KALORIK RVC 47730 BK Manuel utilisateur

Catégorie
Aspirateurs robotiques
Taper
Manuel utilisateur

Ce manuel convient également à

1
www.KALORIK.com
RVC 47730 BK - 200605
IONIC PURE AIR SMART ROBOT VACUUM PRO
ASPIRATEUR ROBOT IONIQUE AIR PUR PRO
RVC 47730 BK
EN……....2
FR….......18
11.1V Li-ion, 1500mAh
2
www.KALORIK.com
RVC 47730 BK - 200605
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before use.
2. This device can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of this device in a safe way and understand
the hazards involved.
3. Children should be supervised to ensure they do not play with this
device.
4. Cleaning and maintenance shall not be performed by children without
adult supervision.
5. This device is only to be used with the charging base and adaptor
provided.
6. The battery must be removed from this device before this device is
disposed of. Do not attempt to disassemble or replace the battery
yourself as incorrect operation might cause overheating, fire or injury.
7. The Li-ion battery should be serviced or recycled by an authorized
service provider, and must be recycled or disposed of separately from
household waste. Dispose of the battery according to your local
environmental laws and regulations.
8. The external cord of the charging base unit cannot be replaced; if the
cord is damaged, the charging base shall be disposed of.
9. This device is for indoor use only.
10. This device is not a toy. Do not sit or stand on this device. Small children
and pets should be supervised when this device is operating.
11. Store and operate this device in room temperature environments only.
12. Clean with a cloth dampened with water only.
13. Do not use this device to pick up anything that is burning or smoking.
14. Do not use this device to pick up spills of bleach, paint, chemicals, or
anything wet.
15. Before using this device, pick up objects like clothing and loose paper.
Lift up cords for blinds or curtains, and move power cords and fragile
objects out of the way. If this device passes over a power cord and
drags it, an object could be pulled off a table or shelf.
16. If the room to be cleaned has a balcony, a physical barrier should be
used to prevent access to the balcony and to ensure safe operation.
3
www.KALORIK.com
RVC 47730 BK - 200605
17. Do not place anything on top of this device.
18. Be aware that this device moves around on its own. Take care when
walking in the area where this device is operating to avoid stepping on
it.
19. Do not operate this device in areas with exposed electrical outlets on
the floor.
20. Do not expose the electronics of this device, its battery, or the charging
base. There are no user-serviceable parts inside.
21. Do not use this device on an unfinished, unsealed, waxed or rough
floor. It may result in damage to the floor and this device. Use only on
hard floor surfaces or low-pile carpet.
22. This device has been designed to be used on floors without scratching
them. We still recommend that you test this device on a small area of
the room to be cleaned to ensure no scratches are made before
cleaning the whole room.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
KNOW YOUR IONIC PURE AIR SMART ROBOT
VACUUM PRO
Tackle life’s everyday messes without ever lifting a finger! This helpful little
robot and tidiest new member of your household makes messes
disappear before you even know they’re there. The Kalorik Home Smart
Robot Vacuum Pro cleans your house from the ground up, leaving not only
your floors spotless, but the air in your home too! Ionic Pure Air technology
harnesses the power of negative ions which magnetically attract airborne
pollutants to remove them from the air you breathe. Advanced HEPA
filtration provides added support for capturing dust and allergens. High-
velocity suction and dual multi-surface rotation brushes loosen and lift dust,
dirt, hair, and debris for pristine floors and carpets. Endurance cleaning with
auto-return vacuums up to 90 minutes before automatically returning to
the base to dock and recharge. The Kalorik Home Smart Robot Vacuum
Pro keeps a low profile, both in its slim design and reduced noise emission. It
swiftly cleans under low-hanging furniture, beds, sofas, and other hard-to-
reach areas where dust hides. WiFi connectivity lets you easily start your
4
www.KALORIK.com
RVC 47730 BK - 200605
cleanings from your phone, or with voice control via Amazon Alexa or
Google Assistant. Anti-collision sensors and gyroscopic mapping
intelligently navigate your home, avoiding stairs, ledges and obstacles for a
thorough, accurate clean. Cleaning modes include: Smart, Spiral, Wall
Follow, Manual, and Return to Charging Base.
MAIN UNIT COMPONENTS
NOTE: The AUTO button is used to pause/restart the vacuuming process.
It is also used to connect the robot vacuum to the KALORIK Home app.
Bumper
AUTO button
Charging sensor
Front wheel
Side brush
Side brush
Side wheel
Side wheel
Air suction
Bottom cover
Battery cover
5
www.KALORIK.com
RVC 47730 BK - 200605
BEFORE THE FIRST USE
Remove any power cords and small objects from the floor that may
obstruct the vacuum. Fold any tasseled edges of area rugs underneath
to prevent tangling when vacuuming.
Avoid cleaning very dark-colored, high-pile rugs or rugs thicker than 1
in. / 26 mm, as they may cause the appliance to malfunction.
Keep the vacuum away from spaces lower than 3 in. / 73 mm to
prevent it from getting stuck. If necessary, place a physical barrier to
block off the problem areas.
Keep the vacuum away from wet areas.
The vacuum may climb on top of objects less than 1 in. / 16 mm tall.
Remove these objects if possible.
Anti-drop sensors prevent the vacuum from tumbling down stairs and
steep drops. They may work less effectively if dirty or used on
reflective/very dark-colored floors. It is recommended to place physical
barriers to block off areas where the vacuum may fall.
Remove the foam blocks beside the bumper before use.
Note: Place physical barriers in front of fireplaces and areas that could
damage the vacuum.
Dust container
Preliminary
filter
HEPA filter
Filter
support
Dust container
cover
Dust
container
Power adaptor
socket
Adaptor
Charging base
6
www.KALORIK.com
RVC 47730 BK - 200605
ASSEMBLY
Insert the side brushes into the vacuum. Please make sure the “L” and
“R” signs on the side brushes correspond to the position “L” and “R” at
the bottom of the machine respectively.
Place the charging base on a hard, level surface and against a wall.
Remove objects within 3 ft. / 1 m of the left and right side and within 6
ft. / 2 m of the front of the charging base.
Connect the round connector of the adapter into the power socket on
the charging base and the other end into a wall outlet.
Press the AUTO button on top of the vacuum to turn the unit on.
Alternatively, you can use the KALORIK Home app, Alexa or Google
Home to turn on the vacuum.
NOTE:
Install the charging base in a location that the vacuum can easily
access. It is recommended to place the charging base against a
wall, and on a hard-level surface rather than on rugs or carpets.
Always keep the charging base plugged in, otherwise the vacuum
will not automatically return to it.
Charging the Vacuum
The vacuum has a pre-installed rechargeable battery that must be fully
charged (approximately 4-6 hours) before use. The vacuum returns to the
charging base at the end of a cleaning cycle or when its battery is running
low.
7
www.KALORIK.com
RVC 47730 BK - 200605
There are two ways to initially charge the vacuum when it has no power:
Option 1: Attach the vacuum to the charging base by aligning its
charging pins with the charging pins on the base.
Option 2: Directly connect the power adaptor to the jack on the
side of the vacuum.
If the vacuum has sufficient power, it can also be directed to the charging
base by using the KALORIK Home app. Otherwise, the unit will return to the
charging base when low on power.
USING WITH WIFI
KALORIK Home App
The vacuum is WiFi compatible through the KALORIK Home app. The WiFi
functionality allows you to control the vacuum through your smartphone
while also mapping the areas the vacuum has cleaned. It can be
downloaded by searching for the app on your smartphone or using the QR
Codes below.
Once the download is complete, follow the onscreen instructions to
create your account.
Restart the vacuum. Press and hold the AUTO button on top of the
robot vacuum. The indicator light will flash blue for 10 seconds,
indicating the robot vacuum is in WiFi mode.
8
www.KALORIK.com
RVC 47730 BK - 200605
In the KALORIK Home app, press the “+” symbol in the top right corner
or “Add Device” in the center.
Select “Small Home Appliances”, then choose the “Robot Vacuum”
category. Follow the instructions to input your WiFi information and
connect the app to your WiFi network.
There are 2 ways to connect your robot vacuum to the KALORIK Home
app:
EZ Mode (recommended): Uses your home WiFi network to
communicate between your phone and the robot vacuum
AP Mode: Uses the robot vacuum’s built in WiFi to
communicate between your phone and the robot vacuum.
Once the KALORIK Home app is connected to your WiFi, click on the
upper right corner to select between "EZ Mode" or "AP Mode". Click the
small circle in front of "Confirm indicator rapidly blinking", then click
"Next" to proceed to the next step.
To connect in EZ Mode:
After selecting “EZ Mode” in the KALORIK Home APP, press and hold the
AUTO button on top of the robot vacuum. The indicator light will rapidly
flash purple, indicating the robot vacuum is in EZ Mode.
Once the indicator light begins to flash, press the “Next” button. The
app interface will display "Adding device..." as the device connects.
Once successful, the indicator light on the robot vacuum will be steady
blue light and the app will read “Added successfully”.
To connect in AP Mode:
After selecting “AP Mode” in the KALORIK Home APP, press and hold
the AUTO button on top of the robot vacuum. The indicator light will
rapidly flash purple. Release the AUTO button and press again. The
indicator light will flash slowly, indicating the robot vacuum is in AP
Mode.
Once the indicator light begins to flash, press the “Next” button.
9
www.KALORIK.com
RVC 47730 BK - 200605
Select "Go to Connect" on the app interface and connect your phone
to the robot vacuum’s WiFi hotspot. The app interface will display
"Adding device..." as the device connects.
Once successful, the indicator light on the robot vacuum will be steady
blue light and the app will read “Added successfully”.
For more information and instructions on how to connect your robot
vacuum, please visit http://www.kalorik.com/robotvacuumguide
Using with Amazon Echo and Amazon Alexa
The robot vacuum is compatible with Amazon Echo’s Alexa. Follow the
steps below to connect:
1. Make sure your Amazon Echo is set up and that the Amazon Alexa app
is downloaded and connected to your Amazon Echo.
2. Make sure you have downloaded the KALORIK Home app and
successfully connected the robot vacuum as outlined in the “KALORIK
Home App” section. Make sure it is connected to the same WiFi as the
Alexa app.
3. In the Amazon Alexa app. Tap the “More” menu towards the bottom
right of the Alexa app.
4. Tap the “Skills & Games” category and search for “KALORIK Home”.
5. Tap “ENABLE” to enable the KALORIK Home app.
6. You will be redirected to a page to link the account. Type in your
KALORIK Home login information and select the corresponding
country/region.
7. Tap "Link Now" to link your KALORIK Home account. Note: all the
account information must match your KALORIK Home account
information to successfully link.
8. Say out loud “Alexa, discover devices” towards the Amazon Echo. This
will cause your Amazon Echo to connect to any devices linked to the
KALORIK Home app.
After completing the steps above, you will be able to control your robot
vacuum through Amazon Echo. The name of your robot vacuum will be
the same as the name set in the KALORIK Home app.
Note: whenever you change the device's name on the KALORIK Home
app, your Echo must re-discover the robot vacuum.
10
www.KALORIK.com
RVC 47730 BK - 200605
Using with Google Home and Google Assistant
The robot vacuum is compatible with Google Home. Follow the steps
below to connect:
1. Make sure your Google Home is set up and that the Google Home app
is downloaded and connected to your Google Home.
2. Make sure you have downloaded the KALORIK Home app and
successfully connected the robot vacuum as outlined in the “KALORIK
Home app” section. Make sure it is connected to the same WiFi as the
Google Home app.
3. In the Google Home app, tap the menu icon in the upper left corner.
4. Select “Home control”.
5. Tap the “+” button in the lower right corner and search for “KALORIK
Home
6. Select you KALORIK Home’s account region and input your KALORIK
Home account and password.
7. Tap “Link Now”, then “Authorize”. After you assign rooms for devices,
your devices will be listed in the Home Control page. Note: all the
account information must match your KALORIK Home account
information to successfully link.
8. The robot vacuum should appear under devices. If you wish to set a
nickname using Google Home, select the robot vacuum and tap “Set
a nickname” to enter the desired name.
After completing the steps above, you will be able to control your robot
vacuum through Google Home.
Note: if you change the device's name on the KALORIK Home app, your
Google Home must re-discover the robot vacuum.
USING THE APPLIANCE
The Kalorik Home Ionic Pure Air Smart Robot Vacuum Pro has several
cleaning functions outlined in this section.
11
www.KALORIK.com
RVC 47730 BK - 200605
Smart Cleaning
Pressing the AUTO button on the vacuum or the “A” icon labeled “Smart” in
the KALORIK Home App causes the robot vacuum to start automatically
cleaning.
Manual Control
Press the “Manual” icon in the KALORIK Home app to control the robot
vacuum using directional buttons.
Spiral Mode
The vacuum moves in an outward spiral, cleaning the floor in expanding
circles. Place the unit by the area you wish to power clean and use the
KALORIK Home app to activate. When complete, the machine will return to
the auto sweeping mode.
Wall Follow Mode
In Wall Follow mode, the vacuum follows the wall while avoiding obstacles
to ensure the edge is cleaned thoroughly. Use the KALORIK Home app to
activate. The mode remains on until the user changes to another mode.
NOTE: Pressing the “Switch” button in the KALORIK Home app will turn the
robot vacuum off and on in any of the modes.
Adhesion settings
Toggling the adhesion settings changes between the two speed settings:
“Strong” and “Normal” modes. The Strong mode operates at a higher
speed setting with stronger suction power while the Normal mode operates
at a lower speed, using less energy. The adhesion setting can be changed
during any of the other operating functions using the settings in the
KALORIK Home app.
Using the Ion Function
The vacuum comes with an Ionic Air Purifier function that generates
negative ions which magnetically attract pollutants to remove them from
the air you breath. This function can be turned on or off through the settings
in the KALORIK Home app and be used simultaneously with any other
mode. The indicator light on the robot vacuum will turn purple when this
function is activated.
12
www.KALORIK.com
RVC 47730 BK - 200605
Directing to the Charging Base
If the vacuum has sufficient power, it can be directed to the charging base
by using the KALORIK Home app. Otherwise, the unit will return to the
charging base when low on power. Battery level is indicated by
percentage on the main screen, labeled “Residual Electricity”.
CLEANING AND MAINTENANCE
Follow the instructions below regularly to clean and maintain the vacuum.
NOTE:
Before cleaning, always switch the vacuum off and disconnect the
charging base.
Never immerse any electrical part of the product in water or other
liquids. Never place under running water.
Never use solvents or abrasive materials. Never use metallic or
sharp cleaning tools.
Cleaning the Filters
For optimal performance, cleaning the filters is recommended
approximately after a week of regular use.
Follow the instructions below along with the corresponding images.
A. Press down towards the end of the cover as indicated. The cover will
open automatically.
B. After removing the dust container, please make sure to check if the
suction channel of the appliance is not obstructed in any way.
C. Remove the HEPA filter.
D. Remove the preliminary filter.
E. Pour all the dust out of the dust container onto a trashcan.
F. Proceed to clean the dust container, preliminary filter, and HEPA filter
fully. Our suggestion is to clean the HEPA filter every 15-30 days of use.
The maximum service life of the HEPA filter is 24 months. The HEPA filter is
not to be cleaned using a brush, but instead it should be blown using a
dryer, or slightly knocked to remove all the dust. NOTE: Please do not
wash it with water.
G. Assemble all parts again carefully. Please make sure both filters are
assembled properly to prevent any damage to the appliance.
13
www.KALORIK.com
RVC 47730 BK - 200605
NOTE:
Please clean the dust container and suction channel every time
after sweeping.
When cleaning the dust container with water, make sure to let it dry
naturally, but not under the sun. As soon as it is thoroughly dried, it
should be put back into the robot vacuum to prevent affecting the
functions and life of the appliance.
If any of the filters are damaged, they need to be replaced as soon
as possible to prevent affecting the effectiveness of dust removal.
Cleaning the Sensors
Use a soft damp cloth to wipe the sensors gently on both the unit and the
charging base. See the following image for reference on where the sensors
are located.
Electrode
Sensor
Sensor
Charging
connectors
14
www.KALORIK.com
RVC 47730 BK - 200605
Cleaning the Side Brushes
For optimal performance, cleaning the side brushes is recommended
approximately after a month of regular use. Follow the instructions below to
clean the side brushes.
Remove the side brushes from the vacuum.
Carefully remove any debris wrapped between the main unit and the
side brushes.
Use a cloth dampened with warm water to remove any dust from the
brushes or to gently reshape them.
TROUBLESHOOTING
Status
LED
Solution
The robot vacuum is on
standby mode or
working normally.
Permanently blue
N/A
The robot vacuum is on
the base and the
battery is charged
Permanently blue
N/A
Cleaning paused
Flashing blue
N/A
The robot vacuum is on
the base and charging
Flashing blue
N/A
Ion function is on
Permanently purple
N/A
The robot vacuum is in
standby mode
Light off
N/A
Floor sensor error
Red light is permanently
on while the robot
vacuum beeps once
One of the floor sensors
has been disrupted.
Check to see if the
robot vacuum is on an
abnormal surface and
reposition.
Side brush error
Red light flashes while
the robot vacuum beeps
once
Check to see if the side
brushes are obstructed.
Fan motor error
Red light permanently
on while the robot
vacuum beeps twice
Check to see if there is
any obstruction to the
air suction.
Abnormal collision
Permanently red while
the robot vacuum beeps
3 times
Check the front
bumper for any
obstructions
15
www.KALORIK.com
RVC 47730 BK - 200605
Overloaded front
wheel
Red light flashes while
the robot vacuum beeps
3 times
Check the front wheel
for any obstructions or
issues
Error with all floor
sensors
Blue light stays on while
the robot vacuum beeps
3 times.
All floor sensors have
been disrupted. May
happen when the
vacuum is picked up
during cleaning.
If additional assistance is needed, please contact our Customer Assistance at
1-888-525-6745.
16
www.KALORIK.com
RVC 47730 BK - 200605
WARRANTY
We suggest that you complete and return the enclosed Product
Registration Card promptly to facilitate verification of the date of
original purchase. However, return of the Product Registration Card is
not a condition of these warranties. You can also fill out this warranty
card online, at the following address: www.KALORIK.com
This KALORIK product is warranted in the U.S.A. and in Canada for 1
year from the date of purchase against defects in material and
workmanship. This warranty is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance.
During this period, if the KALORIK product, upon inspection by KALORIK,
is proven defective, it will be repaired or replaced, at Kalorik’s option,
without charge to the customer. If a replacement product is sent, it will
carry the remaining warranty of the original product.
This warranty does not apply to any defect arising from a buyer's or
user's misuse of the product, negligence, failure to follow KALORIK
instructions noted in the user’s manual, use on current or voltage other
than that stamped on the product, wear and tear, alteration or repair
not authorized by KALORIK, or use for commercial purposes. There is no
warranty for glass parts, glass containers, filter basket, blades and
agitators. There is also no warranty for parts lost by the user.
ANY WARRANTY OF MERCHANTABILITY OR FITNESS WITH RESPECT TO THIS
PRODUCT IS ALSO LIMITED TO THE ONE YEAR LIMITED WARRANTY
PERIOD.
Some states do not allow limitation on how long an implied warranty
lasts or do not allow the exclusion of incidental or consequential
damages, so the above limitations may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights
which vary from state to state.
If the appliance should become defective within the warranty period
and more than 30 days after date of purchase, do not return the
appliance to the store: often, our Customer Service Representatives
can help solve the problem without having the product serviced. If
17
www.KALORIK.com
RVC 47730 BK - 200605
servicing is needed, a Representative can confirm whether the product
is under warranty and direct you to the nearest service location.
If this is the case, send the product via your pre-paid postage back to
Kalorik, along with proof of purchase and a return authorization number
indicated on the outer package, given by our Customer Service
Representatives. Send to the authorized KALORIK Service Center
(please visit our website at www.KALORIK.com or call our Customer
Service Department for the address of our authorized KALORIK Service
Center).
When sending the product, please include a letter explaining the
nature of the claimed defect.
If you have additional questions, please call our Customer Service
Department (please see below for complete contact information),
Monday through Thursday from 9:00am - 5:00pm (EST) and Friday from
9:00am - 4:00pm (EST). Please note hours are subject to change.
If you would like to write, please send your letter to:
KALORIK Customer Service Department
Team International Group of America Inc.
16175 NW 49th Avenue
Miami Gardens, FL 33014 USA
Or call:
Toll Free: +1 888-521-TEAM / +1 888-KALORIK
Only letters can be accepted at this address above. Shipments and
packages that do not have a return authorization number will be
refused.
18
www.KALORIK.com
RVC 47730 BK - 200605
CONSIGNES DE SÉCURITÉ
IMPORTANTES
Lors de l'utilisation d'appareils électriques, des précautions de sécurité de
base doivent toujours être prises, notamment la suivante :
1. Lisez toutes les instructions avant utilisation.
2. Cet appareil peut être utilisé par des enfants à partir de 8 ans et par
des personnes ayant des capacités physiques, sensorielles ou mentales
réduites ou un manque d'expérience et de connaissances si elles sont
surveillées ou formées pour utiliser cet appareil en sécurité et
comprennent les dangers qui peuvent résulter de l’utilisation.
3. Les enfants doivent être surveillés pour s'assurer qu'ils ne jouent pas
avec l’appareil.
4. Le nettoyage et l'entretien ne doivent pas être effectués par des
enfants sans la surveillance d'un adulte.
5. Cet appareil ne doit être utilisé qu'avec l’adaptateur et la base de
charge fournis.
6. N'essayez pas de démonter ou de remplacer la batterie vous-même
car un fonctionnement incorrect peut provoquer une surchauffe, un
incendie ou des blessures.
7. La batterie Li-ion doit être réparée ou recyclée par un fournisseur de
service agréé et doit être recyclée ou éliminée séparément des
déchets ménagers. Mettez la batterie au rebut conformément aux lois
et réglementations environnementales locales.
8. Le cordon de la base de charge ne peut pas être remplacé ; si le
cordon est endommagé, la base de charge doit remplacée.
9. Cet appareil est destiné à un usage intérieur uniquement.
10. Cet appareil n'est pas un jouet. Ne vous asseyez pas et ne vous tenez
pas debout sur cet appareil. Les jeunes enfants et les animaux
domestiques doivent être surveillés lorsque l'appareil fonctionne.
11. Conservez et utilisez cet appareil uniquement dans un environnement
à température ambiante.
12. Nettoyez uniquement avec un chiffon imbibé d'eau.
13. N'utilisez pas cet appareil pour ramasser quelque chose qui brûle ou
qui fume.
14. N'utilisez pas cet appareil pour ramasser des déversements d'eau de
Javel, de peinture, de produits chimiques ou de tout autre produit
mouillé.
19
www.KALORIK.com
RVC 47730 BK - 200605
15. Avant d'utiliser cet appareil, ramassez des objets tels que les vêtements
et le papier qui traîne. Soulevez les cordons des rideaux ou des stores et
écartez les cordons d'alimentation et les objets fragiles du chemin. Si
cet appareil passe sur un cordon d'alimentation et le tire, un objet
pourrait tomber d'une table ou d'une étagère.
16. Si la pièce à nettoyer possède un balcon, une barrière physique doit
être installée pour empêcher l'accès au balcon et ainsi assurer un
fonctionnement sécuritaire.
17. Ne rien placer sur cet appareil.
18. Soyez conscient que cet appareil se déplace tout seul. Soyez prudent
lorsque vous marchez dans la zone où cet appareil fonctionne afin
d'éviter de marcher dessus.
19. N'utilisez pas cet appareil dans des endroits où il y a des prises de
courant au sol.
20. N'exposez pas l'électronique de cet appareil, sa batterie ou la base de
chargement. Il n'y a pas de pièces réparables par l'utilisateur à
l'intérieur.
21. N'utilisez pas cet appareil sur un sol non fini, non scellé, ciré ou rugueux.
Cela pourrait endommager le plancher et l'appareil. Ne l'utilisez que sur
des sols durs ou des moquettes à poils ras.
22. Cet appareil a été conçu pour être utilisé sur les sols sans les rayer. Nous
vous recommandons toujours de tester l’appareil sur une petite surface
de la pièce à nettoyer afin de vous assurer qu'il n'y a pas de rayures
avant de nettoyer toute la pièce.
CONSERVEZ CES INSTRUCTIONS
USAGE DOMESTIQUE SEULEMENT
20
www.KALORIK.com
RVC 47730 BK - 200605
VOTRE ASPIRATEUR ROBOT IONIQUE AIR PUR
PRO
Affrontez les dégâts quotidiens sans jamais lever le petit doigt ! Ce petit robot
utile - et nouveau membre le plus ordonné de votre foyer - fait disparaître la
saleté avant même que vous ne sachiez qu'elle existe. L'Aspirateur Robot
Ionique Air Pur Pro Kalorik Home nettoie votre maison de fond en comble,
laissant non seulement vos sols impeccables, mais aussi l'air de votre maison !
La technologie Ionique Air Pur exploite la puissance des ions négatifs qui
attirent magnétiquement les polluants atmosphériques pour les éliminer de l'air
que vous respirez. La filtration HEPA avancée fournit un support supplémentaire
pour capturer la poussière et les allergènes. L'aspiration à grande vitesse et les
doubles brosses rotatives multi-surfaces détachent et soulèvent la poussière, la
saleté, les cheveux et les débris pour des sols et des tapis immaculés.
Nettoyage d'endurance avec retour automatique nettoie jusqu'à 90 minutes
avant de retourner automatiquement à la base pour se connecter et se
recharger. Aspirateur Robot Ionique Air Pur Pro Kalorik Home garde un profil
bas, à la fois dans sa conception mince et ses émissions sonores réduites. Il
nettoie rapidement sous les meubles bas, les lits, les canapés et autres endroits
difficiles à atteindre où la poussière se cache. La connectivité WiFi vous permet
de démarrer facilement le nettoyage depuis votre téléphone, ou avec la
commande vocale via Amazon Alexa ou Google Assistant. Les capteurs anti-
collision et la cartographie gyroscopique naviguent intelligemment dans votre
maison, en évitant les escaliers, les rebords et les obstacles pour un nettoyage
complet et précis. Les modes de nettoyage comprennent: Intelligent, Spirale,
Suivi de Murs, Manuel et Retour à la base de charge.
COMPOSANTS DE L'UNITÉ PRINCIPALE
Récepteur de signal
Pare chocs
Bouton d'alimentation
Couvercle du bac à
poussière
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

KALORIK RVC 47730 BK Manuel utilisateur

Catégorie
Aspirateurs robotiques
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues