Candy FCD545N Manuel utilisateur

Catégorie
Fours
Taper
Manuel utilisateur

Ce manuel convient également à

USER INSTRUCTIONS
OVENS
CANDY HOOVER GROUP S.R.L. • Via Comolli 16, 20861 Brugherio (MB) Italy
EN
02
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES
FR
15
Safety Indications
During cooking, moisture may condense inside the oven cavity or on the
glass of the door. This is a normal condition. To reduce this effect, wait 10-
15 minutes after turning on the power before putting food inside the oven.
ln any case, the condensation disappears when the oven reaches the
cooking temperature.
Cook the vegetables in a container with a lid instead of an open tray.
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
WARNING: the accessible parts can become hot when the grill is in use.
Children should be kept at a safe distance.
WARNING: ensure that the appliance is switched off before replacing the
bulb, to avoid the possibility of electric shocks.
WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not be
powered by an external switching device, such as a timer, or be connected
to a circuit that is regularly switched on and off.
Children under 8 should be kept at a safe distance from the appliance if
not continuously supervised.
Children should not play with the appliance.
The appliance can be used by those aged 8 or over and by those with
limited physical, sensorial or mental capacities, without experience or
knowledge of the product, only if supervised or provided with instruction
as to the operation of the appliance, in a safe way with awareness of the
possible risks.
Cleaning and maintenance should not be carried out by unsupervised
children.
Do not use rough or abrasive materials or sharp metal scrapers to clean
the oven door glasses, as they can scratch the surface and cause the glass
to shatter.
The oven must be switched off before removing the removable parts.
After cleaning, reassemble them according the instructions.
EN 02
EN 03
Only use the meat probe recommended for this oven.
Do not use a steam cleaner for cleaning operations.
Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must have
ground contact connected and in operation. The earth conductor is
yellow-green in colour. This operation should be carried out by a suitably
qualified professional. ln case of incompatibility between the socket and
the appliance plug, ask a qualified electrician to substitute the socket with
another suitable type. The plug and the socket must be conformed to the
current norms of the installation country. Connection to the power source
can also be made by placing an omnipolar breaker between the appliance
and the power source that can bear the maximum connected load and
that is in line with current legislation. The yellow-green earth cable should
not be interrupted by the breaker. The socket or omnipolar breaker used
for the connection should be easily accessible when the appliance is
installed.
• The disconnection may be achieved by having the plug accessible or by
incorporating a switch in the fixed wiring in accordance with the wiring
rules.
• lf the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department. The type of power cable must be H05V2V2-
F. This operation should be carried out by a suitably qualified professional.
The earth conductor (yellow-green) must be approximately 10 mm longer
than the other conductors. For any repairs, refer only to the Customer Care
Department and request the use of original spare parts.
Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
Any excess of spilled material should be removed before cleaning.
A long power supply failure during an occurring cooking phase may cause
a malfunction of the monitor. ln this case contact customer service.
The appliance must not be installed behind a decorative door in order to
avoid overheating.
EN 04
When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity. The shelf must be inserted
completely into the cavity.
• WARNING: Do not line the oven walls with aluminium foil or single-use
protection available from stores. Aluminium foil or any other protection, in
direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
WARNING: Never remove the oven door seal.
• CAUTION: Do not refill the cavity bottom with water during cooking or
when the oven is hot.
No additional operation/setting is required in order to operate the
appliance at the rated frequencies.
Oven Cleaning and Maintenance
General Instructions
6
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Conformity declaration
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
8
3.1 Display description
3.2 Setting the correct time
3.3 Cooking modes
Use of the Oven
9
4.1 General notes on cleaning
4.2 Maintenance
• Removing and cleaning wire racks
• Removal of the oven window
• Removal and cleaning of the glass
door
• Changing the bulb
12
5.1 F.A.Q.
Troubleshooting
14
Summary
EN 05
1. General Instructions
We thank you for choosing one of our products. For the
best results with your oven, you should read this
manual carefully and retain it for future reference.
Before installing the oven, take note of the serial
number so that you can give it to customer service staff
if any repairs are required. Having removed the oven
from its packaging, check that it has not been damaged
during transportation. If you have doubts, do not use
the oven and refer to a qualified technician for advice.
Keep all of the packaging material (plastic bags,
polystyrene, nails) out of the reach of children. When
the oven is switched on for the first time, strong
smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven
heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to
dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where
the instructions contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the
model you have purchased.
1.1 Safety Indications
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot
be held responsible for any damage resulting from improper, incorrect or unreasonable usage.
The use of any electrical appliance implies the observance of some fundamental rules:
- do not pull on the power cable to disconnect the plug from the socket;
- do not touch the appliance with wet or damp hands or feet;
- in general the use of adaptors, multiple sockets and extension cables is not recommended;
- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.
1.2 Electrical Safety
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section that can ensure correct supply to the oven.
CONNECTION
The oven is supplied with a power cable that should only be connected to an electrical supply with 220-
240 Vac power between the phases or between the phase and neutral. Before the oven is connected to
the electrical supply, it is important to check:
- power voltage indicated on the gauge;
- the setting of the disconnector.
The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of
the power supply.
WARNING
Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the
power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by an earth connection that has
defective continuity.
EN 06
1.3 Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium
foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the
enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It is better to extend the
cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,
we advise you only use dishes and baking moulds resistant to very high temperatures.
1.4 Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required
to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer cannot be held
responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specified on last page according to the type of fitting.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available
so that the oven can be connected to this if it is removed from the space in which it is installed. The
power cable must only be substituted by technical service staff or by technicians with equivalent
qualifications.
A low light around the central main switch could be present when the oven is off. This is a normal
behavior. I can be removed just turning the plug upside down or swapping the supply terminals.
1.5 Waste management and environmental protection
This appliance is labelled in accordance with European Directive 2012/19/EU regarding
electric and electronic appliances (WEEE). The WEEE contain both polluting substances
(that can have a negative effect on the environment) and base elements (that can be
reused). It is important that the WEEE undergo specific treatments to correctly remove and
dispose of the pollutants and recover all the materials. Individuals can play an important
role in ensuring that the WEEE do not become an environmental problem; it is essential to
follow a few basic rules:
- the WEEE should not be treated as domestic waste;
- the WEEE should be taken to dedicated collection areas managed by the town council or a registered
company.
In many countries, domestic collections may be available for large WEEEs. When you buy a new
appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the appliance is of an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently
as possible, because heat from the cavity disperses every time it is opened. For a significant energy
saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and
use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any
heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the cooking process to start at the
reduced tariff time slot.
1.6 Declaration of compliance
• By placing the mark on the appliance, we are confirming compliance to all relevant European
safety, health and environmental requirements which are applicable in legislation for this product.
EN 07
2. Product Description
2.1 Overview
1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Metal grill
4. Drip pan
5. Fan (behind the steel plate)
6. Oven door
2.2 Accessories
Drip pan
1
Collects the residues that drip during the cooking
of foods on the grills.
Metal grill
2
Holds baking trays and plates.
EN 08
select
1
2
3
5
4
6
Lateral wire grids
3
It located at both sides of the oven cavity. It holds
metal grills and drip pans.
4
No pre-heating is required for rotisserie cooking.
Cooking with the door closed. The energy
consumption is 90-95% less than traditional
system. When the oven is in use, any unused
accessories should be removed from the oven.
•Unscrew the hooks
•Put the spit into the meat
•Fix the meat with the hooks
•Tighten the screws
•Insert the spit into the motor hole
•Demount the handle before to start cooking.
Turnspit
3. Use of the Oven
3.1 Display description
EN 09
select
WARNING: the first operation to carry out after the oven has been
installed or following the interruption of power supply (this is
recognizable the display pulsating and showing 12:00 ) is setting
the correct time. This is achieved as follows.
•Push the central button 4 times
•Set time with "-" "+" buttons.
•Release all buttons.
ATTENTION: The oven will only operate providing the clock is set.
00:00
select
3.2 Setting the correct time
8
1. Minute minder
2. Clock setting
3. Cooking time
4. End of cooking
5. Temperature or clock display
6. LCD display adjustment controls
7. Thermostat selector knob
8. Function selector knob
select
8
2.3 First Use
PRELIMINARY CLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
WARNING : the first operation to carry out after the oven
has been installed or following the interruption of power
supply (this is recognizable the display pulsating and
showing 12:00 ) is setting the correct time. This is achieved
as follows.
•Push the central button.
•Set time with "-" "+" buttons.
•Release all buttons.
ATTENTION: The oven will only operate providing the clock is
set.
FUNCTION
HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED HOW TO USE
KEY LOCK
•Child Lock function is
activated by touching Set
(+) for a minimum of 5
seconds. From this
moment on all other
function are locked and
the display will flash
STOP and preset time
intermittently.
•Child Lock function is
deactivated by touching
touchpad Set (+) again
for a minimum of 5
seconds. From this
moment on all functions
are selectable again.
•Push the central button
1 times
•Press the buttons "-" "+"
to set the required time
•Release all the buttons
•When the set time as
elapsed an audible alarm
is activated (this alarm
will stop on its own,
however it can be
stopped immediately by
pressing the button)
SELECT.
•Sounds an alarm at the
end of the set time.
•During the process, the
display shows the
remaining time.
•Allows to use the oven as
alarm clock (could be
activated either with
operating the oven or with
out operating the oven)
• Push the central button
2 times
Press the buttons "-" or
"+"to set the lenght of
cooking required
• Release all buttons
Set the cooking
function with the oven
function selector
• It allows to preset the
cooking time required for
the recipe chosen.
• To check how long is left
to run press the SELECT
button 2 Times.
To alter/change the
preset time press SELECT
and "-" "+" buttons.
•Push any button to
stop the signal. Push the
central button to return
to the clock
function.
•When the time is elapsed
the oven will switch off
automatically.
Should you wish to stop
cooking earlier either turn
the function selector to 0, or
set time to 0:00
(SELECT and "-" "+" buttons)
•At the time set, the
oven will switch off. To
switch off manually, turn
the oven function
selector to position O.
•Enables you to set the
end of cooking time
•To check the preset
time push the central
button 3 times
•To modify the preset
time press buttons
SELECT + "-" "+"
•Push the central button
3 times •Press the
buttons "-" "+" to set the
time at which you wish
the oven to switch off
•Release the buttons
•Set the cooking function
with the oven function
selector.
•This function is typically
used with “cooking time”
function.
For example if the dish has
to be cooked for 45 minutes
and needs to be ready by
12:30, simply select the
required function, set the
cooking time to 45 minutes
and the end of cooking time
to 12:30.
•At the end of the cooking
set time, the oven will
switch off automatically and
an audible alarm will ring.
•Cooking will start
automatically at 11:45
(12:30 minus 45 mins) and
will continue until the pre-
set end-of-cooking-time,
when the oven will switch
itself off automatically.
WARNING.
If the END of cooking is
selected without setting the
length of cooking time, the
oven will start cooking
immediately and it will stop
at the END of cooking time
set.
MINUTE
MINDER
COOKING
TIME
END OF
COOKING
EN 10
T °C
range
Function
Dial
Function (Depends on the oven model)
*Tested in accordance with the EN 60350-1 for the purpose of energy consumption declaration and energy class.
3.3 Cooking Modes
LAMP: Turns on the oven light.
GRILL: use the grill with the door closed.
The top heating element is used alone and you can adjust the temperature. Five minutes
preheating is required to get the elements red-hot. Success is guaranteed for grills, kebabs and
gratin dishes. White meats should be put at a distance from the grill; the cooking time is longer,
but the meat will be tastier. You can put red meats and fish fillets on the shelf with the drip tray
underneath. The oven has two grill positions: Grill: 2140 W
CONVECTION + FAN: We recommend you use this method for poultry, pastries, fish and
vegetables. Heat penetrates into the food better and both the cooking and preheating times
are reduced. You can cook different foods at the same time with or without the same
preparation in one or more positions. This cooking method gives even heat distribution and the
smells are not mixed. Allow about ten minutes extra when cooking foods at the same time.
CONVENTIONAL: Both top and bottom heating elements are used. Preheat the oven for about
ten minutes. This method is ideal for all traditional roasting and baking. For seizing red meats,
roast beef, leg of lamb, game, bread, foil wrapped food (papillotes), flaky pastry. Place the food
and its dish on a shelf in mid position.
DEFROST: When the dial is set to this position. The fan circulates air at room temperature
around the frozen food so that it defrosts in a few minutes without the protein content of the
food being changed or altered.
BOTTOM HEATING + FAN: The bottom heating element is used with the fan circulating the air
inside the oven. This method is ideal for juicy fruit flans, tarts, quiches and té.
It prevents food from drying and encourages rising in cakes, bread dough and other bottom-
cooked food. Place the shelf in the bottom position.
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
50 ÷ MAX
The "COOK LIGHT" function allows you to cook in a healthier way, by reducing the amount of
fat or oil required. Thanks to the use of the grill and fan combined with a pulsating cycle of air, it
will retain the moisture content of the food, grilling the surface and using a shorter cooking
time, without compromising on taste. It is particularly suitable for cooking meat, roasted
vegetables and omelettes. The cycle of pulsed air keeps the humidity inside the oven and the
moisture content of the food, preserving the nutritional values and ensuring a rapid uniform
cooking process.
Try all your recipes and reduce the amount of dressing you usually use and experience the
lightness of this new function!
50 ÷ MAX
PIZZA: With this function hot air circulated in the oven to ensure perfect result for dishes such
as pizza or cake.
50 ÷ MAX
EN 11
CONVECTION + TURNSPIT: The hearth and top resistors of the oven are in operation. It's
cooking traditional adapted to roasts and poultry, and not requiring the addition of fat.
50 ÷ MAX
GRILL + TURNSPIT: use the turnspit with the door closed.
The top heating element is used with the turnspit rotating the food to be cooked. The heating
temperature can be adjusted as required. The turnspit is best used for medium-sized items.
Ideal for rediscovering the taste of traditional roast. No preheating is required for turnspit
cooking.
50 ÷ MAX
*
*
4. Oven cleaning and maintenance
4.1 General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
GLASS PARTS
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
OVEN WINDOW SEAL
If dirty, the seal can be cleaned with a slightly damp sponge.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
DRIP PAN
After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in
hot water, using a sponge and washing-up liquid.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.
REMOVING AND CLEANING WIRE RACKS
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are
dried afterwards.
3. After the cleaning process install the wire racks in reverse order.
4.2 Maintenance
EN 12
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
3. Replace the window by carrying out the procedure in reverse.
LOW-E
1
2
3
1.
2.
3.
4.
5.
6.
7.
REMOVAL AND CLEANING OF THE GLASS DOOR
1. Open the oven door.
2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove
the second and third glass (if present)).
7. At the end of cleaning or substitution, reassemble the parts in reverse order.
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.
EN 13
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
The child lock is on
A cooking function and
temperature has not been set
Deactivate the child lock
Ensure that the necessary
settings are correct
The oven does not heat up
The oven does not heat up
EN 14
FR 15
• Pendant la cuisson, de l’humidité peut se condenser à l’intérieur de la
cavité ou sur la vitre de la porte. Il sagit d’un phénomène normal. Pour
réduire cet effet, attendez 10-15 minutes après avoir allumé lappareil
avant de mettre les aliments au four. La condensation dispartra de
toutes façons s que le four aura atteint la température de cuisson.
Cuisez les légumes dans un cipient avec couvercle plut que dans un
ustensile ouvert.
Évitez de laisser des aliments à l’inrieur du four plus de 15-20 minutes
aps cuisson.
AVERTISSEMENT : Lappareil et ses parties accessibles chauffent
pendant l’utilisation.
Faites attention à ne pas toucher les parties chaudes.
AVERTISSEMENT : Les parties accessibles peuvent devenir très chaudes
quand le grill est en marche. Les enfants doivent être tenus à une distance
de curité.
• AVERTISSEMENT : Vérifiez que l’appareil est éteint avant de remplacer
l’ampoule, pour éviter le risque de chocs électriques.
• AVERTISSEMENT : Afin d’éviter tout risque lié à la réinitialisation
accidentelle de l’interrupteur thermique, l’appareil ne doit pas être
alimenté par un dispositif de commutation externe, tel quune minuterie,
ou relié à un circuit régulièrement allumé et éteint.
Les enfants de moins de 8 ans doivent rester à une distance de sécuri
de l’appareil s’ils ne sont pas surveillés en permanence.
Les enfants ne doivent pas jouer avec l’appareil.
Lappareil peut être utilisé par des enfants de plus de 8 ans et par des
personnes dont les capacités physiques, sensorielles ou mentales sont
limitées, sans expérience ni connaissance du produit, uniquement s’ils
sont surveillés ou s’ils ont été infors de la manière d’utiliser l’appareil,
en toute sécuriet qu’ils comprennent les risques possibles.
Le nettoyage et l’entretien ne doivent pas être effectués par des enfants
sans surveillance.
N’utilisez pas de matériaux rugueux ou abrasifs ou de racloirs
Conseils De Securite
FR 16
talliques acérés pour nettoyer les vitres des portes des fours, car cela
pourrait rayer la surface et provoquer la rupture de la vitre.
Coupez le four avant de retirer les pièces amovibles.
Après le nettoyage, remontez-les selon les instructions.
Utilisez uniquement la sonde à viande recommandée pour ce four.
Nutilisez pas un nettoyeur à vapeur pour le nettoyage.
Branchez le ble d’alimentation sur une prise de courant qui supporte
le voltage (le courant et la charge sont indiqués sur l’étiquette) et rifiez
la présence d’une mise à la terre. La prise d’alimentation doit supporter la
charge indiquée sur l’étiquette et être dotée d’une mise à la terre en état
de fonctionnement. Le conducteur de mise à la terre est jaune et vert.
Cette opération doit être exécutée par le personnel qualifié. En cas
d’incompatibili entre la prise d’alimentation et la fiche du ble de
l’appareil, demandez à un électricien professionnel de remplacer la prise
d’alimentation par un dispositif compatible.
La fiche du câble d’alimentation et la prise d’alimentation doivent être
conformes aux normes en vigueur dans le pays d’installation.
Il est possible de brancher lappareil à la prise d’alimentation en installant
entre l’appareil et la prise d’alimentation un disjoncteur multipolaire qui
supporte la charge électrique maximale, conformément aux lois en
vigueur.
Le conducteur jaune et vert de mise à la terre ne doit pas être bloqpar
le disjoncteur. La prise dalimentation ou le disjoncteur multipolaire utilisé
pour le branchement doit rester à tout moment accessible après
installation de l’appareil.
• Le débranchement doit se faire à l’aide soit de la prise d’alimentation,
soit d’un interrupteur installé sur le circuit électrique fixe, conformément
aux normes électriques.
• Si le câble dalimentation est endommagé, il doit être remplacé par un
câble ou un faisceau de câbles scial disponible aups du fabricant ou
du service après-vente.
Le câble d’alimentation requis est le H05V2V2-F.
Cette opération doit être exécutée par le personnel qualifié. Le
FR 17
conducteur de mise à la terre (jaune et vert) doit être environ 10 mm plus
long que les autres conducteurs. Pour toutes parations, contactez le
service après-vente en insistant sur l’utilisation de pièces de rechange
d’origine.
• Le non-respect des consignes ci-dessus peut compromettre la sécurité
de l’appareil et annuler la garantie.
Éliminez les éclaboussures importantes avant de procéder au
nettoyage.
• Une coupure de courant prolongée durant une phase de cuisson peut
engendrer un dysfonctionnement de l’écran. Dans ce cas, veuillez
contacter le service après-vente.
• Lappareil ne doit pas être installé derrière une porte décorative, pour
éviter la surchauffe.
Pour introduire la grille dans le four, vérifiez que le butoir est dirigé vers
le haut et au fond de la cavi. La grille doit être complètement ine
dans la cavité.
AVERTISSEMENT : Ne recouvrez pas les parois du four avec du papier
aluminium ou une protection jetable disponible dans les magasins. Le
papier d’aluminium ou toute autre protection, en contact direct avec
l’émail chaud, risque de fondre et de détériorer l’émail de la cavité
intérieure.
AVERTISSEMENT : N’enlevez jamais le joint de la porte du four.
PRUDENCE : Ne remplissez pas le fond de la cavité avec de leau pendant
la cuisson ou lorsque le four est chaud.
Aucune autre oration ni aucun autre réglage ne sont requis pour faire
fonctionner l’appareil aux fréquences nominales.
Instructions Générales
19
1.1 Indications de sécurité
1.2 Sécurité électrique
1.3 Recommandations
1.4 Installation
1.5 La gestion des déchets et la
protection de l'environnement
1.6 Déclaration de conformité
2.1 Vue d'ensemble
2.2 Accessoires
2.3 Première utilisation
Description du produit
21
3.1 Description de l'affichage
3.2 Reglage de l'heure
3.3 Mode de cuisson
Utilisation du Four
22
4.1 Remarques générales concernant
le nettoyage
4.2 Entretien
• Retrait et nettoyage des grilles
• Retrait de la porte du four
• Retrait et nettoyage des vitres
• Remplacement de l'ampoule
Nettoyage du four et
maintenance
25
5.1 F.A.Q.
Dépannage
27
SOMMAIRE
FR 18
1. Instructions générales
Nous vous remercions d'avoir choisi un de nos produits. Pour
obtenir les meilleurs résultats avec votre four, vous devez lire
attentivement ce manuel et le conserver pour toute
consultation ultérieure. Avant d'installer le four, notez le
numéro de série, il vous sera demandé par le support
technique si des réparations sont nécessaires. Après avoir
enlevé le four de son emballage, vérifiez qu'il n'a pas été
endommagé pendant le transport. Si vous avez des doutes,
ne pas utiliser le four et se référer à un technicien qualifié
pour obtenir des conseils. Conservez tous les matériaux
d'emballage (sacs en plastique, polystyrène, clous) hors de la
portée des enfants.Lors de la première utilisation du four, il
peut se produire un dégagement de fumée âcre provoqué par le premier échauffement de la colle des
panneaux d’isolation enveloppant le four. Ce phénomène est normal. Attendez que la fumée cesse avant de
cuire des aliments. Le fabricant décline toute responsabilité dans les cas les instructions contenues dans le
présent document ne sont pas respectées.
REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier selon
les modèles.
1.1 Indications de sécurité
Utilisez uniquement le four à sa destination, qui est seulement pour la cuisson des aliments; toute autre
utilisation, par exemple comme une source de chaleur, est considérée comme impropre et donc . dangereuse
Le fabricant ne peut être tenu responsable de tout dommage lié à une mauvaise utilisation ou a des
modifications techniques du produit.
L'utilisation de tout appareil électrique implique le respect de certaines règles fondamentales:
- Ne pas tirer sur le fil électrique pour débrancher la prise.
- Ne pas toucher l'appareil avec les mains ou les pieds mouillés ou humides;
- En général l'utilisation d'adaptateurs, de prises multiples et de rallonges est déconseillé;
- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y toucher.
1.2 Sécurité électrique
LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN TECHNICIEN DE
QUALIFICATION SIMILAIRE.
L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le pays
d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non respect de ces
instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale reliée à la terre ou par
l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur dans le pays d'installation.
L'alimentation électrique doit être protégée par des fusibles appropriés et les câbles utilisés doivent avoir une
section transversale qui peut assurer une alimentation normale du four.
CONNEXION
Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique de 220-
240 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir vérifié:
- La tension d'alimentation indiquée sur le compteur;
- Le réglage du disjoncteur.
Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne Terre de
l’installation.
ATTENTION
Faire vérifier la continuité de la terre de l’installation avant de procéder au raccordement. Le fabricant décline
toute responsabilité en cas d'accidents ou d'autres problèmes qui pourraient survenir à l'usage d'un appareil
non relié à la terre, ou relié à une terre dont la continuité serait défectueuse.
REMARQUE: Le four peut nécessiter une opération de S.A.V. Aussi, placez la prise de courant de façon à
pouvoir brancher le four une fois sorti de sa niche. Câble d'alimentation: si le changement du câble
d'alimentation s'avère nécessaire, nous vous demandons de faire réaliser cette opération par le service après-
vente ou une personne de qualification similaire. Une lumière faible autour de l'interrupteur central principal
peut être présente lorsque le four est éteint. C'est un comportement normal. Il peut être éliminée en
retournant la prise ou en intervertissant les bornes d'alimentation.
FR 19
1.3 Recommandations
Après chaque utilisation du four, réaliser un petit entretien qui favorisera le nettoyage parfait du four. Ne pas
tapisser les parois du four avec des feuilles en aluminium ou des protections jetables du commerce. La feuille
d'aluminium ou toute autre protection, en contact direct avec l'émail chauffé, risque de fondre et de
détériorer l'émail du moufle. Avant installation de l'appareil, il faut relever le numéro de série et le noter ci-
dessous en cas d'éventuelle demande d'intervention.
Afin d'éviter les salissures excessives de votre four ainsi que les fortes odeurs de fumée pouvant en résulter,
nous recommandons de ne pas utiliser le four à trop forte température. Il est préférable de
rallonger le temps de cuisson et de baisser la température. Nous vous conseillons de n'utiliser que des plats,
des moules à pâtisserie résistants à de très hautes températures.
1.4 Installation
La mise en service de l’appareil est à la charge de l’acheteur, le constructeur est dégagé de ce service. Les
pannes liées à une mauvaise installation ne seront pas couvertes par la garantie. Une mauvaise installation
peut provoquer des dommages aux personnes, aux animaux domestiques; dans ce cas la responsabilité du
constructeur ne peut être engagée. L'installation du four doit être réalisée par un installateur agréé ou un
technicien de qualification similaire. Le four peut être placé en hauteur dans une colonne ou enchâssé sous
un plan de travail. Avant sa fixation: il est indispensable d'assurer une bonne aération dans la niche
d'encastrement afin de permettre la bonne circulation de l'air frais nécessaire au refroidissement et à la
protection des organes intérieurs. Pour cela, réaliser les ouvertures spécifiées selon le type d'encastrement
(dernière page).
1.5 La gestion des déchets et la protection de l'environnement
Le présent appareil est marqué conformément à la directive 2012/19/UE relative aux déchets
d'équipements électriques et électroniques
(DEEE). Les DEEE contiennent à la fois des substances polluantes (qui peuvent avoir des
conséquences négatives sur l'environnement) et des éléments de base (réutilisables). Il est
important de soumettre les DEEE à des traitements spécifiques, en vue d'extraire et d'éliminer
de façon appropriée toutes les substances polluantes, puis de récupérer et recycler tous les
matériaux.
Chacun peut jouer un rôle important quant à la protection de l'environnement contre les DEEE. Pour atteindre
cet objectif, il est impératif de suivre quelques règles élémentaires :
Les DEEE ne doivent pas être traités comme des déchets ménagers.
Ils doivent être remis aux points de collecte appropriés gérés par la municipalité ou par des sociétés
immatriculées. Dans plusieurs pays, il est possible de collecter à domicile les DEEE volumineux.
Lorsque vous achetez un nouvel appareil, vous devez retourner l'ancien au vendeur qui le récupère
gratuitement, au cas par cas, à condition que l'équipement soit de type équivalent et possède les mêmes
fonctions que celui fourni.
ÉCONOMIE ET RESPECT DE L'ENVIRONNEMENT
Lorsque cela est possible, éviter le préchauffage du four et éviter de le faire tourner à vide. N'ouvrez la porte
du four que lorsque cela est nécessaire, car il y a des déperditions de chaleur à chaque fois qu'il est ouvert.
Pour une économie d'énergie significative, éteindre le four entre 5 et 10 minutes avant la fin de cuisson
prévue, et utiliser la chaleur que le four continue de générer. Gardez les joints propres et en bon état, pour
éviter toute déperdition d'énergie. Si vous avez un contrat électrique avec un tarif heure creuse, le
programme "cuisson différée" peut vous faire réaliser des économies d'énergie en déplaçant le début du
programme à un intervalle de temps à tarif réduit.
FR 20
1.6 Declaration De Conformité
En plaçant la marque sur ce produit, nous confirmons la conformité à toutes les exigences
européennes concernant la protection de l’environnement et de la santé, ainsi que la sécurité,
applicables selon la loi à ce produit.
1 / 1

Candy FCD545N Manuel utilisateur

Catégorie
Fours
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues