PROPOINT 9040361 Le manuel du propriétaire

V1.0 9040361

Please read and understand all instructions before use. Retain this manual for future reference.



9040361 6 in. Variable-Speed Bench Grinder V1.0

2 For technical questions call 1-800-665-8685

Voltage rating

120V AC

Amperage rating

2.5A

Frequency rating

60 Hz

Phase

1

Horsepower

1/3 HP

Wheel/Pad size

6 in.

Grit

36 (coarse), 60 (medium)

No load speed

2,000 to 3,450 RPM

Arbor size

1/2 in.

Switch type

On/off with lockout key

Dimensions

15-5/8L x 10W x 11-3/4H in.

Base

8-3/4L x 6-1/4W in.

Weight

27 lb

Certification

CSA#196384

Please familiarize yourself with the hazard notices found in this manual. A

notice is an alert that there is a possibility of property damage, injury or

death if certain instructions are not followed.

DANGER! This notice indicates an immediate and specific hazard that

will result in severe personal injury or death if the proper

precautions are not taken.

WARNING! This notice indicates a specific hazard or unsafe practice that

could result in severe personal injury or death if the proper

precautions are not taken.

CAUTION! This notice indicates a potentially hazardous situation that may

result in minor or moderate injury if proper practices are not

taken.

NOTICE! This notice indicates that a specific hazard or unsafe practice

will result in equipment or property damage, but not

personal injury.

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 3

Take on a variety of grinding, deburring, sharpening, cleaning and material

removal applications with this 1/3 HP bench grinder. It features a no load

speed of 2,000 to 3,450 RMP and includes 2 adjustable tool rests, 2 eye

shields, adjustable lamp and heavy duty base.

WARNING! Read and understand all instructions

before using this tool. The operator must follow

basic precautions to reduce the risk of personal

injury and/or damage to the equipment.

Keep this manual for safety warnings, precautions, operating or inspection

and maintenance instructions.

1. Operate in a safe work environment. Keep your work area clean, well-

lit and free of distractions. Place lights so you are not working in a

shadow.

2. Keep anyone not wearing the appropriate safety equipment away

from the work area.

3. Store tools properly in a safe and dry location. Keep tools out of the

reach of children.

4. Do not install or use in the presence of flammable gases, dust or

liquids.

5. Check work area before each operation to ensure extra equipment,

such as adjusting keys, wrenches, scrap, stock, and cleaning rags are a

safe distance from the tool.

6. Ensure the tool is properly secured to a stable work surface before

operating.

7. Keep the floor surrounding the work area clean and free from any

scrap material, oil and grease.

8. Keep work area child proof by using padlocks, master switches or by

removing starter keys when leaving the area.

9040361 6 in. Variable-Speed Bench Grinder V1.0

4 For technical questions call 1-800-665-8685

WARNING! Wear personal protective equipment

approved by the Canadian Standards

Association(CSA) or American National Standards

Institute(ANSI).

1. Always wear impact safety goggles that provide front and side

protection for the eyes. Eye protection equipment should comply

with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work

performed.

2. Wear the appropriate type of full-face shield in addition to safety

googles, as the work can create chips, abrasive or particulate matter.

3. Wear gloves that provide protection based on the work materials or

to reduce the effects of tool vibration.

3.1 Do not wear gloves when operating a tool that can snag the

material and pull the hand into the tool.

4. Wear protective clothing designed for the work environment and for

the tool.

5. Non-skid footwear is recommended to maintain footing and balance

in the work environment.

6. Wear steel toe footwear or steel toe caps to prevent a foot injury

from falling objects.

7. Wear a NIOSH approved respirator when working on materials that

produce hazardous fumes, dust or particulate matter.

8. This tool can cause hearing damage. Wear hearing protection gear

with an appropriate Noise Reduction Rating to withstand the decibel

levels.

Control the tool, personal movement and the work environment to avoid

personal injury or damage to the tool.

1. Do not operate any tool when tired or under the influence of drugs,

alcohol or medications.

2. Avoid wearing clothes or jewelry that can become entangled with the

moving parts of a tool. Keep long hair covered or bound.

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 5

3. Do not overreach when operating the tool. Proper footing and balance

enables better control in unexpected situations.

4. Support the workpiece or clamp it to a stable platform. Holding the

workpiece by hand or against your body may lead to personal injury.

5. Securely hold this tool using both hands. Using a tool with only one

hand can result in loss of control.

6. Give your work undivided attention. Do not engage in conversations

or other activities while operating.

7. Do not stand on the tool.

8. Obtain advice from supervisors, instructors or other qualified persons

before operating if you are not thoroughly familiar with the tool.

9. Stand to one side when turning the tool on. This will ensure your

safety from loose fragments or parts.

10. Never perform layout, assembly, set up or other work on the tool’s

work bench when the tool is running.

WARNING! DO NOT let comfort or familiarity with

product (gained from repeated use) replace strict

adherence to the tool safety rules. If you use this

tool unsafely or incorrectly, you can suffer serious

personal injury.

1. Use the correct tool for the job. This tool was designed for a specific

function. Do not modify or alter this tool or use it for an unintended

purpose.

2. Do not use the tool if any parts are damaged, broken or misplaced.

Repair or replace the parts.

3. Examine the tool thoroughly before use. This includes inspection of

the machine and the safety guards, the alignment and operation of all

moving parts, the tool’s mounting and other breakage or condition

that may affect its operation.

4. Keep the safety guards and shields in place at all times and properly

adjusted and functioning when the machine is in use.

4.1 Ensure the spark shields are no further than 1/8 in. from the

grinding wheel and adjust as the wheel wears down.

9040361 6 in. Variable-Speed Bench Grinder V1.0

6 For technical questions call 1-800-665-8685

5. Use the tool at its correct speed and feed rate for optimal

performance and safety.

6. Never operate this tool until it has been completely and properly

assembled and installed.

7. Always use the provided blotter and wheel flanges to mount the

grinding wheels on the grinder shaft to prevent wheel damage or

accidental separation, which can result in fragments flying off the

wheel at high speeds.

8. Use only wheels suitable for the speed of the machine.

9. Use only wheels that have a bore exactly equal to the arbors of the

machine. Never attempt to force an undersized wheel to fit an arbor.

10. Do not overtighten the wheel nut.

11. Never use a tool with a cracked or worn grinding wheel. Change the

grinding wheel before using. Use only flanges supplied with the

grinder.

12. Never grind a workpiece on a wheel that is cold. Run the tool for one

full minute before any operation.

13. Do not grind magnesium or aluminum, as a fire may result. Always

clean the wheel between operations involving different materials.

14. Dress the wheel on the face only.

15. Contact a workpiece with the face of the wheel only.

16. Never apply coolant directly to the grinding wheel. Coolant can

weaken the bonding strength of the grinding wheel and cause it to

fail. Dip the workpiece in water to cool it.

17. When operation is complete, always disconnect the tool form its

power source and lock the switch in the off position.

1. Do not use any power tool with a malfunctioning power switch or

control. A power tool that fails to respond to the controls is

dangerous and can cause an injury. A qualified technician must repair

and verify the power tool is operating correctly, before it can be used.

2. Ensure the power supply matches the tool’s motor voltage (see

Specifications).

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 7

3. Do not cover the air vents. Proper cooling is necessary prevent

damage to the tool’s motor.

4. Avoid unintentional starts. Ensure the switch is off when connecting

to the power source.

5. Disconnect the power source before installing or servicing the tool.

6. Remove adjusting keys and wrenches before using the tool. The tool

may eject an attached wrench or a key and cause an injury to you or

to a bystander.

7. Never point the tool towards yourself. It could inflict an injury.

8. Never force the tool. Excessive pressure could break the tool,

resulting in damage to your workpiece or serious personal injury.

Excessive pressure is the cause if your tool runs smoothly under no

load, but roughly under load.

9. Keep hands and fingers away from the work area. Any part of the body

contacting the tool’s working parts could result in an injury.

10. Only use accessories that are specifically designed for use with the

tool. Ensure the accessory is tightly installed.

11. Only use an accessory that exceeds the Speed Rating (see

Specifications).

12. Before using the tool on a workpiece, test the tool by running it at the

highest no-load speed for at least 60 seconds in a safe position. Stop

immediately if there is any abnormal vibration or wobbling that could

indicate poor installation of the grinding wheel. Check the tool to

determine the cause.

12.1 Do not allow the tool to run without load for an extended period

of time, as this will shorten its life.

13. Never touch the tool accessory or workpiece during or immediately after

use. They may be hot and could inflict a burn injury.

14. Do not touch an operating motor. Motors can operate at high

temperatures and can cause a burn injury.

15. Take work breaks to prevent the tool's motor from overheating

and/or overloading. Refer to the welding unit’s duty cycle in

Specifications. Refer to the plasma cutting machine’s duty cycle in

Specifications.

9040361 6 in. Variable-Speed Bench Grinder V1.0

8 For technical questions call 1-800-665-8685

16. Never use a tool with a cracked or worn tool accessory. Change the

tool accessory before using it.

17. Do not start the tool when the tool’s accessory is touching the

workpiece.

WARNING! Do not touch or handle a live tool with

any part of your body that is wet or damp. Wet

skin reduces resistance to electrical current,

increasing the danger of a serious or fatal shock.

WARNING! To reduce risk of electric shock, be

certain that the plug is connected to a properly

grounded receptacle.

1. Disconnect the tool from the power supply before making any

adjustments, changing accessories, cleaning, servicing or when

storing. Such preventive safety measures reduce the risk of starting

the tool accidentally.

2. Protect yourself against electric shocks when working on electrical

equipment. Avoid body contact with grounded surfaces. There is an

increased chance of electrical shock if your body is grounded.

2.1 Hold the tool by the insulated gripping surfaces when

performing an operation where it may contact hidden wiring or

its own cord. Contact with a ‘live’ wire will electrify exposed

metal parts and shock the operator.

2.2 Insulate yourself from the electrical current and ground using

dry insulating mats or covers big enough to prevent physical

contact with the workpiece or ground.

3. Do not disconnect the power cord in place of using the power switch.

This will prevent an accidental start-up when the power cord is

plugged into the power supply.

3.1 In the event of a power failure, unplug the machine as soon as

the power is interrupted. The possibility of accidental injury

could occur if the power returns.

4. Do not alter any parts of the tool or accessories. All parts and

accessories are designed with built-in safety features that may be

compromised if altered.

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 9

5. Make certain the power source conforms to requirements of your

equipment (see Specifications).

6. When wiring an electrically driven tool, follow all electrical and safety

codes, as well as the most recent Canadian Electrical Code (CE) and

Canadian Centre for Occupational Health and Safety (CCOHS).

7. This tool is only for use on 120 V (single phase) and is equipped with

a three-prong grounded power supply cord and plug. Check with a

qualified electrician if you are in doubt as to whether the outlet is

properly grounded. If the tool should electronically malfunction or

break down, grounding provides a low resistance path to carry

electricity away from the user.

7.1 Never remove the grounding prong or modify the plug in any

way, as this will render the tool unsafe.

7.2 Do not use any adapter plugs.

8. A separate electrical circuit should be used for this tool.

8.1 This circuit should not be less than #12 wire and should be

protected with a 20A time lag fuse.

9. If using an extension cord, select one with a 3-wire cord with a 3-

prong grounding plug.

10. All extension cords should be heavy enough to carry the current of

the machine. An undersized cord will cause a drop in voltage,

resulting in loss of power and overheating.

CORD LENGTH

CORD GAUGE

>25

18 AWG

25 to 50

16 AWG

50 to 100

16 AWG

100 to 150

14 AWG

WARNING! All wiring should be performed by a

qualified electrician.

9040361 6 in. Variable-Speed Bench Grinder V1.0

10 For technical questions call 1-800-665-8685

DANGER! Do not use sand or silicate particulate

dust as an abrasive. Sand or silica particulate

dust can result in the lethal lung disease known

as silicosis, when inhaled over a period of time

as short as several weeks or as long as 5 to 10

years. Silicosis causes shortness of breath,

cough, fever and bluish skin (cyanosis). Seek

immediate medical attention if these symptoms

appear. Silicosis can kill you if untreated.

The abrasive blasting process emits abrasive media under pressure that

breaks apart upon impact. The resulting dust is a combination of the

abrasive media and the removed material. Both the media and

the material being removed may have toxic components, such as lead

in paint.

1. Check the abrasive media’s Material Safety Data Sheet (MSDS) for

information on the health risks and preventative measures you can

implement to minimize those risks.

2. Use only abrasives specifically intended for blasting. Never use sand

or silicates.

3. Avoid exposure to hazardous dust created during the blasting

process. Options include ventilation systems to remove or divert the

dust, containment methods such as cabinets or blast-cleaning

machines or working outside. Always check municipal by-laws

regarding abrasive blasting outdoors. Test the air quality to ensure

that exposure is reduced by the chosen option.

4. Never point the abrasive blasting gun at people or animals. Never

point the tool towards yourself. The abrasive media is under pressure

and can cause a physical injury.

5. Test the tool with a low media flow rate to ensure the media does not

ricochet and injure yourself or a bystander.

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 11

WARNING! Do not operate the tool if any part is

missing. Replace the missing part before

operating. Failure to do so could result in a

malfunction and personal injury.

Remove the parts and accessories from the packaging and inspect for damage.

Remove any protective materials and coatings from all of the parts and the tool.

Spray penetrating oil on the surface then wipe away with a soft cloth.

Make sure that all items in the contents are included.

Contents:

• 6 in. grinder (1)

• Grinding shields (2)

• Spark shields (2)

• Flat tool rest (1)

• Beveled tool rest (1)

• Wheel dressing tool (1)

• Tool rest supports (2)

• Coolant tray (1)

• Hardware package: M6 x 16 mm carriage bolts (2), lock washers D6

(2), flat washers D6 (4), eye shield locking knobs (2), tool rest locking

knobs (2), M5 x 10 mm inner hex head screw (4), lock washers D5 (4),

flat washers D5 (4), wrench (1)

A Lamp

B Grinding wheel

C Coolant tray

D On/off switch

E Tool rest

F Spark shield

G Grinding shield

H Wheel guard

9040361 6 in. Variable-Speed Bench Grinder V1.0

12 For technical questions call 1-800-665-8685

Numbered references in parenthesis (#1) refer to the included Parts List.

Letter references in parenthesis (A) refer to the included Identification Key.

Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an

illustration or image.

To attach the spark shields, accomplish the

following (Fig. 1).

1. Fit two M5 x 10 mm hex screws with an M5

lock washer and flat washer.

2. Use the assembled hex screws and washers to

secure the spark shield (F) to the wheel guard

(H). The spark shield should be approximately

1/8 in. from the grinding wheel.

3. Repeat steps 1 and 2 for the second spark shield.

To attach the grinding shields (G), accomplish the following.

1. Insert one of the M6 x 16 mm carriage bolts through the outermost

hole in the spark shield.

2. Secure using one of the M6 flat washers, one lock washer and a

threaded thumb knob.

3. Repeat steps 1 and 2 for the second grinding

shield.

To attach the tool rests (E), accomplish the following

(Fig. 2).

1. Remove the tool rest lock knob (#28), star

washer and washer from the carriage bolt on

the lower portion of the wheel guard.

2. Using the carriage bolt, star washer, washer and

knob, attach the work rest bracket to the inside

of the wheel guard (H).

3. Attach the tool rest (E) to the tool rest support using the lock nut

(#32).

Fig. 1

Fig. 2

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 13

4. Adjust the position of the tool rest support so that the tool rest is

approximately 1/8 in. from the grinding wheel (B).

5. Repeat steps 1 through 4 for the second tool

rest.

This tool comes with convenient on-board tool

storage for the provided dressing tool. It is located

at the rear base of the tool. (Fig. 3-1).

To confirm the tightness of the arbor nuts, which

is recommended before proceeding with any

operation, accomplish the fo llowing (Fig. 4).

1. Remove the screws (#37) securing the outer

face of the wheel guard to the tool frame.

2. Remove the wheel guard (H).

3. Place on hand on the wheel to prevent it

from moving while using a suitable wrench

to tighten the arbor nut (Fig. 5-1).

4. Repeat steps 1 through 3 for arbor not on

the alternate side.

NOTICE! The arbor nut on the

right side of the machine

tightens clockwise, while the

arbor nut on the left side of the machine

tightens counterclockwise.

NOTICE! As you use the tool, the force and

direction of the wheel will cause the arbor nut to

tighten automatically. It is recommended, however,

that you check the tightness of the arbor nut

before each operation.

Fig. 3

Fig. 4

Fig. 5

9040361 6 in. Variable-Speed Bench Grinder V1.0

14 For technical questions call 1-800-665-8685

WARNING! Make sure that the

on/off switch is in the OFF

position before connecting

the tool to its power

source. Do not touch the

metal prongs of the plug

while accomplishing this.

To turn the tool on, accomplish the following.

1. Locate the on/off switch (D) on the front of

the tool’s base (Fig. 6).

2. To turn the tool on, move the switch

upwards (Fig. 7-1). To turn the tool off, move the switch downwards

(Fig. 7-2).

This tool is equipped with a variable speed

control knob (#18), which is located on the front

of the tool’s base next to the on/off switch.

When the knob is fully rotated counterclockwise

(Fig. 8-1) the RPM is 2,000. The speed increases

as you rotate the knob clockwise (Fig. 8-2) to a

maximum of 3,450 RPM.

This tool is equipped with an adjustable lamp

(A) that operates independently from the tool

(Fig. 9).

Fig. 6

Fig. 7

Fig. 8

Fig. 9

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 15

Warning! To reduce the risk of fire, use a 40 watt

or smaller, 120 volt, reflector track type light

bulb (not supplied). A standard household light

bulb should not be used. The reflector track type

light bulb should not extend below the lampshade.

Whenever this tool is not in use, the on/off

switch should be placed in the OFF position.

For longer periods of inactivity or for any

maintenance work, always disconnect the tool

from its power source.

To lock the tool, remove the switch (#15) by

pulling it straight outwards (Fig. 10-1).

The tool cannot be restarted until the switch is reinserted.

1. Maintain the tool with care. A tool in good condition is efficient,

easier to control and will have fewer problems.

2. Inspect the tool fittings, alignment, hoses and power supply cord

periodically. Have damaged or worn components repaired or replaced by

an authorized technician. Only use identical replacement parts when

servicing.

3. Follow instructions for lubricating and changing accessories.

4. Only use accessories intended for use with this tool.

5. Keep the tool clean, dry and free from oil/grease at all times.

6. Maintain the tool’s labels and name plates. These carry important

information. If unreadable or missing, contact Princess Auto Ltd. for

replacements.

7. Always switch the tool off and disconnect from the power source

before performing any inspections or maintenance.

8. If inspecting or maintaining safety guards, remember to always

replace immediately upon completion.

9. Regularly check the tightness of all hardware.

Fig. 10

9040361 6 in. Variable-Speed Bench Grinder V1.0

16 For technical questions call 1-800-665-8685

WARNING! Only qualified service personnel should

repair the tool. An improperly repaired tool may

present a hazard to the user and/or others.

WARNING! The use of accessories and attachments is

not recommended and may result in injury.

Grinding wheels that are used with this tool should meet with the

following specifications:

• Rated for 3,600 RPM or higher

• Width of 1 in.

• Diameter of 6 in.

• Arbor hole of 1/2 in.

• Use only balanced wheels

CAUTION! Using a wheel that is less than 3/4 in.

wide will cause vibration and could damage the

tool.

This tool comes with a diamond-based wheel dresser to keep your

grinding wheels both clean and square.

To dress the grinding wheel, accomplish the

following (Fig 11).

1. Bring the dresser (Fig. 11-1) forward on the

tool rest until it just touches the high point on

the face of the grinding wheel (B).

2. Dress the wheel by moving the dresser back

and forth.

3. Repeat this operation until the face of the

grinding wheel is clean and the edges are

square.

Fig. 11

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 17

To replace or change one of the tool’s grinding wheels, accomplish the

following (Fig. 12, 13 and 14).

1. Remove the screws (#37) securing the outer

face of the wheel guard to the tool frame.

2. Remove the wheel guard (H).

3. Place on hand on the wheel to prevent it

from moving while using a suitable wrench to

loosen the arbor nut (Fig. 13-1).

4. Remove the arbor nut, wheel flange (#39)

and old grinding wheel (B).

1. Use a brush or compressed air to remove

any dust or debris from air passages and

other areas of the tool. Do not use hands.

2. All plastic parts should be cleaned regularly

with a soft, damp cloth. Never use solvents

to clean plastic parts.

Inspect and lubricate the tool when required.

Only use light oil to lubricate the tool. Other

lubricants may not be suitable and could

damage the tool or cause a malfunction during use.

When not in use for an extended period, apply a thin coat of lubricant to

the steel parts to avoid rust. Remove the lubricant before using the tool

again.

NOTICE! NEVER use a penetrating oil to lubricate

the tool. Penetrating oil may act as a solvent

that will break down the grease and cause the tool

to seize up.

Fig. 12

Fig. 13

Fig. 14

9040361 6 in. Variable-Speed Bench Grinder V1.0

18 For technical questions call 1-800-665-8685

Recycle a tool damaged beyond repair at the appropriate facility.

Contact your local municipality for a list of disposal facilities or by-laws for

electronic devices, batteries, oil or other toxic liquids.

IMPORTANT! DO NOT pollute the environment by

allowing uncontrolled discharge of waste oil.

Visit a Princess Auto Ltd. location for a solution if the tool does not

function properly or parts are missing. If unable to do so, have a qualified

technician service the tool.

V1.0 6 in. Variable-Speed Bench Grinder 9040361

Visit www.princessauto.com for more information 19

9040361 6 in. Variable-Speed Bench Grinder V1.0

20 For technical questions call 1-800-665-8685

#

DESCRIPTION

QTY

1

Rubber feet

4

2

Philips pan screw and washer assembly M4 x 8

2

3

Base plate

1

4

Circuit board

1

5

Philips self-tapping screw

2

6

Circuit board cover

1

7

Philips pan screw and spring washer and flat washer assembly

3

8

Toothed lock washer

2

9

Philips pan screw and spring washer assembly

2

10

Lead sheath

3

11

Coolant tray clip

1

12

Philips pan screw

4

13

Coolant tray

1

14

Philips pan screw

4

15

Switch

1

16

Switch guard

1

17

Philips pan screw

4

18

Speed control knob

1

19

Rotary knob pad

1

20

Switch plate

1

21

Speed controller

1

22

Base

1

23

Wheel dressing tool

1

24

Wheel dressing clip

1

25

Hex flange nut

9

26

Wire fixing

1

27

Philips pan screw

1

28

Tool rest lock knob

2

29

Spring washer

2

30

Flat washer

4

31

Right moveable tool rest

1

La page charge ...

PROPOINT 9040361 Le manuel du propriétaire

PROPOINT 9040361 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents