11
8 Treatment Modes
Depending on the area you wish to treat you can choose between Gliding mode and Precision mode:
Gliding mode enables fast and efficient treatments and is recommended for large skin surface areas
(e.g. legs, arms, chest and back) while Precision mode is recommended for treating sensitive or small,
hard-to reach areas such as knees, shins, ankles, bikini line or underarm and face for females.
The area to be treated has to be hair-free, clean and dry. Before pressing the treatment button, look away
from the device to avoid the bright light.
Gliding mode Precision mode
1. Place the treatment window (1) firmly on your skin, ensuring both skin sensors (2) have skin contact.
Power bars (3) show white LEDs.
2. Press and hold the treatment button (5).
The device will begin to flash.
2. Press and instantly release the treatment
button (5). The device will emit a flash.
3. Move the device slowly and continuously from the
bottom to the top of the treatment area to avoid
missing areas. Make sure to always keep full skin
contact so that the device flashes continuously.
3. Lift off the device and place it onto the next
adjacent spot to be treated. Wait for the
power bars to show white LEDs. Then press
and release the treatment button.
Once you have completed your first gliding stroke, lift
the device off the treatment area. Repeat steps 1 to
3 to treat the next adjacent area in a parallel stroke.
Continue treatment spot by spot until you have
completed the entire area you wish to treat.
Make sure to avoid missed areas by placing the treatment window directly next to the previously
treated spot without leaving any space between treated areas.
If you feel intense pain, stop treatment immediately and consult your physician before using the device again.
Gentle mode
For sensitive areas (or first time users) you may set the device to Gentle mode by pressing the Gentle
mode button (4). The Gentle mode indicator will illuminate to indicate it is activated. You will notice less
Power Bar indicators illuminated when applied to your skin. To de-activate Gentle mode, simply press the
button (4) again. The Gentle mode indicator will go off and the device will return to its standard settings.
Gentle mode reduces the light intensity. More treatments may be required to see the desired effects.
Gentle mode is also recommended when doing the monthly maintenance treatments.
Standby mode
After 10 minutes of inactivity, the device will revert to standby mode (which will be indicated by one blinking
light on the power indicator bars). To return to READY mode, press any key or remove/replace the power cord.
Sleep mode
If the device is not operated (no button push) for 60 minutes, it will enter sleep mode (low power state).
The Power bar LEDs are off. To return to READY mode, press any button or remove/replace the mains
cord. On wake-up the device will follow the standard “power on” procedure (power bars will light up
completely once).
Step 4: Your Treatment Schedule
For optimal results, Silk·expert should be used every week for 12 weeks to ensure all hair follicles are
treated.
After the initial treatment phase (12 weekly treatments), we recommend the device is used once a month,
or as required, to maintain results.
Step 5: Switching Off the Device
When the treatment is finished, unplug the device from the power supply, and the electrical outlet. Refer to
section 9 for details of how best to look after your Silk·expert.
91788398_BD3001-BD3006_CAN.indd 1191788398_BD3001-BD3006_CAN.indd 11 12.03.18 08:1212.03.18 08:12
CSS APPROVED Effective Date 15Mar2018 GMT - Printed 29Mar2018 Page 11 of 30