITION EXCESSIVE AUX RAYONS UV ET TOUT AUTRE ACCIDENT

POUVANT ENTRAÎNER DES BLESSURES.

AVERTISSEMENT:

DIRECTIVES POUR SE PROTÉGER CONTRE LES INCENDIES

1. Les luminaires VARILITE ont été conçus pour être utilisés uniquement avec certaines

type de lampes. Vérifier le type de lampe (620 Watt LED) avant de remplacer les lampes.

L’installation d’un autre type de lampe peut poser un danger.

2. Les luminaires peuvent être fixés sur tout type de surface tant que les directives de

montage sont respectées. Voir les explications détaillées dans ce guide.

3. Vérifier la distance à respecter entre les matériaux combustibles ou les objets illuminés et

les luminaires VARILITE .

AVERTISSEMENT:

DIRECTIVES POUR SE PROTÉGER CONTRE LES DÉCHARGES ÉLECTRIQUES

1. Les luminaires VARILITE sont conçus pour une utilisation au sec uniquement. Une

exposition à la pluie et à l’humidité risque d’endommager le luminaire.

2. Débrancher l’appareil avant de procéder à la révision de tout matériel VARILITE .

3. Les révisions doivent être effectuées uniquement par des personnes qualifiées.

FORE WORD

9

AVERTISSEMENT:

DIRECTIVES POUR SE PROTÉGER CONTRE UNE EXPOSITION EXCESSIVE AUX

RAYONS UV

1. Plusieurs luminaires VARILITE utilisent une lampe qui produit des rayons UV. NE

PAS fixer son regard sur la lampe.

2. L’utilisation des luminaires sans lentille ou blindage pose des risques. Tous blindages,

lentilles ou écrans ultraviolet visiblement endommagés au point que leur efficacité en est

affectée doivent être remplacés, par exemple s’il y a des fissures ou de profondes rayures.

AVERTISSEMENT:

DIRECTIVES POUR SE PROTÉGER CONTRE LES ACCIDENTS POUVANT

ENTRAÎNER DES BLESSURES

1. Les surfaces externes du luminaire deviennent brûlantes quand l’appareil est en marche.

Pour manœuvrer ou ajuster des appareils brûlants et leurs composants, se protéger

suffisamment (gants, protection pour les yeux, etc.).

2. La lampe du luminaire est brûlante lorqu’il est en marche. Débrancher le courant et

attendre que la lampe ait refroidi avant de la remplacer.

3. Les lampes à arc émettent des rayons ultraviolets pouvant causer de graves brûlures sur la

peau et une inflammation des yeux. De plus, les lampes à arc fonctionnent sous haute tension

à de très hautes températures. Si la lampe se casse, les particules de la lampe cassée peuvent

causer blessures et/ou incendie en s’éparpillant.

4. Se protéger les yeux pour remplacer la lampe.

5. Utiliser des appareils de protection appropriés (gants, protection des yeux) pour manier

des lampes endommagées.

6. Si la lampe a été touchée avec des mains nues, la nettoyer avec de l’alcool dénaturé et

l’essuyer avec un chiffon non-pelucheux avant d’installer ou de brancher le luminaire.

7. Si la lampe a été endommagée ou a reçu une déformation thermique, elle doit être

remplacée.

AVERTISSEMENT:

INTERFÉRENCE

RF

1. Cet appareil est de Classe A. Dans un environnement domestique, cet appareil peut

causer des interférences radio, et si c’est le cas, l’utilisateur peut avoir à prendre des mesures

adéquates.

CONSIDÉRATIONS DES CARACTÉRISTIQUES DE LAMPES À ARC

1. Après une interruption de courant ou une baisse importante de voltage, les lampes à arc

mettent du temps avant de se rallumer. Dans certains cas, la lampe se rallumera

automatiquemet après s’être refroidie. Cela dépend de la manière dont le système est réglé

pour le statut de mise en marche de la lampe.

2. La position Brûler est Universelle.

VARILITE VLZ SPOT Luminaire User’s Manual

10

Aviso sobre Seguridad

Es muy importante leer TODA la información e instrucciones sobre seguridad que se indica

en este manual así como en los documentos adjuntos antes de instalar y operar los productos

descritos. Se debe prestar atención a todos los avisos y advertencias durante la instalación y

uso de este producto.

Los símbolos de seguridad usados en este manual son los siguientes:

CUIDADO, indica posibles daños al producto.

ADVERTENCIA, indica posibles lesiones o muerte a las personas.

LA INFORMACIÓN GENERAL RELACIONADA A LA PROTECCIÓN

CONTRAGOLPES DE CORRIENTE ELÉCTRICA, INCENDIO, EXPOSICIÓN

EXCESIVA A RADIACIÓN ULTRA VIOLETA Y LESIONES A LAS PERSONAS SE

PUEDE ENCONTRAR SEGUIDAMENTE:

ADVERTENCIA:

INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA INCENDIO

1. Las luminarias VARILITE han sido diseñadas para ser usadas solamente con algunas

lámparas. Tome nota del tipo de lámpara (620 Watt LED) antes de reemplazarla. Instalación

de otro tipo de lámpara puede ser peligroso.

2. Las luminarias se pueden instalar en cualquier tipo de superficie siempre que se sigan las

instrucciones de instalación. Vea las instrucciones detalladas en este manual.

3. Tome nota de los requerimientos de distancia de materiales combustibles u objetos

iluminados para las luminarias VARILITE .

ADVERTENCIA:

INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA CHOQUE ELÉCTRICO

1. Las luminarias VARILITE están diseñadas solamente para lugares secos. La

exposición a la lluvia o humedad pueden dañar la luminaria.

2. Desconecte la energía antes de dar servicio a cualquier equipo de VARILITE .

3. El servicio debe ser realizado solamente por personal calificado.

FORE WORD

11

ADVERTENCIA:

INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA LA EXPOSICIÓN

EXCESIVA DE RADIACIÓN ULTRA VIOLETA

1. Muchas luminarias VARILITE usan un tipo de lámpara que produce radiación UV.

NO mire directamente a la lámpara.

2. Es peligroso operar luminarias sin lentes o protectores. Debe cambiar los protectores,

lentes o pantallas ultravioletas si se aprecia que han sido dañadas, y que su efectividad pudiera

estar deteriorada. Por ejemplo, si tuvieran rajaduras o raspaduras profundas.

ADVERTENCIA:

INSTRUCCIONES PARA PROTECCIÓN CONTRA LESIONES DE PERSONAS

1. Las superficies exteriores de las luminarias están calientes durante su operación. Use un

equipo de seguridad apropiado (guantes, protección para los ojos, etc.) cuando haga ajustes en

el equipo y componentes que están calientes.

2. Cuando las luminarias están en operación la lámpara estará muy caliente. Desconecte la

energía y deje que la lámpara se enfríe antes de reemplazarla.

3. Las lámparas de arco emiten radiaciones ultravioletas que pueden ocasionar serias

quemaduras a la piel e inflamación a los ojos. Además, las lámparas de arco operan a alta

presión y muy alta temperatura. Si la lámpara se rompe, puede existir el peligro de lesiones al

personal o un incendio ocasionado por las partículas de la lámpara rota que se caen.

4. Use protección para los ojos cuando vuelve a colocar una lámpara nueva.

5. Use un equipo de seguridad apropiado (guantes, protección para los ojos, etc.) cuando

trabaje con lámparas dañadas.

6. Si toca la lámpara con las manos, limpie la lámpara con alcohol desnaturalizado y con

tela sin pelusas antes de instalar o volver a conectar la luminaria.

7. Cambie la lámpara si está dañada o deformada termicamente.

ADVERTENCIA:

INTERFERENCIA

RF

1. Este es un producto de Clase A. En el ambiente de la casa este producto puede ocasionar

radiointerferencia, en cuyo caso, el usuario debe tomar las medidas adecuadas.

CONSIDERACIONES SOBRE LAS CARACTERÍSTICAS DE LA LÁMPARA DE ARCO

1. Las lámparas de arco requieren un período de tiempo para volver a iluminarse después de

una interrupción de energía o de una severa caída de voltaje. En algunos casos, la lámpara se

volverá a iluminar en forma automática después que se ha enfriado dependiendo de la

configuración del sistema de energía de la lámpara.

2. La posición de encendido es universal.

VARILITE VLZ SPOT Luminaire User’s Manual

0

Introduction

About This Manual .................................................................................................................................... 1

Additional Documentation ....................................................................................................................... 1

Text Conventions ....................................................................................................................................... 2

Customer Service ....................................................................................................................................... 2

Chapter 1. Description

Features

VLZ SPOT Standard Features................................................................................................................. 4

Co mpo nent s

Included Items ...................................................................................................................... 5

Items/Accessories ................................................................................................................. 6

Overview .............................................................................................................................. 7

Chapter 2. Installation

Special Warnings

Exceptional Safety Information for the VLZ SPOT Luminaire .................................................... 10

Power and Data Cabling Requirement

Power ........................................................................................................................................................... 11

DMX Termination Connector .................................................................................................................... 13

Installation Procedures

Hanging the Luminaire .......................................................................................................... 14

Floor Mounting the Luminaire ................................................................................................ 16

Powering Up

Power Up and Configuration Procedure ................................................................................................... 17

Addressing

Program Starting Address ............................................................................................................................ 18

Program Starting Address Without Calibrating Luminaire .......................................................................... 18

Chapter 3. Operation

VLZ SPOT DMX Channels

VLZ SPOT Channel Mapping ................................................................................................ 20

VLZ SPOT Control Channel Functions .................................................................................... 29

VLZ SPOT DMX Mapping

VLZ SPOT Color Control .......................................................................................................................... 31

Color Mixing............................................................................................................................................... 31

Fixed Color Wheel 1 .................................................................................................................................. 31

Fixed Color Wheel 2 .................................................................................................................................. 32

Fixed Color Wheels DMX Map ................................................................................................................ 33

VLZ SPOT Beam Control.......................................................................................................................... 33

Strobe........................................................................................................................................................... 33

VLZ SPOT Gobo/Effects Control ............................................................................................................. 34

Overview of Gobos used in VLZ SPOT Luminaire ................................................................................. 34

Gobo Use and Positioning .......................................................................................................................... 34

Gobo Wheels 1and 2 .................................................................................................................................. 35

Index and Rotation ..................................................................................................................................... 37

TABLE OF CONTENTS

1

VLZ SPOT Luminaire Timing

VLZ SPOT Timing Channel Information ................................................................................................. 39

Updating Software

Software From Luminaire to Luminaire ................................................................................... 41

Chapter 4. Menu System

Menu Operation

What Is the Menu System? ........................................................................................................................ 45

Controls Operation ..................................................................................................................................... 45

Default State ................................................................................................................................................ 46

Menu Functions

VLZ SPOT Menu System Function Chart ................................................................................ 47

Menu Function Definitions ..................................................................................................... 50

Self-Tests

Running Parameter Tests ............................................................................................................................ 51

Appendix A. Luminaire Care and Routine Maintenance

Equipment Handling

Locations/Use ............................................................................................................................................. 54

LED ............................................................................................................................................................. 54

Servicing ..................................................................................................................................................... 54

Heat.............................................................................................................................................................. 54

LED Features/Benefits ............................................................................................................................... 54

Solid State Electronics ............................................................................................................................... 55

Electrostatic Discharge (ESD) ................................................................................................................... 55

Printed Circuit Boards (PCBs) ................................................................................................................... 55

Troubleshooting

Error Messages ..................................................................................................................... 56

Troubleshooting Guide ............................................................................................................ 57

Routine Maintenance

LED Replacement ...................................................................................................................................... 58

Gobo Replacement - Gobo Wheels ........................................................................................................... 59

Cleaning Optics, Filters and Gobos ........................................................................................................... 62

Followspot Handle Accessory Installation (Optional) ............................................................................. 63

Appendix B. Technical Specifications

VLZ SPOT Luminaire .............................................................................................................................. 66

VARILI TE VLZ Spot Luminaire User’s Manual

1

Introduction

About This Manual

This manual provides necessary information regarding safety, installation, operation and

routine maintenance for VARILITE VLZ SPOT Luminaires. Familiarizing yourself

with this information will help you to get the most out of your luminaire.

WARNING: It is important to read ALL accompanying safety and installation

instructions to avoid damage to the product and potential injury to yourself or others.

This manual covers the following models:

Model Part Number Source

VLZ SPOT Luminaire 6.06.02.01.2917-0 620Watt Atria TM SUL620-80-R70-000 LED

Additional Documentation

A service manual, only for Authorized VARILITE Service Centers and

technicians, of the VLZ SPOT Luminaire is available in electronic (PDF) format:

 Luminaire Service Manual

 Testing, Troubleshooting, Component Replacement and Illustrated Parts Breakdown.

Note: Performing maintenance procedures may void the product warranty. Refer to the

Vari-Lite Limited Warranty card included in the product shipping package for more

information.

For more information on installing DMX512 control systems, the following publication is

available for purchase from the United States Institute for Theatre Technology (USITT),

"Recommended Practice for DMX512: A Guide for Users and Installers, 2nd edition"

(ISBN: 9780955703522). USITT Contact Information:

USITT Inc.

315 South Crouse Avenue Suite 200

Syracuse, NY 13210

Tel: 800-938-7488 or +1-315-463-6463

Fax: 866-398-7488 or +1-315-463-6525

www.usitt.org

INTRODUCTION:ABOUT THIS MUNUAL

2

Text Conventions

The following styles and meanings are used throughout this manual:

Style Meaning

[Button]

Front panel button. Example: Press [MODE/ESC]/

Press either arrow button at Menu Display.

MENU

LCD Menu Display read-out. Example: Press

arrows until DMX appears.

Customer Service

Our Goal

At Vari-Lite, we are committed to providing you the highest quality in customer

service. Our comprehensive resources are available to help your business succeed and

ensure you get the full benefit of being a Vari-Lite customer. Whether your needs are

telephone troubleshooting assistance, product training or technical service, our full-time

staff of experienced professionals is on-hand to provide support.

How to Reach Us

For assistance in your area, call the dealer from which your product was purchased.

or

Contact an Authorized VARILITE Service Center.

or

Contact the Vari-Lite Customer Service Department, 9am -6pm CST Monday through

Friday, at the following:

phone: 1-877-VARI-LITE (1-877-827-4548) or +1-214-647-7880

email: entertainm[email protected]m

Additional Resources

For additional resources and documentation, please visit our website at

http://www.philips.com/entertainmentlighting

and follow the Support link.

VARILITE VLZ SPOT Luminaire User’s Manual

3

CHAPTER 1.

Description

This chapter contains descriptions of luminaire features and components, along with a list of

accessories which are available.

 Features

 Components

4

Features

VLZ SPOT Standard Features

The VLZ SPOT Luminaire has the following standard features:

 Zoom optics system with 7° to 50° range.

 CMY color mixing system.

 Two fixed color wheels.

 Variable CTO color temperature correction wheel.

 Mechanical iris provides continuous beam size control.

 Two gobo/effects wheels combine to each offer rotatable,

indexable gobo positions and one open position.

 Independent, drop-in armature that rotates with prism.

 Independent, drop-in armature that contains variable frost.

 Full-field dimming system.

 Dual blade strobe system.

 Repositional pan/tilt system.

 Control by DMX512 protocol.

 Fan cooled.

 620W Atria TM SUL620-80-R70-000 LED.

Note: For more information and product specifications, refer to “Technical

Specifications” on page 66.

VARILITE VLZ SPOT Luminaire User’s Manual

5

Features

Included Items

The following illustration shows all items included with the luminaire:

Figure 1-1: VLZ SPOT Luminaire Included Items

Note: * Please Check with the local Vari-Lite Office or Authorized Vari*Lite dealer for availability on accessories.

DESCRIPTION:COMPONENTS

1

QuickStart Guide(this document)

Neutrik® powerCON® True1

AC Input Connector

6

Replacement Items/Accessories

The following optional and/or replacement items can be ordered directly from your

Authorized Vari-Lite Dealer. (Please order by Vari-Lite part number.)

Vari-Lite Part Number Accessory Description

6.04.05.03.0337 Atria TM SUL620-80-R70-000

5.05.01.99.0110-0 Safety Cable Assembly

5.04.01.07.0375 Rotating Gobo Wheel Assembly 1

5.04.01.07.0376 Rotating Gobo Wheel Assembly 2

VARILITE VLZ SPOT Luminaire User’s Manual

DESCRIPTION:COMPONENTS

1

La page charge ...

Vari-Lite VLZ SPOT Manuel utilisateur

Vari-Lite VLZ SPOT Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents