Philips SHB2505 WHITE Le manuel du propriétaire

HD6574, HD6570

1

2

3

4

5

6

7

8

9

10

11

12

18

21

20

19

13

14

15

17

16

English 6

Deutsch 30

Français 56

Nederlands 81

English

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit

from the support that Philips offers, register your product at

www.philips.com/welcome.

SENSEO® coffee system

Make your coffee moments truly special with SENSEO

®

. This unique system

combines the easy-to-use Philips SENSEO

®

coffee machine with the

specially developed SENSEO

®

coffee pods, giving you a full, smooth coffee

with a delicious foam layer. The convenient SENSEO

®

coffee pods and

Philips’ unique new SENSEO

®

brewing system are perfectly matched to

ensure that the best taste and aroma are extracted from the coffee.

Discover all SENSEO

®

coffee blends at www.senseo.com. To ensure a

smooth and full coffee taste, you should keep the following things in mind:

Flush before first use

Flush the machine before first use. After the flushing cycle (which only takes

approx. 2 minutes), the machine is ready for brewing coffee.

When to descale

Descale the SENSEO

®

coffee machine when the CALC light lights up, but at

least once every 3 months. There is no difference between soft-water and

hard-water areas in this respect. Descaling takes about 1 hour. Do not

interrupt the descaling process.

Fresh coffee pods

Use the specially developed SENSEO

®

coffee pods with your SENSEO

®

coffee machine for a full, round taste. SENSEO

®

coffee pods stay fresh

longer when you store them in a storage container.

Clean cold water

Use clean cold water every day. If you have not used the coffee machine for

one day, you have to flush it with clean cold water before you use it again.

A clean machine

Clean and descale the Philips SENSEO

®

coffee machine regularly. Remove

used coffee pods after brewing. If a used pod has been left in the coffee

machine and you have not used the machine for some time, flush the

machine before you use it again. For more information on why it is

important to descale, how to descale or which descaler to use, visit our

website at www.philips.com/descale-senseo.

6

English

Fresh milk

To get the best results, we advise you to use cold semi-skimmed milk

directly from the fridge. If there is still milk in the milk container after

brewing, you can store the milk container in the fridge for up to 24 hours.

General description (Fig. 1)

1 1-cup pod holder

2 2-cup pod holder

3 Coffee collector

4 Water distribution disc

5 Coffee spout

6 Milk spout

7 Milk tube

8 Cup tray

9 Removable drip tray

10 Milk container

11 Milk container lid

12 Water reservoir

13 CALC button

14 Café Latte button

15 Latte Macchiato button

16 Cappuccino button

17 1-cup/2-cup indicator

18 On/off button

19 Regular coffee button

20 Strong coffee button

21 Frothed milk only button

Important safety information

Read this important information carefully before you use the appliance and

save it for future reference.

Danger

-

Never immerse the machine in water or any other liquid.

Warning

-

Check if the voltage indicated on the machine corresponds to the

local mains voltage before you connect the appliance.

-

Always put the plug in an earthed wall socket.

-

Do not use the appliance if the plug, the mains cord or the

appliance itself is damaged.

-

Always disconnect the machine from the mains when you clean it.

-

If the mains cord is damaged, you must have it replaced by Philips,

a service center authorized by Philips or similarly qualified persons

in order to avoid a hazard.

7

English

-

This machine can be used by children aged from 8 years and

above and by persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in

a safe way and if they understand the hazards involved. Cleaning

and user maintenance shall not be made by children unless they

are older than 8 and supervised. Keep the appliance and its cord

out of reach of children aged less than 8 years.

-

Children shall not play with the machine.

Caution

-

Always return the machine to a service center authorized by

Philips for examination or repair. Do not attempt to repair the

machine yourself, otherwise your warranty becomes invalid.

-

After unpacking the machine, never put your SENSEO

®

machine on

its side. Always keep it in upright position, also during transport.

-

Never put normal ground coffee or use torn pods in the pod

holder, as this causes it to become blocked.

-

Do not use the machine in combination with a transformer, as this

could cause hazardous situations.

-

Always put the machine on a flat and stable surface.

-

Do not place the appliance on a hotplate, directly next to a hot

oven, heater or similar source of heat.

-

Do not place the machine in a cabinet when in use.

-

Never let the machine operate unattended.

-

Do not use the machine at altitudes higher than 2200 meters

above sea level.

-

Do not use the machine at a temperature below 10°C. Water left in

the machine may freeze and cause damage.

-

Clean the milk spout, the milk tube and the milk container regularly

in hot water with some washing-up liquid or in the dishwasher to

ensure reliable performance and good frothing results.

-

Never pour any other liquid than clean cold water into the water

reservoir.

8

English

-

Never flush the machine or let it brew coffee when the spout is not

in place.

-

Descale the machine at least every 3 months. Not doing so may

cause the machine to stop working properly. In this case, repair is

not covered under your warranty.

-

Flush the coffee machine with fresh water before you use it for the

first time (see chapter ‘First use’). This causes the system to fill with

water, which is essential for the machine to work properly.

-

Do not use the SENSEO

®

machine in combination with water

softeners based on sodium exchange.

-

Philips strongly advises you to descale this SENSEO

®

regularly. If

the machine is not descaled in time and according to the

procedure described in chapter ‘Descaling’, this may lead to

technical failures.

-

Never interrupt the descaling process.

-

Never use a descaling agent based on mineral acids such as

sulphuric acid, hydrochloric acid, sulphamic acid and acetic acid

(e.g. vinegar). These descaling agents may damage your coffee

machine.

-

The machine is intended for normal household use only. It is not

intended for use in environments such as staff kitchens of shops,

offices, farms or other work environments, nor is it intended to be

used by clients in hotels, motels, bed and breakfasts and other

residential environments.

Electromagnetic fields (EMF)

This Philips machine complies with all applicable standards and regulations

regarding exposure to electromagnetic fields.

First use

Flushing the machine before first use

It is important that you flush the machine and milk spout before first use.

After the flushing cycle (which only takes approx. 2 minutes), the machine is

ready for brewing SENSEO

®

coffee.

9

English

Caution: Never interrupt the flushing cycle halfway. If you do, the system

does not fill itself properly.

2

1

1 Tilt the top of the water reservoir backwards and lift the water reservoir

off the machine.

2 Fill the water reservoir to the MAX level with cold tap water.

1

2

3 Tilt the water reservoir and place the bottom back onto the machine (1).

Then press the top of the water reservoir towards the machine (2).

4 Slide the milk spout into the machine over the guiding rails on the coffee

spout. The milk spout is attached properly when you hear a click.

1 l

5 Place a bowl with a capacity of at least 1 liter under the spout.

10

English

6 Make sure that a pod holder, without pod or pods, is in place.

7 Put the plug in an earthed wall socket.

8 Press the on/off button. The button lights up to indicate that you have to

flush the machine.

9 To start flushing, press any of the recipe buttons on the touch panel.

-

During the flushing cycle, the system fills itself with water from the

water reservoir and cold water comes out of the coffee spout and milk

spout. During the flushing cycle, the machine produces more noise

than during a regular brewing cycle.

-

When all the water in the water reservoir has been used up, the

flushing cycle is finished and the machine switches off. You may notice

some steam coming from the machine, this is normal.

10 When all the water in the water reservoir has been used up, the flushing

cycle is finished and the machine switches off.

11 Empty the bowl.

12 Fill the water reservoir with fresh tap water and place it back into the

machine.

11

English

Brewing black SENSEO® coffee

1 Make sure that the water reservoir is filled with fresh cold tap water.

Tip: Use fresh water every day.

2 Put the plug in an earthed wall socket.

3 Press the on/off button. The on/off button flashes slowly while the water

heats up.

Note: If the on/off button flashes rapidly, the water reservoir does not

contain enough water for brewing one cup of coffee.

4 Pull the lid lever upwards to open the lid. The lid opens automatically.

1

2

5 If you want to make one cup of SENSEO

®

coffee, place the 1-cup pod

holder in the machine (1). If you want to make two cups, put the 2-cup

pod holder in the machine (2). Make sure the pod holder is clean.

1

2

6 Place 1 coffee pod in the 1-cup pod holder (1) or place 2 coffee pods in

the 2-cup pod holder (2). Place the pod or pods properly in the center of

the pod holder, with the convex side pointing downwards. Press the pod

or pods lightly into the pod holder.

Note: Make sure that the coffee in the pod or pods is evenly distributed.

Caution: Never put normal ground coffee or use torn pods in the

SENSEO

®

machine, as this causes it to become blocked.

12

English

7 Close the lid (1) and lock the lever (2).

Warning: Make sure the lid is closed properly and the lid lever is

locked before you start brewing.

8 Place one cup or two cups under the spout openings.

Note: You can adjust the height of the drip tray or remove the drip tray to

be able to place higher cups.

Note: The cups you use should have a capacity of at least 150ml when

you brew regular coffee or 100ml when you brew strong coffee. Do not

use cups that are too large, as they cause the coffee to get cold more

quickly.

9 Select the coffee strength and the number of cups you want to brew.

1x

-

Press the button for regular coffee for one cup of regular coffee. The

1-cup indicator lights up.

2x

-

Press the button for regular coffee twice for two cups of regular

coffee. The 2-cup indicator lights up.

1x

-

Press the button for strong coffee once for one cup of strong coffee.

The 1-cup indicator lights up.

13

English

2x

-

Press the button for strong coffee twice for two cups of strong coffee.

The 2-cup indicator lights up.

10 When the water has heated up and the on/off button lights up

continuously, the machine starts brewing coffee.

Note: Do not remove the water reservoir during a brewing cycle.

11 When the coffee is ready, remove the used coffee pod or pods. Simply lift

the pod holder out of the machine and empty it.

Caution: There may still be some hot water/coffee on the coffee pod or

pods.

12 After use, press the on/off button to switch off the machine.

Note: If you do not use the machine, it switches off automatically after 15

minutes to save energy.

Brewing recipes with fresh milk

With this SENSEO

®

coffee machine you can easily create one or two cups of

perfect cappuccino, café latte, latte macchiato or warm milk.

1 Make sure that the water reservoir is filled with fresh cold tap water.

Tip: Use fresh water every day.

2 Put the plug in an earthed wall socket.

3 Press the on/off button. The on/off button flashes slowly while the water

heats up.

Note: If the on/off button flashes rapidly, the water reservoir does not

contain enough water for brewing one cup of coffee.

4 Pull the lid lever upwards to open the lid. The lid opens automatically.

14

English

1

2

5 If you want to make one cup of cappuccino, café latte or latte macchiato,

place the 1-cup pod holder in the machine (1). If you want to make two

cups, put the 2-cup pod holder in the machine (2). Make sure the pod

holder is clean.

Note: For warm milk only, you do not have to place a pod holder in the

machine. Proceed with step 7.

1

2

6 Place 1 coffee pod in the 1-cup pod holder (1) or place 2 coffee pods in

the 2-cup pod holder (2). Place the pod or pods properly in the center of

the pod holder, with the convex side pointing downwards. Press the pod

or pods lightly into the pod holder.

Note: Make sure that the coffee in the pod or pods is evenly distributed.

Caution: Never put normal ground coffee or use torn pods in the

SENSEO

®

machine, as this causes it to become blocked.

7 Close the lid (1) and lock the lever (2).

Warning: Make sure the lid is closed properly and the lid lever is

locked before you start brewing.

8 Slide the milk spout into the machine over the guiding rails on the coffee

spout. The milk spout is attached properly when you hear a click.

9 Remove the lid from the milk container.

15

English

10 Fill the milk container with cold milk.

Tip: Use fresh semi-skimmed cow's milk directly from the fridge for the

best frothing results.

Note: To prevent excessive steaming, make sure that there is enough milk

in the milk container.

11 Place the lid on the milk container.

1

2

12 Insert the connector of the milk tube into the milk spout (1). Insert the

other end of the milk tube into the milk container through the opening in

the lid (2).

13 Place one cup or two cups under the spout openings.

Note: You can adjust the height of the drip tray or remove the drip tray to

be able to place higher cups.

14 Press the recipe button of your choice once for one cup and twice for

two cups. You can choose:

1x

-

Press once for 1 cappuccino.

16

English

2x

-

Press twice for 2 cappuccinos.

1x

-

Press once for 1 latte macchiato.

2x

-

Press twice for 2 latte macchiatos.

1x

-

Press once for 1 café latte.

2x

-

Press twice for 2 café lattes.

17

English

1x

-

Press once for 1 frothed milk only.

2x

-

Press twice for 2 frothed milks only.

-

Depending on the number of cups selected, the 1-cup indicator or the

2-cup indicator lights up.

15 When the water has heated up and the on/off button lights up

continuously, the machine starts brewing one of the coffee with milk

recipe or frothed milk only automatically.

Note: The machine first brews milk and then adds the coffee. In case of

café latte, the machine first adds coffee and then brews milk.

16 When the coffee is ready, remove the used coffee pod or pods. Simply lift

the pod holder out of the machine and empty it.

Caution: There may still be some hot water or coffee on the coffee pod

or pods.

17 Disconnect the milk tube from the milk spout and the milk container.

Remove the milk spout from the machine. Clean the milk spout, the milk

tube and the milk container (see 'Cleaning the machine').

Tip: If there is still some milk left in the milk container when you have

finished brewing, put the milk container in the fridge. The milk will stay

fresh for up to 24 hours.

18 After use, press the on/off button to switch off the machine.

Note: If you do not use the machine, it switches off automatically after 15

minutes to save energy.

18

English

Adjusting the volume

Only HD6574 has this feature.

You can adjust the volume of each recipe to your own personal taste by

programming the different recipes.

1 Press the on/off button to switch on the machine.

2 Fill the water reservoir with cold water up to the MAX indication.

3 Put a coffee pod in the pod holder.

4 Press the CALC button and the button for the recipe you want to adjust

simultaneously. Release the buttons when the machine beeps twice after

approximately two seconds.

-

The 1-cup symbol starts to flash.

5 Press one of the following buttons to change the coffee volume: the

regular coffee button for a larger cup, the milk only button for a medium

cup (default setting) or the strong coffee button for a smaller cup.

-

The machine beeps three times to confirm and starts to brew a coffee

recipe according to the new setting.

6 The machine saves the setting automatically.

Cleaning the machine

Regular cleaning of your SENSEO

®

machine is important to ensure that the

SENSEO

®

coffee always tastes optimally and to optimize the lifetime of the

coffee machine.

19

English

Cleaning the milk spout and the milk container

For a reliable performance of the milk spout and consistently good frothing

results, it is important to clean the milk spout, the milk tube and the milk

container regularly and thoroughly. The milk spout can be disassembled

completely, which allows you to remove all milk residues from it.

Note: If you do not plan to froth milk again straight away, rinse the milk

spout and milk tube within 30 minutes after use. After the last use of the

day, clean the milk spout and milk tube thoroughly.

Rinsing after every use

1 Fill the milk container with clean water.

1

2

2 Place the lid on the milk container. Insert the connector of the milk tube

into the milk spout (1). Insert the other end of the milk tube into the milk

container through the opening in the lid (2).

3 Place an empty cup under the spout.

4 Press the milk only button.

5 The machine rinses all milk residues from the milk spout and milk tube

with clean hot water.

20

English

La page charge ...

Philips SHB2505 WHITE Le manuel du propriétaire

Ce manuel convient également à

Philips SHB2505 WHITE Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents