SPORTS ART DS972 Le manuel du propriétaire

DS972 Functional Trainer

Owner’s Manual

ISO 9001/14001 Certied GoSportsArt.com 2016.06

Sports Art Industrial Co., Ltd. (Headquarter)

#11, Gong Huan Road,

Tainan City, Taiwan

T: 886 6 3840888

F: 886 6 3840999

[email protected]

Sports Art America Inc.

19510 144th Ave. N.E., Suite A-1,

Woodinville, WA 98072

T: +1 425 4819479

F: +1 425 4888155

[email protected]

Sports Art Fitness UK Ltd.

Unit 2, 3 Charnwood Business Park,

North Road, Loughborough,

LE11 1LE, England

T: +44 1509 274440

[email protected]

Sports Art Europe, Middle East & Africa

Strada Cantonale 42, Ch-6534 San Vittore,

Switzerland

T: +41 91 8273908

F: +41 91 8273910

[email protected]

Sports Art China

Room 2202, BLDG. A, Huapu Garden,

Dongzhimen South Street, No. 9,

Dongcheng District Beijing, 100007 China

T: +86 10 84094122/84094123

F: +86 10 84094121

DS972 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 7

STEP 1 Install the Top Support Frame ................................................... 7

STEP 2 Install the Support Tube and the Connector ............................. 8

STEP 3 Install the Adjustment Pulley and the Adjustment Tube ............ 9

STEP 4 Install the Pulleys .................................................................... 10

STEP 5 Install the Weight Plates .......................................................... 11

STEP 6 Apply the Weight Stack Sticker ................................................ 14

STEP 7 Install Front Cover Set Brackets ............................................... 15

STEP 8 Install Front/Rear Cover Set Plate ............................................ 17

STEP 9 Install the Cable ........................................................................ 18

STEP 10 Install the Rear/Front Cover ................................................... 19

STEP 11 Install the Top Front/Rear Cover ............................................ 21

STEP 12 Install the Hooks .................................................................... 22

STEP 13 Level and Secure the Product ............................................... 23

5. OPERATE THE PRODUCT ............................................................... 24

OPERATION Test the Product .............................................................. 24

OPERATION Operate the Product ........................................................ 26

OPERATION Exercising Instructions .................................................... 27

OPERATION Safety Operating Area ...................................................... 30

6. MAINTENANCE ................................................................................. 31

MAINTENANCE Safety Precautions ...................................................... 31

MAINTENANCE Guide Rod Cleaning and Lubricating .......................... 32

MAINTENANCE Schedule ..................................................................... 33

MAINTENANCE Task List ...................................................................... 34

MAINTENANCE One-Year Maintenance Log ........................................ 35

7. ACCESSORIES .................................................................................. 36

ACCESSORIES Options ......................................................................... 36

8. CONSIGNES DE SÉCURITÉ IMPORTANTES .................................. 37

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the DS972

Functional Trainer. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety

precautions:

• Please read the entire manual before assembly and operation. Make

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assem-

bled, and all fasteners are tightened. Do not use the product if it is disas-

sembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop imme-

diately if an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this

manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is

not working properly, or has been dropped or damaged, contact a service

technician for repairs.

• Do not use accessories or parts that are not specically recommended

by the manufacturer (SportsArt) . Such parts might cause injuries or cause

the unit to fail and void the warranty. We will not be responsible for any

safety issue that arises due to the misuse of accessories or parts. At the

same time, we will terminate the warranty terms of this equipment.

• This product is not intended for use by persons (including children 12

or younger) with reduced physical, sensory, or mental capabilities, or by

people who are otherwise decient in product knowledge or experience. If

such people use this product, they should be given training and be super-

vised at all times by someone responsible for their safety.

• Children 12 or younger should be supervised to ensure that they do not

play on or near the product.

• Maintenance and repair must be performed by trained service person-

nel only.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR

WORKOUT and consult your physician immediately. Work within your rec-

ommended exercise level. DO NOT work to exhaustion. Before beginning any

exercise program, you should consult with your doctor. It is recommended that you

undergo a complete physical examination.

4

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Main frame 1 A7 Rear cover set plate 2

A2 Top support frame 1 A8 Front cover set plate 2

A3 Height adjusting tube 2 A9 Pulley 4

A4 Rear cover 1 A10 Pulley support plate 4

A5 Top rear cover 1 A11 Front cover 3

A6 Top front cover 1 A12

Left adjustment pulley

assembly

1

5

Components on the Product

No. Name Specication Notes

30

Hex head screw M10*P1.5*L35

Spring washer M10

Washer D19*d10.2*t3

31

Hex head screw M10*P1.5*L75

Spring washer M10

Washer D19*d10.2*t3

32

Set pin D20*d15*L48

Flat washer D26*d8.3*t3

Mushroom top inner hex screw M8*P1.25*L20

Components in the Hardware Kit

No. Name Qty. Specication Notes

12

Inner hex screw 6 M6*P1.0*L20

Washer 6 D18.6*d11*t1.7

Bushing 6 D19*7.8

13 Mushroom top Phillips screw 8 M5*L12

14 Screw socket 8

15 Floor xing bracket 2

Double open end wrench 2 13mm*17mm

L-shape hex wrench 1 M4

L-shape hex wrench 2 M5

L-shape hex wrench 1 M6

Screwdriver bit 1 Phillips and at

Screwdriver handle 1 Green

Assembly Parts

No. Name Qty. No. Name Qty.

A13

Right adjustment pulley

assembly

1 A19 Right rear support leg 1

A14 Left connector assembly 1 A20 Hook 8

A15 Right connector assembly 1 A21 Weight stack 36

A16 Front cover set bracket A 1 A22 Weight stack sticker 1

A17 Front cover set bracket B 1 A23 Hardware kit 1

A18 Left rear support leg 1

6

No. Name Specication Notes

33

Mushroom top inner hex screw M6*P1.0*L12

Spring washer M6

Flat washer D20*d6.3*t1.5

34

Inner hex screw M8*P1.25*L80

Flat washer D17*d8.3*t2

PU tube ØD12*d8*L61

Nyloc hex lock nut M8

35

Mushroom top inner hex screw M6*P1.0*L12

Flat washer D13*d6*t1.0

36

Mushroom top inner hex screw M6*P1.0*L15

Flat washer D13*d6*t1.0

37

Inner hex screw M6*P1.0*L30

Nyloc hex lock nut M6*P1.0*6

Rubber ball

Stopper terminal casing

Handle Ring

39 Mushroom top inner hex screw M6*P1.0*L15

40

Hex head screw M10*P1.5*L75

Spring washer M10

Washer D19*d10.2*t3

Cap nut M10*P1.25

7

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” is

used where screws, washers, and other hardware may be involved.

STEP 1 Install the Top Support Frame

Before beginning the assembly process, Please elevate the main frame with

packaging styrofoam to avoid any damages caused by pulleys colliding with

the ground. The machine front end should elevate about 8cm (3.14”) and the

middle end should elevate about 30cm (11.8”), so there is sufficient space to

assemble the rear foot support leg.

(a) Remove screws (30) from the main frame (A1).

(b) Attach the top support frame (A2) onto the main frame (A1), use screws

(30) to secure the assembly.

(b)

(a)

8

STEP 2 Install the Support Tube and the Connector

(a) Remove screws (31) (40) from the main frame (A1).

(b) Attach both connector assembly (A14) (A15) and the rear support legs

(A19) (A20) to the main frame (A1). Use screws (31) (40) to secure the

whole assembly.

(a)

(b)

9

STEP 3 Install the Adjustment Pulley and Adjustment Tube

(a) First, remove screws (32) from the adjustment tube (A3), and then slide

both adjustment pulley assembly (A12) (A13) onto each height adjustment

tube (A3).

(b) Attach each height adjustment tube (A3) onto the top support frame (A2)

and both connector assembly (A14) (A15) at the bottom. Use screws (32)

to secure the assembly, and make sure all the screws are fastened

before standing up the machine.

(a)

(b)

10

STEP 4 Install the Pulleys

(a) Remove screws (33) from the Main Frame (A1).

(b) Assemble the pulley assembly with pulley (A9) and pulley plate (A10).

Use screws (33) to secure the assembly to the main frame (A1).

(a)

(b)

11

STEP 5 Install the Weight Plates

12

STEP 5 Install the Weight Plates (Continued)

(Note: When one side of the weight plates is installed completely, follow the

same procedure to install the other side.)

(a) Hold the upper stack plate and then cut the zip tie. Gently lower the upper

stack plate into place.

(b) Remove screws (34) that secure the guide rods to the top of the weight

stack frame, and then set the guide rod downward into place.

(c) Tilt the guide rod backward and then lift the upper stack plate off the guide

rods as shown. (Note: Carefully set the upper stack plate aside.)

(a)

(b)

(c)

13

STEP 5 Install the Weight Plates (Continued)

(d) Insert weight plates (A21) into place on the guide rods one at a time.

Once complete, slide down the upper stack carriage on top of the weight

stack. (Note: The convex side faces up.)

(e) Tilt the guide rods back into place and then lift them up to their mounting

position. Use screws (34) to secure the assembly.

(d) (e)

14

STEP 6 Apply the Weight Stack Sticker

(a) Align and tape the cardboard to the upper left corner of the weight stack.

(b) Peel off the top half of the weight stack sticker (A22) backing.

(Note: Leave the clear outside margin in place on the sticker. Don’t peel

off the margin.)

(c) Align the weight stack sticker (A22) with the right side of the cardboard

and the top of the weight stack and then apply the sticker.

(d) When the stickers are in place, peel off the cardboard.

(Note: Press the sticker in place to ensure good contact on the weight

plate.)

(a)

(b)

(c)(d)

15

STEP 7 Install Front Cover Set Brackets

(a) Remove screws (35) from the main frame (A1).

(b) Align the holes, use screws (35) to secure the front cover set bracket A

(A16) and the front cover set bracket B (A17).

(Note: The front cover set brackets are side-specific. There’s a left (A16)

and a right (A17) front cover set bracket A/B. Make sure the front cover

set brackets are installed with the correct side face down and in proper

direction as below shown.)

(a)

(b)

16

STEP 7 Install Front Cover Set Brackets (Continued)

(c) Remove screws (35) from the bottom of the main frame (A1).

(d) Align the holes, use screws (35) to secure the front cover set bracket A

(A16) and the front cover set bracket B (A17).

(Note: The front cover set brackets are side-specific. There’s a right (A16)

and a left (A17) front cover set bracket A/B. Make sure the front cover

set brackets are installed with the correct side face up and in proper

direction as below shown.)

(c)

(d)

17

STEP 8 Install Front/Rear Cover Set Plate

(a) Remove screws (36) from the main frame (A1).

(b) Place the front cover set plate (A8) and rear cover set plate (A7) outside

of the side tabs. Align the holes, use screws (36) to secure the front cover

set plate (A8). And then use screws (36) to loosely secure the rear cover

set plate (A7). Do not tighten screws yet.

(Note: Secure the front cover set plate from inside to outside.)

(a)

(b)

18

STEP 9 Install the Cable

(a) Remove screws (37) from the rubber ball on the connector assembly

pulleys (A12) (A13) and then pull out the cable.

(b) Start from the bottom end of the connector assembly pulleys (A12) (A13)

follow the direction of the arrows to install the cable. (Note: Make sure the

cable goes through the pulleys).

(c) Once the cable went through all of the pulleys, use screws (37) to secure

the rubber ball on the connector assembly pulleys (A12) (A13). Use the

same procedure to install the other side.

(c)

(a)

(b)

19

STEP 10 Install the Rear/Front Cover

(a) Set the rear cover into the front cover set plate’s groove (A7), and then

align holes and fully tighten screws (36) of the rear cover set plate (A7).

(a)

La page est en cours de chargement...

SPORTS ART DS972 Le manuel du propriétaire

SPORTS ART DS972 Le manuel du propriétaire

dans d''autres langues

Autres documents