Jensen VM9224 Manuel utilisateur

EJECT

VM9224

Operating Instructions

160

watts peak

40W x 4

iii

VM9224

CONTENTS

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s

manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to

use all the features of your new Jensen VM9224 Mobile Multimedia Receiver for maximum

enjoyment.

Features................................................................................................................................ 1

Controls and Indicators ......................................................................................................... 4

Remote Control..................................................................................................................... 6

Operating Instructions......................................................................................................... 14

Setup Menu......................................................................................................................... 18

Tuner Operation.................................................................................................................. 24

DVD/VCD Video Operation................................................................................................. 28

DVD/CD Audio Operation ................................................................................................... 35

MP3/WMA Operation.......................................................................................................... 38

iPod Operation.................................................................................................................... 43

Bluetooth Operation............................................................................................................ 47

Troubleshooting .................................................................................................................. 54

Specifications...................................................................................................................... 58

iv

VM9224

1

VM9224

FEATURES

Congratulations on your purchase of the Jensen VM9224 Mobile Multimedia

Receiver.

It’s a good idea to read all of the instructions before beginning the installation.

We recommend having your Jensen VM9224 installed by a reputable

installation shop.

DVD

• Aspect Ratio - Full and Normal

• Fast Forward - 2X, 4X, 8X and 20X

• Slow Motion - 2X, 4X, 8X and 20X

• Play, Pause, Stop, Next Chapter and Previous Chapter

CD / MP3 / WMA

• CD-Text Compatible

• ID3 Tag Compatible

• Directory Search (MP3 / WMA Only)

• Direct Track Access via Remote Control

• Burn up to 1500 MP3 and WMA Files onto a DVD+

R / RW

• Audible Forward / Reverse Track Search (CD-DA Only)

• Random, Repeat and Intro

• Play, Pause, Stop, Next Track and Previous Track

AM-FM

• USA / Europe / Latin America / Asia Frequency Spacing

• 30 Station Presets (18 FM / 12 AM)

• Auto Stereo / Mono

• Local / Distance

• Auto Store / Preview Scan

iPod

• iPod via USB

• High Speed Direct Connect Interface to Access iPod Playlists, Artists,

Albums and Songs. Play music and view video/photo* files from your iPod.

*Video/photo playback requires jLink-USB iPod interface cable (sold

separately).

• Power Management Charges iPod while Connected

Chassis

• 2.0 DIN (Import / ISO-DIN Mountable)

• Fixed Front Panel

• 6.2" High Definition TFT LCD

• 1,152,000 Sub Pixels (800x3 X 480)

• Beep Tone Confirmation (ON-OFF Option)

• Heat Management System - Forced Air-Cooling To Keep The Chip-Sets

Operating at Nominal Temperatures

2

VM9224

General

• Navigation Ready (NAV102)

• Bluetooth Ready (with purchase of BTM10) providing hands-free profile for

safety / convenience and A2DP profile for streaming music from a PDA /

PMP

• 44-Key Infrared Remote Control

• One Composite Video Output for Additional Screens

• Front Panel Audio/Video Input

• Three-Band Tone control (Bass, Mid and Treble) with Eight Preset EQ

Curves

• Front Panel A/V Aux Input for Portable Media Devices

• Front, Rear and Subwoofer Line Output

• Programmable Volume Control

• Rear Camera Input (Normal and Mirror Image View)

• Touch Screen Calibration Mode

• 2VRMS Line Output - All Channels

• Rotary Encoder Audio Control

• SWC Interface – Compatible with PAC adapter SWI-PS Steering Wheel

Control Interface, sold separately

Optional Equipment

• NAV102

The VM9224 is "navigation ready." Before accessing any navigation

features, you must purchase and install the navigation module (NAV102).

All installation and operating instructions will be included with the

navigation module.

Once the navigation module is connected and operating properly, the NAV

source mode will become active. While the navigation module is not

installed, the NAV option appears gray, indicating the function is not

available.

• BTM10

Before you can connect to a Bluetooth enabled device, you must purchase

and install the Jensen BTM10.

• Bluetooth Phone

See “Bluetooth Operation” on page 47.

• Rear Camera

The VM9224 is "camera ready." Before accessing any camera features,

you must purchase and install a rear video camera. Once the rear camera

is connected and operating properly, the CAMERA source mode will

become active. While the camera is not installed, the CAMERA option

appears gray, indicating the function is not available.

3

VM9224

WARNING! Never install this unit where operation and viewing could

interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except when using for

rear view video camera) never use the video display function while

driving the vehicle. This is a violation of federal law.

WARNING! Never disassemble or adjust the unit.

WARNING! To prevent injury from shock or fire, never expose this unit to

moisture or water.

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside this unit, avoid

impact to the TFT monitor.

WARNING! The monitor employs an automatic motorized mechanism. To

prevent damage to the core mechanism, please do not push, pull or

swivel the monitor manually.

4

VM9224

CONTROLS AND INDICATORS

1. Disc Slot

2. IR Remote Control Receiver

3. EJECT

Press to eject a disc.

Press and hold to reset core mechanism position.

4. SRC

Press to turn the unit on. Press and hold to turn the unit off.

When on, press once to select playing mode.

5. NAV

Press to display the navigation user interface.

6. TFT Display

7. Rotary Encoder

Rotate to adjust the volume. While in the audio menu, press and release to

enter and/or confirm audio settings.

Press to activate the MUTE function and silence the receiver. Press again to

resume sound.

Press and hold to activate the Local (LOC) setting. Press and hold again to

turn Local reception off.

8. USB/SD Interface Connector

Connect a USB device or insert an SD card for playback of music/video files.

9. A/V Input

Attach a compatible A/V device.

10. RESET

Press to reset system settings to factory default (except the password and

parental lock setting).

5

VM9224

EJECT

1

3

4

5

7

10

9

8

2

6

MUTE

OPEN

6

VM9224

REMOTE CONTROL

See Table 1 for remote control functions.

3

4

5

9

6

7

26

27

15

16

34

33

19

32

23

24

31

30

8

35

1

2

10

13

28

25

11

12

14

20

18

17

22

21

29

MUSIC PHOTO VIDEO

iPod

7

VM9224

8

VM9224

Table 1: Remote Control Functions

Button Function

Name # DVD VCD TUNER

CD/MP3/

USB/SD

iPod

MENU 1 Enters the

main menu

of the disc

Turns on/off

PBC when

playing

VCD

Selects

Photo mode

TITLE 2 Enters the

title menu of

the disc

Plays first

ten seconds

of each

chapter/title

Selects

Music mode

MUTE 3 Toggles on/

off audio

output

Toggles on/

off audio

output

Toggles on/

off audio

output

Toggles on/

off audio

output

Toggles on/

off audio

output

POWE

R/

4 Turns the

power on/

off

Turns the

power on/

off

Turns the

power on/

off

Turns the

power on/

off

Turns the

power on/off

AUDIO 5 Changes

the audio

language

for disc

playback

Selects

Music mode

REPT

A-B

6 Setup to

repeat play-

back from

time frame

A to time

frame B

Setup to

repeat play-

back from

time frame

A to time

frame B

REPT 7 Repeats

playback of

current

chapter

Repeats

playback of

current

chapter

Repeats

playback of

current

track

Repeats

playback of

current track

SRC 8 Selects

playing

mode

Selects

playing

mode

Selects

playing

mode

Selects

playing

mode

Selects

playing

mode

SUBTI-

TLE

9 Language

selection for

subtitle

Selects

Photo mode

9

VM9224

DISP/

CLEAR

10 Displays

playing

information

Delete entry

or move

backwards

to correct

error in

Direct

Access

mode

Displays

playing

information

Delete entry

or move

backwards

to correct

error in

Direct

Access

mode

Displays

playing

information

Delete entry

or move

backwards

to correct

error in

Direct

Access

mode

Display

playing

information

Delete entry

or move

backwards

to correct

error in

Direct

Access

mode

Displays

playing

information

Delete entry

or move

backwards

to correct

error in

Direct

Access

mode

PRE-

SET /\

11 Navigates

the preset

station list

PRE-

SET \/

12 Navigates

the preset

station list

ANGLE 13 Plays back

disc in dif-

ferent angle

for a scene

Plays back

Picture CD

with differ-

ent angle of

picture dis-

played

Selects

Video mode

>> 14 Fast for-

wards the

disc content

Fast for-

wards the

disc content

Fast for-

wards the

disc content

Accesses

iPod Menu

VOL - 15 Decreases

volume

Decreases

volume

Decreases

volume

Decreases

volume

Decreases

volume

VOL + 16 Increases

volume

Increases

volume

Increases

volume

Increases

volume

Increases

volume

|<< 17 Selects the

playback

Selects the

playback

Searches

an avail-

able radio

station by

decreasing

tuning fre-

quency

Selects the

playback

Pauses

playback/

starts play-

back

>/|| 18 Pauses

playback/

starts play-

back

Pauses

playback/

starts play-

back

Pauses

playback/

starts play-

back

Table 1: Remote Control Functions

Button Function

Name # DVD VCD TUNER

CD/MP3/

USB/SD

iPod

10

VM9224

>>| 19 Selects the

next chap-

ter for play-

back

Selects the

next chap-

ter for play-

back

Searches

an avail-

able radio

station by

increasing

tuning fre-

quency

Selects the

next track

for playback

Selects the

next track

for playback

/ 20 Stops play-

back

Stops play-

back

Stops play-

back

GOTO 21 Open direct

entry

search

screen

Open direct

entry

search

screen

<< 22 Slow play-

back/slow

rewind play-

back

Slow play-

back/slow

rewind play-

back

ZOOM 23 Zooms in/

out on an

image

Zooms in/

out on an

image

PIC 24 Displays

set-up

parameters

Displays

set-up

parameters

OPEN/

CLOSE

25 No function No function No function No function No function

26 No function No function No function No function No function

27 No function No function No function No function No function

WIDE 28 Selects dis-

play mode:

FULL or

NORMAL

Selects dis-

play mode:

FULL or

NORMAL

1, 2, 3,

4, 5, 6,

7, 8, 9,

0

(Numer

ic Key-

pad)

29 Directly

accesses

chapter

1-6 selects

preset for

current

band

Directly

accesses

track

Table 1: Remote Control Functions

Button Function

Name # DVD VCD TUNER

CD/MP3/

USB/SD

iPod

11

VM9224

||> /

BAND

30 Press

repeatedly

for slow

motion for-

ward/back-

ward

Press

repeatedly

for slow

motion for-

ward/back-

ward

Selects FM/

AM band

SETUP 31 Displays

Setup menu

Displays

Setup menu

Displays

Setup menu

Displays

Setup menu

Displays

Setup menu

EQ 32 Accesses

equalizer

menu

Accesses

equalizer

menu

Accesses

equalizer

menu

Accesses

equalizer

menu

Accesses

equalizer

menu

RDM 33 Plays all

chapters in

random

order

Plays all

tracks in

random

order

Plays all

tracks in

random

order

INT 34 Plays the

first ten sec-

onds of

each track

EJECT 35 Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc

Table 1: Remote Control Functions

Button Function

Name # DVD VCD TUNER

CD/MP3/

USB/SD

iPod

12

VM9224

Aspect Ratio

Press the WIDE button (28) on the remote control to adjust the aspect ratio as

follows:

Image/Display Settings

Video Output Modes

Table 2 shows the video output mode for each playing source.

*CVBS – Composite Video Baseband Signal

Picture Adjustment

To adjust monitor display settings, perform the floowing steps:

1. Press the PIC button (24) on the remote control repeatedly to move from

the “BRIGHT” setting to “CONTRAST”.

2. Turn the rotary encoder to adjust the setting level.

3. Press the PIC button (24) on the remote control 1-3 times to exit the

picture adjustment menu.

Table 2: Video Output Modes

Playing Source Video Output Modes

AM/FM TUNER RGB Mode

DVD RGB Mode

AUX IN CVBS Mode

FULL

The entire screen is extended

horizontally to the aspect ratio of 16

to 9. The extension ratio is the same

at any point.

NORMAL

The conventional display image has

a 4 to 3 ratio of horizontal to vertical,

leaving a blank area on the right and

left sides of the display.

STANDBY

Screen becomes black. Touch

screen to resume.

13

VM9224

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,

the front TFT monitor will display video when the Parking Brake is engaged.

(When the pink wire is grounded via the Parking Brake circuit, video will be

displayed.)

14

VM9224

OPERATING INSTRUCTIONS

Power On / Off

Press the /SRC button (4) on the unit (or the button (4) on the remote

control) to turn the unit on. The buttons on the front of the unit light up and the

current mode status appears in the LCD (7).

Press and hold the button to power off the unit.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The Beep tone can be

disabled through the Setup menu.

Mute/Line Mute

Press the rotary encoder button (7) on the front panel or the MUTE button (3)

on the remote to mute the volume from the unit. Press the rotary encoder

button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting

the volume or using any of the audio setup features cancels the mute function.

If the “MUTE” wire is connected, audio output mutes when a telephone call is

received by the car phone (using optional BTM10) or when verbal navigation is

performed (using optional NAV102).

Playing Source Selection

When the monitor is closed, press the SRC button on the front panel (4) or

remote control (8) to change between available audio playing sources in the

following order: RADIO, DISC, USB1, USB2, SD, BT, NAV, AUX and

CAMERA.

Source Menu

You can also use the touch screen to change the source through the SOURCE

MENU. To access the SOURCE MENU, touch the top left corner of the screen

or press the SRC button on the front panel (4) or remote control (8).

SOURCE MENU

RADIO

BT

DISC

NAV

USB1

AUX

USB2 SD

CAMERA

N

S

E

W

8GB

15

VM9224

Touch the RADIO, DISC, USB1, USB2, SD, BT, NAV, AUX or CAMERA button

to select the corresponding source.

NOTE: If an iPod is attached to a USB1 port, “IPOD” appears instead of

the text “USB1.”

External Devices

External peripheral devices, including a game console, camcorder, navigation

unit, iPod, Zune, etc. can be connected to this unit via RCA output using an

A/V Media Adapter Cable (not included).

Connect the external device to the A/V Media Adapter Cable and then plug the

cable into the A/V INPUT connector (9) on the front of the radio. Select “AUX”

or “AUX IN” (when monitor is closed) mode to access auxiliary devices. You

cannot directly control external devices connected to the A/V INPUT. For

information regarding the use of USB devices, see “Inserting a USB Device or

SD Card” on page 39.

Volume Adjustment

Volume Increase/Decrease

To increase or decrease the volume level, turn the rotary encoder (7) on the

front panel or press the VOL-/+ buttons (15, 16) on remote control. When the

volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment

limit has been reached. The TFT screen displays the volume level for 3

seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of

the volume setting prior to turning the unit off.

To program a specific turn-on volume level, turn the rotary encoder (7) to

adjust the volume to the desired turn-on volume. Push and hold the rotary

MUTE

3.5mm A/V Cable (not included)

V ideo

Left Audio

Right Audio

Ground

1

2

3

4

16

VM9224

encoder while the speaker icon and level indication is displayed on the screen.

The unit will beep to confirm your turn-on volume setting.

Audio Control Menu

The Audio Control feature allows you to easily adjust your audio system to

meet the acoustical characteristics of your vehicle, which vary depending on

the type of vehicle and its measurements. Proper setting of the Fader and

Balance boosts the effects of the cabin equalizer.

Touch the EQ button on the left side of the screen or press the EQ button (32)

on the remote control to display the audio menu.

• Use the touch screen +/- buttons to adjust the settings for an audio

feature.

• To adjust an audio feature using the remote control, perform the following

steps:

a. Press the (>>|)/(|<<) buttons (19, 17) to highlight the audio feature to

be adjusted.

b. Press the >/|| button (18) to select the highlighted option.

c. Press the |<<, >>|, >>, or << buttons (12, 15, 17, 20) on the remote

control to adjust the selected feature to the desired setting.

NOTE: The EQ mode will automatically change to “USER” when

individual audio functions are adjusted.

Table 3: Audio Adjustments

Audio Function Adjustable Range

EQ User

Acoustic

Urban

Rave

Latin

Dance

Hip Hop

Rock

BASS -14 to +14

MID -14 to +14

TREBLE -14 to +14

SUB -14 to 0

FAD Grid

BAL Grid

17

VM9224

The Audio menu will automatically exit after a few seconds of inactivity. To exit

quickly, touch the top left corner of the screen.

System Reset

To correct a system halt or other illegal operation, use the

tip of a pen to press the reset button (10) located on the

front bottom-right corner of the unit. After a system reset,

the unit restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD resumes play

once the reset is complete.

Steering Wheel Control (SWC)

The VM9224 is compatible with the PAC (Pacific Accessory Corporation)

steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled

“SWC Interface”) on the back of the head unit allows connectivity to the PAC

adapter. Please refer to the instructions included with the PAC adapter for

detailed installation information.

SWC Functions

The following controls are available for most vehicles:

1. Vol Down

2. Vol Up

3. Mute

4. Seek Down / Previous Track / ** Preset Down

5. Seek Up / Next Track / ** Preset Up

6. SRC (Source)

7. ** Select

8. ** Select

9. Band

** If additional steering wheel control buttons are available on the vehicle,

function 7 / 8 may be assigned the "Select" feature. This feature / function may

not be available on some vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is pressed momentarily,

Preset Up will be selected. If "Select" (function 7 or 8) is held down and

function 5 is pressed momentarily, Preset Down will be selected.

[RESET] Butto

n

La page charge ...

Jensen VM9224 Manuel utilisateur

Ce manuel convient également à

Jensen VM9224 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents