Winmate M101B Series Manuel utilisateur

Please read this instructions carefully before using this product, and save this manual for future use.

M101B, M101BL

Rugged Windows Tablet

Intel® Celeron® Quad Core N2930, 1.83 GHz

Windows 10 IoT Enterprise

Windows Embedded 8.1 Industry Pro

Windows 7 Pro for Embedded Systems

User Guide

Version 1.6

Document Part No. 9171111K101X

1

Rugged Windows Tablet M101B/ M101BL User Guide

Contents

CHAPTER 1: READ ME FIRST 3

1.1 ADVISORY CONVENTIONS 3

1.2 SAFETY INFORMATION 4

1.3 HANDLING AND MAINTENANCE 6

1.4 DECLARATION OF CONFORMITY (DOC) 7

CHAPTER 2: GETTING STARTED 8

2.1 UNPACKING 8

2.2 DESCRIPTION OF PARTS 10

2.3 HOTKEY FOR SPECIFIC FUNCTIONS 12

2.4 FIRST-TIME OPERATION 12

2.4.1 Installing SIM Card (For 3G/LTE Equipped Devices) 13

2.4.1 Inserting Battery Pack 14

2.4.2 Connecting to Power Supply 14

2.5 POWERING ON / OFF 16

2.5.1 Powering On 16

2.5.2 Powering Off 16

CHAPTER 3: SETTING UP WINDOWS FOR THE FIRST TIME 17

3.1 SETTING UP WINDOWS EMBEDDED STANDARD 7 (WS7P) 17

3.1.1 Creating a user name and password 17

3.1.2 License Agreement 17

3.1.3 Protecting your computer 17

3.1.4 Choosing your computer's network 19

3.1.5 Completing Windows 7 Setup 19

3.2 SETTING UP WINDOWS 7 ULTIMATE/PROFESSIONAL 20

3.3 SETTING UP WINDOWS EMBEDDED 8 STANDARD 24

3.4 SETTING UP WINDOWS EMBEDDED 8.1 INDUSTRY PRO 29

3.5 SETTING UP WINDOWS 10 IOT ENTERPRISE 33

CHAPTER 4: OPERATING THE DEVICE 36

4.1 HOTTAB INTRODUCTION 36

4.2 SHORTCUTS 37

4.3 CAMERA 38

4.4 DEVICE ON/OFF 40

4.4.1 Using Wireless LAN (Wi-Fi) 40

4.4.2 Using Wireless WAN (3G/LTE) 41

4.4.3 Using GPS 41

4.4.4 Using Bluetooth 42

4.4.5 Turn on/off LED Indicators 42

4.4.6 Using Barcode Reader 43

4.4.7 Using HF RFID Reader 49

4.4.8 Turn on/off GPS External Antenna 54

4.4.9 Turn on/off Light Sensor 55

4.4.10 Changing Touchscreen Modes 55

4.4.11 Using Expansion Module 58

4.4.12 UHF RFID Reader Module 59

4.5 SETTINGS 65

4.5.1 PC Information 65

4.5.2 Battery Information 65

4.5.3 Using the Physical Function Keys (Hotkeys) 66

CHAPTER 5: FREQUENTLY USED SETTINGS 67

5.1 SCREEN RESOLUTION SCALING AND SETTING 67

5.1.1 Changing display scaling setting (Recommended) 67

5.1.2 Changing screen resolution setting 69

2

Chapter 1: Read Me First

5.2 REPLACING HOT SWAPPABLE BATTERY (FOR M101B) 71

5.3 USING RECOVERY WIZARD TO RESTORE COMPUTER 72

5.4 HOW TO CHANGE OS 74

5.4.1 Changing BIOS Settings (UEFI/LEGACY mode) to Install OS 74

5.5 DOCKING CONNECTOR PIN DEFINITION 79

5.6 EXPANSION PORT PIN DEFINITION 79

5.7 COM PORT DEFINITION 80

5.8 PAIRING WITH A WIRELESS BLUETOOTH BARCODE SCANNER WITH BLUETOOTH SERIAL PORT PROFILE 82

5.8.1 Setup Computer for Bluetooth Pairing 82

5.8.2 Set up the Barcode Scanner for Bluetooth Pairing 85

5.8.3 Perform Bluetooth Pairing 85

CHAPTER 6: TROUBLESHOOTING 88

6.1 BASIC TROUBLESHOOTING 88

APPENDIX A: ORDER INFORMATION 90

3

M101P Rugged Tablet User Guide

Chapter 1: Read Me First

1.1 Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to alert you

to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and

Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Unealerted’attentionindique un dommage possible à l’équipement et explique comment

éviter le problèmepotentiel.

Warning! Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards and how

to avoid the potential problem.

Un Avertissement de Choc Électriqueindique le potentiel de chocssur des emplacements

électriques et comment évitercesproblèmes.

4

Chapter 1: Read Me First

1.2 Safety Information

Precaution on Battery Pack

Précaution avec le bloc-pile

Do Not Disassemble, Modify, or Insert Sharp

Objects Into the Battery Pack. Electrolyte

leakage, generation of heat, ignition or rupture

may result.

[FR] Ne pas démonter, modifier, ou insérer

des objets pointus à l'intérieur du bloc-pile.

Une fuite d'électrolyte, la génération de

chaleur, l'amorçage ou la rupture peuvent être

occasionnés.

Do Not Short the Positive (+) and Negative (-)

Terminals of the Battery. Generation of heat,

ignition or rupture may result. When carrying

or storing the device, do not place the battery

pack together with articles that may contact

electricity.

[FR] Ne pas court-circuiter les bornes Positive

(+) et Négative (-) de la pile, la génération de

chaleur, l'amorçage ou la rupture peuvent être

occasionnés. Lors du transport et du

rangement de l'appareil, ne pas placer le bloc-

pile en même temps que des articles pouvant

créer un contact électrique.

Do Not Apply Shocks to the Battery by

Dropping It or Applying Strong Pressure to It.

Electrolyte leakage, generation of heat, ignition

or rupture of battery may occurs.

[FR] Ne pas faire subir de choc à la pile en la

laissant tomber ou en appliquant une forte

pression dessus. Une fuite d'électrolyte, la

génération de chaleur, l'amorçage ou la

rupture peuvent être occasionnés.

Do Not Charge the Battery Other Than

Methods Those Specified In This Manual. If

the battery is not charged using one of the

specified methods, electrolyte leakage,

generation of heat, ignition or rupture may

result.

[FR] Ne pas charger la pile par d'autres

méthodes que celles spécifiées dans ce

manuel. Si la pile n'est pas chargée en utilisant

l'une des méthodes spécifiées, une fuite

d'électrolyte, la génération de chaleur,

l'amorçage ou la rupture peuvent être

occasionnés.

When the Battery Pack Has Deteriorated,

Replace It with a New Battery. Continued use

of a damaged battery pack may result in heat

generation, ignition or battery rupture.

[FR] Lorsque la pile est détériorée, la

remplacer par une nouvelle pile. L'utilisation

continue d'une pile endommagée peut

occasionner une génération de chaleur,

l'amorçage ou la rupture de la pile.

Do Not Expose the Battery Pack to Excessive

Heat, or Extreme Heat (Near Fire, in Direct

Sunlight for example) Generation of heat,

ignition or rupture may result

[FR] Ne pas exposer le bloc-pile à une Chaleur

Excessive, ou une Chaleur Extrême (Près d'un

feu, sous la lumière du soleil par exemple)Une

production de chaleur, l'amorçage ou la

rupture peuvent être occasionnés

Do Not Use the Battery Pack With Any Other

Products. The battery pack is rechargeable

and is only designed for this specific product. If

it is used with a product other than the

specified product, electrolyte leakage,

generation of heat, ignition or rupture may

result.

[FR] Ne pas utiliser avec un autre produit La

batterie est rechargeable et a été conçue pour

un produit spécifique. Si elle est utilisée sur un

produit différent

de celui pour lequel elle a été conçue, des

pertes d’électrolytes et une production de

chaleur sont possibles, elle risque également

de prendre feu ou de casser.

Do Not Use This Product With Battery Other

Than the One Specified.

[FR] Ne pas utiliser ce produit avec une

batterie autre que celle spécifiée

Discontinue using device immediately if you

notice the battery is swelling, or looks puffy or

misshapen. Do not attempt to charge or use

the device. Do not handle a damaged or

leaking battery. Do not let leaking battery fluid

come into contact with your eyes, skin or

clothing.

[FR] Si vous remarquez une pile gonflée,

élargie ou anormale, cesser l’utilisation de

l’appareil immédiatement. N’essayez pas de

recharger l’appareil ou de l’utiliser. Ne pas

manipuler une pile qui fuit ou qui est

endommagée. Ne laissez pas de liquide qui

fuit entrer en contact avec vos yeux, votre

peau ou vos vêtements.

5

Rugged Windows Tablet M101B/ M101BL User Guide

General Product Safety

Sécurité générale des

produits

 Do not block any ventilation openings. Do not

place the product against a wall or in an

enclosed space as doing so might impede the

flow of cooling air.

 [FR] Ne pas bloquer les ouvertures de

ventilation. Ne pas placer le produit contre un

mur ou dans un espace clos de façon à

entraver la circulation de l'air de

refroidissement.

 Do not place the product near any heat

sources such as radiators, warm air intakes,

stoves or other heat-generating devices

(including amplifiers or other heat producing

equipment).

 [FR] Ne pas placer le produit près d'une

source de chaleur comme des radiateurs, les

arrivées d'air chaud, poêles ou autres

produits générant de la chaleur (y compris les

amplificateurs ou autre équipement

produisant de la chaleur.)

 Protect the power cord from being crushed or

pinched, particularly in the area of the plugs,

any receptacles used, and the point of exit

from the apparatus. Do not break off the

ground pin of the power cord.

 [FR] Empêcher le cordon d'alimentation d'être

écrasé ou pincé, en particulier dans les zones

de prises, des containers utilisés, et du point

de sortie de l'appareil. Ne pas casser la

broche de terre du cordon d'alimentation.

 Do not disregard the safety that a polarized or

grounded connection can provide. A

polarized connection consists of two plugs,

one of which is larger than the other. A

grounded connection has two blades and a

third one that is grounded. If the main plug

provided cannot be inserted into your outlet,

consult an electrician to replace your obsolete

outlet.

 [FR] Ne pas ignorer la sécurité qu'une prise

polarisée ou une prise de terre peut prévoir.

Une prise polarisée se compose de deux

fiches, dont l'une est plus large que l'autre.

Une prise de terre possède deux lames et

une troisième qui est la terre. Si la fiche

principale fournie ne peut être insérée dans

votre prise, consultez un électricien pour

remplacer votre prise obsolète.

 Use only accessories specified by the

manufacturer.

[FR] Utiliser uniquement les accessoires

spécifiés par le fabricant.

 This product should not be used near water

such as bathtubs, sinks, swimming pools, wet

basement, etc.

[FR] Ce produit ne dois pas être utilisé près

de l'eau comme les baignoires, les éviers, les

piscines, les sous-sols humides, etc.

 Use only with its transport carriage, stand,

tripod, console or table specified by the

manufacturer or sold with the product. When

using a carriage, move the carriage assembly

with the product carefully to avoid damage

from falling over.

 [FR] Utiliser uniquement avec son chariot de

transport, support, trépied, console ou table

spécifiés par le fabricant ou vendu avec le

produit. Lors de l'utilisation d'un charriot,

déplacez l'ensemble chariot avec le produit

avec soin pour éviter tout dommage de chute.

 Unplug this apparatus during lightning storms

or when it is not being used for long periods.

 [FR] Débrancher cet appareil durant les

orages ou lorsqu'il n'est pas utilisé pendant

de longues périodes.

 Refer all servicing to qualified service

personnel. A technical intervention is required

when the apparatus has been damaged in

any way, for example if the power cord or

plug is damaged, liquid has been spilled or

objects have fallen inside the unit, if the

product has been exposed to rain or

moisture, if it does not operate normally or if it

has been dropped.

 [FR] Confier toute réparation à du personnel

qualifié. Une intervention technique est

nécessaire lorsque l'appareil a été

endommagé de quelque façon, par exemple

si le cordon d'alimentation ou la fiche est

endommagé, du liquide a été renversé ou

des objets sont tombés à l'intérieur de l'unité,

si le produit a été exposé à la pluie ou à

l'humidité, s'il ne fonctionne pas normalement

ou s'il a été jeté.

6

Chapter 1: Read Me First

1.3 Handling and

Maintenance

General Guideline

Guide Général

Keep the product at least 13 cm (5 inches)

away from electrical appliances that can

generate a strong magnetic field such as TV,

refrigerator, motor, or a large audio speaker.

[FR] Garder le produit au moins à 13 cm (5

pouces) de distance des appareils électriques

qui peuvent générer un fort champ magnétique

comme une télévision, un réfrigérateur, un

moteur, ou un important haut-parleur.

Do not place heavy objects on top of the tablet

computer as this may damage the display.

[FR] Ne pas placer d'objets lourds sur le

dessus de l'ordinateur tablette cela peut

endommager l'écran.

The screen surface can be easily scratched.

Use with care. Do not use paper towels to

clean the display but use the included cleaning

cloth. Avoid touching it with a pen or pencil.

[FR] La surface de l'écran peut être facilement

rayée. Utiliser avec précaution. Ne pas utiliser

de serviette en papier pour nettoyer l'écran

mais utiliser le chiffon de nettoyage inclus.

Éviter de toucher avec un stylo ou un crayon.

To maximize the life of the backlight in the

display, allow backlight to automatically turn off

as a result of power management. Avoid using

a screen saver or other software that prevents

the power management from working.

[FR] Pour maximiser la durée de vie du

rétroéclairage de l'écran, autoriser le

rétroéclairage résultant de la gestion de

l'alimentation. Éviter d'utiliser un économiseur

d'écran ou un autre logiciel empêchant la

gestion de l'alimentation de fonctionner.

Cleaning Guideline

Guide de nettoyage

Use a soft cloth moistened with water or a non-

alkaline detergent to wipe the exterior of the

product.

[FR] Utiliser un chiffon doux humidifié avec de

l’eau ou un détergeant non alcalin pour

essuyer l'extérieur du produit.

Gently wipe the display with a soft, lint-free

cloth. Do not use alcohol or detergent on the

product.

[FR] Essuyer délicatement l'écran avec un

chiffon doux non pelucheux. Ne pas utiliser

d'alcool ou un détergent sur le produit.

Touchscreen Guideline

Guide de l'écran tactile

Use your finger or the stylus on the display.

Using sharp or metallic object may cause

scratches and damage the display, thereby

causing errors.

[FR]Utiliser votre doigt ou le stylet sur l'écran.

L'utilisation d'un objet pointu ou métallique

peut provoquer des rayures.

Use a soft cloth to remove dirt on the display.

The touchscreen surface has a special

protective coating that prevents dirt from

sticking to it. Not using a soft cloth may cause

damage to the special protective coating on

the touchscreen surface. To clean off hard to

remove dirt, blow some steam on the particular

area and gently wipe away using a soft cloth.

[FR]Utiliser un chiffon doux pour enlever la

poussière sur l'écran. La surface de l'écran

tactile a un revêtement protecteur spécial

empêchant la saleté de se coller à lui. Ne pas

utiliser un chiffon doux peut endommager le

revêtement spécial sur la surface de l'écran

tactile. Pour nettoyer les saletés plus difficiles

à enlever, souffler de la buée sur la zone

particulière et essuyer doucement avec un

chiffon doux.

Do not use excessive force on the display.

Avoid placing objects on top of the display as

this may cause the glass to break.

[FR]Ne pas utiliser une force excessive sur

l'écran. Éviter de placer des objets au dessus

de l’écran cela pourrait provoquer une cassure

du verre.

When there is a noticeable discrepancy in the

operation of the touchscreen function (your

touch does not correlate to the proper location

on the screen), recalibrate the touchscreen

display.

[FR]Lorsqu'il y a un écart sensible dans le

fonctionnement de l'écran tactile (votre contact

ne correspond pas à la bonne position sur

l'écran), recalibrer l'écran tactile.

7

Rugged Windows Tablet M101B/ M101BL User Guide

1.4 Declaration of Conformity (DoC)

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation

This equipment has been tested and found to comply with the limits for a class "B" digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at him own expense.

CE Notice (European Union)

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2015/AC:2016

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU legislations and harmonized

standards. Product also complies with the Council directions.

8

Chapter 2: Getting Started

Thank you for purchasing this rugged Tablet Computer. The rugged design allows you to use it in

harsh outdoor environments.

This chapter tells you step by step how to get the Tablet Computer up and running. You will find

instructions for the following procedures:

 Unpacking

 Description of Parts

 First Time Operations

 Powering On/Off

2.1 Unpacking

Check and identify the standard supplied accessories.

Standard factory shipment list:

 Tablet Computer

 Standard Battery

 Power Adapter

 Power Cord and Plugs

 Capacitive Touch Stylus

 Driver CD

9

Rugged Windows Tablet M101B/ M101BL User Guide

Optional Accessories

Your package may include optional accessories based on your order.

M101B offers the following optional accessories that can be purchased:

Gigabit Ethernet Adapter

 For LAN from 30-pin extension port

 Length; 10 cm

 Connector: RJ45, female

 Gigabit LAN, 10/100/1000 Mbps

RS232 Ethernet Adapter

 For RS232 from 30-pin extension port

 Length:10 cm

 Connector: DB9 Serial RS232 Cable,

female

High Capacity Battery

 Capacity: 7.4V min. 10280 mAh, typ.

10600 mAh (2S2P)

 Li-Polymer Battery

Hand Strap

 Ergonomic hand-strap can help you

handle the Rugged Tablet PC much

more easily and comfortably.

Battery Charger

 Dual charging bays supporting both

BS101 and BL101.

 LED indicators to show current battery

charging status.

Vehicle Charger

 Rapidly charges your M101B Tablet PC

in your car while you drive

 Length: 3m

Desk Docking

 4 x USB 2.0 (2 x Rear, 2 x Side)

 1 x LAN (10/100)

 1 x VGA

 1 x RS232

Vehicle Docking

 VESA Mounting support

 4 x USB 2.0 (2 x Rear, 2 x Bottom)

 1 x LAN (10/100)

 1 x RS232

 1 x GPS ANT SMA

 9-36V DC IN with 3-pin terminal block

 Easy insert and release with Key-Lock

Active stylus

 2 x Side Buttons (Eraser, Barrel)

 Support Win7, Win8, Win10, Linux

 Replaceable Battery 0.9V~1.8V, AAAA*1

 Pen tip Diameter : 2.0 +/- 0.2mm

VESA Mount Kit

• 75 x 75 mm VESA Mount

• Slim design; SGCC material

10

Chapter 2: Getting Started

2.2 Description of Parts

Front:

Right:

No

Item

Description

1

Front Camera

2 Megapixel Webcam

2

LED

Indicators:

Show the current status

of the Tablet Computer

3

Touch Screen

Display and act as one

of the inputs for the

Tablet Computer

4

Fn1 Button

Programmable function

key configured by

Hottab Utility

5

Menu Button

Hottab Quick Access

6

Power Button

Power on/off tablet

7

I/O Cover

Protects I/O ports

No

Item

Description

8

Micro HDMI

HDMI output to

external display

9

LAN/RS232

Adapter port for

LAN/RS232 connector

10

USB 3.0

High speed USB port

connects to USB

devices, such as USB

flash drive, mouse,

keyboard, printer, etc.

11

Mic In/Line

Out

Headset or headphone

can be connected (Mic

is only supported with

3.5mm 4-pin headset)

12

Power Jack

DC-IN power input jack

13

MicroSD

Card Reader

Memory card reader

port for MicroSD Card

14

Reset Button

Hardware reset button

Front LED Indicators Details:

11

Rugged Windows Tablet M101B/ M101BL User Guide

Rear:

No

Item

Description

15

Kensington

Lock Port

Provide lock access

for Kensington Lock.

16

Optional

Barcode

Barcode Scanner for

reading of 1D/2D

barcode.

17

Optional RFID

RFID reader for

reading of RFID tags.

18

Rear Camera

5MP Autofocus

Camera. Captures

photos and videos.

19

Camera Flash

LED camera flash to

provide flash lighting

when use with

camera.

20

Expansion

Port

Provide optional

connectivity to custom

modules for special

application (USB2.0 x

1 , RS232 x 1).

21

Fn2 Button

Programmable

function key

configured by Hottab

Utility

22

Volume

Buttons

Volume Control.

(+) Raise volume,

(-) Lower volume.

23

Battery Lock

Latch

Latch to lock the

battery in place once

battery is inserted. Not

spring-loaded.

24

Battery

Release Slider

Spring-loaded slider

that latches the battery

in.

Bottom:

No

Item

Description

25

Touch Pen

Slot

Pen holder slot to

store touch pen

26

3G / LTE

Module / SIM

card slot

Service window to

insert Micro SIM card.

Also provide access to

3G / LTE Module.

27

Speakers

Emit sounds.

28

Docking

Connector

Port to docking

solutions such as

vehicle docking to

provide power and

external antenna

12

Chapter 2: Getting Started

2.3 HotKey for Specific Functions

For the physical buttons on the tablet computer, in addition to its dedicated functions detailed in

the previous section, it can also be used to emulate commonly used keyboard key strokes. Under

different scenario, a single physical button or a combination of physical buttons provide different

keyboard key strokes, which are specified below:

Under POST (before Windows boots up):

Buttons

Keystroke

Menu

F7 to enter

BIOS setup

screen

Fn1

F6 to enter

Recovery Menu

Fn2

ESC

Volume Up (+)

Up

Volume Down (-)

Down

Menu + Fn1

Enter

Menu + Volume Up (+)

Right

Menu + Volume Down (-)

Left

Under Windows:

Buttons

Keystroke

Menu

Hottab Quick Access

Fn1

Default: Web Browser

Fn2

Default: Camera

Volume UP (+)

Raise volume

Volume Down (-)

Lower volume.

Power

Power ON/ OFF

Volume Up (+) +

Volume Down (-)

Ctrl + Alt + Del

LED Indicators:

Item

Description

Power Indicator

Blue– Tablet is ON

No light– Tablet is OFF

Battery Status

Orange–AC adapter is plugged in and charging

Green–AC adapter is plugged in and battery is full charged

Solid Red - Low battery (<10%)

Blinking Red – Battery is being hot swapped.

No light – Battery is in use and more than 10%

Disk Activity

Indicator

Green - Disk Activity

No light - Disk Idling

RF Communication

Green - WiFi/BT/WWAN/GPS ON

No light - WiFi/BT/WWAN/GPS are all OFF

2.4 First-Time Operation

To get started:

1. Install SIM card.

2. Install storage card.

3. Install the battery.

4. Charge your tablet.

5. Start the tablet.

13

Rugged Windows Tablet M101B/ M101BL User Guide

2.4.1 Installing SIM Card (For 3G/LTE Equipped Devices)

The Tablet Computer supports 3G/LTE data connection and fits a Micro-SIM card.

To install the SIM card:

Tools Needed:

Service Windows

Screw: M2x5, 4 pc

Screwdriver: Philips Type , Size #0 , for

M2 screws, torque: 2.0 ± 0.5 kgf.cm

3G/ LTE Module

Screw: M2x3.5, 1 pc

Screwdriver: Philips Type , Size #0 , for

M2 screws, torque: 2.0 ± 0.5 kgf.cm

❶ Remove four screws and remove the service

window.

❷ Remove the one screw that secures the 3G/ LTE

module. Carefully lift the module up. Do not to damage

the connected cables!

❸ Carefully flip and move the 3G/ LTE module and

to the right. Do not disconnect cables!

❹ Insert SIM-Card all the way in. Chip/ contact facing

down.

❺ Use your hand to carefully pull the cable outside

the module card. Re-insert the 3G/LTE module and

fasten one screw. Accurately route the cables. Do

not bend cables! Do not pinch/ squeeze the cable!

❻Re-insert the service window and fasten with the four

screws.

14

Chapter 2: Getting Started

Caution

When re-inserting 3G/LTE module, please pay attention to cable routing. Make sure the

cable module does not get squeezed.

2.4.1 Inserting Battery Pack

To insert the standard battery pack into the Tablet Computer:

1. Disconnect AC adapter and power cord from the tablet computer.

2. Turn the tablet computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Insert the battery on the connector-pins side first, and then lower the battery into the battery

compartment. Continue to hold the Battery Release Slider before battery is fully inserted.

6. Make sure the battery is completely lowered into the compartment before letting go the

Battery Release Slider. Battery will be flat against the housing once fully inserted

Removing the Battery Pack

1. Power off the tablet computer (or put it to sleep). Disconnect any cords connected to the

computer.

2. Turn the tablet computer over, back facing up.

3. Locate the Battery Lock Latch and push it to the “Unlocked” position.

4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.

5. Lift the battery out using the opening on side of battery compartment.

2.4.2 Connecting to Power Supply

The Tablet Computer operates either on external AC power or internal battery power.

It is recommended to use AC power when you start up the Tablet Computer for the first time.

CAUTION

Use only the AC adapter included with your Tablet Computer.

Using other AC adapters may damage the Tablet Computer and

the Battery.

CAUTION

For users start up the Tablet Computer for the first time with

internal battery power, please make sure the battery is fully

charged before using.

15

Rugged Windows Tablet M101B/ M101BL User Guide

Perform the following to connect the Tablet computer to AC Power:

1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch

2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.

3. Plug the AC power cord into the AC adapter.

4. Finally, Plug the AC power cord into the electrical outlet.

When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator on

the tablet computer would show different states. Please refer to description of LED indicator on

Description of Parts.

Item

Hours

Battery Life

Standard Battery (BS101)

8 Hours

High Capacity Battery (BL101)

16 Hours

Item

Hours

Battery Charging hours

Standard Battery (BS101)

2.5 Hours

High Capacity Battery (BL101)

4.5 Hours

16

Chapter 2: Getting Started

2.5 Powering On / Off

2.5.1 Powering On

Press and hold the power button for 3 seconds until the blue LED power indicator light up.

NOTE:

 Do not press the power button repeatedly.

 Do not perform the following operations until the Disk Activity Indicator off

o Connecting or disconnecting the AC adapter

o Pressing the power button

o Touching the tablet buttons, screen, or external keyboard/mouse

2.5.2 Powering Off

Perform the following procedure to power off the Tablet Computer:

1. Make sure you have closed any programs that are open on the Desktop. Start Screen apps

don’t need to be closed.

2. Under Windows 8.1 OS, open the Charms Bar by swiping your finger from the far right of

the screen towards the middle of the screen.

3. Tap on the Settings charm.

4. Tap on Power.

5. Tap on Shut Down.

6. Wait for Tablet Computer to power off.

NOTE:

 The computer will forcibly be powered off if the power button is pressed and

held for 6 seconds or longer.

17

Rugged Windows Tablet M101B/ M101BL User Guide

Chapter 3: Setting Up Windows for the First Time

CAUTION

For users start up the Tablet Computer for the first time with

internal battery power, please make sure the battery is full

charged before using.

This section details how to setup different version of the Windows that may be installed on the

tablet for the first time.

NOTE:

Please notice that BIOS will vary with different Windows OS; for users going to

change OS, please contact our sales contact window for details.

3.1 Setting Up Windows Embedded Standard 7 (WS7P)

During the setup process, you create a user name and password, verify the correct time and date,

and then choose your Internet network.

3.1.1 Creating a user name and password

1. Create a User name. (This user name is for the administrator of the computer.)

2. Type the selected user name in the text box, and then click Next.

3. On the next screen, type the password in the text box, retype the password in the next box,

and then click Next.

3.1.2 License Agreement

The next screen requests confirmation that you accept the Software License Terms and the End

User License Agreement.

Click both check boxes and then click Next.

3.1.3 Protecting your computer

The next screen displays options for protecting the security of your computer and for receiving

Windows updates.

18

Chapter 3: Setting Up Windows for the First Time

You have three choices:

1. Use recommended settings (automatically downloads and installs all updates provided by

Microsoft)

2. Install important updates only (only downloads and installs critical updates)

3. Ask me later.

Click the option you wish to use.

Reviewing your time and date settings

The next screen contains options for changing the date and time settings.

Verify your time zone, time, and date. Make any necessary changes. Then click Next to continue.

19

Rugged Windows Tablet M101B/ M101BL User Guide

3.1.4 Choosing your computer's network

If you have a home network, connect with an Ethernet cable or activate the Wireless feature

before continuing.

Use the following steps to setup your computer network:

1. Choose a wireless network from the list.

2. If you do not see your network, click Connect to a hidden wireless network, enter the

network name, and select the security type and encryption type. Or, click Skip to continue

without a wireless connection and set it up later.

3. From the next screen, select one of the following locations for your computer:

 Home network: Select this location if all the computers on this network are at your home

and you recognize them. This is a trusted home network.

 Work network: Select this location if all the computers on this network are at your

workplace and you recognize them. This is a trusted work network.

 Public network: Select this location if you do not recognize all the computers on the

network. (For example, you are in a coffee shop or airport, or you have mobile broadband.)

This is a public network and is not trusted.

4. Click the location where you will most often use the computer.

3.1.5 Completing Windows 7 Setup

After completing Windows 7 setup, a Preparing your desktop screen displays. Please allow

several minutes for Windows to save your settings.

La page charge ...

Winmate M101B Series Manuel utilisateur

Ce manuel convient également à

Winmate M101B Series Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents