Aosom 370-064V80BK Mode d'emploi

Taper
Mode d'emploi

Ce manuel convient également à

BMW S1000 RR
Owner’s Manual
with Assembly Instructions
Styles and colo(u)rs may vary.
Made in China.
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions.
The Ride-on Car must be assembled by an adult who has read and understands the
instructions in this manual.
Keep the package away from children and dispose of properly before use.
Keep this manual for future reference.
Children Battery Powered Trike
IN220800265V04_US_CA
_370-064V80
On the purchase of your new Trike
This ride-on car will provide your child with many miles of riding of
enjoyment. To help assure you and your rider a safe ride we ask you to
please read this manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve
the safety and operation of your ride-on car and rider.
Battery
Charger
6V4Ah x 1
6V500mA
Suitable age:
Load Capacity:
Speed:
Size of car:
Power way:
Charge time:
18-36 Months
Under 20 kgs
3km/h
66 x 37 x 44 CM
Charging type
8 ~ 12 hours
About Your New Ride-On │ 1
VER: SMS-JT5188(smaller packing)-EN-20200711
BMW S1000RR Children Battery Powered Trike manufactured by
Zhejiang Jiajia Ride-On Co., Ltd. (Xincang Industrial Zone, Pinghu City,
Zhejiang Province, P.R.China). The BMW logo and the BMW word mark
are trademarks of BMW AG and are used under license.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
1
1
1
1
1
1
2
3
1
1
2
1
2
PART
NO.
REMARKS
PART NAME
Q’ty (pcs)
Vehicle body
Faceguard
Handle bar
M5x35 machine screw
Ø5 nut
Charger
Gear box
Rear wheel
Ø10 washer
Lock nut
Front wheel assembly
Spanner
Rear axle
Ø4x12 screw
Parts List │ 2
Placed on the front fork of the wheel assembly
Placed on the front fork of the wheel assembly
Placed on the rear axle
Placed on the rear axle
13
6
10
12
9
8
1
3
4
5
9
89
2
14
11
7
NOTE: Some parts shown are assembled on both sides of vehicle
Parts Diagram │ 3
Spanner
Before Assembly │ 4
• Before first time use, charge the battery for at least 4 to 6 hours.
• Assembly tools required:
WARNING!
Screwdriver
(not included)
● Non-rechargeable batteries are not to be recharged.
● Rechargeable batteries are to be removed from the toy before being charged.
● Rechargeable batteries are only to be charged under adult supervision.
● Different types of batteries or new and used batteries are not to be mixed.
● Batteries are to be inserted with the correct polarity.
● Exhausted batteries are to be removed from the toy.
● The supply terminals are not to be short-circuited.
BATTERY INFORMATION
ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before assembly.
5
6
1
2
43
7
8
Attach the Rear Wheels │ 5
5. Slide a Ø8 washer onto the rear axle.
6. Slide a rear wheel (gear side first) onto the rear alxe.
7. Slide a Ø8 washer onto the rear axle.
8. Tighten a lock nut to the end of the rear axle with a spanner.
HINT: An extra spanner has been provided to hold the Lock Nut on the
other side of the rear alxe while tightening the Lock Nut on the other side.
Remove all the parts from the rear axle. Turn the vehice body upside down.
1. Slide a Ø8 washer onto the rear axle.
2. Slide a driving wheel (gear side inward) onto the rear axle.
3. Plug the connector on the vehicle into the connector on the motor.
4. Slide rear axle through the hole on the gear box, (ensure the driving wheel
match up with the gear box), and out through the hole on the other side of the
vehicle body.
Vehicle
connector
Motor
connector
Driving wheel
Gear side
2
3
4
1
Attach the Handle Bar │ 6
Remove the M5x35 machine screw and Ø5 nut from the
end of the front fork. Turn the vehicle body upright.
1. Insert the front fork into the opening on the front of the
vehicle body from the bottom side, and out through the
hole on the top of the vehicle.
2. Place the handle bar over the the end of the fork.
End of front fork
Front fork
3. Align the holes on each side of handle
bar with the holes at the end of the
fork.
4. Fasten a nut on the opposite end of
the screw to secure the handle bar.
1
1
42
3
Attach the Faceguard │ 7
1. With a small screwdriver remove the screw on the battery cover on the
faceguard.
2. Remove the battery cover from the top of the battery compartment.
3. Insert two AAA batteries in their correct polarities.
4. Replace the battery cover over the battery compartment and fasten with the
screw you removed in step one.
If you your vehicle with the sound function, follow the steps 1-4
to add the batteries (not included). Refer to the battery information on
page 3.
1
2
2
2
3
Attach the Faceguard │ 8
1. Plug the light wire connector on the faceguard into the connector on the vehicle. Then
hide the connectors into the hole in the faceguard.
2. Insert the three tabs on the faceguard into the holes in the vehicle body. Push the
faceguard down till hear it “click” into place.
3. Insert and tighten a Ø4x12 screw on each side of the faceguard with a screwdriver.
1
2
3
Connect the Power Supply │ 9
1. Using a screwdriver to remove the screw on the seat back.
2. Remove the seat.
3. Plug the red connector into the terminal on battery as shown.
4. Replace the seat.
Safety │ 10
The following safety hazards may result in serious injury or death:
• Never leave child unattended. Direct adult supervision is required. Always keep child in view
when child is in vehicle.
• To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor
vehicles, on or near steep inclines or steps, swimming pools or other bodies of water, always
wear shoes, and never allow more than 1 rider.
• Never use in unsafe conditions such as snow, rain, loose dirt, mud, sand, or gravel,
otherwise may result in an unexpected accident such as tipping over, and could damage the
electrical system or battery
• Not to be used in traffic.
• This toy should be used with caution since skill is required to avoid falls or collisions causing
injury to the user or third parties.
• This toy is unsuitable for children under 18 months due to its maximum speed; Maximum
user weight is 20kg.
• This toy has no brake.
WARNING!
WARNING!
WARNING!
CHOKING HAZARD - Small parts. Not suitable for children under 18 months. The product
contains small parts, keep children away when assembling.
ADULT ASSEMBLY REQUIRED.
• Always remove protective material and poly bags and dispose before assembly.
• Protective equipment should be worn. Always wear shoes and sit in the seat when operating
the vehicle.
• Only drive on level ground. Never use on the lawn.
• Never leave a child unattended.
• Keep your hands, hair, and clothes away from moving parts.
• Do not mix old and new batteries .
• Do not mix alkaline,standard (carbon-zinc).or re-chargeable batteries.
• Only use the batterylies) speified by the manufacturer.
• Only use the charger(s) specified by the manufacturer.
• The battery is not replace able.
RISK OF FIRE. Do not bypass. Replace only with a 7A fuse.
2
1
1. Sounds buttons(if equipped): Press for sounds playing.
2. Foot pedal: Applies power (speed) to the vehicle.
Use Your Trike │ 11
Charging │ 12
1. Plug the charger port into the input socket. (the socket is at the back of the vehicle)
2. Plug the charger plug into a wall outlet. The battery will begin charging.
• Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery
for more than 10 hours to avoid overheating the charger.
• When the vehicle begins to run slowly, recharge the battery.
• After each use or once a month minimum recharge time as 8 to 12 hours, less than 20 hours at
most.
• Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the
battery or the charger with another brand. Using another battery or charger may cause a fire or
explosion.
• Do not use the battery or charger for any other product.
• ONLY an adult is allowed charge and recharge the battery!
• This product with Charging Protection: when charging, all functions will be cut off.
WARNING!
Battery Replacement & Fuse │ 13
The battery features a thermal fuse with a rest fuse that will automatically trip and cut all
power to the vehicle if the motor, electric system or battery is overloaded. The fuse will
reset and power will be restored after the unit is turned OFF for 20 seconds and then turned
ON again. If the thermal fuse trips repeatedly during normal use, the vehicle may need
repair. Contact your distributor please.
To avoid losing power, follow these guidelines:
● Do not overload the vehicle.
● Do not tow anything behind the vehicle.
● Do not drive up steep slopes.
● Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to
overheat.
● Do not drive in very hot weather, components may overheat.
● Do not allow water or other liquids to come in contact with the battery or other electric
components.
● Do not tamper with the electric system. Doing so may create a short, causing the fuse to
trip.
Battery Replacement and Disposal
The battery will eventually lose the ability to hold a charge. Depending on the amount of
use, and varying conditions, the battery should operate for one to three years. Follow these
steps to replace and dispose the battery:
1. Remove the car seat.
2. Disconnect the battery connectors.
3. Remove the battery bracket.
4. Remove the battery cover.
5. Carefully lift the battery.
● Depending on the condition of the battery (i.e.: leakage) you may want to wear
protective gloves before removal.
● Do not lift the battery by its connectors or cables.
6. Place the dead battery in a plastic bag.
Important! Recycle the dead battery responsibly. The battery contains lead acid
(electrolyte) and must be disposed of properly and legally. It is illegal in most areas to
incinerate lead acid batteries or dispose of them in landfills. Take it to a federal or
state-approved lead acid battery recycler, such as local automotive battery retailer.
Do not throw the battery away with your regular household waste!
7. Replace the battery and reconnect the connectors.
8. Replace the metal battery bracket.
9. Replace the seat.
Troubleshooting Guide │ 14
.
Problem Possible Cause Solution
Vehicle does not run
Vehicle does not run
very long
Vehicle runs sluggishly
Vehicle needs a push
to go forward
Loud grinding or clicking
noises coming from
motor or gear box
Battery low on power
Thermal fuse has tripped
Battery connector or wires
are loose
Battery is dead
Electrical system is damaged
Motor is damaged
Battery is under charged
Battery is old
Battery is old
Vehicle is overload
Vehicle is being used in harsh
conditions
Poor contact of wires or
connectors
“Dead Spot” on motor
Motor or gears are damaged
Battery low on power
Recharge battery.
Reset fuse, see <Fuse>
Check that the battery connectors are firmly plugged
into each other. If wires are loose around the motor
contact your distributor please.
Check that the battery connectors are firmly plugged
into each other. If wires are loose around the motor,
contact your distributor please.
A dead spot means the electric power is not being
delivered to the terminal connection and the vehicle
needs repair. Contact your distributor please.
Check that the battery connectors are firmly plugged
into each other when recharging
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Replace battery, contact your distributor please.
Reduce weight on vehicle. Maximum user weight is
20 kgs.
Avoid using vehicle in harsh conditions ,see <Safety>.
Recharge battery, contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Contact your distributor please.
Battery will not
recharge
Charger feels warm
when recharging
Battery connector or adapter
connector is loose
Charger not plugged in
Charger is not working
This is normal and not a
cause for concern
Check that the battery connectors are firmly plugged
into each other.
Check that the battery charger is plugged into a
working wall outlet.
Completely read through this manual and the troubleshooting guide table before calling. If you
still need help resolving the problem Contact your distributor please.
Maintaining │ 15
Our products are suitable for
ASTM F963; GB6675; EN71 and EN62115 standard.
It is parents' responsibility to check main parts of the toy before using, Must
regularly examine for potential hazard, such as the battery, charge,cable or
cord, plug, screws are fastening enclosure of other parts and that in the event
of such damage, the toy must not be used until that damage had been properly
removed.
• Make sure the plastic parts of the vehicle are not cracked or broken.
• Occasionally use a lightweight oil to lubricate moving parts such as wheels.
• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Keep the vehicle away from sources of heat, such as stoves and heaters.
Plastic parts may melt.
• Recharge the battery after each use. Only an adult can handle the battery.
Recharge the battery at least once a month when the vehicle Raider is not
being used.
• Do not wash the vehicle with a hose. Do not wash the vehicle with soap and
water. Do not drive the vehicle in rainy or snowy weather. Water will damage
the motor, electric system and battery.
• Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a
non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.
• Do not drive the vehicle in loose dirt, sand or fine gravel which could damage
the moving parts, motors or the electric system.
• When not using, all the electrical source should be turn off. Turn off the power
switch and disconnect the battery connection.
Le manuel du propriétaire
avec instructions de montage
BMW S1000 RR
Trike à piles pour enfants
Les styles et les couleurs peuvent varier.
Fabriqué en Chine.
Le manuel du propriétaire contient des informations importantes sur la
sécurité ainsi que des instructions de montage, d’utilisation et de
maintenance.
La voiture doit être assemblée par un adulte ayant lu et compris les
instructions de ce manuel.
Conservez l'emballage hors de portée des enfants et éliminez-le avant
de l'utiliser.
Conservez ce manuel pour référence future.
6V4Ah x 1
6V500mA
À propos de votre nouveau véhicule │ 1
VER: SMS-JT5188(smaller packing)-EN-190110
À l'achat de votre nouveau Trike
Cette voiture à conducteur unique offrira à votre enfant de nombreux
kilomètres de plaisir. Pour vous assurer, ainsi qu’à votre cavalier, une
conduite sûre, nous vous prions de lire attentivement ce manuel et de
le conserver pour référence future.
Suivez les recommandations de ce manuel, elles sont conçues pour
améliorer la sécurité et le fonctionnement de votre voiture et de votre
conducteur.
Tricycle à piles pour enfants BMW S1000RR fabriqué par Zhejiang
Jiajia Ride-On Co., Ltd. (Ajouter : Zone industrielle Xincang,
agglomération de Pinghu, province du Zhejiang, Chine). Le logo
BMW et le logo BMW sont des marques commerciales de BMW
AG et sont utilisés sous licence.
Batterie
Chargeur
Âge approprié : 18-36 mois
Capacité de charge : moins de 20 kg
Vitesse : 3 km / h
Taille de la voiture : 66 x 37 x 44 cm
Moyen de puissance : Type de charge
Temps de charge : 8 ~ 12 heures
1
2
3
4
5
6
7
8
9
10
11
12
13
1
1
1
1
1
1
1
2
3
1
1
2
1
Carrosserie
Protecteur de visage
Guidon
Vis mécanique M5x35
Écrou Ø5
Chargeur
Boîte de vitesses
Roue arrière
Rondelle Ø8
Contre-écrou
Ensemble roue avant
Clé
Essieu arrière
│ 2
Liste de pièces
N °Qté (pcs) REMARQUES
NOM DE LA
PARTIE
Monté sur la fourche avant de l'ensemble roue
Monté sur la fourche avant de l'ensemble roue
Monté sur l'essieu arrière
Monté sur l'essieu arrière
Schéma des pièces │ 3
deux
13
6
10
12
9
8
1
3
4
5
9
89
2
14
11
7
REMARQUE : Certaines pièces illustrées sont assemblées des
côtés du véhicule.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33

Aosom 370-064V80BK Mode d'emploi

Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues