Levana Safe N' See LV-TW502 Manuel utilisateur

Marque: Levana

Modèle: Safe N' See LV-TW502

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

Ce manuel convient également à

LV-TW502

USeR MANUAL

www.myLevana.com

Model #:

Model #: LV-TW502

Safe N’ See™ Advanced

Digital Video Monitor

With Talk To Baby™ Intercom

Need

heLp?

DO NOT RETURN THIS

PRODUCT TO THE STORE

Please contact a Levana customer support representative regarding any additional information on product

features, specications or if you need any help with set-up, we are available 24/7!

Please contact us via one of the methods below:

Toll free telephone:

1.866.946.7828

For more product information visit www.mylevana.com

Email:

support@mylevana.com

Online live web chat:

Visit www.mylevana.com

Toll free fax:

1.888.771.1701

Note: This is manual version 1.0 for this product, you may nd updated versions by visiting our website

IMPORTANT! PLEASE READ

INTRODUCTION

NEED HELP? ................................................................................................................................................... 2

INTRODUCTION ............................................................................................................................................ 3

FEATURES ..................................................................................................................................................... 4

BUTTONS AND CONNECTIONS - MONITOR ..................................................................................................... 6

BUTTONS AND CONNECTIONS - CAMERA ....................................................................................................... 8

CAMERA SETUP AND MOUNTING GUIDE ....................................................................................................... 10

SETTING UP YOUR SYSTEM .......................................................................................................................... 11

BATTERY OPERATION ................................................................................................................. 11

ATTACHING POWER TO THE CAMERA ......................................................................................... 11

INSTALLING THE RECHARGEABLE BATTERY ................................................................................. 12

CHARGING THE MONITOR AND RECHARGEABLE BATTERY ........................................................... 12

CAMERA OPERATION .................................................................................................................................. 12

SWITCHING THE CAMERA ON/OFF ............................................................................................. 12

NIGHT VISION ............................................................................................................................ 13

MONITOR OPERATION ................................................................................................................................ 13

SWITCHING THE MONITOR ON/OFF ............................................................................................. 13

SETTING THE BRIGHTNESS ......................................................................................................... 14

ADJUSTING THE TEMPERATURE DISPLAY .................................................................................... 14

SWITCHING THE NIGHT LIGHT ON/OFF........................................................................................ 14

SELECTING A LULLABY ............................................................................................................... 14

ADJUSTING THE VOX SENSITIVITY .............................................................................................. 15

INTERCOM FEATURE ................................................................................................................... 15

RANGE ...................................................................................................................................... 15

ADJUSTING THE VOLUME............................................................................................................ 15

PAIRING ..................................................................................................................................................... 16

TROUBLESHOOTING .................................................................................................................................... 17

SPECIFICATIONS ......................................................................................................................................... 18

FCC STATEMENT ......................................................................................................................................... 19

SAFETY INSTRUCTIONS ............................................................................................................................... 20

PRODUCT WARRANTY INFORMATION .......................................................................................................... 21

TABLE OF CONTENTS

Congratulations on your purchase of the Levana TW502 Digital Video

Baby Monitor! This monitor uses advanced Clearvu® digital technology

that will deliver a crystal clear view of your baby’s room on the 3.5"

LCD screen, from anywhere in your home! Feel free to relax and take

comfort in knowing that your child is in good hands with Levana.

FEATURES

ClearVu® Digital Wireless Technology

ClearVu® technology ensures outstanding image and sound clarity so that you can

watch and listen to your child up to 500ft away

. Feel free to move around the house and no matter where you go, you

will always see your baby. With Levana, you’ll never miss a moment.

Large LCD for Superior Viewing Quality

Imagine what you will catch your baby doing on this bright and clear, large 3.5” LCD screen. With an LCD of this size

you will be able to set the monitor down and still see your baby clearly!

Temperature Monitoring to Ensure Safety

Studies indicate that your baby’s room should be between 61-68° F (16-20° C). This system is equipped with

temperature monitoring so you can monitor the temperature in your baby’s room and know they are always

comfortable.

Talk to Baby Intercom

Soothe your baby from a distance with the talk-to-baby intercom. With the simple press of a button you can let your

baby know you are on your way to their nursery or simply talk to them until they fall back to sleep without having to

go into his or her room.

Five Soothing Lullabies

Choose from ve dierent lullabies to soothe your baby to sleep. Turn lullabies on and o as well as change the song

being played all from the parent unit with the simple push of a button. Choose from Rock-a-Bye Baby, Hush Little

Baby, Itsy-Bitsy Spider, Sleep Baby Sleep and Twinkle Twinkle.

Night Vision

The built-in night vision allows you to see your child, even in complete darkness up to 10ft away. When the lights go

down the system automatically adjusts to the level of light. The camera can be placed anywhere in your child’s room

while still displaying a precise image of your baby

Relaxing Nightlight

The baby unit has a gentle nightlight that you are able to turn on and o from the parent unit. Turn the light on if your

baby is getting restless to calm them and turn it o when your baby is asleep, all without going into the baby’s room.

Voice Activated Control

Conserve battery power and sleep well at night with VOX activation. VOX allows you to turn o the monitor while your

child is safe and sound. It will only turn on when they make noise. You have the ability to adjust the level of sound

needed in order for your monitor to turn on.

Rechargeable Monitor

Enjoy up to four hours of continuous audio and video monitoring with a fully charged unit

LED Noise Level Indication Lights

The monitor has LED lights on it that light up to display up to ve dierent levels of sound.

This means you can turn the volume all the way down, relax and still know when and how much noise your baby is

making.

FEATURES

All-in-One Table Stand and Belt Clip

The table-stand also functions as a belt clip for ultra usability. Place the monitor upright with the table stand when

you are in the same room. You can also carry the monitor with you and still have both hands available by using the

belt clip.

Energy Ecient Power Adapter

The power adapters save you on power all while saving the environment. They are rated with a Level V eciency

standard which means they are 30% more energy ecient then other conventional power adapters.

Wall Mount on Baby Camera for the Best Viewing Angle

The camera can be wall mounted so you can easily view your baby in its crib as well as see all other parts of the

nursery.

Lifetime Live Customer Support

Our customer support team can be reached by phone, by email and live web chat. Our experts will be happy to assist

you in English, French and Spanish.

Disclaimers

1. Optimum range is 150ft when signal is passing through walls or oors. Microwave ovens (when in use) may cause signal disruption at close

range. Buildings with metal frames may also cause signal disruption. Maximum transmission range is 500ft.

2. Night vision range up to 10ft under ideal conditions. Objects at or beyond this range may be partially or completely obscured, depending on

the camera application.

3. Battery life of 4 hours based on full duration testing. Battery life may vary depending on usage.

4. Product may not be exactly as shown on the package. Some images are used for illustration purposes only.

Notes

• Levana does not endorse any of its products for illegal activities. Levana is not responsible or liable in any way for any damage, vandalism,

theft or any other action that may occur while a Levana product is in use by the purchaser.

• Forsafetyreasons,babymonitorswithpowercordsshouldneverbehungonornearthecrib.Powercordsshouldbekeptatleast3feetaway

from the crib and baby’s reach at all times.

OPTIONAL ACCESSORIES

Extra Camera: LV-TW501-C

This system supports up to 3

additional cameras!

BUTTONS AND CONNECTIONS - MONITOR

1. Antenna

Transmits and receives signals

2. Rechargeable Battery Compartment

Insert the rechargeable battery here

3. Belt Clip and Support Stand

Flip up to use as a belt clip, or down to use as a support stand

4. Speaker

5. ON/OFF Button

Turns the unit ON and OFF

6. Talk Button

Enables you to speak through the camera intercom

7. Menu Button

Brings up the menu options

8. Power LED

Indicates the amount of battery left, green means the battery is charged, red means the battery

power is low

9. VOX LED

Illuminates green when VOX is enabled

10. Volume Level LEDs

Indicates the amount of sound being heard by the camera

11. Microphone

Press the talk button and speak into the microphone to talk to your baby

12. Volume Buttons

Increases/decreases the volume through the speakers; adjust settings in the menu

13. Play/Pause

Plays or pauses the lullaby playing through the camera

14. Lullaby Selector

Selects the lullaby that the camera will play

15. LCD Screen

Displays video of your baby

BUTTONS AND CONNECTIONS - MONITOR

BUTTONS AND CONNECTIONS - CAMERA

1. Antenna

Transmits and receives signals

2. Night Vision IR LEDs

Allows you to see up to 10 feet in complete

darkness

3. Camera Lens

Point at what you would like to view on the

monitor

4. Microphone

Captures all sounds in the baby’s room

5. Night Light

Soothe baby to sleep with the built in night

light

6. CDS Light Sensor

Detects the absence of light

and turns on night vision

7. Power LED

Indicates that the camera is

powered on

8. Power Input

Plug the included adapter into

this jack

9. Temperature Sensor

Reads the temperature and displays it on the

monitor

10. Battery Compartment

Remove screw to install 4 AAA batteries (not

included) for a completely wireless system

BUTTONS AND CONNECTIONS - CAMERA

This is a safety notice that is aimed at educating parents and caregivers of the

potential safety hazards associated with power cords being placed too close to a crib, play

area, or other baby sleep environment. Power cords should NEVER be placed within 3 feet of a crib, or within

baby’s reach. Using Levana’s Camera Setup and Mounting Guide, you can monitor your baby while they sleep

safely in their crib.

To Mount on a Tabletop Safely (Figure A):

1. Place the camera on a tabletop at least 3 feet away from your baby’s crib.

2. Feed the power cord down the back of the table or use wall clips to secure the cord away so baby cannot

reach.

3. Plug in the power cord, check to ensure that you can see your child and there are no viewing obstructions.

To Mount on a Wall Safely (Figure B-C):

Before drilling a hole, it is important to check the reception and camera positioning in the place that you

intend on hanging it to the wall. Ensure you are hanging the camera at least 3 feet away from baby’s crib.

1. Pre-drill a hole in the wall using a 3/16", 4.8mm drill bit.

2. Insert a wall anchor into the wall and tap gently with a hammer until the anchor is ush with the wall.

3. Insert a screw into the wall anchor and tighten until the screw only sticks out about 1/2 inch.

4. Plug the power cord into the power jack of the camera.

5. Locate the wall mounting hole on the bottom of the camera.

6. Slide the hole over the screw sticking out of the wall (Figure C).

7. Check to see that the monitor is secure, if it is loose you may have to tighten the screw more.

8. Use wall clips to secure the power cord away from the crib or baby’s reach.

CAMERA SETUP AND MOUNTING GUIDE

For more information please visit our website:

www.mylevana.com/safety

SETTING UP YOUR SYSTEM

Battery Operation

The camera unit can be powered using 4 AAA batteries instead of the included AC adapter.

1. Remove the battery compartment cover on the bottom of the camera base, using a small phillips

(cross) head screwdriver.

2. Place 4 AAA batteries (not included) in the compartment, paying attention to the labelled polarity

markings.

3. Replace the battery compartment cover using the small screwdriver.

Note: The power LED will ash when the battery charge is low.

Attaching Power to the Camera

1. Connect the small end of the power adapter into the DC Jack on the back of the camera.

2. Connect the other end of the adapter into an available wall outlet.

Remove Screw Using Small

Philips Head Screwdriver

Note: When the battery in the monitor is low battery, the power LED will turn red, when the power

plug has been inserted the power LED will turn green to show it is charging.

SETTING UP YOUR SYSTEM

Installing the Rechargeable Battery

1. Turn the belt clip on the back of the monitor

unit upwards.

2. Remove the battery compartment cover

using a at edge screwdriver to twist the

battery compartment latch to the open

position.

3. Insert the included rechargeable battery,

ensuring that the copper connections on the

battery line up with the copper connections

on the inside of the battery compartment.

4. Replace the battery compartment cover and

use a at edge screwdriver to tighten the

latch to the locked position.

Charging the Monitor and Rechargeable Battery

1. To charge the battery in the monitor unit, plug the included power adapter into the

power input jack on the right side of the monitor.

2. The power LED will light up red to indicate that the battery is being charged.

3. For safety reasons, use ONLY the adapters included in the package.

Copper Connections

Switching the Camera ON/OFF

Position the camera to view the area you wish to monitor, angle the camera

lens for best view, by turning it up or down.

1. Slide the power switch

to the ON position.

2. The Power LED on the front of the camera will light up green. The

camera is now ready to operate.

3. To turn OFF the camera, ip the power switch

back to the OFF

position.

CAMERA OPERATION

Switching the Monitor ON/OFF

1. Press and hold the power button until

you hear two beeps.

2. The LEVANA logo will appear on the screen

for a moment followed by the picture being

transmitted.

3. To turn o the unit, press and hold the power

button again for 1 second.

Note: The power LED will turn red when the rechargeable battery is low power.

Note: If you are using batteries to power the camera unit, and it does not start up

when the power switch is in the ON position, you may need to replace the

batteries. The Power LED will ash slowly when the batteries are low power.

Night Vision

The camera is equipped with four IR (infrared) LEDs. These LEDs, located on the front of the camera, allow

you to see up to ten feet in complete darkness. Allowing you to check your baby at any time of night.The

night vision LEDs will activate automatically when the camera detects that the light levels are too low.

MONITOR OPERATION

Without Night Vision With Night Vision

MONITOR OPERATION

Setting the Brightness

1. Press the menu button once.

2. The brightness icon will display on the screen

along with the brightness gauge that will indicate

the current set level.

3. Use the up and down buttons to adjust the

brightness level up and down.

Adjusting the Temperature Display

The ideal temperature for a baby’s room is between 16° - 20° C or 61° - 68° F. Please set or adjust the room

temperature accordingly.

1. Press the menu button

twice.

2. The temperature icon will display on the screen along with the current status of the temperature

function, either Celcius, Fahrenheit, or OFF.

3. Use the up and down buttons to turn the temperature function ON, to switch between either

Celcius or Fahrenheit, or to turn the temperature function OFF.

Switching the Night Light ON/OFF

1. Press the menu button three times.

2. The night light icon

will display on the

screen along with the current status of the

function, either ON or OFF.

3. Use the up and down buttons to

turn the night light of the camera ON or OFF.

Selecting a Lullaby

1. Press the play/pause button on the

right hand side of the monitor once.

2. The lullaby icon

will appear on the

monitor screen, and the last played lullaby will

start to play.

3. Press the lullaby button on the right

side of the monitor to select one of ve

lullabies to play.

4. Press the up and down volume buttons

during playback to adjust the volume of the

music.

Adjusting the VOX* Sensitivity

VOX = Voice Operated Transmission = Sound Detection

The VOX function allows the camera to transmit video and audio immediately after a sound is heard. Once

transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a button on the

monitor will also turn the screen and transmission ON at any time.

Setting the sensitivity of the VOX function will aect how easily the video will be transmitted, one bar

will require much louder sounds being detected before transmission will begin, than the ve bar setting

requires.

1. Press the menu button

four times.

2. The VOX icon

will display on the screen along with the current status of the function, either

OFF or a gauge indicating the current sensitivity, 1-5.

3. Use the up and down buttons to turn the VOX function OFF or adjust the sensitivity up and

down. One bar being the lowest sensitivity and ve bars being the highest sensitivity.

Intercom Feature

This video baby monitor is equipped with a 2-way audio intercom to enable you to talk to and soothe your

baby back to sleep without going into the room.

1. Press and hold the intercom button

in the

middle of the front of the monitor.

2. The intercom icon will appear on the monitor screen,

and you will be able to speak and be heard through

the speaker in the camera.

3. To stop talking release the intercom button.

Range

• When the distance between the camera and monitor is too great, the screen will go black and the

range icon will appear

, if this happens you will have to move the units closer together.

Adjusting the volume

1. In normal monitor operation, you can press the

up and down

buttons on the monitor to

adjust the volume of the noises you are hearing

from baby’s room.

MONITOR OPERATION

PAIRING THE DEVICES

The camera and monitor come paired (connected) together. If you do receive this

package and the devices do not automatically connect and transmit, you may do so

manually.

1. Slide the power switch

on the right hand

side of the camera to the OFF position.

2. Cover the light sensor on the front of the camera

with your nger or a cloth.

3. Slide the power switch

on the camera to

the ON position.

4. With the monitor switched on, press and hold

the play/pause button

for two seconds.

5. The pair icon will appear on the screen

and the power LED on the camera will blink for

a few seconds.

6. Press the menu button on the monitor to

conrm the setting.

7. C1... OK! will appear when the camera and

monitor are paired successfully and then

the video and audio will be transmitted

automatically.

Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources of power

from the camera and monitor and start the pairing process over again.

Light Sensor

TROUBLESHOOTING

PROBLEM SOLUTION

Equipment does not function • Camera and/or monitor are not

switched on

• The battery is dead or defective

• The power adapters are not connected

No reception/Screen freezes or turns black • Camera and monitor are not paired

• Camera is too far away from monitor

• The VOX sensitivity is set too low

• No signal

Reception interference (static) • The camera and monitor are too far apart

• The battery power is too low

• Other electronic devices are interfering with the

signal

• The camera or monitor are placed near too many

metal objects

Feedback (screeching, static) • The camera and monitor are too close together

• The volume on the monitor is set too high

Noise • Battery power is too low

Picture works but there is no sound • Volume setting is too low

Picture is black and white • Night vision LEDs are ON

• Increase the amount of light in the room being

monitored

The rechargeable battery will not charge • The power adapters are not connected

• Battery pack is not plugged in inside the battery

compartment

Maintenance

• Clean the surfaces of the camera and monitor with a soft, u-free cloth

• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care to not allow water into

any openings

• Never use cleaning agents or solvents

SPECIFICATIONS

Camera Specications

Input Power.......................................................................................100 - 240 VAC, 50 - 60 Hz ~ 200mA

Output Power ....................................................................................6 VDC ~ 800mA

IR LEDs and Range .............................................................................4 LEDs, 10 foot range

Range.................................................................................................500 Feet Maximum

Frequency Range ...............................................................................2.4 GHz

Operable Temperature ....................................................................... 32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)

Transmission Power ...........................................................................15 ~17 dBm

Monitor Specications

Input Power .......................................................................................100 - 240 VAC, 50 - 60 Hz ~ 200 mA

Output Power ..................................................................................... 6 VDC ~ 800mA

Operable Temperature ....................................................................... 32 ˚ F to 104 ˚ F (0 ˚ C to 40 ˚ C)

Screen Size .........................................................................................3.5"

Initial Charging Time ..........................................................................3 Hours

Battery Power Time ............................................................................ 4 Hours

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Any changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator and

your body. This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

This device and its antenna must not be co-located or operating in conjunction with any other antenna or

transmitter. This device and its antenna must not be co-located or operated in conjunction with any other

antenna or transmitter.

IC STATEMENT:

Operation of this device is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation

of the device.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to

this equipment. Such modications could void the user’s authority to operate the equipment.

SAFETY INSTRUCTIONS

Read and Keep Instructions: All the safety and operating instructions should be

read before the video baby monitor is operated.

Water and Moisture: This product is designed for indoor use only. The unit should not be exposed to

rain, moisture, dripping or splashing. No objects lled with liquid should be placed on top of, or beside the

product, such as a glass or vase. This item should not be used near water.

Non-Use Periods: Always unplug the AC adapters from the wall outlets during long periods of non-use.

Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the

ventilation openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air

ow.

Keep Away from Sources of Heat: This unit should not be exposed to direct heat sources such as a candle,

replace, radiator, heat register, stove or other appliance that emits heat. The unit should not be left in direct

sunlight.

Power Source: This unit should only be used with the AC power adapters included in this package (rated

6V 800mA)

Damage Requiring Service: This unit should be serviced by qualied personnel only when:

a. Objects have fallen or liquid has been spilled into the product

b. The units have been exposed to rain

c. The units do not appear to operate normally or exhibits a distinct change in performance

d. The units have been dropped or the enclosure damaged

Caution: This product cannot replace responsible adult supervision of a child. You should personally check

your child’s activity at regular intervals.

STATEMENT ON REGULATION

These units are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Operation with non-approved equipment or unshielded cables is likely to result in interference to radio or

TV reception. The user is cautioned that changes and modications made to the equipment without the

approval of manufacturer could void the user’s authority to operate this equipment.

La page charge ...

Levana Safe N' See LV-TW502 Manuel utilisateur

Marque: Levana

Modèle: Safe N' See LV-TW502

Catégorie: Moniteurs vidéo bébé

Taper: Manuel utilisateur

Ce manuel convient également à

LV-TW502

Télécharger le PDF

rapport

dans d''autres langues

English: Levana Safe N' See LV-TW502 User manual

Levana Safe N' See LV-TW502 Manuel utilisateur

Ce manuel convient également à

Levana Safe N' See LV-TW502 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents