VTech C4100 Manuel utilisateur

User’s manual

w w w.v te c hp h o n es .c o m

Models:

LS6181/LS6181-13/

LS6181-15/LS6181-16/

LS6181-17

BC

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on pages 76-77 of this manual.

This manual has all the feature operations and troubleshooting necessary to install

and operate your new VTech telephone. Please review this manual thoroughly to

ensure proper installation and operation of this innovative and feature rich VTech

product. For support, shopping, and everything new at VTech, visit our website at

www.vtechphones.com. In Canada, please visit www.vtechcanada.com.

The ENERGY STAR

®

program (www.energystar.gov) recognizes and

encourages the use of products that save energy and help protect our

environment. We are proud to mark this product with the ENERGY STAR

®

label indicating it meets the latest energy efﬁciency guidelines.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Telephones identified with this logo have reduced noise and interference

when used with most T-coil equipped hearing aids and cochlear implants. The

TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry

Association. Used under license.

Register online to get an additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product online for enhanced warranty support.

Product news

Learn about the latest VTech products.

The Bluetooth

®

word mark and logos are owned by Bluetooth SIG, Inc. and any use

of such marks by VTech Holdings Limited is under license.

VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and

trade names are those of their respective owners.

i

Table of contents

Getting started ............................1

Parts checklist ....................................1

Telephone base installation ................2

Handset battery installation ................3

Handset battery charging ...................4

Are you a new cable or VoIP

subscriber? .....................................5

Did you subscribe to voicemail

service from your telephone

service provider? .............................5

Handset layout ....................................6

Telephone base layout ........................8

Bluetooth .....................................9

Introducing Bluetooth ..........................9

Glossary of terms ............................11

Bluetooth setup .................................12

Add a cell phone ...............................13

Review the cell devices list ...............14

Auto connection ................................14

Download directory ...........................15

Telephone settings ...................16

Using the menu ................................16

Handset ringer volume .....................17

Telephone base ringer volume .........17

Ringer tone .......................................17

Set date and time .............................18

Handset LCD language ....................19

Voicemail number .............................20

Clear voicemail indicators .................21

Key tone ............................................21

Home area code ...............................22

Dial mode .........................................22

Auto answer ......................................23

Quiet mode .......................................23

Telephone operation ................24

Make a home call .............................24

Predial a home call ...........................24

Answer a home call ..........................24

End a home call ................................24

Call waiting on the home line ............24

Make a cell call .................................25

Predial a cell call ...............................25

Answer a cell call ..............................25

End a cell call ...................................26

Call waiting on the cell line ...............26

Answer a cell call while on

a home call ....................................26

Cell phone voicemail ........................26

Answer a home call while on

a cell call .......................................26

Handset speakerphone ....................27

Volume control ..................................27

Mute ..................................................27

Find handset .....................................27

Check voicemail................................28

Website .............................................28

Redial ...............................................28

Temporary ringer silencing ...............29

Temporary tone dialing .....................29

Chain dialing .....................................30

Transfer a call ...................................31

Multiple handset use ................32

Join a call in progress .......................32

Intercom ............................................32

Answer an incoming call during

an intercom call .............................33

Directory ....................................34

About the directory ...........................34

Add a directory entry ........................35

Review directory entries ...................37

Alphabetical search ..........................37

Dial a directory entry ........................38

Edit a directory entry ........................38

Delete a directory entry ....................39

Delete all directory entries ................39

Speed dial .........................................40

Assign a speed dial entry .................40

Reassign a speed dial entry .............40

Dial a speed dial entry ......................41

Delete a speed dial entry ..................41

ii

Table of contents

Caller ID .....................................42

About caller ID ..................................42

Information about caller ID with

call waiting .....................................42

Caller ID log ......................................43

Memory match ..................................43

Missed call indicator .........................44

Review the caller ID log ....................44

View dialing options ..........................45

Dial a caller ID log entry ...................46

Save a caller ID log entry to

the directory ..................................46

Delete caller ID log entries ...............47

Caller ID log screen messages .........47

Answering system settings .....48

Answering system ............................48

Announcement .................................48

Record your own announcement ......48

Play your announcement ..................48

Delete your announcement ..............49

Answer on/off ....................................49

Call screening ...................................50

Number of rings ................................50

Remote access code ........................51

Message alert tone ...........................51

Recording time .................................52

Answering system operation ..53

Answering system and voicemail ......53

Using the answering system and

voicemail together .........................53

Message capacity .............................54

New message indication ...................54

Call screening ...................................55

Call intercept .....................................55

Temporarily turn off the message

alert tone .......................................55

Message playback ............................56

Delete all old messages ...................57

Record, play and delete memos .......57

Message window displays ................58

Remote access .................................59

Appendix ...................................60

Expand your telephone system ........60

Add and register a handset ..............60

Deregister handsets .........................61

Keystroke Table.................................62

Screen messages .............................63

Handset and telephone base

indicators .......................................65

Troubleshooting ................................66

Important safety instructions ............76

Operating range ................................78

ECO mode ........................................78

Maintenance .....................................78

The RBRC

®

seal ...............................79

FCC, ACTA and IC regulations .........80

California Energy Commission

battery charging testing

instructions ....................................81

For C-UL compliance only ................82

Limited warranty ...............................85

Technical speciﬁcations ....................87

Index ..........................................88

1

To purchase a replacement battery or power adapter, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial 1 (800) 267-7377.

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in case it is necessary to ship your telephone for warranty service.

Getting started

Abridged user’s manual Important safety

instructions

Telephone base

Telephone base power adapter

Telephone line cord

Battery compartment cover

Handset

Battery

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Abridged user’s

manual

Important safety

instructions

Getting started

2

Telephone base installation

Install the telephone base as shown below.

Make sure that the electrical outlet is not controlled by a wall switch.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through

your telephone line, you must install a DSL filter between the telephone line cord

and the telephone wall jack. The filter prevents noise and caller ID problems caused

by DSL interference. Contact your DSL service provider for more information about

DSL filters.

• Use only the power adapter supplied with this product. To order a replacement,

visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada,

go to www.vtechcanada.com or call 1 (800) 267-7377.

• The power adapter is intended to be correctly oriented in a vertical or floor mount

position. The prongs are not designed to hold the plug in place if it is plugged into

a ceiling, under-the-table or cabinet outlet.

• Even if you do not subscribe to any conventional telephone service, you can still

use the cell line alone without plugging in a telephone line cord.

CAUTION:

If you subscribe to telephone service from a cable company or a VoIP service provider, contact

your cable/VoIP service provider for more information.

Telephone base

Telephone wall jack

Electrical outlet

(not controlled

by a wall switch)

Telephone base

power adapter

Telephone line cord

A DSL ﬁlter (not included)

is required if you have DSL

high-speed Internet service.

The DSL ﬁlter must be

plugged into the telephone

wall jack.

3

Handset battery installation

Install the battery as shown below.

• If the handset will not be used for a long time, disconnect and remove the battery

to prevent possible leakage.

• To purchase a replacement battery, visit our website at www.vtechphones.com

or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial

1 (800) 267-7377.

Getting started

1. Insert the battery connector securely

into the socket inside the handset

battery compartment.

2. Place the battery with the label

THIS SIDE UP facing up and the wires

inside the battery compartment.

3. Align the cover flat against the

battery compartment, then slide it

towards the center of the handset

until it clicks into place.

4. Charge the handset by placing it in the

telephone base. The CHARGE light

turns on when the handset is charging.

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

• Make sure the installation procedures described above are properly done.

• It may be a wiring problem. If you have changed your telephone service to digital service

from a cable company or a VoIP service provider, the telephone line may need to be

rewired to allow all existing telephone jacks to work. Contact your cable/VoIP service

provider for more information.

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Getting started

4

Handset battery charging

Once you have installed the battery, the screen indicates the battery status (see the

table below).

Battery indicators Battery status Action

The screen is blank, or

displays Put in charger and

flashes.

The battery has no or very

little charge. The handset

cannot be used.

Charge without interruption

(about 30 minutes).

The screen displays

Low battery and flashes.

The battery has enough

charge to be used for a

short time.

Charge without interruption

(about 30 minutes).

The screen displays

HANDSET X.

The battery is charged. To keep the battery charged,

place it in the telephone

base when not in use.

When the battery is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Up to 7 hours

While in speakerphone mode (talking*) Up to 3.5 hours

While not in use (standby**) Up to 5 days

* Operating times vary depending on your actual use and the age of the battery.

** Handset is not charging or in use.

After you install your telephone or power returns following a

power outage, the handset will prompt you to set the date and

time. For instructions, see Set date and time on page 18.

To skip setting the date and time, press CANCEL.

Date: MM/DD/YY

ANS ON

ECO

• For best performance, keep the handset on the telephone base when not in use.

• The battery is fully charged after 11 hours of continuous charging.

• If you place the handset in the telephone base without installing a battery, the

handset displays NO BATTERY.

Getting started

5

Are you a new cable or VoIP subscriber?

If your answer is yes, the existing telephone jacks in your home may no longer

work. Your cable/VoIP service provider uses a different connection, separate from

your old traditional telephone service, to connect the modem/router/terminal adapter

installed in your home.

To allow all existing telephone jacks to work, contact your telephone service

provider for solutions, such as rewiring services (fees may apply).

If your answer is no, your existing telephone jacks will continue to work as normal.

Did you subscribe to voicemail service from your telephone

service provider?

Your telephone has a built-in answering system and supports voicemail feature offered

by your telephone service provider (subscription is required, and fees may apply).

Refer to Answering system and voicemail on page 53 for more details.

To use the built-in answering system:

You may see this online Complete user’s manual on how to record your outgoing

announcement, retrieve messages and other related operations.

To use the voicemail:

To retrieve your voicemail messages, you typically dial an access number provided

by your telephone service provider, and then enter a security code. Contact your

telephone service provider for instructions on how to conﬁgure the voicemail

settings and listen to messages.

Cable or

Internet

NEW

Main

landline

OLD

Modem/Router/

Terminal adapter

Conventional

telephone line jack

Getting started

6

1 – /p /VOLUME

•Press to review the directory when the

phone is not in use (page 37).

•Press to scroll up while in a menu, or in the

directory, caller ID log or redial list.

•While entering names or numbers, press

to move the cursor to the right.

•During a call or message playback, press

to increase the listening volume (page 27

or page 56).

2 –

•Press to make or answer a cell call

(page 25).

•During a home call, press to answer an

incoming cell call when you receive a call

waiting alert (page 26).

3 –

•Press to make or answer a home call

(page 24).

•During a cell call, press to answer an

incoming home call when you receive a

call waiting alert (page 24).

Handset layout

1

2

3

4

5

6

7

13

12

11

10

9

8

Getting started

7

4 – 1

•While reviewing a caller ID log entry, press

repeatedly to add or remove 1 in front of

the telephone number before dialing or

saving it in the directory (page 45).

•Press and hold to set or dial your voicemail

number (page 20).

5 – Dialing keys

•Press to enter numbers or characters.

•Press to answer an incoming call (page 24

or page 25).

6 –

•Press to switch to tone dialing during a call

if you have pulse service (page 29).

7 –

•Press to make a home line call using the

handset speakerphone (page 24).

•Press to answer a call using the handset

speakerphone (page 24 or page 25).

•During a call, press to switch between the

handset speakerphone and the handset

earpiece (page 27).

8 – REDIAL/PAUSE

•Press repeatedly to view the last

10 numbers dialed (page 28).

•While entering numbers, press and hold to

insert a dialing pause.

9 – MENU/SELECT

•Press to show the menu (page 16).

•While in the menu, press to select an item

or save an entry or setting (page 16).

10 – OFF/CANCEL

•During a call, press to hang up (page 24

and page 26).

•While in a menu, press to return to the

previous menu, or press and hold to

return to idle mode, without making

changes (page 16).

•Press to delete digits while predialing

(page 24 and page 25).

•While the phone is ringing, press to

silence the ringer temporarily (page 29).

•Press and hold to erase the missed call

indicator when the handset is not in use

(page 44).

11 – CID/q/VOLUME

•Press to display the caller ID log when

the phone is not in use (page 44).

•Press to scroll down while in a menu, or

in the directory, caller ID log or redial list.

•While entering names or numbers, press

to move the cursor to the left.

•During a call or message playback, press

to decrease the listening volume (page 27

or page 56).

12 –

•Press repeatedly to display other dialing

options when reviewing a caller ID log

entry (page 45).

•Press and hold to set and turn on the

quiet mode, or turn it off (page 23).

13 – MUTE/DELETE

•During a call, press to mute the

microphone (page 27).

•While the phone is ringing, press to

silence the ringer temporarily (page 29).

•While reviewing the redial list, directory or

caller ID log, press to delete an individual

entry (page 28, page 39 and page 47

respectively).

•While predialing, press to delete digits

(page 24 and page 25).

Handset layout

Getting started

8

1 – /ANS ON/OFF

•Press to turn the answering system on or

off (page 49).

2 – /FIND HANDSET

•Press to page the system handset

(page 27).

3 – Message window

•Shows the number of messages, and other

information of the answering system or

telephone base (page 58).

4 – IN USE light

•Flashes quickly when there is an

incoming call.

•Flashes when another telephone sharing

the home line is in use.

•On when the home line is in use.

5 – /REPEAT

•Press to repeat the playing message

(page 56).

•Press twice to play the previous message

(page 56).

6 – /PLAY/STOP

•Press to play messages (page 56).

•Press to stop playing messages (page 56).

7 – X/DELETE

•Press to delete the playing message

(page 56).

•Press twice to delete all old messages

when in idle (page 57).

8 – p /VOL+ and q/VOL-

•Press to adjust the listening volume during

a call or message playback (page 27 or

page 56).

•Press to adjust the telephone base ringer

volume when the base is not in use

(page 17).

9 – CHARGE light

•On when the handset is charging in the

telephone base or charger.

10 – /SKIP

•Press to skip to the next message

(page 56).

11 – /CELL1 light and /CELL2 light

•On when cell phones are successfully

paired and connected to the telephone

base (page 13).

12 – /CELL1 and /CELL2

•Press and hold to pair or replace a cell

phone (page 13).

Telephone base layout

12

11

8

10

9

7

6

5

4

3

2

1

9

Introducing Bluetooth

Your new LS6181 telephone system with Bluetooth wireless technology has the

following features:

• Pair and connect up to a maximum of two cell phones with the telephone base

to make and receive cell calls. Only one cell phone can be active on a call at

a time.

• Make and receive calls using your cell phone plan while utilizing the ease and

comfort of your home telephone system.

• Receive phonebook entries from your cell phone.

IMPORTANT INFORMATION

• Refer to the user's manual of your Bluetooth enabled cell phone for more

information about how that device uses Bluetooth connectivity.

• Bluetooth wireless technology operates within a short range (a maximum of

approximately 30 feet) from the telephone base. Keep connected cell phones

within this range. For optimal performance, keep your cell phone within 15 feet of

the telephone base while using the LS6181 cell line.

• If your cell phone has poor reception in your home, the LS6181 cannot improve

the reception. However, if there is a location in your house with better reception,

you can leave your cell phone at that location while you use the LS6181 cell line.

• If you experience poor sound quality, your cell phone may be too far away from

the telephone base. To improve Bluetooth signal strength, place your cell phone

closer to the telephone base (within 15 feet) and make sure that there are no

physical obstacles between the telephone base and the cell phone, such as large

furniture or thick walls.

Bluetooth

Cellular signal

Less than 15 feet for

optimal performance

LS6181

®

10

Bluetooth

The Bluetooth

®

word mark and logos are owned by Bluetooth SIG, Inc. and any use

of such marks by VTech Holdings Limited is under license.

VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and

trade names are those of their respective owners.

• Charge your cell phone while it is connected to the telephone base. Your cell

phone's battery will discharge faster while it is connected to the telephone base

via Bluetooth wireless technology.

• Monitor your cell phone's usage because minutes are deducted from your cellular

plan for the duration of all cell calls, depending on the terms of your plan.

Refer to Bluetooth setup (page 12) to learn how to set up and manage your

Bluetooth enabled devices. Refer to Telephone operation (page 24) on how

to operate your Bluetooth devices with your new LS6181 telephone system

with Bluetooth wireless technology. Refer to Troubleshooting (page 67) if you

experience difﬁculty using the telephone system.

11

Bluetooth

Glossary of terms

Below are some terms used in this user’s manual to help you become familiar with

using your Bluetooth enabled cell phone and your new LS6181 telephone system.

Bluetooth cell phone - refers to a Bluetooth enabled cellular telephone.

Cell line - the telephone line associated with your cell phone service. On your

LS6181 handset, press to use the cell line.

Connected - when you pair a Bluetooth cell phone to the LS6181, it is

automatically

connected. When a cell phone is connected, 1 and/or 2 displays after on the

handset, and corresponding light on the telephone base turns on. If a cell phone

loses its connection to the telephone base, it must be reconnected before you can

use the cell phone with the LS6181.

Disconnected - when a cell phone is disconnected, the status icon (

1

/

2

) on the

handset no longer displays, the lights on the telephone base turn off.

Discoverable mode - before a Bluetooth enabled device can be paired, it must be

set to this mode. When pairing your cell phone, the telephone base will be set to this

mode. Depending on the manufacturer, this mode is sometimes referred to as Find

Me or Visibility.

Home line - your conventional telephone land line. On your LS6181 handset,

press to use the home line.

Paired device - once a Bluetooth enabled cell phone has been paired with the

telephone base, it appears on the cell devices list. A maximum of two cell phones

can be paired with the telephone base.

Pairing - this refers to the process of Bluetooth enabled cell phone registering

device information with each other. The telephone base must be paired with

the Bluetooth enabled cell phone before it can be used. Depending on the

manufacturer, this is also referred to as Bonding.

PIN - by default, the PIN is 0000 for the telephone base and for most Bluetooth

devices. PIN information may be exchanged between Bluetooth devices before they

can be used. This is also known as a Passkey or Passcode.

12

Bluetooth

Bluetooth setup

To use a Bluetooth enabled cell phone with your LS6181, you must ﬁrst pair and

connect it with the telephone base. All system handsets can be used to make or

answer calls on the cell phone line.

Bluetooth wireless technology operates within a short range (a maximum of

approximately 30 feet). When you pair a Bluetooth cell phone to the telephone

base, make sure your Bluetooth cell phone is close to the telephone base to

maintain sufﬁcient signal strength. For optimal performance, keep your cell phone

within 15 feet of the telephone base while using the cell line.

13

Bluetooth

Add a cell phone

Before you begin, make sure that you have cellular coverage and your Bluetooth

enabled cell phone is not connected to any other Bluetooth devices. Refer to your

cell phone user's manual to learn how to search for or add new Bluetooth devices.

You can pair and connect up to two cell phones to the telephone base. All paired

cell phones are shown on the cell devices list. Only one Bluetooth cell phone can be

on a call at a time.

Once you have paired and connected a device with the telephone base, you do not

need to repeat the procedure again unless you have replaced the paired cell phone

with a new one.

To pair and connect a cell phone:

1. Choose a slot to pair the cell phone. Press and hold

/CELL1 or /CELL2 at the telephone base for about

four seconds until you hear two beeps. The corresponding

light ﬂashes.

2. Turn on the Bluetooth feature of your cell phone. Once your

cell phone ﬁnds your VTech phone (VTech LS6181), press

the appropriate key on your cell phone to continue the

pairing process.

• Your cell phone may prompt you to enter the PIN of the

telephone base. The default PIN of the telephone base

is 0000.

• All cell phones that are connected to the telephone base

are disconnected temporarily until the pairing process

is completed.

3. When the cell phone is successfully paired and connected to

the telephone base, you hear two beeps. The corresponding

light on the telephone base turns on, and the

corresponding status icon (

1

or

2

) displays on the handset.

If you have trouble pairing your cell phone, it may not be compatible with your

LS6181. Check the Bluetooth compatibility list at www.vtechphones.com.

• Make sure there is at least one slot available for you to pair a cell phone.

If both slots are paired, turn off the Bluetooth feature of one of your connected

cell phones.

• The pairing process may take up to one minute. If the pairing process fails,

try again.

• The steps for the pairing process may vary for different cell phones. If this

happens, follow the prompts on your cell phone to complete the pairing process.

HANDSET 1

10:01

AM

ANS ON

ECO

8/20

1

2

14

Bluetooth

Review the cell devices list

1. Press MENU on the handset when it is not in use.

2. Press or to scroll to Bluetooth, then press SELECT.

3. Press or to scroll to Cell devices, then press SELECT.

Auto connection

A cell phone may be disconnected from the telephone base when:

• The Bluetooth feature of your connected cell phone is turned off.

• The power of your cell phone is turned off.

• Your cell phone is not within range of the telephone base.

When the Bluetooth feature or power on the cell phone is turned on, or it moves

within range of the base, the base will try to reconnect to the cell phone.

15

Bluetooth

Download directory

You can download up to 200 directories (phonebooks) to your LS6181 telephone

system via Bluetooth wireless technology. Each downloaded directory are stored in

the handset directory with up to 24 digits for each phone number and 15 characters

for each name.

Before downloading the directory, make sure the cell phone is paired and connected

to the LS6181. Make sure the handset battery is charged for at least 10 minutes.

Place your cell phone next to the telephone base while downloading.

To download a cell phone directory:

1. Press MENU on the handset when it is not in use.

2. Press or to scroll to Bluetooth, then press SELECT.

3. Press or to scroll to Download dir, then press SELECT.

The handset displays Select a device brieﬂy.

• If there is no cell phone paired to the system, the handset

displays Pair cell rst and returns to the previous menu.

4. Press or to scroll to a desired device when necessary,

then press SELECT.

• If the selected device is not available, the handset displays

DX not avail. and then returns to the previous menu.

During the download, the handset ﬂashes Downloading...

All other idle system devices display Downloading...

5. When the downloading process completes or when the

memory is full, the handset displays Entries added: XXX.

Then the handset returns to the Bluetooth menu.

• Certain cell phones do not support SIM card download. If

this is the case, try transferring the contacts from your SIM

card to your cell phone memory first, then download from

your cell phone memory. For more information on how to

transfer contacts from your SIM card to your cell phone

memory, see the user’s manual of your cell phone.

• When downloading the directory from your Bluetooth enabled

cell phone, some data may not transfer. For example, if

you have home, mobile and work numbers for a particular

contact, the three categories may not transfer to your

LS6181.

• For certain cell phones, you may need to press a key on

your cell phone to confirm the directory download.

• For Android and Blackberry cell phones, you may also download your

cell phone directory to your LS6181 via the VTech Contact Share

application. Go to www.vtechphones.com/apps/contact_share for

application download.

Bluetooth

ANS ON

ECO

1

2

Download dir

ANS ON

ECO

1

2

D1: Cell Phone A

ANS ON

ECO

1

2

Downloading...

ANS ON

ECO

1

2

Entries added:

118

ANS ON

ECO

1

2

16

Using the menu

You can only use a cordless handset to change the telephone settings.

In the ringers menu, you can select the ringer tones and adjust the ringer volume

for incoming calls.

In the settings menu, you can change the settings for LCD language, voicemail

number, voicemail indicators, key tone, home area code and dial mode.

Go to Answering system settings from page 48 to page 52 for instructions to

modify the answering system settings.

To enter the handset menu:

1. Press MENU when the phone is not in use.

2. Press or until the screen displays the desired

feature menu.

3. Press SELECT to enter that menu.

• To return to the previous menu, press CANCEL.

• To return to idle mode, press and hold CANCEL.

Telephone settings

La page charge ...

VTech C4100 Manuel utilisateur

VTech C4100 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents