Winmate R17IH3S-MLA1-89 Manuel utilisateur

Rack Mount Panel PC

17”/ 19”/ 24” Touchscreen

Intel® Core™ i7 4650U 3.30 GHz

Military Grade

User Manual

Version 1.0

Document Part No. 9152111I100U

Model No:

R17IH3S-MLA1-89

R19IH3S-MLA3-89

W24IH3S-MLS1-89

USER MANUAL PREFACE

- 2 -

CONTENTS

PREFACE .................................................................................................................................. - 4 -

ABOUT THIS USER MANUAL ................................................................................................... - 11 -

CHAPTER 1: INTRODUCTION ................................................................................................... - 13 -

1.1 Product Features ............................................................................................................ - 13 -

1.2 Hardware Specifications ................................................................................................ - 14 -

1.4 Package Contents ........................................................................................................... - 15 -

1.5 Appearance .................................................................................................................... - 16 -

1.5.1 Appearance ......................................................................................................... - 16 -

1.5.2 On-Screen Display Control .................................................................................. - 17 -

1.6 Dimensions ..................................................................................................................... - 19 -

1.6.1 Dimensions 17” ................................................................................................... - 19 -

1.6.2 Dimensions 19” ................................................................................................... - 20 -

1.6.3 Dimensions 24” ................................................................................................... - 21 -

CHAPTER 2: GETTING STARTED ............................................................................................... - 23 -

2.1 Powering On ................................................................................................................... - 23 -

2.1.1 Power Considerations ......................................................................................... - 23 -

2.1.2 Connecting the Power ......................................................................................... - 24 -

2.2 Connecting Other Devices ............................................................................................. - 26 -

2.2.1 AC Power Connector ........................................................................................... - 26 -

2.2.2 VGA Connector .................................................................................................... - 27 -

2.2.3 RS-232 Connector ................................................................................................ - 28 -

2.2.4 USB 2.0 A Type Connector ................................................................................... - 29 -

2.2.5 LAN Connector..................................................................................................... - 29 -

2.4 Turning ON /OFF ............................................................................................................ - 30 -

CHAPTER 3: MOUNTING ......................................................................................................... - 32 -

3.1 Cable Mounting Considerations .................................................................................... - 32 -

3.2 Safety Precautions ......................................................................................................... - 33 -

3.3 Mounting Guide ............................................................................................................. - 33 -

3.3.1 Console / Rack Mounting .................................................................................... - 33 -

3.3.2 VESA Mounting .................................................................................................... - 35 -

CHAPTER 4: MAINTENANCE .................................................................................................... - 37 -

USER MANUAL PREFACE

- 3 -

4.1 Cleaning the Display Screen ........................................................................................... - 37 -

4.2 Cleaning the Casing ........................................................................................................ - 37 -

CHAPTER 5: DRIVER INSTALLATION ........................................................................................ - 39 -

5.1 Chipset Driver................................................................................................................. - 39 -

5.2 Graphics Driver .............................................................................................................. - 42 -

5.3 Audio Driver ................................................................................................................... - 45 -

5.4 Ethernet Driver .............................................................................................................. - 47 -

5.5 Intel® Management Engine Software ............................................................................ - 50 -

5.6 USB 3.0 Driver Installation (Windows 7) ........................................................................ - 53 -

CHAPTER 6: BIOS SETUP ......................................................................................................... - 58 -

6.1 How and When to Use BIOS Setup ................................................................................ - 58 -

6.2 BIOS Functions ............................................................................................................... - 59 -

6.2.1 Main Menu .......................................................................................................... - 59 -

6.2.2 Advanced Settings ............................................................................................... - 60 -

6.2.3 Chipset Menu ...................................................................................................... - 74 -

6.2.4 Boot Menu ........................................................................................................... - 80 -

6.2.5 Security Menu ..................................................................................................... - 81 -

6.2.6 Save & Exit ........................................................................................................... - 82 -

6.3 Using Recovery Wizard to Restore Computer ............................................................... - 84 -

CHAPTER 7: TECHNICAL SUPPORT ........................................................................................... - 87 -

7.1 Introduction ................................................................................................................... - 87 -

7.1.1 Winmate Download Center ................................................................................. - 88 -

7.1.2 Winmate File Share ............................................................................................. - 88 -

7.2 Problem Report Form .................................................................................................... - 89 -

APPENDIX A: MIL-STD-810F/G COMPLIANCE .......................................................................... - 91 -

APPENDIX B: MIL-STD-461E/F COMPLIANCE ............................................................................... 93

USER MANUAL PREFACE

- 4 -

PREFACE

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W15Axxxxxxxx means October of year 2015.

USER MANUAL PREFACE

- 5 -

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Detailed description of the problem

 The exact wording of error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

USER MANUAL PREFACE

- 6 -

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING! / AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards and

how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave à

la terre incorrecte.

USER MANUAL PREFACE

- 7 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is on.

Sensitive electronic components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges.

As a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

USER MANUAL PREFACE

- 8 -

Safety Precautions

For your safety carefully read all the safety instructions before using the device. All

cautions and warnings on the equipment should be noted. Keep this user manual for

future reference.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work according

to the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

WARNING! / AVERTISSEMENT!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si vous

doutez de leur provenance, contactez le manufacturier.

WARNING!/ AVERTISSEMENT!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge

pas sur vous.

USER MANUAL PREFACE

- 9 -

Important Information

Countries/

Area

Symbol

This equipment complies with essential requirements of:

European

Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "A" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at him own expense.

USER MANUAL PREFACE

- 10 -

European Union

This equipment is in conformity with the requirement of the following EU legislations and

harmonized standards. Product also complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010 EN 55022: 2010 Class B

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2013

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55022: 2010/AC:2011

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

USER MANUAL CONTENTS

- 11 -

ABOUT THIS USER MANUAL

This User Manual provides information about using the Winmate® Military Grade Panel PC (IH32).

The documentation set for the Military Grade Panel PC (IH32) provides information for specific user

needs, and includes:

 Military Grade Panel PC (IH32) User Manual – contains detailed description on how to use

the device, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Document Revision History

Version

Date

Note

1.0

20-June-2016

Initial release

USER MANUAL CHAPTER 1 INTRODUCTION

- 12 -

INTRODUCTION

This chapter gives you product overview,

describes features and hardware specification.

You will find all accessories that come with the

Panel PC in the packing list.

USER MANUAL CHAPTER 1 INTRODUCTION

- 13 -

CHAPTER 1: INTRODUCTION

Thank you for choosing Winmate® Military Grade Panel PC. This series feature low

power high performance CPU with fanless design. Anti-corrosive coating with aluminum

alloy housing withstands the harshest military environments. Armored connectors MIL-

DTL-38999 (type I and III) initially developed for aerospace industry perfectly fit in our

Military grade product line.

Withstanding rigors of harsh environments and tough weather conditions these Panel

PCs meet the most demanding requirements. Suitable for Army Headquarters and being

connected to mobile devices on the field Panel PC can provide up-to-date information

for immediate commands.

1.1 Product Features

Winmate® Military Grade Rack Mount Panel PCs offer the following features:

 Intel® Core™ i7 4650U 3.30GHz processor

 Fanless, streamlined enclosure for highly efficient heat dissipation

 Aluminum housing with anti-corrosive coating

 5-wire resistive touch

 Convenient on-screen display control

 Built-in Light Sensor for auto brightness control

 AC 110~240V Power input (default) with isolation DC 9~36V

(Optional)

 Flush Rack / Rack Mount mechanical design (8U)

 Military Grade connectors (MIL-DTL-38999/1 and 38999/3)

 Compliance with military standard MIL-STD-810G/F

USER MANUAL CHAPTER 1 INTRODUCTION

- 14 -

1.2 Hardware Specifications

Model Name

R17IH3S-MLA1-89

R19IH3S-MLA3-89

W24IH3S-MLS1-89

Display

Size

17”

19”

24”

Resolution

1280 x 1024

1920 x 1200

Brightness

350 cd/



(typ.)

350 cd/



(typ.)

300 cd/



(typ.)

Contrast Ratio

1000:1 (typ.)

Viewing Angle

-85~85(H);-80~80(V)

-89~89(H);-89~89(V)

Display colors

16.7M (colors)

System

Processor

Intel® Core™ i7 4650U 3.30GHz

BIOS

AMI 16Mbit Flash

System Memory

1 x SO-DIMM DDR3L 1600 (Default 4GB)

System Chipset

Intel® HD Graphics 5000

Storage

mSATA SSD (default 64GB)

LAN Controller

Intel® Ethernet Controller 1211-AT + Intel® Gigabit Ethernet PHY 1218-LM

Expansion Slot

1 x Mini PCIe slot (For USB module)

*For PCI expansion customized housing required.

Input/ Output

Plug & Play

VESA DDC 1/2B

Back panel I/O

ports

1 x Power Input (MIL-DTL-38999/1)

1 x VGA (MIL-DTL-38999/3)

1 x RS232 (MIL-DTL-38999/3)

1 x USB 2.0 A Type (MIL-DTL-38999/3)

1 x LAN (MIL-DTL-38999/3)

Environment and Mechanical

Operating Temp.

-20°C to +60°C, wide

temp. by request

-20°C to +60°C, wide

temp. by request

0°C to +50°C, wide

temp. by request

Storage Temp.

-30°C to +70°C

-10°C to +60°C

Operating

Humidity

95%RH ±3%

Power Specifications

Power Input

Default AC 110~240V IN

Optional isolation DC 9~36V IN

Ordering Information (Optional)

Touch

5-wire resistive / 5-wire resistive with EMI coating

Glass

EMI coating glass (Default AR glass)

Storage

mSATA SSD up to 256GB

RAM

SO-DIMM DDR3 1666, up to 8GB

Power

Optional isolation 9~36V DC IN

OS

Windows 10 IoT Enterprise

Windows Embedded 8.1 Industry

Windows Embedded 8 Standard

Windows Embedded Standard 7

USER MANUAL CHAPTER 1 INTRODUCTION

- 15 -

1.4 Package Contents

Carefully remove the box and unpack your device. Please check if all the items listed

below are inside your package. If any of these items are missing or damaged contact us

immediately.

Standard factory shipment list:

Panel PC

User Manual (Hardcopy)

CD-ROM with Driver

Utility

Varies by product

specifications

9152111I100U

IH32: 9171111I102S

Power cord

MIL-DTL-38999/1

VGA Cable

MIL-DTL-38999/3

RS-232 Cable

MIL-DTL-38999/3

94B303003000 (US)

9440131150K1

94G0133090K1

USER MANUAL CHAPTER 1 INTRODUCTION

- 16 -

1.5 Appearance

This section includes appearance and input/ output connectors’ layout.

1.5.1 Appearance

USER MANUAL CHAPTER 1 INTRODUCTION

- 17 -

1.5.2 On-Screen Display Control

On-Screen Display (OSD) is a user-friendly interface to remote the display function and

to adjust the display’s image properties. It also supports special Hot Keys for easy

control, such as auto-adjustment and brightness control for backlight.

1.5.2.1 Control Keys

Icon

Button

Function

Power

Turn ON or turn OFF the Panel PC.

Brightness DOWN

Decrease the brightness of the display screen, or allows

user to navigate items of a single OSD menu.

Brightness UP

Increase the brightness of the display screen, or allows

user to navigate items of a single OSD menu.

Night

Tap this button to enter NIGHT MODE to increase visibility

in low-light conditions.

Day

Tap this button to enter DAY MODE.

Auto/ Manual

Tap the button once to AUTOMATICALLY adjust

brightness mode.

Press the button again to MANUALLY adjust brightness

mode.

Reset

Clear any pending errors or events and brings a system to

normal condition or an initial state.

LOCK

Tap this button to lock the function of OSD panel.

USER MANUAL CHAPTER 1 INTRODUCTION

- 18 -

1.5.2.2 LED Indicators

Indi

cato

r

Color

Definition

PWR

Green

Power is ON and the device functions normally

Orange

Panel PC is suspended

HDD

Green

HDD is active

OFF

HDD is inactive

LOC

K

Red

The function of OSD buttons is locked

OFF

Lock function disabled

USER MANUAL CHAPTER 1 INTRODUCTION

- 19 -

1.6 Dimensions

This section includes mechanical drawing and dimensions of Panel PCs.

1.6.1 Dimensions 17”

Unit: mm

*Tolerance of all dimensions is shown as follow 0~30 mm ± 0.1 mm, 30~50 mm ± 0.15

mm, 50~120 mm ± 0.2 mm, above 120 mm ± 0.25 mm.

USER MANUAL CHAPTER 1 INTRODUCTION

- 20 -

1.6.2 Dimensions 19”

Unit: mm

*Tolerance of all dimensions is shown as follow 0~30 mm ± 0.1 mm, 30~50 mm ± 0.15

mm, 50~120 mm ± 0.2 mm, above 120 mm ± 0.25 mm.

La page charge ...

Winmate R17IH3S-MLA1-89 Manuel utilisateur

Ce manuel convient également à

Winmate R17IH3S-MLA1-89 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents