AT&T BL102-5 Guide de démarrage rapide

Quick start guide

BL102/BL102-2/BL102-3/

BL102-4/BL102-5

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

This Quick start guide provides you with basic installation and major

operation instructions. Some features are described in an abridged

form.

Please refer to the online BL102/BL102-2/BL102-3/BL102-4/

BL102-5 DECT 6.0 cordless telephone/answering system with

caller ID/call waiting Complete user’s manual for a full set of

installation and operation instructions at

www.telephones.att.com/manuals.

This telephone system is compatible with certain AT&T DECT 6.0

cordless headsets. Visit

www.telephones.att.com/headsets for a list of

compatible cordless headsets.

For customer service, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268.

Model number: BL102 (one handset)

BL102-2 (two handsets)

BL102-3 (three handsets)

BL102-4 (four handsets)

BL102-5 (five handsets)

Type: DECT 6.0 cordless telephone/answering system

with caller ID/call waiting

Serial number:

Purchase date:

Place of purchase:

Both the model and serial numbers of your AT&T product can be

found on the bottom of the telephone base.

Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

©

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

Parts checklist

Your telephone package contains the following items. Save your

sales receipt and original packaging in the event warranty service

is necessary.

Telephone line cord

Power adapter for

telephone base

Wall-mount bracket

Quick start guide Smart call

blocker leaet

Telephone base

Battery for cordless

handset

(1 for BL102)

(2 for BL102-2)

(3 for BL102-3)

(4 for BL102-4)

(5 for BL102-5)

Cordless handset

(1 for BL102)

(2 for BL102-2)

(3 for BL102-3)

(4 for BL102-4)

(5 for BL102-5)

Charger for cordless handset

with power adapter installed

(1 for BL102-2)

(2 for BL102-3)

(3 for BL102-4)

(4 for BL102-5)

Battery

compartment cover

(1 for BL102)

(2 for BL102-2)

(3 for BL102-3)

(4 for BL102-4)

(5 for BL102-5)

Quick start guide

BL102/BL102-2/BL102-3/

BL102-4/BL102-5

DECT 6.0 cordless telephone/

answering system with

caller ID/call waiting

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT162342/BT262342 (2.4V 300mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine GP1621

Quick start guide

BL102/BL102-2/BL102-3/

BL102-4/BL102-5

DECT 6.0 cordless

telephone/ answering

system with caller ID/

call waiting

Table of contents

For more detailed instructions, refer to the Complete

user’s manual at www.telephones.att.com/manuals.

Getting started

Important safety information .... 1

Safety information ..................... 1

Especially about cordless

telephones .......................................2

Precautions for users

of implanted cardiac

pacemakers .....................................3

Pacemaker patients...................3

ECO mode .........................................3

Especially about telephone

answering systems.....................3

Quick reference guide -

handset ....................................................4

Quick reference guide -

telephone base ................................... 7

Telephone base and charger

installation .............................................8

Telephone base

installation .......................................8

Charger installation ...................9

Battery installation and

charging ................................................ 10

Initial setups ........................................ 12

Set date/time ..............................12

Voice guide to set Smart

call blocker and answering

system ..............................................12

Installation options ....................... 14

Tabletop to wall-mount

installation .................................... 14

Telephone settings

Telephone settings ........................15

Ringer volume .............................15

Ringer tone ....................................15

Set date/time ............................. 16

LCD language ...............................17

Caller ID announce ...................17

Set speed dial voicemail

number ............................................ 18

Voicemail (visual message

waiting) indicator ..................... 19

Clear voicemail indication .... 19

Key tone ..........................................20

Home area code ........................20

Dial mode ........................................ 21

QUIET mode .................................22

Telephone operation

Telephone operation ................... 23

Making a call ................................23

Answering a call .........................23

Ending a call .................................23

Temporary ringer

silencing ..........................................23

Handset speakerphone ........23

Last number redial ..................24

Volume control ..........................24

Call waiting ....................................24

Mute ..................................................25

Handset locator .........................25

Join a call in progress............. 25

Options while on calls .................26

Chain dialing.................................26

Audio Assist

® ...............................26

Multiple handset use

Intercom ............................................... 27

Call transfer using intercom ...28

Directory

Directory ..............................................29

Create a new directory

entry ..................................................29

Review directory entries .....30

Search by name .........................30

Delete a directory entry ......30

Edit a directory entry .............. 31

Caller ID

Caller ID .................................................32

Information about caller ID

with call waiting .........................32

Missed (new) call

indicator ..........................................32

Review the caller ID log ........ 32

View dialing options ............... 33

Dial a caller ID log entry ....... 33

Save a caller ID log entry

to the directory .........................34

Save a caller ID log entry

to the allow list ...........................35

Save a caller ID log entry

to the block list ..........................36

Save a caller ID log entry

to the star name list ............... 37

Smart call blocker

About Smart call blocker* ........ 38

Call categories ............................ 39

Call handling.................................40

Call block settings ..........................42

Set Smart call blocker

on/o ................................................42

Set prole ......................................42

Block list ..........................................44

Allow list ..........................................49

Star name list .............................. 54

Screening announcement ... 57

Allowed calls ......................................60

Blocked calls .......................................61

Screen unknown calls ..................62

Screened call options ............ 63

Screen robocalls .............................65

Option while on a call ..................67

Answering system

Answering system settings .....68

Announcement ..........................68

Answer on/o ............................69

Call screening ..............................70

Number of rings ........................70

Remote access code ............... 71

Message alert tone ..................71

About the answering

system ................................................... 72

Answering system and

voicemail indicators ............... 72

Using the answering

machine and voicemail

together.......................................... 73

Message capacity ..................... 73

Voice prompts ...........................73

Call screening ..............................74

Call intercept ...............................74

Temporarily turning o

the message alert tone ........ 75

Message playback..........................76

Options during playback .....76

Delete all old messages ....... 77

Recording and playing

memos ...................................................78

Record a memo .........................78

Play back a memo ....................78

Remote access ................................. 79

Appendix

Adding and registering

handsets/headsets .......................80

Register a handset to the

telephone base ..........................80

Deregistering handsets .............82

Deregister all handsets

from the telephone base .... 82

Troubleshooting..............................84

Maintenance ......................................90

For C-UL compliance .....................91

Mesures de sécurité

importantes ..................................91

FCC Part 68 and ACTA ................. 95

FCC Part 15 .......................................... 97

Limited warranty ............................98

Technical specications ........... 101

DECT 6.0 digital

technology ..................................101

Telephone operating

range ...............................................101

Redening long range

coverage and clarity .............101

Simulated full-duplex

handset speakerphone ...... 101

Index

Index ...................................................... 102

1

Getting started

Important safety information

This symbol is to alert you to important operating or servicing instructions that may appear in

this user’s manual. Always follow basic safety precautions when using this product to reduce

the risk of injury, re, or electric shock.

Safety information

f Read and understand all instructions in the user’s manual. Observe all markings on

the product.

f Avoid using a telephone during a thunderstorm. There may be a slight chance of

electric shock from lightning.

f Do not use a telephone in the vicinity of a gas leak. Under certain circumstances,

a spark may be created when the adapter is plugged into the power outlet, or

when the handset is replaced in its cradle. This is a common event associated

with the closing of any electrical circuit. In an inadequately ventilated

environment, the user should not plug the phone into a power outlet, nor put a

charged handset into the cradle where there are concentrations of ammable

or ame-supporting gases. A spark in such an environment could create a re

or explosion. Such environments may include: medical use of oxygen without

adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a

leak of natural gas; etc.

f Do not use this product near water or when you are wet. For example, do not

use it in a wet basement or shower, nor next to a swimming pool, bathtub,

kitchen sink, and laundry tub. Do not use liquids or aerosol sprays for cleaning.

If the product comes in contact with any liquid, unplug any line or power cord

immediately. Do not plug the product back in until it has dried thoroughly.

f Install this product in a protected location where no one can trip over any line or

power cords. Protect cords from damage or abrasion.

f If this product does not operate normally, see the Troubleshooting section on

pages 84-88 of this user’s manual. If you cannot solve the problem, or if the

product is damaged, refer to the Limited warranty section on pages 98-100.

Do not open this product except as directed in your user’s manual. Opening the

product or reassembling it incorrectly may expose you to hazardous voltages or

other risks.

f Replace batteries only as described in your user’s manual (pages 10-11). Do

not burn or puncture batteries — they contain caustic chemicals.

f The power adapters are intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

f For pluggable equipment, the socket-outlet shall be installed near the equipment

and shall be easily accessible.

2

Getting started

Important safety information

Cautions:

f Use only the power adapters provided with this product. To obtain a

replacement, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

f Use only the supplied rechargeable battery or replacement battery (model

BT162342/BT262342). To order, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada,

dial 1 (866) 288-4268.

CAUTION: To prevent risk of re or battery explosion, replace with the

correct battery type. Dispose of used batteries according to the instructions.

Especially about cordless telephones

f Privacy: The same features that make a cordless telephone convenient create

some limitations. Telephone calls are transmitted between the telephone base

and the handset by radio waves, so there is a possibility that your cordless

telephone conversations could be intercepted by radio receiving equipment within

range of the cordless handset. For this reason, you should not think of cordless

telephone conversations as being as private as those on corded telephones.

f Electrical power: The telephone base of this cordless telephone must be

connected to a working electrical outlet which is not controlled by a wall switch.

Calls cannot be made from the handset if the telephone base is unplugged,

switched o or if the electrical power is interrupted.

f Potential TV interference: Some cordless telephones operate at frequencies

that may cause interference to TVs and VCRs. To minimize or prevent such

interference, do not place the telephone base of the cordless telephone near

or on top of a TV or VCR. If interference is experienced, moving the cordless

telephone farther away from the TV or VCR will oen reduce or eliminate the

interference.

f Rechargeable batteries: This product contains nickel-metal hydride rechargeable

batteries. Exercise care in handling batteries in order not to create a short

circuit with conductive material such as rings, bracelets and keys. The battery or

conductor may overheat and cause harm. Observe proper polarity between the

battery and the battery charger.

f Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe

manner. Do not burn or puncture. Like other batteries of this type, if burned or

punctured, they could release caustic material which could cause injury.

i

Getting started

3

Important safety information

The RBRC Seal means that the manufacturer is voluntarily

participating in an industry program to collect and recycle

nickel-metal hydride rechargeable batteries when taken out of

service within the United States. These batteries may be taken to

a participating local retailer of replacement batteries or recycling

center. Or you may call 1-800-8-BATTERY for locations accepting

spent Ni-MH batteries.

RBRC and 1-800-8-BATTERY are registered trademarks of the

Rechargeable Battery Recycling Corporation.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless telephones):

Wireless Technology Research, LLC (WTR), an independent research entity, led

a multidisciplinary evaluation of the interference between portable wireless

telephones and implanted cardiac pacemakers. Supported by the U.S. Food and Drug

Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six inches from the pacemaker.

Should NOT place wireless telephones directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

Should use the wireless telephone at the ear opposite the pacemaker.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from other

persons using wireless telephones.

ECO mode

This power conserving technology reduces power consumption for optimal battery

performance. The ECO mode activates automatically whenever the handset is

synchronized with the telephone base.

Especially about telephone answering systems

Two-way recording: This unit does not sound warning beeps to inform the other

party that the call is being recorded. To ensure that you are in compliance with any

federal or state regulations regarding recording a telephone call, you should start the

recording process and then inform the other party that

you are recording the

conversation.

SAVE THESE INSTRUCTIONS

4

Getting started

Quick reference guide - handset

CHARGE indicator

f On when the handset is charging

in the telephone base or charger.

REDIAL/PAUSE

f Press repeatedly to view the last

ten numbers dialed (page 24).

f While entering numbers, press

and hold to insert a dialing pause

(page 29).

pDIR/VOLUME

f Press pDIR to show directory

entries when the handset is not in

use (page 30).

f Press to scroll up while in menus.

f While entering names or

numbers, press to move the

cursor to the right.

f Press to increase the listening

volume when on a call (page

24), or to increase the message

playback volume (page 76).

1

2

qCID/VOLUME

f Press qCID to show caller ID log

when the handset is not in use

(page 32).

f Press to scroll down while in

menus.

f While entering names or numbers,

press to move the cursor to the

le.

f Press to decrease the listening

volume when on a call (page

24), or to decrease the message

playback volume (page 76).

PHONE/FLASH

f Press to make or answer a call

(page 23).

f During a call, press to answer an

incoming call when you receive a

call waiting alert (page 24).

1

2

11

10

12

13

14

3

4

6

5

7

8

9

3

4

Getting started

5

Quick reference guide - handset

5

1

f While reviewing a caller ID log

entry, press repeatedly to add

or remove 1 in front of the

telephone number before dialing

or saving it in the directory

(page 33).

f Press and hold to set or to dial

your voicemail number (page

18).

TONE

f Press to switch to tone dialing

temporarily during a call if you

have pulse service.

/SPEAKER

f Press to make or answer a call

using the speakerphone (page

23).

f Press to switch between the

speakerphone and the handset

(page 23).

MUTE/DELETE

f During a call, press to mute the

microphone (page 25).

f When the handset is ringing,

press to mute the ringer

temporarily (page 23).

f While reviewing the caller ID log,

directory, redial memory, block list,

allow list, or star name list, press to

delete an individual entry.

f While predialing, press to delete

digits.

f During message or

announcement playback, press

to delete the playing message

or the recorded announcement.

Visual ringer indicator

f Flashes when there is an incoming

call.

8

1

2

11

10

12

13

14

3

4

6

5

7

8

9

6

7

9

6

Getting started

Quick reference guide - handset

10

AUDIO ASSIST

®

f Voices will sound louder and

clearer when you press AUDIO

ASSIST

®

while on a call using the

handset (page 26).

MENU/SELECT

f When the handset is not in use,

press to show the menu.

f While in the menu, press to

select an item or save an entry

or setting.

OFF/CANCEL

f During a call, press to hang up

(page 23).

f While in a menu, press to cancel

an operation, back up to the

previous menu, or exit the menu

display; or press and hold this

button to exit to idle mode.

f When the handset is ringing,

press to mute the ringer

temporarily (page 23).

11

12

f Press and hold while the

telephone is not in use to erase

the missed call indicator (page

32).

QUIET# (pound key)

f Press repeatedly to display

other dialing options when

reviewing a caller ID log entry

(page 33).

f Press and hold to enter the

QUIET mode setting screen,

or to deactivate QUIET mode

(page 22).

CALL BLOCK

f Press to block the incoming

call when the telephone is

ringing(page 38) or during

the call (page 67).

f When the handset is not in use,

press to show the Smart call

blocker menu (page 42).

13

14

1

2

11

10

12

13

14

3

4

6

5

7

8

9

Audio Assist

®

is a registered trademark of Advanced American Telephones.

Getting started

7

Quick reference guide - telephone base

/ANSWER ON

f Press to turn the built-in

answering system on or o

(page 69).

/HANDSET LOCATOR

f While the phone is idle, press to

page all handsets (page 25).

Message counter

f Shows the number of

messages or other answering

system information.

/REPEAT

f Press to repeat a message.

f Press twice to play the previous

message (page 76).

IN USE indicator

f On when the handset is in use,

or when the answering system is

answering an incoming call.

f Flashes when another

telephone is in use on the same

line.

f Flashes when there is an

incoming call.

1

2

7

Speaker

Antenna

X/DELETE

f Press to delete the message

currently playing (page 76).

f Press twice to delete all old

messages when the phone is not

in use (page 77).

/PLAY/STOP

f Press to start or stop message

playback (page 76).

q VOL p

f During message playback, press

to adjust the listening volume

(page 76).

f While in idle mode, press to

adjust the base ringer volume.

/SKIP

f Press to skip a message (page

76).

10

11

2

1

3

4

5

9

10

11

8

7

6

3

4

5

6

8

9

8

Getting started

Telephone base and charger installation

Install the telephone base and charger, as shown below.

Telephone base installation

f Raise the antenna.

f Plug one end of the

telephone line cord

into the telephone

jack on the back of

the telephone base.

f Route the power

adapter cord

through this slot.

f Plug the small end of the

telephone base power adapter

into the power adapter jack on

the back of the telephone base.

f Plug the large end of

the telephone base

power adapter into

a power outlet not

controlled by a wall

switch.

f Plug the other end

of the telephone

line cord into a

telephone jack or a

DSL lter.

If you have DSL

high-speed Internet

service, a DSL lter (not

included) is required.

The DSL lter must

be plugged into the

telephone wall jack.

Telephone line cord

Getting started

9

IMPORTANT INFORMATION

f Use only the power adapter(s) supplied with this product. To

order a replacement power adapter, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268. For more detailed

instructions, refer to the online Complete user’s manual at

www.telephones.att.com/manuals.

f The power adapters are intended to be correctly oriented in a

vertical or oor mount position. The prongs are not designed

to hold the plug in place if it is plugged into a ceiling, under-the-

table or cabinet outlet.

Avoid placing the telephone base and charger too close to:

f Communication devices such as television sets, VCRs, or other

cordless telephones.

f Excessive heat sources.

f Noise sources such as a window with trac outside, motors,

microwave ovens, refrigerators, or uorescent lighting.

f Excessive dust sources such as a workshop or garage.

f Excessive moisture.

f Extremely low temperature.

f Mechanical vibration or shock such as on top of a washing

machine or workbench.

Charger installation

Telephone base and charger installation

Plug the power adapter into a

power outlet not controlled by a

wall switch.

10

Getting started

Battery installation and chargingBattery installation and charging

Once you have installed the battery, the screen indicates the Once you have installed the battery, the screen indicates the

battery status (see the following table). For best performance, keep battery status (see the following table). For best performance, keep

the handset in the telephone base or charger when not in use. The the handset in the telephone base or charger when not in use. The

battery is fully charged aer ten hours of continuous charging. See battery is fully charged aer ten hours of continuous charging. See

the table in the the table in the Technical specicationsTechnical specications section on page 101 for section on page 101 for

battery operating times.battery operating times.

Battery indicators Battery status Action

The screen is blank, or

shows Put in charger

and (ashing).

Battery has no or

very little charge. The

handset cannot be used.

Charge without

interruption

(at least 30 minutes).

The screen shows

Low battery and

(ashing).

Battery has enough

charge to be used for a

short time.

Charge without

interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery

charged, place it in the

telephone base or charger

when not in use.

Step 1

Plug the battery connector securely into the socket inside the

handset battery compartment. Insert the supplied battery with the

label THIS SIDE UP facing up, as indicated.

THIS SIDE UP / CE CÔTÉ VERS LE

HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1535

THIS SIDE UP

Getting started

11

Step 2

Align the cover at against the battery compartment, then slide it

upwards until it clicks into place.

Step 3

Charge the handset by

placing it face forward

in the telephone base or

charger. The CHARGE

light on the handset is on

during charging.

IMPORTANT INFORMATION

f Use only the supplied rechargeable battery or replacement

battery (model BT162342/BT262342). To order, visit our website at

www.telephones.att.com or call 1 (800) 222-3111.

In Canada, dial 1 (866) 288-4268. For more detailed

instructions, refer to the online Complete user’s manual at

www.telephones.att.com/manuals.

f If you do not use the handset for a long time, disconnect and

remove the battery to prevent possible leakage

.

Battery installation and charging

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Batter

y Pack

/ Bloc-pi

les

:

BT183342/BT283342 (2.4V

400mAh Ni-MH)

WARNING /

AVERTISS

EM

ENT

:

DO NOT BURN

OR PUNC

TURE BATTER

I

ES.

NE PAS INC

I

NÉRER OU PERC

ER LES PILES.

Made in China /

Fabr

i

qué en chine

CR1535

12

Getting started

Set date/time

Aer you install your telephone or power returns

following a power outage, the handset will prompt

you to set the date and time. For instructions,

see Set date/time on page 16. To skip setting

the date and time, press OFF/CANCEL on the

handset.

Voice guide to set Smart call blocker and answering system

Aer you install your telephone for the rst time, the telephone

base will prompt if you want to set Smart call blocker and answering

system. Follow the voice guide to set or skip the settings.

Voice guide to set Smart call blocker

The telephone base announces, “Hello! This voice guide will assist

you with the basic setup of Smart call blocker...”.

With the voice guide, you can set your Smart call blocker:

f To screen calls with telephone numbers that are not saved in

your directory, allow list or star name list.

- OR -

f Do not screen calls, and allow all incoming calls to get through.

Listen to the instructions to set up your Smart call blocker.

Initial setups

Date: MM/DD/YY

ECO

Time: HH:MM -

-

ECO

Getting started

13

Initial setups

If you intend to set your Smart call blocker to screen all incoming

calls, we recommend that you add the phone numbers of your family

members and friends, and desired businesses to your Directory (see

page 29) or Allow list (see page 49), or add their names to the

Star name list (see page 54). This will avoid Smart call blocker to

screen their calls.

For more details, see Smart call blocker on page 38.

Voice guide to set Answering system

Aer the Smart call blocker setting is done or skipped, the telephone

base will then prompt if you want to set up the answering system.

Listen to the instructions to set up your answering system.

Stop the voice guide

f While the voice guide is playing, press DELETE on the telephone

base.

Restart the voice guide

f On the telephone base, press the keys in the following sequence.

/SKIP — /SKIP — /SKIP — /REPEAT — /REPEAT

— /SKIP — /PLAY/STOP

14

Getting started

Installation options

Your telephone base is ready for tabletop use. If you want to mount

your telephone on a wall, follow the steps to connect the telephone

base with a standard dual-stud telephone wall-mounting plate. You

may need a professional to install the mounting plate.

Tabletop to wall-mount installation

1. Plug the telephone line into the telephone base. If you are using

a DSL lter, plug the other end of the telephone line into the

lter. Route the telephone line cord (or DSL lter) through the

wall-mount bracket hole.

2. Align the holes on the wall-mount bracket with the standard wall

plate and slide the wall-mount bracket down until it locks securely.

3. Position the telephone base, as shown below. Insert the

extended tabs of the wall-mount bracket into the slots on the

back of the telephone base. Push the telephone base down until

it is securely in place.

4. Plug the power adapter into a power outlet not controlled by

a wall switch. Plug the other end of the power adapter into

the telephone base. Bundle the telephone line cord and power

adapter cord neatly with twist ties.

1

3

4

B

A

B

A

2

La page charge ...

AT&T BL102-5 Guide de démarrage rapide

Ce manuel convient également à

AT&T BL102-5 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents