brondell FreshSpa Thinline Le manuel du propriétaire

Owner's Manual

FreshSpa

Thinline Precision Essential Bidet Attachment

with Single Nozzle FSP150

Attach proof of purchase to this page.

Adjunte prueba de compra a esta página

Joindre une preuve d’achat à cette page

1

FRESHSPA FSP150 OWNER’S MANUAL

Contents

Product information

2 Product features

3 Product components

4 Product dimensions

Product installation

5 Before installation

5 Installing the bidet attachment

Product information

9 Using The FreshSpa

Maintenance

9 Cleaning the FreshSpa

9 Short term non-use

Technical information

10 Product speciﬁcations

11 Warranty

12 Contact

Translations

13 Spanish

25 French

Read this Owner’s Manual for correct

installation, use and maintenance of this

product. After reading and completing

installation, keep this manual in a place

that is easily accessible.

2

• high-quality ABS material with full body panel

• hygienic retractable nozzle

• self-cleaning nozzle feature

• ambient temperature bidet wash

• precision adjustable water pressure

• ceramic-core internal valve

• high-quality metal ⅞” T-valve

• durable braided metal cold water hose

• no electricity or batteries required

• easy installation and adjustable toilet ﬁt

• all accessories included for standard installation

• one-year warranty

PRODUCT INFORMATION

Product features

3

Single nozzle bidet attachment

T-valve connector with

included rubber cone

washer

(⅞" x ⅞" x ⅜")

Teﬂon tape

Adjustable

mounting brackets (2)

29” braided metal

bidet hose

PRODUCT INFORMATION

Product components

4

PRODUCT INFORMATION

Product dimensions

9.2"

2.04" at deepest point

on control

15.16"

10"

6"

0.76"

2.98"

0.23" thick

2.54"

5

PRODUCT INSTALLATION

Before installation

Important

Please be advised that the provided T-valve

should be installed at the ﬁll valve under the

toilet tank, and NOT at the cold water supply

coming from the wall.

If you do not have access to the ﬁll valve under

the toilet tank, contact Brondell Customer

Service at 888.542.3355. We may be able to

provide alternative options.

Check water supply line

Check the water supply line that connects the

toilet tank ﬁll valve to the water shut-o valve at

the wall. If it is a rigid pipe, you will need to

purchase a ﬂexible water supply hose to replace

it before installing the FreshSpa. The length

of the hose you purchase may vary, but the top

connection size should be ⅞” ballcock (to

connect to the T-valve that you will install under

the toilet tank), and the bottom connection will

be 3/8” or ½” female compression (to connect at

the shut-o valve at the wall).

INCORRECT

Cold Water Supply

Fill Valve

CORRECT

6

Step 2c

Step 3a

Step 3b

PRODUCT INSTALLATION

Installing the bidet attachment

1. Remove the existing toilet seat.

a. Lift hinge covers and use ﬂathead or Phillips

head screwdriver to remove the mounting

bolts. Alternatively, you may need to loosen

mounting bolts underneath the seat.

b. Remove the toilet seat and set the seat,

mounting bolts, and hardware aside.

2. Turn o water supply valve and ﬂush toilet.

a. Turn o water supply at the wall to stop ﬂow

of water.

b. Flush toilet and hold down handle to

completely empty toilet tank.

c. Disconnect water supply hose from the ﬁll

valve under the toilet tank.

3. Connect ⅞” T-valve to water supply line and

ﬁll valve under toilet tank.

a. Install the ⅞” T-valve with included rubber

washer to the incoming water connection

on the bottom of your toilet tank. Ensure the

rubber washer is properly seated, tapered

side up.

b. Connect the cold water supply line coming

from the wall to the bottom of the T-valve.

Step 1b

7

4. Connect the bidet hose to the T-valve.

a. The ends of the bidet hose are two dierent

sizes. Determine which is the smaller of the

two ends.

b. Connect the smaller end of the braided metal

bidet hose to the remaining open side of the

installed T-valve.

5. Install adjustable mounting brackets into the

bidet attachment.

a. Line up the dots of one of the adjustable

mounting brackets with the dots around one

of the open mounting bracket holders.

b. Push the bracket into the bracket holder until

it snaps into place.

c. Repeat steps 1 and 2 to install the other

adjustable mounting bracket.

6. Install bidet attachment on toilet.

a. Place bidet attachment on the toilet with

the nozzle(s) close to the back of the toilet,

leaving a slight gap between the toilet and

the nozzles. This will vary by toilet.

b. Make sure the adjustable brackets line

up with the holes in the toilet ﬁxture. You

may need to rotate the adjustable brackets

accordingly to line up properly.

c. Replace the toilet seat on top of bidet

attachment and secure using original toilet

seat hardware. Make sure to tighten so that

the bidet attachment and seat do not move.

d. Ensure that no buttons on the control

panel are depressed to prevent water from

accidentally spraying out of the toilet bowl.

Step 4b

Step 6a

Step 6c

Step 6b

PRODUCT INSTALLATION

Installing the bidet attachment

8

7. Connect the bidet hose to the bidet attachment.

Connect open end of bidet hose to the connection

underneath the bidet attachment.

8. Turn on the water supply and check for leaks.

a. Open the main water supply valve slowly and

check for leaks.

b. Wait 5-10 minutes, check again and if there are

no leaks, continue.

Step 7

PRODUCT INSTALLATION

Installing the bidet attachment

Note: If there is any leaking, check all rubber washers and make sure all water

connections are tight and secure. If necessary, you can use the provided Teﬂon

tape (plumber’s tape) for any leaking connections.

9

PRODUCT OPERATION

Use and maintenance

Caution: To avoid discomfort or injury, scroll

precision roller wheel to lowest pressure before

initiating a wash.

Using the FreshSpa:

To clean the bidet nozzle, push the “Nozzle

Cleaning” button and water will wash over the

nozzle. Push the “O” button to turn o nozzle

cleaning.

For the general bidet wash function, push the

“Wash” button

• to increase the water pressure, scroll the precision

wheel back towards the (+) icon

• to decrease the water pressure, scroll the

precision wheel forward towards the (-) icon

• to stop the ﬂow of water, push the “O” button

Cleaning the FreshSpa:

To clean the nozzle, pull down on the nozzle cap and

clean the nozzle spray holes using a toothbrush or

soft cloth and mild detergent (such as dish soap).

When cleaning, be careful not to drop or ﬂush the

nozzle cap. Periodically tighten the nozzle cap so it

doesn’t become loose with use and cleaning.

To clean the FreshSpa, use a mild cleaner such as

Simple Green or Windex spray. Do not scrub or use

harsh, abrasive products to clean the FreshSpa, as

they may scratch the product.

Short term non-use:

If the product will not be used for more than a few

weeks, you may consider shutting the water supply

o at the wall for extra precaution.

Wash

Precision wheel

Nozzle cleaning

O

10

Note: The speciﬁcations listed above are subject to change without prior notice for reasons of improving

the product performance.

FreshSpa Thinline Precision Essential Bidet Attachment with Single Nozzle

Model FSP150, single nozzle, ambient temperature

Incoming water pressure range 11.60 psi–116.03 psi / 0.08 MPa–0.8 MPa

Incoming water temperature range 32 °F–158 °F / 0 °C–70 °C

Flow rate 0.66 gal/min / 2.5 L/min

Product dimension 15.16in x 10.0in x 3.35in / 38.5cm x 25.4cm x 8.5cm

Product thickness 0.23in / 0.6cm

Product weight 1.1lbs / 0.5kg

TECHNICAL INFORMATION

Product speciﬁcations

11

Brondell products are backed by some of the most comprehensive warranties in the industry. Brondell

warrants that all products (excluding consumable items) shall be free from defects in material and

workmanship under normal use and service.

FreshSpa FSP150 Residential 1-year limited warranty

100% Coverage of all parts and labor for the entire product for the ﬁrst year from original date of

purchase.

FreshSpa FSP150 Commercial warranty

Warranty period 1 year from original purchase date for all Brondell products. Warranties may not apply

to products that are used for heavy commercial, hospital, or other high use non-residential applications.

Exclusions and limitations

1. BRONDELL warrants its products to be free from manufacturing defects under normal use and

service. This warranty is extended only to the ORIGINAL PURCHASER.

2. BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s

option, of products or parts found to be defective, provided that such products were properly installed

and used in accordance with instructions. BRONDELL reserves the right to make such inspections as

may be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor

or parts in connection with warranty repairs for the ﬁrst full year from date of purchase on all products

except those that may be subject to commercial use limitations.

3. BRONDELL is not responsible for the cost of removal, return (shipping) and/or re-installation of

products. This warranty does NOT apply to:

• Damage or loss which occurs during shipment.

• Damage or loss sustained through any natural or man-made causes beyond the control of

BRONDELL, including but not limited to ﬁre, earthquake, ﬂoods, etc.

• Damage or loss resulting from sediments or foreign matter contained in a water system.

• Damage or loss resulting from negligent or improper installation including installation of a unit in

a harsh or hazardous environment.

• Damage or loss resulting from removal, improper repair, modiﬁcation of the product, or improper

maintenance including damage caused by chlorine or chlorine related products

4. This warranty gives you speciﬁc legal rights. You may have other rights which vary from state to state.

THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR

REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY

AVAILABLE TO THE PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE

OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES

OR EXPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO

INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE

NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,

ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO

THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE

LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.

How to obtain service

To obtain repair service under this warranty, you must contact an authorized BRONDELL Service Center

to obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy

of the original receipt must accompany the returned unit for the warranty to be valid. Take or ship the

unit pre-paid to the closest Brondell authorized service center along with the RMA number and proof of

purchase.

To obtain the RMA number and locate the BRONDELL Service Center location nearest you, please call

1-888-542-3355.

TECHNICAL INFORMATION

Warranty

Contact:

Brondell, Inc.

PO Box 470085

San Francisco, CA 94147-0085

1-888-542-3355

suppor[email protected]om

www.brondell.com

For questions, contact Brondell

Customer Service: 1-888-542-3355

Manufactured by:

Brondell, Inc.

PO Box 470085

San Francisco, CA 94147-0085

Please retain receipt records

for any warranty claims.

13

MANUAL DEL PROPIETARIO DE FRESHSPA FSP150

Contenido

Información del producto

13 Características del producto

14 Componentes del producto

15 Dimensiones del producto

Instalación del producto

16 Antes de la instalación

17 Instalación del accesorio de bidé

Funcionamiento del producto

20 Uso del FreshSpa

Mantenimiento

20 Limpieza del FreshSpa

20 Ausencia de uso de corto plazo

Información técnica

21 Garantía

22 Contacto

Traducciones

1 Inglés

25 Francés

Lea este Manual del Propietario

para instalar, utilizar y mantener este

producto correctamente. Después de

leer y completar la instalación, guarde

este manual en un lugar a mano.

14

• material ABS de alta calidad con panel de

cuerpo entero

• boquilla higiénica retráctil

• característica de la boquilla de autolimpieza

• lavado de bidé a temperatura ambiente

• presión de agua ajustable con precisión

• válvula interna con núcleo de cerámica

• válvula T de metal de ⅞” (2.2cm ) de alta calidad

• manguera de metal trenzado duradera para

agua fría

• no requiere electricidad ni baterías

• fácil instalación y calce ajustable al inodoro

• todos los accesorios incluidos para la instalación

estándar

• un año de garantía

INFORMACIÓN DEL PRODUCTO

Características del producto

15

Accesorio de bidé de boquilla única

Conector de válvula T con

arandela cónica de goma

(2.2 cm x 2.2 cm x 1 cm)

Cinta de Teﬂón

Ajustable soportes de

montaje ajustables (2)

Manguera para bidé

de metal trenzado

73.7 cm

INFORMACIÓN DEL PRODUCTO

Componentes del producto

16

INFORMACIÓN DEL PRODUCTO

Dimensiones del producto

23.37 cm

5.18 cm en el punto más

profundo del control

38.51 cm

25.4 cm

15.24 cm

1.93 cm

7.57 cm

0.58 cm de espesor

6.45 cm

17

INSTALACIÓN DEL PRODUCTO

Antes de la instalación

Importante:

Tenga en cuenta que la válvula T suministrada

debe instalarse en la válvula de llenado debajo

del tanque del inodoro, y NO en el suministro de

agua fría que viene de la pared.

Si no tiene acceso a la válvula de llenado debajo

del tanque del inodoro, comuníquese con el

Servicio de Atención al Cliente de Brondell al

888.542.3355. Podríamos ofrecerle opciones

alternativas.

Revisar la línea de suministro de agua

Revise la línea de suministro de agua que

conecta la válvula de llenado del tanque del

inodoro a la válvula de cierre de agua en la

pared. Si es una tubería rígida, necesitará

comprar una manguera ﬂexible de suministro

de agua para reemplazarla antes de instalar

el FreshSpa. La longitud de la manguera que

compre puede variar, pero el tamaño de la

conexión superior debe ser ⅞” (2.2 cm) ballcock

(para conectar a la válvula T que instalará debajo

del tanque del inodoro), y la conexión inferior

será una válvula de compresión hembra de ⅜” (1

cm) o ½” (1.3 cm) (para conectar en la válvula de

cierre en la pared).

INCORRECTO

Suministro de agua fría

Llenar la

válvula

CORRECTO

18

Paso 2c

Paso 3a

Paso 3b

INSTALACIÓN DEL PRODUCTO

Instalación del accesorio de bidé

1. Retire el asiento del inodoro existente.

a. Levante las tapas de las bisagras y utilice

un destornillador de cabeza plana o Phillips

para quitar los pernos de montaje. También

puede ser necesario aﬂojar los pernos de

montaje que están debajo del asiento.

b. Retire el asiento del inodoro y apártelo

junto con los pernos de montaje y los

herrajes.

2. Cierre la válvula de suministro de agua y

vacíe el tanque del inodoro.

a. Corte el suministro de agua en la pared

para detener el ﬂujo de agua.

b. Descargue el inodoro y sujete la manija

para vaciar completamente el tanque del

inodoro.

c. Desconecte la manguera de suministro de

agua de la válvula de llenado debajo del

tanque del inodoro.

3. Conecte la válvula T de ⅞” (2.2 cm) a la

línea de suministro de agua y llene la válvula

debajo del tanque del inodoro.

a. Instale la válvula T de ⅞” (2.2 cm) con

arandela de goma incluida en la conexión

de agua entrante en el fondo del tanque

del inodoro. Asegúrese que la arrandela la

arandela de goma esté bien asentada, con

el lado cónico hacia arriba.

b. Conecte la línea de suministro de agua fría

que viene de la pared a la parte inferior de

la válvula T.

Paso 1b

La page charge ...

brondell FreshSpa Thinline Le manuel du propriétaire

brondell FreshSpa Thinline Le manuel du propriétaire

dans d''autres langues

Documents connexes