COOSPO BK9 Manuel utilisateur

Taper
Manuel utilisateur
BK9-RTN-I1-2329
ALL ABOUT PASSION
SCAN for more
しくはちら
Cerca altro
Nach mehr SUCHEN
SCANNEZ pour plus
ESCANEAR para más
Bike Speed & Cadence Sensor
USER MANUAL
- 2 -
Standard Accessories
Installation
Cadence Silicone Pad x1
BK9 x1
Please remove the transparent insulation sheet first.
Silicone Strap x2
User Manual x1
USER MANUAL
- 3 -
Install the silicone pad on the back of the sensor, and select
the Silicone Strap that fits the thickness of the crank.
1.
Install the cadence sensor on the inner side of the left crank.
2.
Note: The sensor will go into sleep mode after a period of
inactivity. Please turn the wheel to wake it up before pairing.
Turn the crank to ensure that the cadence sensor and Silicone
Strap do not rub against the bike or shoes.
3.
The blue light on means the device is enabled.
1.
Make sure it is securely installed and not touching or
rubbing against any other parts of the bike to avoid damage
or loss during your ride.
2.
Notes:
Pairing
- 4 -
Turn on the Bluetooth and location
service on your phone.
Note: Do not pair the sensor in the
Bluetooth settings of your phone.
1.
Find the Sensor Settings Menu in cycling app.
For example, go to CoospoRide App > More > Sensors >
Select the sensor or use another app to "Add Device"
2.
Find the BK9 Bluetooth ID and select it in the app to
connect.
3.
Connect to cycling apps (Bluetooth)
Bluetooth
Bluetooth
Bind
Cadence
Cadence
BK9 12345
Sensor
Cycling
Activity
More
XXX
- 5 -
Select "Add Sensor" from the smart device settings menu.
1.
Find BK9 Bluetooth or ANT+ ID and select it to connect.
2.
Connect to smart devices such as
bike computer (Bluetooth and ANT+)
Function and Status
Battery Installed Red and Blue Alternately Flashing
Indicator Light
Sensor Status
Blue Light Flashing
Wake Up
Red Light Flashing
Low Battery Alert
Bike 1
Activate On
Speed
Spd&Cad
Power
Heart Rate Disable
Cadence
Search...
BK9
ID:12345
Bike 1
Activate On
ID 12345
Speed
Spd&Cad
Power
HeartRate
Bike 1
Disable
Disable
Cadence
Disclaimer
The information contained in this manual just for
reference. The product described above may be subject to
alteration owing to the manufacturer's continuing
research and development plans, without making an
announcement in advance.
We shall not make any statement or warranty about this
manual.
- 6 -
Note: The actual battery life depends on the usage environment.
For more information, please refer to www.coospo.com.
Specifications
Battery Type CR2032, 3V
Wireless Transmission Bluetooth 5.0 ; ANT+
Waterproof IP67
BK9
Model
300H
Battery Life
- 7 -
FCC statement
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
- 8 -
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
IC WARNING
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR dInnovation, Sciences
et Développement économique Canada applicables aux
appareils radio exempts de licence. Lexploitation est
autorisée aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d' en compromettre
le fonctionnement.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

COOSPO BK9 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues