1.
Power On: Press and hold the Power On/Off button for more
than 3 seconds to turn on the speaker. The indicator light will
turn blue and you will hear a beep.
2.
Pairing: Once speaker is turned on, using your mobile device,
search for Bluetooth devices and select Bluetooth
ID 'GEMLINE SPKR'. The speaker will pair automatically.
3.
Power Off: Press and hold the Power On/Off button for more
than 3 seconds to turn off the speaker.
4. Play/Pause: When listening to music, press once to play/
pause music.
5. Next track/Vol +: Press and hold to change music to the
next track. Quickly press to increase volume.
6.
Previous track/Vol -: Press and hold to change music to the
previous track. Quickly press to decrease volume.
7.
AUX: Plug a 3.5mm audio cable into the back of the speaker
in order to play music from a non-Bluetooth enabled device.
3.5mm audio cable not included.
8. Charging: To charge the speaker, plug the included USB
cable into an adapter (adapter not included). The LED
indicator light will display a solid red light when charging.
When fully charged, the red indicator light will turn off.
Operation Instructions
Product dimensions:87*87*80mm
Battery capacity: 3.7V/1800mAh 6.66Wh
Input: DC 5V / 1A
Speaker power 4Ω 5W*1
Frequency 80-18KHZ
Input 5V / 1A
Playback time 4 Hours
Charging time 2.5 Hours
Bluetooth specifications : Bluetooth version 5.0
Transmission distance: up to 10m (This may vary based on
environmental factors or the type of Bluetooth device being
used )
Attention:
1. Please enjoy music with an appropriate volume, which will
avoid to damage your hearing and sound system.
2. Please avoid exposure, rain, water droplets, avoid
prolonged exposure to high temperature, high humidity
environment.
3. During use, please make it away from heat, high pressure,
and prevent children from playing with this product.
4. When the music volume becoming smaller or distorted,
slow, silent, may indicate that the lithium battery power is
shortages, need to be charged.
5. Please use the power which meets the requirements.
6. Do not drop or bump and applied heavy pressure to avoid
damage to the product.
7. Please do not disassemble the product to avoid danger.
8. Long-term not using, please turn off the power and unplug
the charger power cable.
AUDEN ALUMINUM WIRELESS SPEAKER-SILVER
IC ID: 2AGR4-101792
FCC ID: 21530-101792
1. Power ON/OFF / Play/pause
2. Next track/Vol +
3. Previous track/ Vol-
4. Charging and Bluetooth LED
indicator
5. Type C input
6. RESET
7. Aux input
1 2 3
Speaker
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment. This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with I ndustry Canada licence-exempt RSS
standard(s). Operation is subject to the foll owing two conditions:
(1)this device may not cause interference, and(2) this device must
accept any interference, includinginterference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables auxappareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes :(1) l'appareil ne doit
pas produire de brouillage, et(2) l'utilisateur de l'appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre lefonctionnement.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver..
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help
4 5 6
DC-5V RESET AUX IN
2
1
3
4
5 6 7
说明书要求:4C印刷
1. 印刷方式:折页
2. 尺寸:76.2X76.2mm
3. 材质:90g铜版纸
4. 请按照页数正确排版(如123...)
5.双面印刷
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure
requirement. The device can be used installed and operated
with minimum distance 0mm between the radiator and your
body.
L'appareil a été évalué pour répondre aux exigences
générales d'exposition aux RF.Cet équipement doit être
installé et utilisé avec une distance minimale de 0 mm entre
le radiateur et votre corps.