Simplicity OPERATOR'S MANUAL FOR FRENCH MURRAY/YARD KING 46-INCH TRACTORS Manuel utilisateur

Part No. 7103094

Revision ‘-’, 12/2/2008

Operator’s Manual

Mower

Model No. (Mfg. No.) Description

ELT175460F (7800482) Murray Riding Mower, 17.5HP, 46"

ELT22460F (7800483) Murray Riding Mower, 22HP, 46"

EYK175460F (7800487) Yard King Riding Mower, 17.5HP, 46"

EYK22460F (7800488) Yard King Riding Mower, 22HP, 46"

en

Operator’s Manual – Riding mower

fr

Manuel d’utilisation – Tondeuse autoportée

Not for

Reproduction

Thank you for purchasing this quality-built MURRAY/YARD KING mower. We are pleased that you’ve placed your confidence in

the MURRAY/YARD KING brand. When operated and maintained according to the instructions in this manual, your MURRAY/

YARD KING mower will provide many years of dependable service.

This manual contains safety information to make you aware of the hazards and risks associated with mowers and how to

avoid them. Because Briggs & Stratton Power Products Group, LLC does not necessarily know all the applications this mower

could be used for, it is important that you read and understand these instructions. Keep this manual near the mower for

convenient reference.

This mower requires final assembly before use. Refer to the Assembly section of this manual for instructions on final

assembly procedures. Follow the instructions completely.

Where to Find Us

You never have to look far to find Briggs & Stratton support and service for your mower. There are over 30,000 Briggs &

Stratton authorized service dealers worldwide who provide quality service. You can also contact Briggs & Stratton Customer

Service by phone at (800) 528-5087, or on the Internet at www.murray.com.

Mower

Model Number _____________________________________

Serial Number _____________________________________

Engine

Model Number _____________________________________

Serial Number _____________________________________

Date Purchased

MURRAY is a trademark of Briggs & Stratton Power Products Group, LLC.

YARD KING is a trademark of Briggs & Stratton Power Products Group, LLC.

Briggs & Stratton Power Products Group, LLC

900 N. Parkway

Jefferson, WI 53549

in any form by any means without the express written permission of Briggs & Stratton Power Products Group, LLC.

Not for

Reproduction

3

A

B

C

D

E

G

H

F

1

A B

2

A

B

43

B

D

E

A

C

D

A

B

E

C

H

G

F

5

A

B

6

H

E

A

B

D

C

G

F

A

7

Not for

Reproduction

4 murray.com

C

D

F

E

A

G

B

8

C

7

1

0

1

935

A

B

11

A

13

D

7101936

A B

C

10

A

12

9

A

B

Not for

Reproduction

5

B

A

C

E

D

A

F

G

E

C

D

A

B

E

C

D

A

14 15

B

16

17 18

B

A

B

C

D

E

A

19 20

Not for

Reproduction

6 murray.com

A

D

C

B

A

B

D

G

F

C

H

A

E

A

B

D

C

G

F

21 22

23

24 25

Guards removed for clarity

Protections non représentés pour des raisons de clarté

Guards removed for clarity

Protections non représentés pour des raisons de clarté

Not for

Reproduction

7

C

B

A

I

J

M

L

N

O

P

T

U

S

Q

R

A

H

A

H

B

G

D

E

F

C

B

A

C

B

E

D

F

K

W

V

26 27

28

Guards removed for clarity

Protections non représentés pour des raisons de clarté

Not for

Reproduction

8 murray.com

B

C

D

A

B

C

A

B

A

B

C

A

B

A

B

A

B

C

D

29 30

11

22

3 3,4,5,6

31

32 33

35

34

A

B

C

D

36

Not for

Reproduction

9

37

A

M

L

K

B

F

C

D

G

H

I

E

J

H

D

C

G

E

A

B

E

F

G

B

J

K

38

I

Not for

Reproduction

10 murray.com

A

B

C

D

E

F

A

H

I

G

B

D

C

E

F

J

C

A

B

39 40

41 42

Not for

Reproduction

English Français

11

Table of Contents

Operator Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Important Operator Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

International Pictorials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Parts Bag - Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Installing the Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Assembling the Steering Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Maintenance Free Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

IMPORTANT! Before You Start Mowing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Features and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Electrical Safety System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Driving and Stopping the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Mowing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Engine Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Maintenance Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

General Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Maintenance Free Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Mower Housing Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Warranties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Two Year Limitied Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

WARNING

Battery posts, terminals and related accessories contain

lead and lead compounds, chemicals known to the State

of California to cause cancer and birth defects or other

reproductive harm. Wash hands after handling.

!

WARNING

Engine exhaust, some of its constituents, and certain

vehicle components contain or emit chemicals known to

the State of California to cause cancer or other reproductive

harm.

!

Not for

Reproduction

12 murray.com

! !

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw

objects that can cause injury and damage! Failure to comply with the following SAFETY instructions

could result in serious injury or death to the operator or other persons. The owner of the machine

must understand these instructions and must allow only persons who understand these instructions to

operate machine. Each person operating the machine must be of sound mind and body and must not

be under the influence of any substance, which might impair vision, dexterity or judgment. If you have

any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call

Customer Service Department. Phone: (1-800-528-5087).

Protection for Children

Tragic accidents can occur if the operator is not alert to

the presence of children. Children are often attracted to the

machine and the mowing activity. Children who have been

given rides in the past may suddenly appear in the mowing

area for another ride and be run over or backed over by the

machine. Never assume that children will remain where you

last saw them.

1. KEEP children out of the mowing area and under the

watchful care of a responsible adult other than the operator.

2. DO NOT allow children in yard when machine is operated

(even with the blade OFF).

3. DO NOT allow children or others to ride on machine,

attachments or towed equipment (even with the blades

OFF). They may fall and be seriously injured.

4. DO NOT allow pre-teenage children to operate machine.

5. ALLOW only responsible adults and teenagers with

mature judgment under close adult supervision to operate

machine.

6. DO NOT operate blades in reverse. STOP BLADES. LOOK

and SEE behind and down for children, pets and hazards

before and while backing.

7. USE EXTRA CARE when approaching blind corners,

shrubs, trees, or other objects that may obscure vision.

Protection against Tipovers

Slopes are a major factor related to loss-of-control and tip-

over accidents, which can result in severe injury or death.

All slopes require extra CAUTION. If you cannot back up

the slope or if you feel uneasy on the slope, DO NOT mow

it. Use extra care with grass catchers or other attachments;

these affect the handling and the stability of the machine.

1. DO NOT operate machine on slopes exceeding

10 degrees (18% grade).

2. Turn blades OFF when traveling uphill. Use a slow speed

and avoid sudden or sharp turns.

Protection against Tipovers

(Continued from Previous Column)

3. DO NOT operate machine back and forth across face

of slopes. Operate up and down. Practice on slopes with

blades off.

4. AVOID starting, stopping or turning on slopes. If machine

stops going uphill or tires lose traction, turn blades OFF and

back slowly straight down the slope.

5. STAY ALERT for holes and other hidden hazards.

Tall grass can hide obstacles. Keep away from ditches,

washouts, culverts, fences and protruding objects.

6. KEEP A SAFE DISTANCE (at least 3 feet [1 m]) away

from edge of ditches and other drop offs. The machine

could turn over if an edge caves in.

7. Always begin forward motion slowly and with caution.

8. Use weights or a weighted load carrier in accordance

with instructions supplied with a grass catcher. DO NOT

operate machine on slopes exceeding 10 degrees (18%

grade) when equipped with grass catcher.

9. DO NOT put your foot on the ground to try to stabilize

the machine.

10. DO NOT operate machine on wet grass. Reduced

traction could cause sliding.

11. Choose a low enough speed setting so that you will not

have to stop or shift on a slope. Tires may lose traction on

slopes even though the brakes are functioning properly.

12. DO NOT operate machine under any condition where

traction, steering or stability is doubtful.

13. Always keep the machine in gear when going down

slopes. DO NOT shift to neutral (or actuate hydro roll

release) and coast downhill.

Important Operator Safety Instructions

Not for

Reproduction

13

Preparation

1. Read, understand, and follow instructions and

warnings in this manual and on the machine, engine and

attachments. Know the controls and the proper use of the

machine before starting.

2. Only mature, responsible persons shall operate the

machine and only after proper instruction.

3. Data indicates that operators age 60 and above, are

involved in a large percentage of mower-related injuries.

These operators should evaluate their ability to operate the

mower safely enough to protect themselves and others

from serious injury.

4. Handle fuel with extra care. Fuels are flammable and

vapors are explosive. Use only an approved fuel container.

DO NOT remove fuel cap or add fuel with engine running.

Add fuel outdoors only with engine stopped and cool. Clean

spilled fuel from machine. DO NOT smoke.

5. Practice operation of machine with BLADES OFF to learn

controls and develop skills.

6. Check the area to be mowed and remove all objects such

as toys, wire, rocks, limbs and other objects that could

cause injury if thrown by blade or interfere with mowing.

7. Keep people and pets out of mowing area. Immediately

STOP blades, STOP engine, and STOP machine if anyone

enters the area.

8. Check shields, deflectors, switches, blade controls and

other safety devices frequently for proper operation and

location.

9. Make sure all safety decals are clearly legible. Replace if

damaged.

10. Protect yourself when mowing and wear safety glasses,

a dust mask, long pants and substantial footwear.

11. Know how to STOP blades and engine quickly in

preparation for emergencies.

12. Use extra care when loading or unloading the machine

into a trailer or truck.

13. Check grass catcher components frequently for signs

of wear or deterioration and replace as needed to prevent

injury from thrown objects going through weak or worn

spots.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme

care in handling gasoline. Gasoline is extremely flammable

and the vapors are explosive.

1. Extinguish all cigarettes, cigars, pipes and other sources

of ignition.

2. Use only an approved fuel container.

3. DO NOT remove fuel cap or add fuel with the engine

running. Allow the engine to cool before refueling.

4. DO NOT refuel the machine indoors.

5. DO NOT store the machine or fuel container inside where

there is an open flame, spark or pilot light such as on a

water heater or other appliances.

6. DO NOT fill fuel containers inside a vehicle or on a

truck or trailer bed with a plastic liner. Always place the

containers on the ground away from the vehicle before

filling.

7. Remove gas-powered equipment from the vehicle or

trailer and refuel it on the ground. If this is not possible,

then refuel equipment using a portable container, rather

than a gasoline dispenser nozzle.

8. DO NOT start gas powered equipment in enclosed

vehicles or trailers.

9. Keep the nozzle in contact with the rim of the fuel tank or

container opening at all times until fueling is complete. DO

NOT use a nozzle lock-open device.

10. If fuel is spilled on clothing, change clothing

immediately.

11. Never overfill a fuel tank. Replace fuel cap and tighten

securely.

Operation

1. Mount and dismount machine from left side. Keep clear

of discharge opening at all times.

2. Start engine from operator’s seat, if possible. Make sure

blades are OFF and parking brake is set.

3. DO NOT leave machine with engine running. STOP

engine, STOP blades, SET brake, and remove key before

leaving operators position of any reason.

4. DO NOT operate machine unless properly seated with

feet on feet rests or pedal(s).

! !

Important Operator Safety Instructions (Continued)

Not for

Reproduction

14 murray.com

Operation

(Continued from Previous Page)

5. STOP BLADES and ENGINE and make sure blades have

stopped before removing grass catcher or unclogging

mower to prevent loss of fingers or hand.

6. Blades must be OFF except when cutting grass. Set

blades in highest position when mowing over rough

ground.

7. Keep hands and feet away from rotating blades

underneath deck. DO NOT place foot on ground while

BLADES are ON or machine is in motion.

8. DO NOT operate machine without entire grass catcher

or guards in place and working. DO NOT point discharge at

people, passing cars, windows or doors.

9. Slow down before turning.

10. Watch out for traffic when near or crossing roadways.

11. STOP engine immediately after striking an obstruction.

Inspect machine and repair damage before resuming

operation.

12. Operate machine only in daylight or with good artificial

light.

13. Exercise CAUTION when pulling loads. Limit loads to

those you can safely control and attach loads to hitch plate

as specified with MURRAY attachment instructions.

14. On slopes, the weight of the towed equipment may

cause loss of traction and loss of control. When towing,

travel slowly and allow extra distance to stop.

15. DO NOT operate engine in enclosed areas. Engine

exhaust gases contain carbon monoxide, a deadly poison.

16. DO NOT discharge material against a wall or

obstruction. Material may ricochet back towards the

operator.

17. Only use accessories approved by the manufacturer.

See manufacturer’s instructions for proper operation and

installation of accessories.

Towing

1. Tow only with a machine that has a hitch designed for

towing. DO NOT attach towed equipment except at the hitch

point.

2. Follow the manufacturer’s recommendation for weight

limits for towed equipment and towing on slopes.

3. DO NOT allow children or others on towed equipment.

4. On slopes, the weight of the towed equipment may cause

loss of traction and loss of control.

5. Travel slowly and allow extra distance to stop.

Maintenance

1. DO NOT store machine or fuel container inside where

fumes may reach an open flame, spark or pilot light such

as in a water heater, furnace, clothes dryer or other gas

appliance. Allow engine to cool before storing machine

in an enclosure. Store fuel container out of the reach of

children in a well ventilated, unoccupied building.

2. Keep engine free of grass, leaves or excess grease to

reduce fire hazard and engine overheating.

3. When draining fuel tank, drain fuel into an approved

container outdoors and away from open flame.

4. Check brakes frequently; adjust, repair or replace as

needed.

5. Keep all bolts, nuts and screws properly tight. Check that

all cotter pins are in proper position.

6. Always provide adequate ventilation when running

engine. Exhaust gases contain carbon monoxide, an

odorless and deadly poison.

7. Disconnect negative (black) cable from battery before

performing maintenance or service. Cranking engine could

cause injury.

8. DO NOT work under machine without safety blocks.

9. Service engine and make adjustments only when engine

is stopped. Remove spark plug wire(s) from spark plug(s)

and secure wire(s) away from spark plug(s).

10. DO NOT change engine governor speed settings or

overspeed engine.

11. Lubricate machine at intervals specified in manual to

prevent controls from binding.

12. Mower blades are sharp and can cut. Wrap the blades

or wear heavy leather gloves and use CAUTION when

handling them.

13. DO NOT test for spark by grounding spark plug next to

spark plug hole; spark plug could ignite gas exiting engine.

14. Have machine serviced by an authorized MURRAY

dealer at least once a year and have the dealer install any

new safety devices.

15. Maintain or replace safety and instruction labels as

necessary.

16. Use only genuine MURRAY replacement parts to assure

that original standards are maintained.

! !

Important Operator Safety Instructions (Continued)

Not for

Reproduction

15

Safety

International Pictorials

IMPORTANT: Some of the following pictorials are located on your unit or on literature supplied with the product. Before you

operate the unit, learn and understand the purpose for each pictorial.

A - Warning.

B - Shield Eyes. Explosive Gases Can

Cause Blindness Or Injury.

C - No Sparks, Flames or Smoking.

D - Sulphuric Acid Can Cause Blindness

Or Severe Burns.

E - Flush Eyes Immediately With Water.

Get Medical Help Fast.

F - IMPORTANT: Read Owner’s Manual

Before Operating This Machine.

G - WARNING: Thrown Objects. Keep

Bystanders Away. Read User

Instructions Before Operating This

Machine.

H - WARNING: Do Not Use This

Machine On Slopes Greater Than 10

Degrees.

I - DANGER: Keep People, Especially

Children, Away From Unit.

J - DANGER: No Step.

K - DANGER: Keep Feet And Hands

Away From Rotating Blade.

L- DANGER: Keep Hands Away From

Rotating Blade.

M - DANGER: Disconnect Spark Plug

Wire Before Servicing Unit.

N - WARNING: Hot Surface.

O - WARNING: Use Caution When

Connecting Or Disconnecting

Accessories.

P - WARNING: Crushed Fingers.

A - Engine start

B - Lights

C - Engine off

D - Engine on

E - Brake

F - Parking brake

G - Clutch

H - Slow

I - Fast

J - Choke

K - Oil

L - Blade rotation control

M - Raise

N - Fuel

A

B

C

D

E

G

H

F

I

J

K

L

M

N

A

B

C

D

E

G

H

F

I

J

K

L

M

N

P

max 10°

max± 90N max± 150N

O

Not for

Reproduction

16 murray.com

Read and follow the assembly and adjustment

instructions for your mower. All fasteners are in the

parts bag. Do not discard any parts or material

until the unit is assembled.

NOTE: In this instruction book, left and right describe the

location of a part with the operator on the seat.

WARNING: Before doing any assembly or

maintenance to the mower, remove the wire from

the spark plug.

Parts Bag - Contents

The fasteners and other loose parts are shown in Figure 1.

The fasteners are shown full size. The quantity is shown in

brackets [ ].

[2] Carriage bolt (A)•

[2] Wing nut (B)•

[1] Bolt (C)•

[1] Washer (D)•

[2] Knob (E)•

[2] Washer (F)•

[1] Keys & ring (G)•

[1] Terminal cover (H)•

Installing the Seat

How to Install the Seat

1. Carefully remove the plastic bag from the seat. Use the

fasteners shown to install the seat (Figure 2). The wing

bolt (A) and washer (B) are shown at full size.

NOTE: Fasteners may be attached to seat for shipping

purposes, if so remove fasteners before proceeding.

2. Align the holes in the seat hinge (D) to the holes in the

seat (E) (Figure 3). Fasten the seat to the seat hinge

(D) with the wing bolt (A) and washer (B) as shown.

3. Check the operating position of the seat (E). If the seat

(E) needs to be adjusted, loosen the two wing bolts

(A). Slide the seat (E) forward or backward along the

seat adjusting holes (C) as shown. Tighten the wing

bolts (A).

Assembling the Steering Wheel

How to Assemble the Steering Wheel

Tools Required: 3/8" Socket Wrench

Attach the steering wheel as follows:

1. Make sure the front wheels point forward.

2. Slide the bellows (F) over the steering post (G)

(Figure 5).

NOTE: Before attachment of the steering wheel,

make sure that the front wheels point forward and

are straight (H). For proper alignment of the steering

wheel, see Figure 5.

3. Slide the steering wheel (E) onto the steering post (G).

4. Use the screw (A) and washer (B) shown to secure

the steering wheel (Figure 4 and 5). In Figure 4, the

fasteners are shown at full size. Tighten the screw until

snug and then add 1/4 turn. DO NOT over tighten.

5. Attach the cover (C) to the steering wheel (E)

(Figure 5).

6. Some models have an optional decal (D) in the parts

bag. Attach the decal (D) to the center of the steering

wheel (E) as shown.

Maintenance Free Battery

IMPORTANT: Before you attach the battery cables to the

battery, check the battery date. The battery date tells if the

battery must be charged.

1. Check the top and the side of the battery (F) for the

location of the battery date (Figure 7).

2. If the battery (F) is put into service before the battery

date, the battery cables can be attached without

charging the battery (F). See “How to Install the Battery

Cables”.

3. If the battery (F) is put into service after the battery

date, the battery (F) must be charged. See “How to

Charge the Maintenance Free Battery”.

Assembly

Not for

Reproduction

17

How to Charge the Maintenance Free Battery

WARNING: When you charge the battery, do not

smoke. Keep the battery away from any sparks. The

fumes from the battery acid can cause an

explosion.

1. Remove the battery (F) and battery tray (G) (Figure 7).

2. Remove the protective cap from the battery

terminal (D).

3. Use a 12 volt battery charger to charge the battery (F).

Charge at a rate of 6 amperes for one hour. If you do

not have a battery charger, have an authorized service

center charge the battery.

4. Install the battery (F) and battery tray (G). Make sure

the positive (+) terminal (D) is on the left side.

How to Install the Battery Cables

WARNING: To prevent sparks, fasten the red cable

to the positive (+) terminal before you connect the

black cable.

Use the carriage bolt (A) and wing nut (B) shown to install

the battery cables (Figure 6). The fasteners are shown at full

size.

1. Remove the protective cap from the battery

terminal (D) (Figure 7).

2. Fasten the red cable (E) and terminal cover (H) (if

equipped) to the positive (+) terminal (D) with the

carriage bolt (A) and wing nut (B) as shown.

3. Fasten the black cable (C) to the negative (-) terminal

with the fasteners as shown.

IMPORTANT! Before You Start Mowing

Check the engine oil.•

Fill the fuel tank with gasoline.•

Check the air pressure of the tires.•

Check the level of the mower housing.•

Make sure the battery cables are attached.•

Make sure the wire is attached to the spark plug.•

WARNING: Before doing any assembly or

maintenance to the mower, remove the wire from

the spark plug.

NOTE: In this instruction book, left and right describe the

location of a part with the operator on the seat.

How to Prepare the Engine

NOTE: The engine was shipped from the factory filled with

oil. Check the level of the oil. Add oil as needed.

NOTE: The operation of a new engine will sometimes result

in a slight amount of smoke. This smoke is caused by paint

or oil on or around the muffler. This is normal and only

expected during initial operation.

A separate engine manual is also included with the unit. See

this engine manual for the manufacturer’s instructions for

the type of gasoline and oil to use. Before you use the unit,

read the information on safety, operation, maintenance, and

storage.

WARNING: Follow the engine manufacturer’s

instructions for the type of gasoline and oil to use.

Always use a safety gasoline container. Do not

smoke when adding gasoline to the engine. When

inside an enclosure, do not fill with gasoline.

Before you add gasoline, stop the engine. Let the

engine cool for several minutes.

IMPORTANT: This unit is equipped with an internal

combustion engine and must not be used on or near any

unimproved forest-covered, brush-covered or grass-covered

land unless the engine’s exhaust system is equipped with a

spark arrester meeting applicable local or state laws (if any).

If a spark arrester is used, it must be maintained in effective

working order by the operator.

In the State of California the above is required by law

(Section 4442 of the California Public Resources Code).

Other states may have similar laws. Federal laws apply on

federal lands. See an Authorized Service Center for a spark

arrester for the muffler.

In some areas, local law requires the use of a resistor spark

plug to control the ignition signals. See an Authorized

Service Center for a resistor spark plug for the engine.

NOTE: Actual sustained horsepower will likely be lower due

to operating limitations and environmental factors.

Not for

Reproduction

18 murray.com

Check the Tires

NOTE: The tires may be over inflated for shipment.

Check the air pressure in the tires. Tires with too much air

pressure will cause the unit to ride rough. Also, the wrong

air pressure will keep the mower housing from cutting level.

Recommended air pressure is 14 PSI (1 BAR).

Check the Level of the Mower Housing

Make sure the level of cut is still correct. After you mow a

short distance, look at the area that was cut. If the mower

housing does not cut level, see the instructions on “How to

Level the Mower Housing” in the Maintenance section of this

manual.

Not for

Reproduction

19

Features and Controls

Features and controls are shown in Figure 8.

Throttle Control / Choke Control (A) — Throttle control

increases or decreases the speed of the engine. Choke

control engages the choke to start a cold engine. (Note: On

some models, the choke control is incorporated into the

throttle control lever. Other models have a separate choke

control knob located below the throttle control.)

Brake Pedal (B) — Use the brake pedal to quickly stop the

forward or reverse motion of the unit.

Lift Lever (C) — Use the lift lever to change the height of

cut.

Ignition Key Switch (D) — Use the ignition key switch to

start and stop the engine. (Note: The headlight switch is

incorporated into the ignition switch.)

Blade Rotation Control (E) — Use the blade rotation control

to start and stop the rotation of the blade.

Parking Brake Lever (F) — Use the parking brake lever to

engage the brake when you leave the unit.

Speed Control Pedal (G) — Use the speed control pedal to

change the speed and direction of the unit.

Automatic Drive Disconnect (H) (not shown, located behind

the unit) — Use the automatic drive disconnect to disengage

the transmission.

Not for

Reproduction

20 murray.com

Operation

Attachments

This unit can use many different attachments.

For all pull-behind attachments or trailers, the maximum gross

weight is 250 pounds (113 kg). Gross weight is the weight of

the attachment or trailer and any load that might be on or in it.

Do not operate on a slope that is greater than 10 degrees

when using a pull-behind attachment or trailer. Never allow

someone to stand or ride on or in an attachment or trailer.

Electrical Safety System

Operator Presence System (Seat)

The seat has an Operator Presence System to shut off the

engine when the operator leaves the seat. This system is

not intended for regular use in stopping the engine or the

blade(s). Before leaving the seat, move the blade rotation

control to the DISENGAGE position, shift to neutral, set the

parking brake, and stop the engine.

How to Check the Safety Interlock Switches

To check the function of the safety interlock switches, follow

the steps below.

1. Check the blade rotation control switch. Sit in the seat.

Depress the clutch/brake pedal. Move the blade rotation

control to the ENGAGE position. Turn the ignition

switch to the START position. The engine should not

start. If the engine starts, the switch is defective and

must be replaced.

2. Check the clutch/brake switch. Sit in the seat. Move the

blade rotation control to the DISENGAGE position. DO

NOT depress the clutch/brake pedal. Turn the ignition

switch to the START position. The engine should not

start. If the engine starts, the switch is defective and

must be replaced.

3. Check the Operator Presence System switch. DO NOT

sit in the seat. Depress the clutch/brake pedal. Move

the blade rotation control to the DISENGAGE position.

Turn the ignition switch to the START position. The

engine should not start. If the engine starts, the switch

is defective and must be replaced.

Using Controls

How to Use the Throttle Control

Use the throttle control to increase or decrease the speed of

the engine.

CAUTION: Always operate the engine with the throttle

control in the FAST position. If the engine runs for several

minutes at slower than the FAST position, the engine and

transmission will overheat and can be damaged.

1. The FAST position is marked with a detent. For normal

operation and when using a grass bagger, move the

throttle control to the FAST position. For maximum

charging of the battery and for a cooler running engine

and transmission, operate the engine in the FAST

position.

2. For transport and to tow pull behind attachments,

control the ground speed with the speed control pedal.

3. The engine governor is set at the factory for maximum

performance. Do not adjust the governor to increase

the speed of the engine.

How to Use the Blade Rotation Control

The blade rotation control is next to the steering wheel

(Figure 9). Use the blade rotation control to engage the

blade(s) or to operate a snow thrower attachment.

1. Before you start the engine, make sure the blade

rotation control is in the DISENGAGE position (A).

2. Move the blade rotation control to the ENGAGE position

(B) to rotate the blade(s).

NOTE: If the engine stops when you engage the

blade(s), the seat switch is not activated. Make sure

you sit in the middle of the seat. Also, make sure the

wire is connected to the seat switch.

3. Move the blade rotation control to the DISENGAGE

position (A) to stop the blade(s). Before you leave the

operator’s position, make sure the blade(s) has stopped

rotating.

4. Before you ride the unit across a sidewalk or a road,

move the blade rotation control to the DISENGAGE

position (A).

WARNING: Always keep your hands and feet away

from the blade, deflector opening, and the mower

housing when the engine runs.

Not for

Reproduction

La page charge ...

Simplicity OPERATOR'S MANUAL FOR FRENCH MURRAY/YARD KING 46-INCH TRACTORS Manuel utilisateur

Ce manuel convient également à

Simplicity OPERATOR'S MANUAL FOR FRENCH MURRAY/YARD KING 46-INCH TRACTORS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents