Samsung MX-HS9000 Manuel utilisateur

PREMIUM HI-FI Component System

user manual

MX-HS9000

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service,

please register your product at

www.samsung.com/register

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 1 2014-05-27 오전 11:42:27

Safety Information

• An administration fee may be charged if either

an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user's manual).

you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user's manual).

• The amount of such administration charge will be advised to you before any work or home visit is

carried out.

2 English

Warning

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

This symbol indicates “dangerous voltage”

inside the product that presents a risk of

electric shock or personal injury.

This symbol indicates important

instructions accompanying the product.

WARNING

• To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture.

CLASS 1 LASER PRODUCT

This Compact Disc player is classified as a CLASS

1 LASER product. Use of controls, adjustments

or performance of procedures other than those

specified herein may result in hazardous radiation

exposure.

Complies with 21CFR 1040.10 except for

deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

DANGER :

• VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. AVOID DIRECT EXPOSURE TO

BEAM. (FDA 21 CFR)

CAUTION :

• CLASS 3B VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. AVOID EXPOSURE

TO THE BEAM. (IEC 60825-1)

• THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE. DO NOT OPEN COVER AND DO

NOT REPAIR YOURSELF. REFER SERVICING

TO QUALIFIED PERSONNEL.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

PRODUCTO LÁSER CLASE 1

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 2 2014-05-27 오전 11:42:27

01 Safety Information

3 English

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions

listed below. Keep these operating instructions

handy for future reference.

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer's

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the

polarized or groundingtype plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11. Only use attachment/accessories specified

by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket,

or table specified by the

manufacturer, or sold with

the apparatus.

When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as when the power-supply cord or plug

is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Precautions

• Ensure that the AC power supply in your house

complies with the identification sticker located

on the back of your product.

• Install your product horizontally, on a suitable

base (furniture), with enough space around it for

ventilation (3 - 4 inches/7.5 - 10 cm).

• Do not place the product on amplifiers or other

equipment which may become hot. Make sure

the ventilation slots are not covered.

• Do not stack anything on top of the product.

• Before moving the product, ensure the Disc

Insert Slot is empty.

• To turn off the product completely, disconnect

the AC plug from the wall outlet. Disconnect the

AC plug from the wall outlet if you will leave the

device unused for a long period of time.

• During thunderstorms, disconnect the AC plug

from the wall outlet. Voltage spikes due to

lightning could damage the product.

• Do not expose the product to direct sunlight

or other heat sources. This could cause the

product to overheat and malfunction.

• Protect the product from moisture, excess heat,

and equipment creating strong magnetic or

electric fields (i.e. speakers.).

• Disconnect the power cable from the AC supply

if the product malfunctions.

• Your product is not intended for industrial use. It

is for personal use only.

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 3 2014-05-27 오전 11:42:28

Safety Information

4 English

• Condensation may occur if your product or

disc has been stored in cold temperatures. If

transporting the product during the winter, wait

approximately 2 hours until the product has

reached room temperature before using.

• The batteries used with this product contain

chemicals that are harmful to the environment.

Do not dispose of batteries in the general

household trash.

• Please check the volume level before playing

not to startle the elderly, infirm and pregnant

woman at a sudden loud sound.

• Place the loudspeakers at a reasonable distance

on either side of the system to ensure good

stereo sound.

• Direct the loudspeakers towards the listening

area.

• Do not expose this apparatus to dripping or

splashing. Do not place objects filled with

liquids, such as vases, on the apparatus.

• To turn this apparatus off completely, you must

disconnect it from the wall outlet. Consequently,

the wall outlet and power plug must be readily

accessible at all times.

• Use only a properly grounded plug and

receptacle.

- An improper ground may cause electric shock

or equipment damage. (Class l Equipment

only.)

Disc Storage & Management

• Holding Discs

- Fingerprints or scratches on

a disc may reduce sound and

picture quality or cause skipping.

- Avoid touching the surface of a disc where

data has been recorded.

- Hold the disc by the edges so that fingerprints

will not get on the surface.

- Do not stick paper or tape on the disc.

• Cleaning Discs

- If you get fingerprints or dirt on a

disc, clean it with a mild detergent

diluted in water and wipe with a

soft cloth.

- When cleaning, wipe gently from the inside to

the outside of the disc.

• Disc Storage

`

Do not keep in direct sunlight.

`

Keep in a cool ventilated area.

`

Keep in a clean protection jacket and store

vertically.

Disc and Format Compatibility

This product does not support Secure (DRM)

Media files.

CD-R Discs

• Some CD-R discs may not be playable

depending on the disc recording device (CD-

Recorder or PC) and the condition of the disc.

• Use 650MB/74 minute CD-R discs.

Do not use CD-R discs over 700MB/80 minutes

as they may not be played back.

• Some CD-RW (Rewritable) media may not be

playable.

• Only CD-Rs that are properly "closed" can be

fully played. If the session is closed, but the disc

is left open, you may not be able to fully play the

disc.

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 4 2014-05-27 오전 11:42:29

01 Safety Information

5 English

MP3-CD Discs

• Only CD-R discs with MP3 files in ISO 9660 or

Joliet format can be played.

• MP3 file names should contain no blank spaces

or special characters (. / = +).

• Use discs recorded with a compression/

decompression data rate greater than 128Kbps.

• Only a consecutively written multisession disc

can be played. If there is a blank segment in the

Multisession disc, the disc can be played only

up to the blank segment.

• If the disc is not closed, it will take longer to

begin playback and not all of the recorded files

may play.

• For files encoded in the Variable Bit Rate (VBR)

format,( i.e. files encoded in both low bit rate

and high bit rate - 32Kbps ~ 320Kbps), the

sound may skip during playback.

• A maximum of 999 files can be played per CD.

Supported Audio Formats

File

Extension

Audio

Codec

Sampling

Rate

Bit Rate

*.mp3

MPEG 1 Layer3

16KHz ~

48KHz

80Kbps ~

320Kbps

MPEG 2 Layer3

16KHz ~

48KHz

80Kbps ~

320Kbps

MPEG 2.5 Layer3

16KHz ~

48KHz

80Kbps ~

320Kbps

*.wma

Wave_Format_

MSAudio1

16KHz ~

48KHz

56Kbps ~

128Kbps

Wave_Format_

MSAudio2

16KHz ~

48KHz

56Kbps ~

128Kbps

| NOTES |

✎

Does not support WMA Professional codec.

✎

The above table shows supported sampling

rates and bit rates. Files of not supported

formats may not be played properly.

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 5 2014-05-27 오전 11:42:29

Contents

6 English

SAFETY INFORMATION

2 Warning

3 Precautions

4 Disc Storage & Management

4 Disc and Format Compatibility

5 Supported Audio Formats

GETTING STARTED

7 Front Panel

8 Rear Panel

9 Remote Control

10 Accessories

10 Connecting the Speakers

10 Cautions on Moving the Speakers

10 Attaching the speaker foot

FUNCTIONS

11 The Display function

11 Changing Display mode

11 The DEMO Music function

11 Playing a CD

11 Loading a Compact Disc

11 CD/MP3/CD-R Playback

12 Selecting a Track

12 Searching for a Specific Music Passage on

a CD

12 Repeat One or All Tracks on a CD

13 Playing USB Devices

13 USB Device Playback

13 To Select a File from a USB Device

14 To Use High Speed Search

14 To Delete a File

14 To Move to the Next/Previous Folder

14 To safely remove a USB device

14 Read Before Connecting USB Storage

Devices

15 Searching for a Track Quickly

15 Using the Program Function

15 Viewing or Editing Programmed Tracks

16 Bluetooth

16 What is Bluetooth?

16 To connect the Hi-Fi Component to a

Bluetooth device

17 To disconnect the Bluetooth device from

the Hi-Fi Component

17 To disconnect the Hi-Fi Component from

the Bluetooth device

17 Using Bluetooth Power On

18 TV SoundConnect

18 To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung TV

18 To disconnect the TV from the Hi-Fi

Component

18 To disconnect the Hi-Fi Component from

the TV

19 Using My Karaoke

19 Auto Change Function

19 Listening to the Radio

19 To Store the Stations You Want

20 Selecting a Stored Station

20 Timer Function

20 Setting the Clock

20 Setting the Timer

22 Cancelling the Timer

22 The Recording Function

22 Basic Recording

23 Recording Speed

24 Special Sound Effects

24 Selecting EQ Mode

24 FOOTBALL MODE function

24 GOAL Function

25 GIGA SOUND Function

25 BEAT WAVING Function

25 DJ BEAT Function

26 +PANNING Funcion

26 NON-STOP MUSIC RELAY Function

26 DANCE TIME Function

26 TEMPO Function

26 Booting Sound Function

APPENDIX

27 Troubleshooting

28 Specifications

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 6 2014-05-27 오전 11:42:30

02 Getting Started

Getting Started

Front Panel

1

Display Panel

2

FORWARD SEARCH/SKIP button

3

PLAY/PAUSE button

4

TUNER/AUX button

5

EQ button

6

BEAT WAVING button

7

TV SOUNDCONNECT button

8

POWER button

• Press this button to switch your product

on or off.

9

Eject button for Disc

0

SEARCH button

!

VOLUME/SEARCH JOG

@

ENTER button

#

PROGRAM button

$

DISC slot

%

REMOTE CONTROL SENSOR

^

CD/ Bluetooth button

&

STOP button

*

BACKWARD SEARCH/SKIP button

(

MIC jack

)

AUX IN 1 jack

Use to connect an external device such as

an MP3 player.

• Connect AUX IN 1 on the front panel

of the product to the Audio Out of an

external device/MP3 player.

• Press the TUNER/AUX button to select

AUX1.

a

USB REC button

b

+PANNING button

c

DJ BEAT button

d

TEMPO button

e

USB 2 jack for Playing and USB Recording

f

USB 1 jack for Playback only.

g

USB button

h

NON-STOP MUSIC RELAY button

i

DANCE TIME button

j

DJ JOG

k

FOOTBALL MODE button

l

GIGA SOUND BEAT button

m

DISPLAY / DEMO button

ij 5b 6^ 1 43&c * 2

7

9

8l

m

h

k

0#% $) (daefg @ !

7 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 7 2014-05-27 오전 11:42:31

Getting Started

Rear Panel

1

FM Antenna Terminals

1. Connect the FM antenna to the FM

antenna connector terminal.

2.

Slowly move the antenna wire until you find

a location where reception is good, then

fasten it to a wall or other rigid surface.

3.

If reception is poor, you may need to

install an outdoor antenna. To do so,

connect an outdoor FM antenna to the

FM socket on the rear of the system

using a 75Ω coaxial cable (not supplied).

2

ONLY FOR SERVICE

• This jack is for testing only. Please do

not use.

3

AUX IN 2 Terminals

1.

Use an Audio Cable (not supplied) to

connect AUX IN 2 on the product to Audio

Out on an external analog output device.

• Be sure to match connector colors.

• If the external analog output device has

only one Audio Out jack, connect either

left or right.

• Press the TUNER/AUX button to select

AUX 2.

• If the product is in AUX mode for more

than eight hours and no buttons on the

front panel or remote are pushed, the

system will turn off.

4

LED Terminals for Speaker Beat

Waving.

5

2.2 CH Speaker Terminals

1. To achieve the correct sound quality,

when you connect the speakers, match

the color of the speaker plugs to the

color of the speaker jacks. See below.

• LEFT channel (marked

, White/Purple).

• RIGHT channel (marked

, Red/Purple).

• Don't force the Purple SUBWOOFER

connector into the White or Red speaker

jack.

6

Cooling fan

• The fan operates while the unit is

powered on.

If you set the unit to the minimum

volume, the fan won't operate.

Secure a minimum 6 inches (15 cm) of

clear space on all sides of the fan when

installing the product.

7

POWER

• Insert only the provided power cable.

23 4 5 6 7

1

8 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 8 2014-05-27 오전 11:42:31

02 Getting Started

Installing Batteries In The Remote Control

• Place batteries in the remote control so they

match the polarity of the illustrations in the

battery compartment. : (+) to (+) and (–) to (–).

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or overheat

the batteries.

• There is a danger of explosion if the battery is

replaced with the wrong battery type.

• The remote control can be used up to

approximately 23 feet (7 meters) in a straight

line from the system.

Remote Control

Power

Bluetooth

TUNING MODE

PLAY/PAUSE

TIMER SET

MY KARAOKE

CD

USB

TUNER/AUX

NON-STOP MUSIC RELAY

TEMPO

STOP

FOOTBALL

EQ

PROGRAM

TIMER ON/OFF

DISPLAY

MIC VOLUME –, +

AUTO CHANGE

BEAT WAVING

TV SoundConnect

REC SPEED

MO/ST

DJ BEAT

EFFECT LEVEL

REPEAT

GOAL

DANCE TIME

DELETE

SLEEP (Set a sleep time to shut off the

product.)

TUNING/ALBUM

,

.

SEARCH

USB REC

+PANNING

GIGA SOUND BEAT

MUTE (Turn off the sound temporarily. Press

again to turn the sound back on.)

SKIP

VOLUME (–, +)

9 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 9 2014-05-27 오전 11:42:32

Getting Started

Accessories

Check for the supplied accessories below.

User Manual Remote Control / Batteries FM Antenna

Power Cable Rubber Foot (4ea)

• Figures and illustrations in this user's manual are provided for reference only and may differ from actual

product appearance.

Connecting the Speakers

Recommended speaker setup.

| IMPORTANT |

✎

The product may not operate properly if it is

subject to shaking or external shocks or if the

speakers are not installed as recommended.

✎

Do not stretch the speaker wires or place a

heavy object on them.

Cautions on Moving the Speakers

• When moving the main unit and speakers, make

sure to separate all connected speaker cables

before.

• When separating the SPEAKERS LIGHTING

cables, press the lock to release the connector

as shown below.

Attaching the speaker foot

Attach the supplied

speaker feet to the

bottom rear corners of

each speaker as shown

in the illustration to

stabilize the speakers

and prevent them from

slipping.

10 English

Rubber

Foot

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 10 2014-05-27 오전 11:42:34

03 Functions

Functions

The Display function

You can view functions available on the

display, adjust the brightness of the display

and set the Display/LED either on or off.

Changing Display mode

Press the DISPLAY/DEMO button on the product.

Each time you press this button, the mode will

change as follows:

• The Dimmer function

The Dimmer function is selected and the display

darkens.

• LED OFF

The Front display LED is turned off while the

dimmer function is working.

• Clock ON

The Clock you set is displayed.

• Display/LED ON

All displays and the LED are turned on.

The DEMO Music function

Press the DISPLAY/DEMO button on the product

or the DISPLAY button on the remote control for

5 seconds to start the Demo mode.

Each time you press either of these buttons, the

mode will change as follows:

DIMMER

;

LED Off (unit/speaker)

;

--:-- [time

display]

;

LED On (unit/speaker)

To cancel the Demo Music mode

• Press the DISPLAY/DEMO button on the

product or DISPLAY button on the remote

control again for 5 seconds.

The DEMO mode is cancelled and the product

turns off.

• Press TUNER/AUX, CD/Bluetooth, or USB

button on the product.

The DEMO mode is cancelled and the mode is

changed to the mode you selected.

| NOTES |

✎

When the DEMO music function is on, only the

POWER (

), VOL, MUTE ( ) buttons and

the buttons mentioned above work.

✎

The DEMO sampler plays for 3 minutes; only

the message remains displayed on the front

panel after its playback.

Playing a CD

Loading a Compact Disc

You can play standard compact discs that

require no adapter.

1. Insert a disc gently into the disc slot with the

disc's label facing up. The disc will be played

automatically.

• You can load or unload compact discs

when the radio, USB, or auxiliary source

function is selected. When you press the

8

button, all the other functions will

change to the CD mode.

• If no buttons are pressed on the product

or remote control for more than 3 minutes

when the product is in Pause mode, it will

change to Stop mode.

• If no buttons are pressed on the product

or remote control for more than 25 minutes

when the product is in Stop mode, the

product will turn off.

CD/MP3/CD-R Playback

| IMPORTANT |

✎

This product is designed to play the following

audio disc types: CD, CD-R, CD-RW.

1. Insert a disc gently into the disc slot with the

disc's label facing up.

2. The disc is played automatically.

• For MP3/WMA file, it may take several

minutes for the product to finish scanning

the disc tracks.

• If you play a file with an English title, the

song title will be shown in the display. (Titles

in other languages can not be displayed.)

• An English-titled track containing a

special character (@, $, *, etc.) will not be

displayed.

Track Indicator

Playtime

Indicator

11 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 11 2014-05-27 오전 11:42:35

Functions

3. To adjust the volume:

• Turn the VOLUME control on the product.

• Press the VOL+ or VOL- button on the

remote control.

The volume level can be adjusted in 31

steps (VOLUME MIN, VOLUME 01 ~

VOLUME 29, and VOLUME MAX).

4. PAUSING PLAYBACK

Main Unit

To pause playback temporarily, press the

button.

Press again to continue playing the disc.

Remote control

To pause playback temporarily, press the

button.

Press the button to continue playing the

disc.

5. To end playing, press the

5

button.

| NOTES |

✎

If no CD is in the disc slot, “NO DISC” appears

on the display.

✎

The quality of MP3/CD-R playback may vary

depending on the condition of the disc or the

condition of the recorder used to create the

disc.

✎

If a disc contains different types of files or

unnecessary folders, you will have problems

with playback.

✎

Gently insert a CD into the disc slot. Do not

apply excessive force.

- Do not apply force to the product or place a

heavy object on the product.

- Do not insert an out-of-spec or oddly

shaped CD (heart shaped, octangular, etc.).

You can damage the product.

- Carefully maintain your CDs.

Selecting a Track

You can select a desired track while the disc is

being played.

To play the previous track

Press the

1

button within 3 seconds after the

current track has started playing.

Press the

1

button twice, 3 seconds or more

after the current track starts playing.

To play the next track

Press the

2

button.

To play the current track from the

beginning

Press the

1

button, 3 seconds after the current

track started playing.

To play the track of your choice

Press the

1

or

2

button to move to a desired

track.

Searching for a Specific Music Passage

on a CD

When listening to a CD, you can quickly search for

a specific music passage on a track.

Forward Search ....................

3

Backward Search .................

4

You can also press and hold the

1

,

2

buttons

on the product to automatically scan for a track.

Repeat One or All Tracks on a CD

You can play a CD or tracks on a CD repeatedly.

1. Press the REPEAT button on the remote

control.

Each time you press this button, the mode

changes as follows:

MP3 : OFF

;

TRACK

;

DIR

;

ALL

;

RANDOM

CD : OFF

;

TRACK

;

ALL

;

RANDOM

12 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 12 2014-05-27 오전 11:42:35

03 Functions

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is

displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

track.

• DIR (DIRECTORY) : Repeatedly plays all

tracks in the selected folder.

• ALL : Repeatedly plays the entire disc.

• RANDOM : Plays tracks in random order.

Playing USB Devices

Connect an external storage device such as a

USB flash memory or external HDD (Hard Disk

Drive) to the product. You can play files in MP3/

WMA format.

USB Device Playback

1. Connect the external USB storage device to

your product.

2. Select the USB mode by pressing the USB

button on the product or the USB button on

the remote control.

3. The first file of the first directory plays

automatically.

4. To stop playing

Press the

5

button to stop playing.

| NOTES |

✎

To remove the USB device

- If you press the

5

button again, you can

remove the USB device safely.

| IMPORTANT |

✎

Do not connect a USB recharger to the USB

port of this product. You can damage the

product.

To Select a File from a USB Device

You can select an MP3 file while the product is

playing.

| NOTES |

✎

If you want to move to the previous/next track,

press the

1

,

2

buttons briefly.

- The unit moves to the previous/next track

within the directory.

- If you press the

1

,

2

buttons more times

than the number of the files in the directory,

the unit moves to the next directory.

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode

changes as follows:

OFF

;

TRACK

;

DIR

;

ALL

;

RANDOM

2. When you want to stop the repeat function,

press the REPEAT button until "OFF" is

displayed.

• OFF : Cancels repeat playback.

• TRACK : Repeatedly plays the selected

file.

• DIR (DIRECTORY) : Repeatedly plays all

files in the selected folder.

• ALL : Repeatedly plays all files.

• RANDOM : Plays files in random order.

| NOTES |

✎

If the file selected to be played is located in a

folder all the files within that folder are played

in random order. If the file selected is located in

the root folder all files will be played in random

order.

13 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 13 2014-05-27 오전 11:42:36

Functions

To Use High Speed Search

You can search a desired section quickly while the

product is playing.

Press the

3

,

4

button.

• Each time you press the button, you move

through the section forward/backward quickly.

| IMPORTANT |

✎

The product does not output sound during a

high speed search.

✎

You can also press and hold the

1

or

2

button on the main unit to automatically scan

for a track.

To Delete a File

You can delete a ﬁle from your USB device.

1. Select a file you want to delete.

2. Press the DELETE button on the remote

control. "DELETE NO" is displayed.

3. Press the DELETE button on the remote

control and “DELETE YES” is displayed.

4. Press the

¬

button. “DELETE END”

appears and deletion is completed.

To Move to the Next/Previous Folder

Press the TUNING/ALBUM

,

/

.

button on the

remote control to move to the previous/next folder.

| NOTES |

✎

When sound files are stored in the root

directory rather than in a folder, press the

TUNING/ALBUM

,

/

.

button to go to the

first TRACK.

To safely remove a USB device

1. Press the

5

button twice while the USB is

playing or press the

5

button once when

play has stopped.

2. When the REMOVE message appears on the

display, remove the USB device.

Read Before Connecting USB Storage

Devices

• Some USB devices may not work properly with

this product.

• This product only supports external HDD`s that

are formatted in the FAT file system.

• USB 2.0 HDDs should be connected to a

separate power source. Otherwise, the USB 2.0

HDDs will not work.

• If multiple USB external storage are connected

together, only the MP3 files in the first HDD will

be played.

• Files with Digital Rights Management (DRM)

are not supported. DRM restricts unauthorized

access to a DRM file so that file is protected

from piracy.

• Even if a file has an .mp3 extension, the file

cannot be played if it is formatted in MPEG layer

1 or 2.

• Do not use an unrecognized USB hub.

• Only the first 15 characters of an audio file name

are shown on the product's display.

• Only removable HDDs with less than 160GB are

supported. Depending on the device, a 160GB-

or more removable HDD may not be supported.

• It can take several minutes for the product to

recognize the files on some USB devices.

• Some USB devices (USB HDDs, in particular)

may cause a delay when moving from track to

track.

• With USB storage devices supporting USB

VER1.1 only, the product may access files

slowly or may not recognize the file properties.

• The maximum electrical current provided by

each USB port to connected USB devices is

0.5A (based on DC 5V).

• If there is no USB connection or STOP mode

lasts for more than 25 minutes, the product will

automatically turn off.

• Some USB devices, digital cameras, USB card

readers, iPods, iPhones, and Smart Phones

may not be supported.

14 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 14 2014-05-27 오전 11:42:36

03 Functions

Searching for a Track Quickly

You can select a track directly without the

1

,

2

button.

CDDA/MP3-CD/USB

1. Press the SEARCH button.

After pressing the SEARCH button, turn

the VOLUME/SEARCH JOG control on the

product to the left or right to select a desired

track.

• You can move to the selected track directly.

2. When searching is done, the track will

automatically start playing.

Using the Program Function

This function is not available during playback of an

MP3-CD/USB.

• You can program the playback order of up to 99

tracks of your choice.

• However, you must stop playing the CD/USB

before selecting tracks.

1. While in CD/USB playback mode, press the

5

button to stop playing the CD/USB.

2. Press the PROGRAM button to display the

message below:

PROG 01 TRACK---

(01= program number, ---= track number)

3. Use the

1

or

2

button or the VOLUME/

SEARCH JOG to move to a desired track.

• Press

1

to move to the previous track.

• Press

2

to move to the next track.

4. Press the

¬

button to confirm your

selection. The selection is stored and

is displayed.

5. To select another track, follow Steps 3 and 4

above.

6. Press the

button to play the programmed

tracks.

7. Press the

5

button to stop playing the

programmed tracks, Press the

5

button

again to cancel playing the programmed

tracks.

• If you eject the disc, CD programming is

cancelled.

If you turn off the product, CD/USB

programming is cancelled.

| NOTES |

✎

CD/USB program play will continue if you try to

switch to another mode.

✎

USB REC, DELETE and TUNING/ALBUM

buttons will not work in Program mode. If

you press such buttons in Program mode,

“PROGRAM PLAY” will be displayed instead.

✎

If a file in the program to be played was not in

a supported format, playback skips to the next

file automatically.

Viewing or Editing Programmed Tracks

You can view and edit a list of programmed tracks.

1. If a programmed track is being played, press

the

5

button once.

2. Press the PROGRAM button twice to display

the message below:

SAVED 01 TRACK002

(01= program number, 002= track number)

3. Repeatedly press the

¬

button until the

desired track is displayed.

4. Press the

1

or

2

button to select a

different track.

5. Press the

¬

button to confirm your

selection.

6. To play the programmed tracks, press the

button.

To repeat

1. Press the REPEAT button.

Each time you press this button, the mode

changes as follows:

OFF

;

TRACK

;

ALL

15 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 15 2014-05-27 오전 11:42:36

Functions

Bluetooth

You can use a Bluetooth device to enjoy music

with high quality stereo sound, all without wires!

What is Bluetooth?

Bluetooth is a technology that enables Bluetooth

compliant devices to interconnect easily with each

other using a short, wireless connection.

• A Bluetooth device may cause noise or

malfunction, depending on usage, when:

- A part of your body is in contact with the

receiving/transmitting system of the Bluetooth

device or the Hi-Fi Component.

- It is subject to electrical variation from

obstructions caused by a wall, corner, or

office partitioning.

- It is exposed to electrical interference from

same frequency-band devices including

medical equipment, microwave ovens, and

wireless LANs.

• Pair the Hi-Fi Component with the Bluetooth

device while they are close together.

• The greater the distance between the Hi-

Fi Component and the Bluetooth device, the

worse the quality. If the distance exceeds the

Bluetooth operational range, the connection is

lost.

• In poor reception areas, the Bluetooth

connection may not work properly.

• The Bluetooth connection only works when

the Bluetooth device and the Hi-Fi Component

are close together. The connection will be

automatically cut off if the Bluetooth device

is out of range. Even within range, the sound

quality may be degraded by obstacles such as

walls or doors.

• This wireless device may cause electric

interference during its operation.

To connect the Hi-Fi Component to a

Bluetooth device

Before you begin, confirm that your Bluetooth

device supports the Bluetooth-compliant stereo

headset function.

1. Press the CD/Bluetooth button of the Hi-

Fi Component to display the BLUETOOTH

message.

• You will see WAIT for a short period of time

and then READY on the front display of the

Hi-Fi Component.

2. Select the Bluetooth menu on the Bluetooth

device you want to connect. (Refer to the

Bluetooth device's user manual.)

3. Select the Stereo headset menu on the

Bluetooth device.

• You will see a list of scanned devices.

4. Select "[Samsung] HI-FI XXXXXX" from the

list.

• When the product is connected to

the Bluetooth device, it will display

CONNECTED

;

BLUETOOTH on the

front display.

• If the Bluetooth device has failed to pair

with the product, delete the previous

“[Samsung] HI-FI XXXXXX” found by the

Bluetooth device and have it search for the

product again.

5. You can listen to the music playing on the

connected Bluetooth device over the Hi-Fi

Component system.

• In Bluetooth mode, some model's Play/

Stop/Next/Back functions are not available.

| NOTES |

The product only supports Middle Quality

SBC data (up to 237kbps@48kHz), and

does not support High Quality SBC data

([email protected]).

✎

The AVRCP feature is not supported.

✎

Connect only to a Bluetooth device that

supports the A2DP (AV) function.

✎

You cannot connect to a Bluetooth device that

supports only the HF (Hands Free) function.

16 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 16 2014-05-27 오전 11:42:36

03 Functions

✎

Only one Bluetooth device can be paired at a

time.

✎

Once you have turned off the Hi-Fi Component

and the pairing is disconnected, the pairing will

not be restored automatically. To reconnect,

you must pair the device again.

✎

The Hi-Fi Component system may not search

or connect properly in the following cases:

- If there is a strong electrical field around the

Hi-Fi Component.

- If several Bluetooth devices are

simultaneously paired with Hi-Fi Component.

- If the Bluetooth device is turned off, not in

place, or malfunctions.

- Note that such devices as microwave ovens,

wireless LAN adaptors, fluorescent lights,

and gas stoves use the same frequency

range as the Bluetooth device, which can

cause electric interference.

To disconnect the Bluetooth device

from the Hi-Fi Component

You can disconnect the Bluetooth device from

the Hi-Fi Component. For instructions, see the

Bluetooth device's user manual.

• The Hi-Fi Component will be disconnected.

• When the Hi-Fi Component is disconnected

from the Bluetooth device, the Hi-Fi Component

displays DISCONNECTED

;

READY on its

display.

To disconnect the Hi-Fi Component

from the Bluetooth device

Press another mode button on the front panel of

the Hi-Fi Component to switch from Bluetooth

mode to another mode or turn off the Hi-Fi

Component. The currently connected device is

disconnected.

| NOTES |

✎

The connected Bluetooth device will wait a

certain amount of time for a response from

the Hi-Fi Component before terminating the

connection. (Disconnection time may differ,

depending on the Bluetooth device)

✎

In Bluetooth connection mode, the Bluetooth

connection will be lost if the distance between

the Hi-Fi Component and the Bluetooth device

exceeds 16.25 feet (5 meters).

✎

If the Bluetooth device comes back into the

effective range after disconnecting, you can

restart the Hi-Fi Component to restore the

pairing with the Bluetooth device.

✎

The Hi-Fi Component automatically turns off

after 25 minutes in the Ready mode.

✎

When a Bluetooth device is connected to the

Hi-Fi Component system, the Hi-Fi Component

System automatically switches to the Bluetooth

mode if it was in a different mode.

Using Bluetooth Power On

When the product is turned off, you can connect

your smart device to the product via a Bluetooth

connection to turn it on.

1. Press and hold the Bluetooth button on

the remote to set the Bluetooth Power On

function On. Bluetooth Power On appears

on the display.

2. When the product is off, connect your smart

device to the product via Bluetooth. (For

information on Bluetooth connections, refer

to your smart device’s manual.)

3. When the connection is complete, the

product turns itself on automatically in

Bluetooth mode.

• Select the desired music to play from your

smart device.

| NOTES |

✎

Press and hold the Bluetooth button on the

remote control to turn the Bluetooth Power On

function on or off.

Each time you press and hold this button, the

Hi-Fi Component displays Bluetooth Power

On

;

Off on its display.

17 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 17 2014-05-27 오전 11:42:36

Functions

TV SoundConnect

You can listen to the sound from your

SoundConnect Compatible Samsung TV

through the Hi-Fi Component by using the TV

SoundConnect function.

To connect the Hi-Fi Component to a

SoundConnect Compatible Samsung

TV

Before activating this function, be sure to set the

Samsung TV's SoundConnect or SoundShare

function to On.

1. Press the TV SoundConnect button of

the Hi-Fi Component to display the TV

SOUNDCONNECT message.

WAIT

;

SEARCH

;

REQUEST

2. Set Add New Device to On in the TV's

SoundConnect Settings menu. (Refer to the

TV's user manual for details.)

3. When the Hi-Fi Component is connected

to the TV, it will display [TV] Name

;

CONNECTED on the front display.

4. The audio from the connected TV plays over

the Hi-Fi Component system.

| NOTES |

✎

The SoundConnect feature is available on some

Samsung TVs released since 2012. Check

whether your TV supports the SoundShare or

SoundConnect function.

(For further details, refer to the TV's user's

manual.)

✎

If you unplug the Hi-Fi Component, the TV

SoundConnect connection is terminated. To

re-establish the connection, plug the Hi-Fi

Component into an outlet, and then set the TV

SoundConnect connection again.

✎

Only one Hi-Fi Component can be connected

to a TV via TV SoundConnect.

✎

To connect to another TV in TV SoundConnect

at time mode, press the

button for more

than 5 seconds, and then connect to the other

TV by following the directions above.

To disconnect the TV from the Hi-Fi

Component

You can disconnect the TV from Hi- Fi

Component.

For instructions, see the TV's user manual.

• When the Hi-Fi Component is disconnected

from the TV, the Hi-Fi Component displays

DISCONNECTED

;

REQUEST on its display.

To disconnect the Hi-Fi Component

from the TV

Press another mode button on the front panel

of the Hi-Fi Component to switch from TV

SoundConnect mode to another mode or turn off

the Hi-Fi Component. The currently connected

device is disconnected.

| NOTES |

✎

The connected TV will wait a certain amount

of time for a response from the Hi-Fi

Component before terminating the connection.

(Disconnection time may differ, depending on

the TV)

✎

The connection may be lost or sound may

stutter if the distance between the TV and the

Hi-Fi Component exceeds 6.5 feet (2 m).

✎

Instability in the network environment may

cause the connection to be lost or sound to

stutter.

✎

The Hi-Fi Component automatically turns off

after 25 minutes if it is not connected to a TV.

18 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 18 2014-05-27 오전 11:42:36

03 Functions

Using My Karaoke

You can use the MY Karaoke function to sing

along with your favorite CDs and USB tracks.

1. Connect the microphone to the MIC jack on

the front of the product.

• If your microphone plug is smaller than the

6.3mm MIC jack, you need a Connector-

Adaptor (not supplied) to complete the

connection.

- First, connect the Connector-Adaptor to

the MIC jack on the front of the product,

- Second, connect the microphone (with

larger jack) to the Connector-Adaptor.

2. Press the MIC VOL-, + button on the

remote control to adjust the volume of the

microphone.

3. Press the MY KARAOKE button on the

remote control to suppress the vocal if you

need to. Each time you press the button, the

selection changes as follows:

MY KARAOKE ON

;

MY KARAOKE OFF

• If you hear strange noises (squealing or

howling) while using the Karaoke feature,

move the microphone away from the

speakers. Turning down the microphone's

volume or the speaker volume is also

effective. Do not aim the MICROPHONE

towards the SPEAKERS.

• The microphone does not operate in the

AUX and TUNER mode.

• If you connect a microphone, GIGA

SOUND automatically turns off. To turn

Giga Sound back on you must remove

the microphone, and then press the GIGA

SOUND BEAT button.

• When My Karaoke is on, GIGA SOUND

does not work.

• When you turn My Karaoke off, all My

Karaoke settings are lost.

• My Karaoke is only available when a

microphone is connected to the Hi-Fi

Component.

• My Karaoke does not operate in the

Bluetooth, TV SoundConnect, FM and AUX

mode.

Auto Change Function

You can circularly play between the disc and the

USB.

1. Press the AUTO CHANGE button to select a

mode and press

¬

to apply your selection.

• If Program Play has not been set in CD/

USB

AUTO CHANGE OFF

;

AUTO CHANGE ALL

• If Program Play has been set in CD/USB

AUTO CHANGE OFF

;

AUTO CHANGE ALL

;

AUTO CHANGE PROGRAM

• When the AUTO CHANGE mode is "ALL",

- the music will be played on DISC

;

USB1

;

USB2 continuously.

- if you press the POWER button, function

change button or the EJECT button, the

AUTO CHANGE function automatically

switches to "OFF" mode.

- the recording can't work.

- the REPEAT function can't work and

automatically changes to OFF.

- the REC SPEED, USB REC button can't

work.

• When USB is playing, if you disconnected

the USB, the AUTO CHANGE function

automatically switches to "OFF" mode.

• If there's no USB1, it will jump to USB2.

Listening to the Radio

To Store the Stations You Want

You can store up to:

15 FM stations.

1. Select FM by pressing the TUNER/AUX

button.

2. To search for a station, press the TUNING

MODE button on the remote control or the

@

button on the product one or more times until

MANUAL is displayed.

19 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 19 2014-05-27 오전 11:42:36

Functions

3. Find a station by:

• Pressing and holding the TUNING/ALBUM

,

or

.

button on the remote control

to automatically search for broadcasting

stations.

4. Press the MO/ST button to switch between

stereo and mono.

• In a poor reception area, select MONO for

a clear, interference-free broadcast.

• This applies only when listening to an FM

station.

5. If you do not want to store the radio station

found, go back to Step 3 and search for

another station.

Otherwise:

a. Press the

¬

button.

b. Or, press the TUNING/ALBUM button

on the remote control to select a program

number in the PRESET mode.

c. Press the

¬

button to save the preset.

6. To store other radio frequencies, repeat Steps

3 to 5.

| NOTES |

✎

In Tuner mode

- In the Manual mode, you can use the

1

or

2

button or the DJ JOG control.

- In the Preset mode, you can use the

1

or

2

button or the DJ JOG control on the

product to search a stored radio station.

Selecting a Stored Station

To listen to a stored station, follow these steps:

1. Select FM by pressing the TUNER/AUX

button on the product or remote control.

2. Press the TUNING MODE button on the

remote control until “PRESET” is displayed.

3. Press the

1

,

2

buttons on the main unit or

the TUNING/ALBUM

,

.

buttons on the

remote control to select a preset number.

or

Turn the DJ JOG control left or right on the

main unit to select the stored station.

Timer Function

Setting the Clock

For each step, you have a few seconds to set the

required options. If you exceed this time, you must

start again.

1. Press the TIMER SET button on the remote

control twice. "CLOCK SET" is displayed.

2. Press the

¬

button on the remote control.

The hour flashes.

•

To increase the hours: TUNING/ALBUM

,

•

To decrease the hours: TUNING/ALBUM

.

3. When the correct hour is displayed, press the

¬

button, and then the minutes flash.

•

To increase the minutes: TUNING/ALBUM

,

•

To decrease the minutes: TUNING/ALBUM

.

4. When the correct minute is displayed, press

the

¬

button. "TIMER PLAY SET" appears

in the display.

Setting the Timer

The timer enables you to set the product to switch

on or off at specific times automatically.

• Before setting the timer, check that the current

time is correct.

• For each step, you have a few seconds to set

the required options. If you exceed this time,

you must start again.

• If you no longer want the product to be switched

on or off automatically, you must cancel the

timer by pressing the TIMER ON/OFF button.

Example: You want to wake up to

music every morning.

1. Press the TIMER SET button until TIMER

PLAY SET is displayed.

2. Press the

¬

button.

Result: ON TIME is displayed for a few

seconds. You can set the timer switch-on

time.

20 English

[MX-HS9000-ZC]AH68-02687L-04ENG.indd 20 2014-05-27 오전 11:42:36

La page charge ...

Samsung MX-HS9000 Manuel utilisateur

Samsung MX-HS9000 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents