Breville The Grind Control Manuel utilisateur

www.breville.com

USA

Mail: Breville USA

19400 S. Western Ave

Torrance CA

90501-1119

Phone: 1-866-273-8455

1-866-BREVILLE

Web:

brevilleusasupport.com

Canada

Mail: Breville Canada

3595 Boulevard Cote-Vertu,

Saint-Laurent,

Québec H4R 1R2

Phone:

1-855-683-3535

Email:

askus@breville.ca

Breville Consumer Support

Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.

Copyright Breville Pty. Ltd. 2016.

Due to continued product improvement, the products illustrated/photographed

in this book may vary slightly from the actual product.

BDC650 USC E20

BDC650BSS_USC_IB_E20_FA.indd 1 24/1/20 9:41 am

BDC650

the Grind Control

™

Instruction Book - Manuel d’instructions

BDC650BSS_USC_IB_E20_FA.indd 2 24/1/20 9:41 am

CONGRATULATIONS

on the purchase of your Breville product

USA Consumers: www.brevilleusa.com

Canadian Consumers: www.breville.ca

Register online for product support

and exclusive offers.

*

*Registering is not a substitute for proof of purchase when submitting a Warranty Claim.

BDC650BSS_USC_IB_E20_FA.indd 2 24/1/20 9:41 am

3

CONTENTSCONTENTS

4 Breville recommends safety ﬁrst

8 Know your Breville product

10 Operating your Breville product

12 Using the Grind Control™

- Carafe Mode

15 Using the Grind Control™

- Single Cup Mode

17 Programming the Clock

& Auto Start

20 Advanced Features

21 Helpful Tips

23 Care & cleaning

27 Troubleshooting

34 French

BDC650BSS_USC_IB_E20_FA.indd 3 24/1/20 9:41 am

4

BREVILLE RECOMMENDS SAFETY FIRSTBREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with

the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise

a degree of care when using any electrical appliance and adhere to the following precautions.

READ ALL INSTRUCTIONS

• Carefully read all instructions

before operating the

appliance and save for future

reference.

• Remove and safely discard

any packaging material,

plastic power plug cover, and

any removable labels before

using appliance.

• If the appliance is to be:

- left unattended

- cleaned

- moved

- assembled; or

- stored

unplug the unit from the

power outlet.

• Always operate the appliance

on a stable and heat resistant

surface.

• Do not place the appliance

on or near a hot gas burner,

electric element or where it

could touch a heated oven.

• Ensure the unit has at least

4 inches (10cm) of clearance

from all side panels.

• Do not operate the appliance

without water in the water

tank. Use only cold, preferably

ﬁltered water. Do not ﬁll the

appliance with any other

liquids.

• Ensure the supplied gold tone

ﬁlter or a paper ﬁlter (8-12 cup,

ﬂat base basket style with ~

3¼"/8.25cm base) is placed in

the coffee basket before using

the appliance. Do not use the

gold tone ﬁlter in conjunction

with a paper ﬁlter.

• Before starting a brew cycle:

- Completely empty the

carafe and securely lock

the carafe lid in place.

- Push in and seat the carafe

under the drip stop.

- Ensure the ﬁlter basket is

empty and properly ﬁt in

place.

During a brew cycle:

- Do not remove the carafe

or open the basket door

while the unit is in a brew

cycle. Failure to follow the

above may lead to scalding

or serious injury.

IMPORTANT SAFEGUARDS

BDC650BSS_USC_IB_E20_FA.indd 4 24/1/20 9:41 am

5

BREVILLE RECOMMENDS SAFETY FIRSTBREVILLE RECOMMENDS SAFETY FIRSTBREVILLE RECOMMENDS SAFETY FIRST

• Some surfaces may be hot,

use caution when touching or

lifting the unit or accessories.

• Only lift the carafe from the

carafe handle.

• The carafe is designed for

use with this appliance only.

It must never be used on a

range top or in a microwave.

• Scalding may occur if the

carafe lid is removed during

the brewing cycle.

• Always ensure the carafe

lid is securely locked in

place onto the carafe before

pouring.

• Do not use the carafe with a

cracked, loose, weakened or

damaged handle.

• Do not touch hot surfaces.

Use the handle for lifting and

carrying the carafe.

• Do not set a hot carafe on a

wet, cold or heat sensitive

surface.

• Do not operate the grinder

without the bean hopper lid in

position. Keep ﬁngers, hands,

hair, clothing and utensils

away from the bean hopper

during operation. Avoid

contact with moving parts.

• Check the grinder for

presence of foreign objects

before using.

• Use the grinder to grind

roasted coffee beans only.

• Unplug from outlet when the

appliance or display clock

is not in use, and before

cleaning and storing. Allow

to cool before putting on or

taking off parts, and before

cleaning the appliance.

• Do not use harsh or abrasive

materials when cleaning any

part of this appliance such as

steel wool or scoring pads.

• The use of attachments

not sold or recommended

by Breville may cause ﬁre,

electric shock or injuries.

BDC650BSS_USC_IB_E20_FA.indd 5 24/1/20 9:41 am

6

BREVILLE RECOMMENDS SAFETY FIRSTBREVILLE RECOMMENDS SAFETY FIRST

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS FOR

ALL ELECTRICAL APPLIANCES

• Fully unwind cord before use.

• To protect against electric

shock, do not immerse cord,

plug or appliance in water or

any other liquid.

• Do not let the cord hang over

the edge of a bench or table,

touch hot surfaces, or become

knotted.

• Do not leave the appliance

unattended when in use.

• Children should be

supervised to ensure they do

not play with the appliance.

• This appliance is

recommended for household

use only. Do not use this

appliance for anything other

than its intended use. Do not

use in moving vehicles or

boats. Do not use outdoors.

• It is recommended to

regularly inspect the

appliance. Do not use the

appliance if the power supply

cord, power plug, or appliance

becomes damaged in anyway.

Immediately stop using

the unit and call Breville

Consumer Service.

CAUTION

We recommend using cold, ﬁltered

water. We do not recommend the use of

de-mineralized or distilled water as this

may affect the taste of brewed coffee and

how the coffee machine is designed to

function.

BDC650BSS_USC_IB_E20_FA.indd 6 24/1/20 9:41 am

7

BREVILLE RECOMMENDS SAFETY FIRST

SHORT CORD INSTRUCTIONS

Your Breville appliance is

ﬁtted with a short power cord

to reduce the risk of personal

injury or property damage

resulting from pulling, tripping

or becoming entangled with a

longer cord. Longer detachable

power cords or extension cords

are available and may be used if

care is exercised. If an extension

cord is used, (1) the marked

electrical rating of the cord set or

extension cord should be at least

as great as the electrical rating

of the appliance, (2) the cord

should be arranged so that it will

not drape over the counter-top

or table where it can be pulled

on by children or tripped over

unintentionally and (3) the

extension cord must include a

3-prong grounding plug.

NOTE

This appliance has a three wire

grounded plug. To reduce the risk of

electric shock, this plug will ﬁt in a

polarized outlet only one way. If the

plug does not ﬁt properly into the

outlet, contact a qualiﬁed electrician.

Do not use an adaptor or modify the

plug in any way. Do not connect the

appliance to an external switch or

device (such as a timer, monitor or

remote circuit) that can be switched on

and off.

BREVILLE ASSIST

‰

PLUG

Your Breville appliance comes

with a unique Assist

‰

Plug,

conveniently designed with a

ﬁnger hole to easy removal from

the power outlet.

CALIFORNIA PROPOSITION 65:

(Applicable to California

residents only).

This product contains chemicals

known to the State of California

to cause cancer, birth defects or

other reproductive harm.

BDC650BSS_USC_IB_E20_FA.indd 7 24/1/20 9:41 am

8

KNOW YOUR BREVILLE PRODUCTKNOW YOUR BREVILLE PRODUCT

1. Bean Hopper Lid

2. 0.5lb Bean Hopper

3. Bean Hopper Locking System seals the

base of the bean hopper for easy removal

and transfer of coffee beans for storage.

4. Grind Adjustment Knob, adjusts

coarseness and/or ﬁneness from one

of the 6 settings.

5. Cleaning Brush for cleaning of the

grinding burrs and coffee grinds chute.

6. Integrated Adjustable Burr Grinder

grinds whole beans just prior to brewing

for maximum ﬂavor and aroma. Grinder

can be turned off when using pre-ground

coffee.

7. 12-Cup (60oz) Water Tank with

ﬂip-top lid for convenient, front-access

ﬁlling. Grille prevents large debris from

entering the tank while the ‘MAX’ level

ﬂoat rises when the tank is full.

8. Intuitive simple to operate Control

Panel with backlit LCD screen.

9. Coffee Grinds Chute delivers ground

coffee from the grinder to the coffee

basket.

10. Removable Grinds Catcher catches

loose grinds.

11. Carafe Lid.

12. 12-Cup Double-Wall, Stainless Steel

Thermal Carafe

13. Removable Gold Tone Filter

14. Soft Opening, Swing-Out Door with

safety interlock system prevents

operation if the coffee basket is not

correctly assembled or the door is not

properly closed.

15. Removable Coffee Basket lifts out for

easy ﬁlling and cleaning. Holds the

included gold tone ﬁlter or paper ﬁlters.

1

2

3

4

5

7

8

9

11

12

14

15

16

17

18

13

6

10

All parts of the

Grind Control™

that come into

contact with

coffee and water

are BPA Free.*

BDC650BSS_USC_IB_E20_FA.indd 8 24/1/20 9:41 am

9

KNOW YOUR BREVILLE PRODUCTKNOW YOUR BREVILLE PRODUCT

16. Steam Bafﬂe diverts water overﬂow if

the coffee basket becomes blocked.

17. Brew Pause Drip Stop temporarily

ceases the ﬂow of coffee when the

carafe is removed so a cup can be

poured mid-brew.

18. Drip Tray can be removed for direct

brewing into tall cups & travel mugs.

19. OPEN button. Press to open the

swing-out door.

20. MENU | EXIT button

Access the Menu to allow you:

- Set the clock.

- Adjust the Alert volumes.

- Reset the machine.

- Enter the Calibration Mode.

- Hold for 2 seconds to enter

standby mode.

21. CUP | CARAFE button. Press to brew

a single cup of coffee or a carafe.

22. STRENGTH button. Rotate to select

from one of the 8 strength settings, or

Pre-ground.

23. Auto Start button

Allows you turn the Auto Start feature

On & Off & adjust Auto Start time.

24. START | CANCEL button

Press to start or cancel the brew cycle.

AUTO

START

CUP CARAFE

START CANCEL

STRENGTH

OPEN

MENU

EXIT

19 24

20 21 23 23

BDC650BSS_USC_IB_E20_FA.indd 9 24/1/20 9:41 am

10

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

BEFORE FIRST USE

Unpack all parts and accessories before

removing and safely discarding all packaging

material and promotional labels. Ensure the

power cord is unplugged from the power outlet.

Wipe the exterior stainless steel housing with

a soft, damp cloth. Wash the bean hopper and

lid, coffee basket, gold tone ﬁlter and carafe in

warm, soapy water and a soft cloth. Do not use

abrasive cleansers, pads or cloths which can

scratch the surface. Rinse and dry thoroughly.

INITIAL SET UP

1. Install the Bean Hopper

Position the hopper onto the machine. Turn the

locking knob clockwise in the direction of the

LOCK arrow until it clicks. Fill the hopper with

fresh beans.

We recommend always keeping the hopper full

(0.5lb maximum) to ensure there are sufﬁcient

beans. However, never over-pack the hopper

as this may result in the grinder jamming.

Replace the hopper lid.

NOTE

For easy removal, transfer and storage

of beans, the hopper can be removed

by turning the locking knob counter-

clockwise in the direction of the UNLOCK

arrow. If you have removed the hopper,

ensure it is securely reassembled back

onto the machine. The safety interlock

system will prevent operation if the

hopper is incorrectly assembled. The LCD

screen will ﬂash ‘LOCK BEAN HOPPER’

until the issue is resolved.

FRESH IS BEST

To get the most out of your Grind Control™

coffee brewer we recommend using quality

freshly roasted whole bean coffee & grind right

before you brew. Coffee is at its peak ﬂavor

potential 5-20 days after roasting. Always buy

coffee with a “Roasted On” date printed on

the bag and avoid buying coffee with a “Best

Before” or “Use By” date, as you never know

when it was roasted. Coffee loses ﬂavor and its

aromatics once it’s ground, so grinding right

before you brew is the key to great tasting

coffee with superior ﬂavor and aroma.

PRODUCT OVERVIEW

Your Grind Control™ coffee brewer is the ﬁrst

drip coffee maker with an adjustable built-in

grinder and calibration mode.

The adjustable grinder features machined

stainless steel burrs that allow you to adjust

the coarseness or ﬁneness to optimize ﬂavor

balance.

The calibration mode allows you adjust the

amount of coffee delivered on any strength/

cup size setting to suit coffee of varying grind

size, origins, age and degree of roast, so you

can achieve the maximum ﬂavor potential from

any coffee you choose.

The Grind Control™ also allows you to brew a

single cup or travel mug in “cup” mode or from

2 to 12 cups in “carafe” mode.

BDC650BSS_USC_IB_E20_FA.indd 10 24/1/20 9:41 am

11

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

2. Plugging in the Power Cord

Unwind the power cord completely and insert

the power plug into a grounded 110-120V

power outlet. The LCD screen will illuminate.

NOTE

The coffee machine will enter POWER

SAVE mode after remaining idle for

5 minutes. Press any button to exit

POWER SAVE mode and re-start the

machine. Hold Menu/Exit button for

2 seconds to enter standby mode.

3. Install the Coffee Basket

For best results, we recommend pre-heating

the coffee basket by running it under hot tap

water. Dry the coffee basket thoroughly, taking

particular care to completely dry the chute

area. Line the coffee basket with either the

provided gold tone ﬁlter or a paper ﬁlter.

Never use both at the same time.

a) Provided gold tone ﬁlter. When using

the gold tone ﬁlter, be sure that the

handle is positioned towards the hinge

area of the coffee basket. Otherwise the

handle may interfere with the ﬂow of

ground coffee into the gold tone ﬁlter.

HANDLE TOWARDS

COFFEE BASKET HINGE

ENSURE CHUTE

AREA IS

COMPLETELY DRY

b) Paper ﬁlter Use an 8-12 cup, ﬂat base

basket style paper ﬁlter with ~ 3¼"/8.25cm

base. Ensure that the paper ﬁlter is

completely open and touching the side

walls and bottom of the coffee basket.

Close the coffee basket lid. Press the OPEN

button to open the swing-out door.

Attach the coffee basket to the swing-out door

by ensuring the hinge area of the coffee basket

is ﬁrmly seated in its most downward position

on the two door hooks. Close the door until it

clicks shut.

CLICK

BDC650BSS_USC_IB_E20_FA.indd 11 24/1/20 9:41 am

12

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

USING THE GRIND CONTROL™

- CARAFE MODE

First Time Use Only

We recommend ﬂushing the machine to

remove any dust particles or residue from the

manufacturing process. Follow the proceeding

instructions, ensuring to completely ﬁll the

water tank. Step 1 (below) , select ‘12 CUPS’.

(Step 2, below) and the ‘PRE-GROUND’ coffee

setting. (Step 4, page 13). However do not

add any coffee to the coffee basket. Once

the cycle is complete, discard the water from

the carafe and repeat the cycle again for best

results. The machine is now ready to use.

1. Fill the Water Tank

Press the ﬂip-top lid to open. Pour the desired

amount of cold, preferably ﬁltered water into

the tank using a jug or the provided carafe.

Never use Distilled, De-mineralized or

highly ﬁltered water as this will affect the

electronics and the taste of your coffee.

If using the carafe, ensure the carafe is clean

and the carafe lid is securely locked in place.

The LCD screen will indicate the amount of

water in the tank as it is ﬁlled. The machine will

beep when full and the water level ﬂoat will rise

to indicate the maximum level. Do not exceed

the 12 cup maximum. Doing so may cause the

carafe to overﬂow or water spillage at the back

of the machine. Close the ﬂip-top lid.

NOTE

Always ensure your carafe is clean

before brewing. Residual coffee will

affect the taste of your next cup.

NOTE

Check the water level on the LCD

screen before use. We recommend

always keeping the water tank full. The

water tank should be reﬁlled with cold,

preferably ﬁltered water. Never ﬁll with

de-mineralized water or any other liquid.

NOTE

Never pour water into the bean hopper

or grinding chamber area. Doing so can

cause the grinder to clog. Only

re-commence use when the grinding

chamber and grinding burrs are

completely dry. Refer to Troubleshooting,

‘Moisture clogging grinder’, page 26.

NOTE

Never ﬁll the water tank once the coffee

machine has started a brewing cycle.

This will affect the volume dispensed

into the carafe.

2. Pre-Warm the Carafe

A warm carafe will help maintain the coffee’s

optimal temperature and keep coffee hotter

for longer. Remove the carafe lid by turning

counter-clockwise then lifting upwards.

Fill the carafe with hot water and leave to stand

for about 30 seconds then discard the water.

To lock the carafe lid back into position, align

the arrow on the carafe lid with the ALIGN

arrow on the carafe. Turn clockwise until the

arrow on the carafe lid aligns with the LOCK

arrow on the carafe. This ensures that the lid is

closed and in the proper position for brewing

and pouring. Place the carafe into position

under the drip stop outlet.

BDC650BSS_USC_IB_E20_FA.indd 12 24/1/20 9:41 am

13

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

ALIGN

ARROWS

THEN TURN TO LOCK

NOTE

Ensure the carafe is clean and completely

empty and the lid is securely locked in

place before placing under the drip stop

outlet. Starting a brew cycle with water

or coffee in the carafe will cause the

carafe to over ﬂow.

3. Select ‘Carafe’ Mode

Press the CUP|CARAFE button. The LCD

screen will display a Carafe symbol and the

current number of cups selected. Rotate the

CUP | CARAFE dial to select the required

number of cups to brew. You can choose less

than the current tank level (2 cup minimum),

while the maximum is the amount of water

in the tank, up to 12 cups. If you select cups

greater than the level in the water tank, the

LCD will display FILL TANK and the water

tank symbol will ﬂash.

4. Select the Brew Strength or

‘PRE-GROUND’ Coffee Setting

There are 8 Strength settings. The LCD

screen will display the current strength

setting. Rotate the STRENGTH dial to select

your required Strength. 1 is the weakest and

8 is the strongest. We recommend starting

on setting 4 for a medium strength coffee.

Adjust strength higher or lower to suit

your taste.

NOTE

If using pre-ground coffee, rotate the

STRENGTH dial to select the

‘PRE-GROUND’ coffee setting.

This will disable the burr grinder.

Add pre- ground coffee to the gold tone

ﬁlter or a paper ﬁlter.

We recommend 1 level tablespoon of

pre-ground coffee per 5oz/150ml cup

of water. Adjust the amount according

to your individual taste. The maximum

capacity for pre-ground coffee is

12 level tablespoons. Exceeding this

amount may cause overﬂow.

5. Start the Brew Cycle

Press the START | CANCEL button.

The grinder will commence grinding the

correct amount of coffee for the selected brew

size and strength. If the ‘PRE-GROUND’

coffee setting has been selected, the grinder

will be disabled.

NOTE

Steam may emit from the rear steam

vent during grinding and brewing.

This is normal.

BDC650BSS_USC_IB_E20_FA.indd 13 24/1/20 9:41 am

14

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

The count-down timer will then begin.

The time displayed is an estimate only and will

depend on the brew size and strength settings

you have selected.

The LCD screen will display:

a) ‘PRE-HEATING’ as the water is heated

to the optimal temperature. The pre-

heating time will depend on the starting

temperature of the water in the water tank.

b) ‘BREWING’ as the coffee is dispensed into

the carafe.

To stop the cycle at any time, press the

START | CANCEL button. You will hear a

winding noise. This is normal.

CAUTION

Never open the swing-out door and

remove the coffee basket while brewing.

Hot water and coffee can cause injury.

The coffee basket and gold tone or paper

ﬁlter may still be very hot after brewing.

Use caution and allow to cool before

removing.

Hot steam may rise when pouring.

The bottom of the carafe is hot to touch

for several minutes after brewing.

Use caution and ensure not to set the

carafe on a heat sensitive surface.

6. Using the Brew Pause Feature

The Brew Pause feature temporarily ceases the

ﬂow of coffee when the carafe is removed so a

cup can be poured mid-brew. Do not remove

the carafe for longer than 20 seconds or the

coffee may overﬂow the coffee basket.

7. Empty the Coffee Basket

Once the brewing cycle is complete, the ready

signal will sound and a winding noise will be

heard. This is normal. The coffee machine will

automatically shut-off and the LCD screen will

ﬂash ‘EMPTY COFFEE FILTER’ as a reminder

to remove the coffee basket and discard the

used grinds. Wash the coffee basket, taking

particular care to rinse the chute area. Then dry

the coffee basket and chute area thoroughly.

We also recommend checking the coffee

grinds chute disc for any build-up of coffee

grinds. This is the stainless steel disc that is

visible when the swing-out door is opened.

A build-up of grinds on this disc can affect the

performance of the machine. Wipe the disc

clean then dry thoroughly.

BDC650BSS_USC_IB_E20_FA.indd 14 24/1/20 9:41 am

15

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

8. Pour and Enjoy

Ensure the carafe lid is securely locked in

position. There is no need to turn or adjust the

lid before pouring. The lid automatically opens

when pouring so as to keep coffee hot.

9. When Not In Use

The LCD screen will go dim after

5 minutes of none operation.

USING THE GRIND CONTROL™

- SINGLE CUP MODE

1. Fill the Water Tank

Press to open the ﬂip-top lid. Pour the desired

amount of cold, preferably ﬁltered water into

the tank using a jug or the carafe. Never use

Distilled, De-mineralized or highly ﬁltered

water as this will affect the electronics and

the taste of your coffee.

The LCD screen will indicate the amount of

water in the tank as it is ﬁlled. The machine will

beep when full and the water level ﬂoat will rise

to indicate the maximum level. Do not exceed

the 12 cup maximum. Doing so may cause

water spillage at the back of the machine. Close

the ﬂip-top lid.

NOTE

Check the water level on the LCD

screen before use. We recommend

always keeping the water tank full. The

water tank should be reﬁlled with cold,

preferably ﬁltered water. Do not ﬁll

with any other liquid.

NOTE

Never pour water into the bean hopper

or grinding chamber area.

Doing so can cause the grinder to

clog. Only re-commence use when the

grinding chamber and grinding burrs

are completely dry.

Refer to Troubleshooting, ‘Moisture

clogging grinder’, page 26.

Never ﬁll the water tank once the coffee

machine has started a brewing cycle.

This will affect the volume dispensed

into the cup.

2. Pre-Warm the Cup or Travel Mug

A warm cup will help maintain the coffee’s

optimal temperature and keep coffee hotter

for longer. Fill the cup with hot water for about

30 seconds then discard the water. Place the

cup into position under the drip stop outlet.

TIP

For taller cups and travel mugs, remove

the drip tray at the base of the machine.

Press the OPEN button to open the

swing-out door. Insert the cup/mug

into the drip tray cavity before closing

the swing-out door. The maximum cup/

mug dimensions are 7.5" height, 2¾"

diameter.

REMOVE DRIP TRAY, OPEN DOOR,

INSERT CUP, CLOSE DOOR.

BDC650BSS_USC_IB_E20_FA.indd 15 24/1/20 9:41 am

16

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

3. Select ‘Single Cup’ Mode

Press the CUP|CARAFE dial until the LCD

screen displays the CUP symbol and the

current cup size selected in ounces. Rotate the

CUP|CARAFE dial to select the required size.

There are 7 size options to accommodate

for different amounts or milk, half-and- half

and creamer. Always ensure your cup is an

adequate size for the setting selected.

The amounts displayed on the LCD screen

are approximate only. Actual amounts may

vary depending on the type of ﬁlter used, the

coffee grind size, roast, blend and freshness, or

amount and type of pre-ground coffee used.

4. Select the Brew Strength or

‘PRE-GROUND’ Coffee Setting

There are 8 strength settings. The LCD screen

will display the current strength setting. Rotate

the STRENGTH dial to select your required

strength. 1 is the weakest and 8 is the strongest.

We recommend starting on setting 4 for a

medium strength coffee. Adjust strength

higher or lower to suit your taste.

NOTE

If using pre-ground coffee, select the

‘PRE-GROUND’ coffee setting. This will

disable the grinder. Add pre-ground

coffee to the gold tone ﬁlter or a paper

ﬁlter. We recommend 1 level tablespoon

of pre-ground coffee per 5oz/150ml cup

of water. Adjust the amount according

to your individual taste. The maximum

capacity for pre-ground coffee is 12 level

tablespoons. Exceeding this amount may

cause overﬂow.

5. Start the Brew Cycle

Press the START | CANCEL button.

The grinder will commence grinding the

correct amount of coffee for the selected brew

size and strength. If the ‘PRE-GROUND’

coffee setting has been selected, the grinder

will be disabled.

NOTE

Steam may emit from the rear steam vent

during grinding and brewing. This is

normal.

The count-down timer will then begin. The

time displayed is an estimate only and will

depend on the amount and strength settings

you have selected. The LCD screen will display:

a) ‘PRE-HEATING’ as the water is heated

to the optimal temperature. The

pre-heating time will depend on the

starting temperature of the water in

the water tank.

b) ‘INFUSING’ as coffee and water are

steeped together.

c) ‘BREWING’ as the coffee is dispensed

into the cup.

BDC650BSS_USC_IB_E20_FA.indd 16 24/1/20 9:41 am

17

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

To stop the cycle at any time, press the

START | CANCEL button. You will hear

a winding noise. This is normal.

CAUTION

Never open the swing-out door and

remove the coffee basket while brewing.

Hot water and coffee can cause injury.

6. Empty the Coffee Basket

Once the brewing cycle is complete, the ready

signal will sound and a winding noise will be

heard. This is normal.

The coffee machine will automatically shut-off,

however the LCD screen will ﬂash ‘EMPTY

COFFEE FILTER’ as a reminder to remove

the coffee basket and discard the used grinds.

Wash the coffee basket, taking particular care

to rinse the chute area. Then dry the coffee

basket and chute area thoroughly.

We also recommend checking the coffee

grinds chute disc for any build-up of coffee

grinds. This is the stainless steel disc that is

visible when the swing-out door is opened.

A build-up of grinds on this disc can affect the

performance of the machine. Wipe the disc

clean then dry thoroughly.

7. When Not In Use

LCD screen will dim after 5 minutes of none

operation.

CAUTION

The coffee basket, gold tone or paper

ﬁlter may still be very hot after brewing.

Use caution and allow to cool before

removing.

NOTE

If using the gold tone ﬁlter, you may

notice the brewing cycle ﬁnish before

the ready signal sounds. This is normal.

The total brewing time displayed on the

LCD screen is calculated using paper

ﬁlters as coffee passes through paper

ﬁlters slower.

PROGRAMMING THE CLOCK

(OPTIONAL)

1. Press the MENU|EXIT button.

2. Press the STRENGTH dial. The LCD

screen displays the current time,

ﬂashing.

3. Rotate the STRENGTH dial to adjust

the time.

4. Press the STRENGTH button to set.

The machine will beep to conﬁrm.

5. The LCD will return to the main screen

when the clock is set.

BDC650BSS_USC_IB_E20_FA.indd 17 24/1/20 9:41 am

18

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

PROGRAMMING AUTO START

(OPTIONAL)

The Auto Start feature allows you to program

the speciﬁc time when the coffee machine will

automatically turn on and start the grinding

and brewing cycle.

You must set the clock to use the Auto Start

feature. Always remember to reset the clock for

time changes, power outages and when you

unplug the machine.

1. Press the AUTO START button.

The current Auto Start time will be

displayed and ﬂashing.

2. Rotate the STRENGTH dial to adjust

the time you want the brewer to start.

3. Press the STRENGTH button to set the

Auto Start time. The machine will beep

to conﬁrm.

NOTE

If you have not set the clock time, please

follow the instructions below.

4. The current clock time will ﬂash on the

LCD. Rotate the STRENGTH button

to set the current clock time. Press the

STRENGTH button to conﬁrm.

5. The machine will now automatically

start the brew cycle at the time

you’ve set.

6. Make sure you have:

• Enough water in the tank.

• Selected the number of cups you wish

to brew.

• Set the strength.

• Fill hopper with fresh beans.

• A fresh ﬁlter paper in the brew basket

& the drawer is closed.

• A clean, empty carafe under the brew

basket.

7. If ‘AUTO START ON’ does not appear,

then the Auto Start feature has not be

activated.

8. To cancel the Auto On after it’s been

set, press the AUTO START button

once.

NOTE

The Auto Start feature must be selected

each time you want to pre-schedule a

brew. Press the AUTO START button

and the programmed Auto Start time

will display on the LCD screen. The Auto

Start feature will not be activated unless

there is adequate amount of water in the

machine for the selected brew volume.

NOTE

Always remember to reset the clock

and Auto Start time when there is a

time change, power outage or after you

unplug the machine.

BDC650BSS_USC_IB_E20_FA.indd 18 24/1/20 9:41 am

19

OPERATING YOUR BREVILLE PRODUCTOPERATING YOUR BREVILLE PRODUCT

CHANGING THE ‘READY’

SIGNAL VOLUME

The volume of the ‘Ready’ signal can

be changed to suit your preference.

There are 3 options:

1. Press the MENU|EXIT button.

2. Rotate the STRENGTH dial to SOUND.

3. Press the STRENGTH dial to select

SOUND.

4. SOUND and the current setting will be

displayed, ﬂashing.

5. Rotate the STRENGTH to select your

setting.

6. Press the STRENGTH dial to conﬁrm.

The machine will beep to conﬁrm.

7. LCD will return to the main screen.

MANUAL STANDBY MODE

Press and hold Exit/Menu button for 2 seconds

to activate standby mode.

BDC650BSS_USC_IB_E20_FA.indd 19 24/1/20 9:41 am

La page charge ...

Breville The Grind Control Manuel utilisateur

Breville The Grind Control Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents