Magnasonic EAAC601W Manuel utilisateur

Marque: Magnasonic

Modèle: EAAC601W

Catégorie: Réveils

Taper: Manuel utilisateur

User Manual

Guide de l’utilisateur

SelfSet

™

Clock Radio with Dual Alarm

Radio- réveil SelfSet

™

avec double alarme

EAAC601/ EAAC601W

magnasonic.com/support

Thank you for your purchase of this Magnasonic product. Please read this instruction manual carefully before

using product to ensure proper use. Keep this manual in a safe place for future reference.

Merci d’avoir fait l’achat de cet appareil Magnasonic. Veuillez lire le présent guide attentivement avant de

faire fonctionner l’appareil pour vous assurer de l’utiliser correctement. Conservez le présent guide dans un

endroit sûr an de pouvoir vous y référer au besoin.

IMPORTANT SAFETY INFORMATION

RETAIN THIS MANUAL FOR FUTURE REFERENCE

1. Read these instructions.

2. Keep these instructions.

3. Read all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6. Clean only with a dry cloth.

7. Clean the screen only with a dry cloth, moistened slightly if needed. Do not clean the inside of this

product.

8. Check that the power voltage stated on the rating label corresponds to your local electricity supply.

9. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

10. Do not place this product near any heat sources such as radiators, heat registers, stoves or other

apparatus (including ampliers) that produce heat.

11. Do not immerse this product, the power cord or any accessories in water or any other liquid.

12. Unplug the power adaptor from the wall when the product is unused for a long period of time and

during thunderstorms.

13. Only use attachments / accessories specied by the manufacturer.

14. Unwind and straighten the power cord before use.

15. Damage Requiring Service

Unplug the power cord and refer servicing to qualied service professional under the following

conditions:

A. If liquid has been spilled on or into the product.

B. If the product has been exposed to rain, water, or other liquids.

C. If the product does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions. Improper adjustment of other

controls may result in damage and will often require extensive work by a qualied technician to

restore the product to its normal operation.

D. If the product has been dropped or damaged in any way.

E. When the product exhibits a distinct change in performance. This may indicate a need for service.

16. Servicing

Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltages or other hazards. Refer all servicing to a qualied service professional.

17. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts

specied by the manufacturer, or have the same characteristics as the original parts. Unauthorized

substitutions may result in re, electric shock, or other hazards.

18. Safety Check

Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

19. Caution marking is located at the back of apparatus.

20. The marking information is located on the bottom of apparatus.

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION ...................................................2

PRODUCT INFORMATION .......................................................................4

OPERATING INSTRUCTIONS ..................................................................6

Connecting Power .........................................................................................................6

Setting Alarm 1 & Alarm 2...........................................................................................6

Setting the Date & Time ...............................................................................................8

Daylight Saving Time (DST) / Summer Time ..........................................................8

Canceling / Reactivating Automatic DST / Summer Time ..................................8

Battery Backup ................................................................................................................9

Installing the Battery .....................................................................................................9

Snooze Function ......................................................................................................... 10

Sleep Timer ................................................................................................................... 10

Nap Timer ..................................................................................................................... 10

Dimmer .......................................................................................................................... 10

Temperature Settings ..................................................................................................11

Listening to the Radio .................................................................................................11

To Set the Radio Presets ............................................................................................11

To Recall the Radio Presets.......................................................................................12

Projection Unit .............................................................................................................12

AUX In ............................................................................................................................12

MAGNASONIC

WARRANTY ................................................................13

TROUBLESHOOTING ..............................................................................15

SPECIFICATIONS ......................................................................................15

CARE AND MAINTENANCE ...................................................................16

WARNINGS ................................................................................................. 17

NAP / SIESTE°C / °FDST / HA

14 15 16 17

TIME ZONE / FUS HOR

DIMMER / GRADATEUR AM / FMMEM / M+

SET /

RÉGL

SNOOZE / SLEEP

MIN SOM / SOMNO

18 19 20 21

1 2

7 8

PRODUCT INFORMATION

1. Month Indicator

2. Daylight Savings Time ‘on’ Indicator

3. Year Indicator

4. PM Indicator

5. Time Zone Selection ‘on’ Indicator

6. FM/AM Band Indicator

7. Alarm Indicators:

Alarm 1 Radio / Alarm 1 Buzzer /

Alarm 2 Radio / Alarm 2 Buzzer

8. Sleep Mode ‘on’ Indicator

9. Day of the Week Indicator

10. Date Indicator

11. Time / Main Function Indicator

12. Indoor Temperature Display

13. LCD Screen

14. << / Daylight Savings Time

15. >> / ºC-ºF

16. Volume Down / Nap

17. Volume Up / Calendar

18. Projection Unit

19. Set / Memory

20. Time Zone / Snooze / Sleep / Dimmer

21. Radio ON/OFF / AM/FM Band

22. Alarm 1

23. Alarm 2

24. AUX Input

25. Speaker

26. FM Antenna

27. Indoor Temperature Sensor

28. Battery Door

29. Projection Focus

30. Projection 180º Flip / Projection

Temperature ON/OFF

31. Projection ON/OFF

AUX

2827

Connecting Power

The SelfSet

™

Clock Radio is equipped with an “auto time set” feature. When

power is connected, the clock display will ash ‘2’ which is TIME ZONE 2

(Eastern time) and the default TIME ZONE setting.

To select TIME ZONE 2 (Eastern time) as your default time zone:

• Press ONCE to conrm your selection.

• The correct time will be displayed, unless you are in another time zone.

To change your time zone upon setup:

• Press or until your own time zone appears on the display; press

ONCE to conrm your selection.

To change your time zone after setup:

• With the radio off, press and hold the button until the time

zone numbers ash.

• Press or until your own time zone appears on the display; press

ONCE to conrm your selection.

There are 8 programmed times zones:

OPERATING INSTRUCTIONS

0 - Newfoundland time

1 - Atlantic time

2 - Eastern time (default)

3 - Central time

4 - Mountain time

5 - Pacic time

6 - Alaska time

7 - Hawaiian time

Setting Alarm 1 & Alarm 2

Press the ALARM 1 or ALARM 2 button once to view the current alarm

setting and then press and hold to enter the alarm set mode. The alarm time will

ash, and the settings will appear in the following order:

HOUR > MIN > ALARM MODES > WAKE OPTIONS > RADIO VOLUME (if applicable)

1. Press the or buttons to decrease/increase the HOUR; press the

or button to conrm HOUR. The MINUTES will begin to ash.

2. Press the or buttons to decrease/increase the MINUTES; press the

or button to conrm MINUTES. Alarm modes will ash.

1=Monday

2=Tuesday

3=Wednesday

4=Thursday

NOTE: When selecting 1-1, you must select a specic day as follows:

5=Friday

6=Saturday

7=Sunday

3. Press the or buttons to toggle between the ALARM MODE settings

then press the or button to conrm your selection; if 1-1 is selected,

press the or buttons to toggle between the days of the week and

press the or button to conrm your selection. The Wake options

will begin to ash.

4. Press the or buttons to toggle between the Wake options AM, FM

or bu (buzzer); press the or button to conrm your selection; if AM

or FM is selected, the Alarm Volume selection will begin to ash.

5. Press the or buttons to decrease/increase the Alarm Volume; press

the or button to conrm your selection.

Alarm modes allow you to set more than one alarm in a week e.g.,

ALARM 1 set to wake you Monday-Friday and ALARM 2 set to wake you

on weekends.

Alarm mode settings:

1-5 : Monday to Friday

1-7 : Whole week

6-7 : Saturday & Sunday

1-1 : One day of week

• Press and hold the or buttons to quickly decrease/increase

through settings.

• To cancel an alarm while it is going off, press the button.

• If an alarm is not cancelled, it will sound for 30 minutes then automati-

cally turn off. It will resume to the same alarm time on next scheduled

day.

• To enable/disable an alarm, press and hold the

or button. An icon

will appear on screen to indicate that an alarm is enabled.

Setting the Date & Time

To change the Date/Time, press and hold the button. The settings will

appear in the following order:

YEAR > MONTH > DAY > 12/24 H > HOUR > MIN

1. Press the or buttons to toggle through the settings

2. To conrm your selection, press the button once again.

Daylight Saving Time (DST) / Summer Time

Daylight Saving Time/Summer Time is automatically preset. An icon will appear

on screen to indicate DST is on

• Daylight saving time begins at: 2:00 AM on the second Sunday of March.

• Standard time begins at: 2:00 AM on the rst Sunday of November.

Canceling / Reactivating Automatic DST / Summer Time

1. To cancel DST/Summer Time, press and hold the button for 3 sec-

onds while the radio is OFF.

2. ‘OFF’ will appear in the display to show that the Automatic DST/Summer

Time adjustment is canceled. The display will return to the clock.

3. To reactivate DST/Summer Time, press and hold the button for 3

seconds while the radio is OFF.

4. ‘ON’ will appear in the display to show that the Automatic DST/Summer

Time adjustment is reactivated. The display will return to the clock.

• The timing of Automatic DST/Summer Time employed by the unit

(see above) is subjected to variations by region and the law in each

country/region. In such a case, cancel the Automatic DST/Summer

Time adjustment.

• If you live in a country/region that has not introduced Daylight Saving

Time/Summer Time, you must cancel Automatic DST/Summer Time

adjustment before using the unit.

Battery Backup

This alarm clock is equipped with a battery backup feature. This feature will re-

store your alarm clock settings in the event of a power outage. The 3V, CR2032

Flat Lithium battery is pre-installed at the factory, however, should you need to

replace the battery, please read the following instructions.

Installing the Battery

1. Using a small Phillips Head screwdriver, loosen the screw from the battery

panel on the bottom of the unit.

2. Remove the battery compartment panel.

3. Remove/properly dispose of depleted battery and replace with new, 3V,

CR2032 Flat Lithium battery.

4. Close the battery compartment and put screw into place to secure battery panel.

ATTENTION

• When replacing the battery, do not disconnect AC plug from AC outlet.

Current time and alarm will stay the same.

• Do not plug or unplug the power cable if you have wet hands.

• If you are not planning to use the unit for an extended period of time,

disconnect the power cable from the wall outlet.

• Do not pull on the cord! You may damage the power cord and may cause

an electric shock when disconnecting the power cord from the wall outlet.

Pull rmly at the base of the plug.

• Batteries must be installed by an adult.

• Use only the recommended size and type of battery specied.

• Please be sure to follow the correct polarity when installing the

battery in the battery compartment. A reversed battery may cause

damage to the alarm clock.

• When not using the unit for a prolonged period of time, please remove

the battery to avoid possible damage caused by a leaking battery.

Snooze Function

• When an alarm is sounding, press the button to stop the

alarm for 9 minutes. Alarm will resume after 9 minutes.

• Pressing the button on the top of the unit will cancel the snooze func-

tion; Snooze function will also stop automatically after 30 minutes.

Sleep Timer

The sleep timer allows you to listen to music for a preset amount of time rang-

ing from 90 minutes to 15 minutes. It is commonly used by people who prefer to

fall asleep to music.

1. Press the button to turn the radio on.

2. Press the button to toggle through the preset times:

90min > 60min > 30min > 15min > OFF

3. To cancel the sleep timer, press the button until you see

‘OFF’ in the display or press the button.

Nap Timer

The nap timer allows you to set a buzzer alarm to go off after a preset amount

of time ranging from 90 minutes to 10 minutes.

1. With radio off, press the button to turn on the nap timer.

2. Press the button to toggle through the preset times;

90min > 80min > 70min > 60min > 50min > 40min > 30min > 20min >

10min > OFF

3. When enabled, pressing the button will show current nap timer

and pressing again will reset the timer to 90 minutes.

4. When the nap timer expires, it will continue to buzz for 30 minutes or it

can be stopped by pressing the button.

5. To cancel the nap timer, press the button until you see ‘OFF’ in

the display.

Dimmer

You can adjust the brightness of the LCD display making it brighter, dimmer or

even turning it off. There are three dimming options: High > Low > OFF.

1. With the radio off, press the button to toggle between

the dimmer settings.

Temperature Settings

The temperature can be displayed in °C or °F.

• With the radio off, press and hold the button to switch between

°C or °F modes.

Listening to the Radio

1. Press the button on the top panel to turn the radio ‘ON’.

2. Press and hold the button while the radio is ON to toggle between

AM and FM radio.

3. Press the or buttons once, to move back/move forward one station

at a time.

4. Press and hold the or buttons for one second to scan back/forward

through the stations; the unit will automatically scan to the next broadcast-

ing station.

5. Control the radio volume with the or buttons.

6. Press the button to turn the radio ‘OFF’.

Please ensure that the FM antenna is completely unrolled and extended for

best FM reception. The AM band uses an internal directional aerial. For best

reception, please rotate the radio.

To Set the Radio Presets

1. Press the button on the front panel to turn the radio ‘ON’.

2. Press and hold the button while the radio is ON to toggle between

AM and FM radio.

3. Use the or buttons to select the desired radio station.

4. To set a radio present, press and hold the button. A preset number

will blink on the display e.g., ‘P02’.

5. Use the or buttons to toggle to the desired preset number.

6. Press the button again to set the preset.

7. Repeat steps 2 through 6 to set more presets.

To Recall the Radio Presets

1. Press the button on the front panel to turn the radio ‘ON’.

2. Press the button to select a preset. The current preset number will

appear on the display. Press the button again to cycle through all radio

presets.

There are 20 available presets.

10 for AM radio (P01 to P10) and 10 for FM radio (P01 to P10)

Projection Unit

The Projection Unit will project the Time or the Temperature on a wall or

ceiling of a darkened room (maximum distance is 3-9 feet).

• To turn the projected image ON/OFF, press the button.

• Turn the Focus Adjustment Wheel ( on the back of the projection

unit) until the projected time/temperature is clearly shown on the ceiling

or wall.

• To display the temperature, press and hold the button on the back of the

projection unit.

• To ip the projected image (temperature or time) 180°, press the

button once.

AUX In

This clock radio is equipped with a convenient auxiliary input that allows you to

use your clock radio as a speaker for another audio device.

1. Connect a 3.5mm cable (not included) into the connection on the back

of the clock radio and connect the other end of the cable to the audio out

connection of your external audio device.

2. Any device connected through the auxiliary input will override the radio

function when the radio is on.

3. Operate the external audio device as you normally would. You can control

the volume with the clock radio or buttons.

MAGNASONIC

WARRANTY

WARRANTY INFORMATION

Thank you for choosing Magnasonic! We guarantee your investment in our products is a solid one. Our products

come with a complete one-year parts and labor warranty. High performance components combined with quality

craftsmanship allow us to maintain the highest possible production standards. All items are guaranteed against

defects in materials and craftsmanship. Magnasonic has outstanding quality control; if something should go wrong

with any of our products, we will repair it free of charge within the warranty period. If the product cannot

be repaired, we will replace the product. In the event that Magnasonic replaces a product under warranty, the

replacement would only carry the original warranty from the original date of purchase.

Warranty Exclusions

Magnasonic products are warrantied for parts and labor for one year from date of original purchase, and are

subject to the terms and conditions of the warranty. Magnasonic warranties are valid for the original owner and

are non-transferable.

• Any defects caused or repairs required as a result of abusive operation, negligence, accident,

improper installation or inappropriate use as outlined in the owner’s manual.

• Any Magnasonic product tampered with, modied, adjusted, or repaired by any party other than

Magnasonic.

• Any cosmetic damage to the surface or exterior that has been defaced or caused by normal

wear and tear.

• Any damage caused by external or environmental conditions, including but not limited to, trans-

mission line/power line voltage or liquid spillage.

• Any product received without an appropriate model and serial number.

• Any products used for rental or commercial purposes.

• Any installation, set up and/or programming charges.

To Obtain Warranty Service

Should your product require warranty service, please contact us at www.magnasonic.com/contact or call us

at 1-855-768-3589 to set up a Return Authorization. Products returned without a valid Return Authorization

number will be refused.

Magnasonic products must be returned in their original packaging. Our products are packaged specially to protect

them from any damage during shipping, and without this packaging the return shipment could get damaged.

This warranty does not cover the shipping cost, insurance, or any other incidental charges. Products shipped for

warranty service must be pre-paid by the customer, and Magnasonic will cover the cost to ship the repaired or

replaced product back to the customer.

DO NOT RETURN THIS

PRODUCT TO THE STORE

NEED

HELP?

Please contact a Magnasonic customer support representative rst re-

garding any additional information on product features, specications

or assistance with setup.

Please contact us via one of the methods below:

For more product information visit Magnasonic.com

Support:

Magnasonic.com/support

Online Web Chat:

Magnasonic.com

TROUBLESHOOTING

If you experience a problem with this unit, check the chart below before calling

for service.

SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION

GENERAL

Power does not come on AC cord not plugged in Insert plug rmly into AC outlet

RADIO

No sound

Power is not on

Press power to turn the radio

Volume control is at the mini-

mum position

Turn the volume control up

Noise or sound is distorted on

AM or FM radio

AM: Interference

Position the radio for better AM

reception

FM: Antenna wire not extended Extend antenna wire

CLOCK

Incorrect time

Batteries inserted incorrectly,

not connected or dead

Check batteries

Clock not set Set the clock

Alarm does not turn on

Alarm is not set to turn on

Press and hold ALARM 1 or

ALARM 2 to turn on the alarm

Clock is not set Set the clock

Alarm time is not set Set alarm time

SPECIFICATIONS

Frequency Range (AM) 520 - 1710 kHz

Frequency Range (FM) 87.5 - 108 MHz

Power Supply AC 120V ~ 60Hz, 5W

Battery Backup DC 3V CR2032 (battery included)

Indoor Temperature Range 0 to +50°C or 32 to 122 °F

Specications are subject to change without notice.

CARE AND MAINTENANCE

PRECAUTIONS:

1. Always turn off the unit after use.

2. Keep the unit away from magnetic objects, water or heat sources.

3. Use a clean soft cloth moistened with lukewarm water to clean the cabi-

net. Never use chemical cleaners that could damage the nish of the unit.

4. Disconnect the unit from any power sources before cleaning.

NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

WARNING

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD

This product contains a coin/button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children. If the battery compartment

does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the

body, seek immediate medical attention.

WARNINGS

WARNING

To reduce the risk of re or electric shock, do not expose this appliance to rain or

moisture.

CAUTION

Use of controls or adjustments or performance of procedures other than those

specied may result in hazardous radiation exposure.

CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE,

REFER TO QUALIFIED USER PERSONNEL.

The lightning ash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufcient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

ATTENTION

DO NOT OPEN

1. No naked ame sources, such as lighted candles, should be placed on the apparatus.

2. Do not place the product in closed bookcases or racks without proper ventilation.

3. The mains plug is used as the disconnect device, the disconnect device shall remain readily

operable.

4. The ventilation should not be impeded by covering the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

5. It shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases,

shall be placed on the apparatus.

6. Do not connect FM antenna to outside antenna.

7. The unit should not be exposed to direct sunlight, very high or low temperature, moisture, vibra-

tions or placed in dusty environment.

8. Do not use abrasive, benzene, thinner or other solvents to clean the surface of the unit. To clean,

wipe it with mild non-abrasive detergent solution and clean soft cloth.

9. Never attempt to insert wires, pins or other such objects into the vents or opening of the unit.

10. Batteries shall not be exposed to excessive heat such as sunshine, re or the like.

11. Attention should be drawn to the environmental aspects of battery disposal.

Do not dispose this product into usual household garbage at the end of its lifecycle; hand it

over to a collection center for recycling the electrical and electronic appliances. By recycling,

some of the materials can be reused. You are making an important contribution to protect our

environment. Please inquire your community administration for the authorized disposal center.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING

To prevent electric shock; do not use this plug with an extension cord receptacle or other outlet unless

the blades can be fully inserted to prevent blade exposures. To prevent re or shock hazard; do not install

this product in a conned spaced such as a book case or similar unit.

NOTES

La page charge ...

Magnasonic EAAC601W Manuel utilisateur

Marque: Magnasonic

Modèle: EAAC601W

Catégorie: Réveils

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Magnasonic EAAC601W User manual

Magnasonic EAAC601W Manuel utilisateur

Magnasonic EAAC601W Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents