Tektronix P6245 Le manuel du propriétaire

Instruction Manual

P6245

1.5 GHz 10X Active Probe

070-8995-03

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

WARRANTY

Tektronix warrants that the systems that it manufactures and sells, (excluding

customer-supplied equipment), will be free from defects in materials and workmanship for

a period of one (1) year. The warranty period shall begin on the date of installation or one

(1) month after the date of shipment, whichever is earlier. If any component of a system

supplied by Tektronix proves defective during the initial one-year period, Tektronix, at its

option, either will repair the defective component without charge for parts and labor, or

will provide a replacement in exchange for the defective component. If any component of

the system is a Tektronix product that is normally sold with a separate warranty, such

separate warranty will apply to the component whenever its terms are more favorable to

the Customer.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the respective warranty period and make suitable

arrangements for the performance of service. Tektronix will provide such service at

Customer’s site without charge during the warranty period, if the service is performed

within the normal on-site service area. Tektronix will provide on-site service outside the

normal on-site service area only upon prior agreement and subject to payment of all travel

expenses by Customer. When or where on-site service is not available, Customer shall be

responsible for packaging and shipping the defective component to the service center

designated by Tektronix, with shipping charges prepaid. Tektronix shall pay for the return

of the component to Customer if the shipment is to a location within the country in which

the Tektronix service center is located. Customer shall be responsible for paying all

shipping charges, duties, taxes, and any other charges for components returned to any other

locations.

This warranty shall not apply to any defect, failure, or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel other

than Tektronix representatives to install, repair, or service the system; b) to repair damage

resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a

system that has been modified or integrated with other products when the effect of such

modification or integration increases the time or difficulty of servicing the system.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE

LISTED SYSTEMS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR

IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE

DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY

PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.

TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

P6245 Instruction Manual i

Table of Contents

Getting Started

Product Description 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Standard Accessories 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Customer Support 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features and Accessories 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuration 1–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Probe Offset 1–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Functional Check 1–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating Basics

Operating Basics 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum Non-destructive Input Voltage 2–1. . . . . . . . . . . . . . . . .

Input Linear Dynamic Range 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . .

Ground Lead Length 2–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Helpful Hints 2–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Low-inductance Grounding 2–5. . . . . . . . . . . . . . . . . . . . . . . . . . . .

SureFoot Grounding 2–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Probe Tip Test Points 2–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Probe Tip Stabilization 2–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications

Table of Contents

ii P6245 Instruction Manual

List of Figures

Figure 1–1: Dynamic and Offset Limitations 1–8. . . . . . . . . . . . . .

Figure 1–2: Probe Functional Check Connections 1–9. . . . . . . . . .

Figure 2–1: Waveform Distortion from Ground Lead Length 2–2.

Figure 2–2: Ground Lead Equivalent Circuit 2–3. . . . . . . . . . . . . .

Figure 2–3: Low-inductance Grounding 2–5. . . . . . . . . . . . . . . . . .

Figure 2–4: Using a SureFoot Adapter for Grounding 2–6. . . . . . .

Figure 2–5: Using a Probe Tip as a Test Point 2–7. . . . . . . . . . . . .

Figure 2–6: Probe Tip Stabilizing Notch 2–8. . . . . . . . . . . . . . . . . .

Figure 3–1: Typical Bandwidth 3–3. . . . . . . . . . . . . . . . . . . . . . . . .

Figure 3–2: Typical Voltage Derating vs. Frequency 3–3. . . . . . . .

Figure 3–3: Typical Linearity Error vs VIN 3–4. . . . . . . . . . . . . . .

Figure 3–4: Typical Input Impedance vs. Frequency 3–4. . . . . . . .

Figure 3–5: Typical Phase vs. Frequency 3–5. . . . . . . . . . . . . . . . .

P6245 Instruction Manual iii

General Safety Summary

Review the following safety precautions to avoid injury and prevent

damage to this product or any products connected to it.

Only qualified personnel should perform service procedures.

Injury Precautions

Avoid Electric Overload

To avoid electric shock or fire hazard, do not apply a voltage to a

terminal that is outside the range specified for that terminal.

Do Not Operate Without Covers

To avoid electric shock or fire hazard, do not operate this product

with covers or panels removed.

Do Not Operate in Wet/Damp Conditions

To avoid electric shock, do not operate this product in wet or damp

conditions.

Do Not Operate in Explosive Atmosphere

To avoid injury or fire hazard, do not operate this product in an

explosive atmosphere.

General Safety Summary

iv P6245 Instruction Manual

Product Damage Precautions

Do Not Operate With Suspected Failures

If you suspect there is damage to this product, have it inspected by

qualified service personnel.

Do Not Immerse in Liquids

Clean the probe using only a damp cloth. Refer to cleaning

instructions.

Safety Terms and Symbols

Terms in This Manual

These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that

could result in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that

could result in damage to this product or other property.

P6245 Instruction Manual v

Manual Organization

User Information

This section contains the information necessary to install and use the

P6245.

HGetting Started

This section contains the product description, description of

accessories, probe setup configuration, and how to check the probe

for normal operation.

HOperating Basics

This section contains basic information and operating suggestions for

optimal probe performance

HSpecifications

Service Information

This section contains the information necessary to maintain and

service the P6245.

HTheory of Operation

HPerformance Verification

HAdjustments

HMaintenance

HTroubleshooting

Replaceable Parts List

Manual Organization

vi P6245 Instruction Manual

Getting Started

P6245 Instruction Manual 1–1

Product Description

The Tektronix P6245 is a 1.5 GHz (probe only), 10X active FET

probe with less than 1 pF input capacitance. The P6245’s low input

capacitance and high input resistance minimize circuit loading over a

wide bandwidth range. The P6245’s small profile and low-mass head

makes probing crowded circuits by hand fast and easy. The accessory

tips and adapters enable the P6245 to be used on a wide variety of

circuit architectures.

The P6245 is powered through a TEKPROBE interface between the

probe’s compensation box and the oscilloscope. The P6245 may be

used with non-TEKPROBE oscilloscopes and instruments by using

the optional Tektronix 1103 Probe Power Supply.

In order to fully appreciate the probe’s capabilities, please read the

Getting Started and Operating Basics sections of this manual.

Standard Accessories

The P6245 is shipped with the following standard accessories:

Hstandard probe tips

HSureFoot adapter probe tips

HSMT KlipChip microcircuit test leads

HY-lead adapter

Hright-angle adapter

Hsignal-ground adapters

Hthree- and six-inch ground leads

Hlow-inductance ground lead

Hmarker rings

HInstruction Manual

Product Description

1–2P6245 Instruction Manual

For service information, refer to the service section beginning at the

yellow page.

For part number information for standard and optional accessories,

refer to the Replaceable Parts section of this manual.

Customer Support

To help you get the best performance from your probe, Tektronix

offers the following customer support services:

Operational Support

If you need assistance using your probe, please call our Customer

Support Center at 1-800-TEK-WIDE (1-800-835-9433), extension

2400. If you are outside the United States or Canada, please contact

your nearest Tektronix Service Center.

Service Support

Should your probe need repair that is beyond that supported by this

manual, please contact your nearest Tektronix Service Center.

Sales Support

To order optional equipment and accessories, call the Tektronix

National Marketing Center at 1-800-426-2200. If you are outside the

United States or Canada, please contact your nearest Tektronix

Service Center.

P6245 Instruction Manual 1–3

Features and Accessories

The P6245 is provided with several features and accessories designed

to make probing and measurement a simpler task. Please take a

moment to familiarize yourself with these items and their uses.

Probe Tip

Socket

Ground

Socket

Stabilization

Notch

Probe Head Assembly. The probe head is

designed for ease of use and high performance.

Its small size makes it easy to handle in tight

areas.

The probe tip socket is sized to easily press onto

0.025 inch pins for direct access. The ground

socket provides a short ground path for high

fidelity ground connections.

The stabilization notch permits you to use

adjacent pins to reduce stresses on the probe

and pins. See pages 1–6 and 2–8 for more

information.

TEKPROBE Interface. The TEKPROBE

interface provides a communication path between

the probe and the oscilloscope. Contact pins

provide power, signal, offset, and probe

characteristic data transfer. See page 4–2 for

more information.

If your oscilloscope does not support the

TEKPROBE interface, you can use the optional

1103 probe power supply as an effective

interface. Contact your local Tektronix representa-

tive for more information.

Push-In Probe Tip

Push-in Probe Tip. Use the push-in probe tip

for general purpose probing by hand. The tip may

also be used as a temporary test point. See page

2–7 for more information.

The push-in probe tip may also be used with the

other socketed leads and adapters.

Features and Accessories

1–4P6245 Instruction Manual

Installing the Push-in Probe Tip. Attach the

push-in probe tip by seating the tip into the probe

tip socket and pushing the tip in until it is seated.

Either end of the tip may be used.

Do not force the tip. Also, be careful not to poke

yourself with the sharp probe-tip. To remove the

tip, gently grab the tip with small pliers and pull

the tip out.

SureFoot probe tip. The SureFoot tip is an

integral probe tip and miniature guide that

enables fault-free probing of fine-pitch SMD

packages. Attach the SureFoot adapters the

same way as the push-in probe tips. They can be

used with any of the socketed accessory leads.

The yellow, 0.050 inch SureFoot tip is compatible

with 50 mil JEDEC packages such as SOIC,

PLCC, CLCC, etc.

The blue, 0.025 inch SureFoot tip is compatible

with 0.65 mm JEDEC and EIAJ packages.

The red, 0.5 mm SureFoot tip is compatible with

EIAJ packages.

Right Angle

Adapter

Right-angle adapter. Use the right-angle

adapter for low-profile probing of 0.025 inch

diameter square pins.

The right-angle adapter allows the P6245 to lie

flat against a circuit board. This enables probing

in vertical circuits such as computer or commu-

nications backplanes, or in tight areas such as

between circuit cards.

The right-angle adapter can be used directly with

the probe head, or attached to the Y-lead adapter

or ground leads.

The right-angle adapter is attached the same way

as the push-in probe tip, and can be easily

removed by hand.

Features and Accessories

P6245 Instruction Manual 1–5

Y-lead

Adapter

“Y-lead” adapter. Use the Y-lead adapter to

extend the physical reach of the probe and

ground when necessary. The Y-lead adapter

accepts any of the probe tips or adapters, and

can be pushed directly onto 0.025 inch pins.

When selecting the grounding connection,

maintain as short a ground path as possible.

Refer to page 2–2 for more information.

To attach the Y-lead adapter, gently press the

lead pins into the probe head tip and ground

receptacles. Using the black lead for ground is

recommended.

3 and 6 inch ground leads. Use the three- and

six-inch ground leads for general probing. The

socketed end of the leads may be connected to

any of the probe tips and adapters, or fitted onto

0.025 inch pins.

To attach the ground leads, press and rotate the

lead pin connector into the ground socket on the

probe head. The lead may be removed by simply

pulling the pin out by hand.

When selecting the grounding connection,

maintain as short a ground path as possible.

Refer to page 2–2 for more information.

Low-inductance ground lead. Use the

low-inductance ground adapter to substantially

reduce ground lead inductance. Because the

ground lead simply touches the ground reference,

you can easily move the probe to different points

on the device under test.

To attach, press the ground lead into the probe

head gound socket.

When selecting the grounding connection,

maintain as short a ground path as possible.

Refer to page 2–2 for more information.

Features and Accessories

1–6P6245 Instruction Manual

Signal Ground

Adapter

FlexLead

Adapter

Signal–Ground Adapter. The signal-ground

adapter is ideal for use with signal/ground pairs

on 0.100 inch header pins (such as FlexLead

adapters).

Attach the signal-ground adapter by gently

pressing it into the ground socket on the probe

head.

Be sure to use the stabilization notch whenever

possible. See page 2–8 for further details.

KlipChip

Y-lead

Adapter

SMT KlipChip. Use the SMT KlipChip test

clips to access fragile, dense circuitry.

KlipChip test clips can be connected to the Y-lead

or three- or six-inch ground leads. Simply press

the lead socket into the KlipChip handle.

The KlipChip body freely turns, allowing better

probe orientation. To reduce stress and provide a

lower profile on components being tested, the

flexible sleeve of the KlipChip bends up to a

35 degree angle.

Color Marker

Bands Color Marker Bands. Attach matching pairs of

the color marker bands onto the cable at the head

and compensation box of each probe. The marker

bands enable quick verification of which probe is

connected to which instrument channel.

P6245 Instruction Manual 1–7

Configuration

The P6245 provides the oscilloscope with the probe model number,

serial number, and attenuation factor. When connected to a

TEKPROBE oscilloscope, display readouts are corrected for the

probe attenuation factor, the instrument input is set to 50 W, and the

coupling is set to DC.

CAUTION. Do not attempt to install the P6245 on a non-TEKPROBE

connector. Damage to the probe and connector may result. If your

oscilloscope does not support the TEKPROBE interface, use the

optional Tektronix 1103 Probe Power Supply.

If the P6245 is used with the Tektronix 1103 Probe Power Supply, be

sure to have a 50 W termination at the oscilloscope. Also, set the

oscilloscope channel coupling to DC.

The probe offset control is controlled by the oscilloscope. If the

oscilloscope used does not support the TEKPROBE interface, the

offset controls on the optional Tektronix 1103 Probe Power Supply

can be used.

Probe Offset

The probe offset is adjustable to permit operation within the probe’s

linear range. Using the offset to cancel DC signal components

enables optimal probe performance. See Figure 1–1 on page 1–8.

NOTE. See your oscilloscope manual for specific instructions on its

operation and offset control.

Configuration

1–8P6245 Instruction Manual

To set the probe offset, follow these steps:

1. Set the oscilloscope coupling to GND.

2. Use the vertical position control to set a zero reference level on

the oscilloscope display.

3. Set the oscilloscope coupling to DC and 5 V/div.

4. Attach the probe to the circuit.

5. Adjust the probe offset to bring the trace to the oscilloscope zero

reference.

6. Change the volts/division setting to the desired range, adjusting

the offset to keep the trace on the zero reference level.

NOTE. The P6245 has a ±10 V offset range. The linear operating

range is ±8 V. See Figure 1–1. Also, see page 2–1 for more

information.

If cursors are used on a TEKPROBE oscilloscope, the zero reference

will be at the probe offset voltage.

0 V

+15 V

–15 V

+8 V

–8 V

+10 V

–10 V

Nonoperating Range (+15 V Maximum Non-destructive Input Voltage )

+10 V

–10 V

Nonoperating Range (–15 V Maximum Non-destructive Input Voltage )

Maximum Offset RangeMaximum AC Signal Amplitude

Figure 1–1: Dynamic and Offset Limitations

La page charge ...

Tektronix P6245 Le manuel du propriétaire

Tektronix P6245 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents