ROSIERES RFZPD7886IN WIFI Manuel utilisateur

Catégorie
Fours
Taper
Manuel utilisateur

Ce manuel convient également à

PROPERTY OF
CL N° REV. DATE
SPECIFICATION
1/1
MODIFY DESCRIPTION
MODIFIED BY
BASE CODE
TREATMENT
MATERIAL
DATE SIGNATURE
DRAWN
CHECKED
FOR
WEIGHT SCALE
SIZE
NAME
(LOCAL LANGUAGE)
PART CODE
SHEET
REPLACE No ORIGIN CL No Class Specification
FR
RELEASE LEVEL
WITHOUT OUR WRITTEN CONSENT IS FORBIDDEN
ALL RIGHTS RESERVED, THE REPRODUCTION OF ANY PART
OF EU DIRECTIVE 2002/95/CE + AMENDMENTS
MATERIALS IN COMPLIANCE WITH REQUIREMENTS
A5
------------
01.12.2016
KULLANMA KILAVUZU HALO FULL T. FR-GB-AR
XXXXX
01.12.2016
-
-
USER MANUAL HALO FULL T. FR-GB-AR
ROSIERES OVEN
GENERAL TOLERANCE
ISO 2768 - m
-
-
SC 000-000
PRODUCTION RELEASED
------------
I
J
K
L
M
4 2 8 2 1 1 4 4
2
70 gr/m
PAPER TECHNICAL DATA SHEET / KAĞIT MALZEMESİ
55013
03.05.19 Fonksiyon isimleri ve logo revize edildi./Function names and logo have been revised. Y.GÜLTÜRK
USER INSTRUCTIONS
OVENS
EN
FR
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES
USINES DE ROSIÈRES - 30, rue Y. LACELLE - Rosières - 18400 - Lunery - France
02
18
Safety Indications
EN 02
Cleaning and maintenance should not be carried out by unsupervised
children.
- Clean the oven door;
WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
•WARNING: the accessible parts can become hot when the oven is in
use. Children must be kept at a safe distance.
Cook the vegetables in a container with a lid instead of an open tray.
WARNING: ensure that the appliance is switched off before replacing
the bulb, to avoid the possibility of electric shocks.
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
- Do not place tea towels
• In ovens with meat probe it is necessary, before making the cleaning
cycle, close the hole with the nut provided. Always close the hole with
the nut when the meat probe is not used.
Children under 8 must be kept at a safe distance from the appliance if
not continuously supervised.
• During cooking, moisture may condense inside the oven cavity or on
the glass of the door. This is a normal condition. To reduce this effect,
wait 10-15 minutes after turning on the power before putting food
inside the oven. In any case, the condensation disappears when the
oven reaches the cooking temperature.
WARNING: before initiating the automatic cleaning cycle:
- Remove all accessories and the sliding rack kit (where present);
Children must not play with the appliance. The appliance can be used
by those aged 8 or over and by those with limited physical, sensorial or
mental capacities, without experience or knowledge of the product,
only if supervised or provided with instruction as to the operation of the
appliance, in a safe way with awareness of the possible risks.
Do not use rough or abrasive materials or sharp metal scrapers to
clean the oven door glasses, as they can scratch the surface and cause
the glass to shatter.
- Remove large or coarse food residues from the inside of the oven using
a damp sponge. Do not use detergents;
Only use the meat probe recommended for this oven.
The oven must be switched off before removing the removable parts
and, after cleaning, reassemble them according the instructions.
EN 03
Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must be
having the earth contact connected and in operation. The earth
conductor is yellow-green in colour. This operation should be carried out
by a suitably qualified professional. In case of incompatibility between
the socket and the appliance plug, ask a qualified electrician to
substitute the socket with another suitable type. The plug and the
socket must be conformed to the current norms of the installation
country. Connection to the power source can also be made by placing an
omnipolar breaker between the appliance and the power source that
can bear the maximum connected load and that is in line with current
legislation. The yellow-green earth cable should not be interrupted by
the breaker. The socket or omnipolar breaker used for the connection
should be easily accessible when the appliance is installed.
• The disconnection may be achieved by having the plug accessible or
by incorporating a switch in the fixed wiring in accordance with the
wiring rules.
• If the power cable is damaged, it must be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department.
Do not use a steam cleaner for cleaning operations.
Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
The type of power cable must be H05V2V2-F.
Any excess of spilled material should be removed before cleaning.
During the pyrolytic cleaning process, surfaces can heat up more than
usual, children must therefore be kept at a safe distance.
• When you place the shelf inside, make sure that the stop is directed
upwards and in the back of the cavity.
WARNING: Do not line the oven walls with aluminum foil or single-use
protection available from stores. Aluminum foil or any other protection,
in direct contact with the hot enamel, risk melting and deteriorating the
enamel of the insides.
WARNING: Never remove the oven door seal.
No additional operation/setting is required in order to operate the
appliance at the rated frequencies.
The appliance must not be installed behind a decorative door in order
to avoid overheating.
The shelf must be inserted completely into the cavity
Summary
EN 04
General Instructions
5
1.1 Safety indications
1.2 Electrical safety
1.3 Recommendations
1.4 Installation
1.5 Waste management
1.6 Conformity declaration
2.1 Overview
2.2 Accessories
2.3 First use
Product Description
7
3.1 Display description
3.2 Cooking modes
Use of the Oven
9
4.1 General notes on cleaning
4.2 Pyrolysis
4.3 Maintenance
• Removal of the oven window
• Removal and cleaning of the glass
door
Oven Cleaning and Maintenance
14
5.1 F.A.Q.
Troubleshooting
17
1. General Instructions
We thank you for choosing one of our products. For the
best results with your oven, you should read this
manual carefully and retain it for future reference.
Before installing the oven, take note of the serial
number so that you can give it to customer service staff
if any repairs are required. Having removed the oven
from its packaging, check that it has not been damaged
during transportation. If you have doubts, do not use
the oven and refer to a qualified technician for advice.
Keep all of the packaging material (plastic bags,
polystyrene, nails) out of the reach of children. When
the oven is switched on for the first time, strong
smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven
heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to
dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where
the instructions contained in this document are not observed.
NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the
model you have purchased.
1.1 Safety Indications
- do not pull on the power cable to disconnect the plug from the socket;
The use of any electrical appliance implies the observance of some fundamental rules:
- in general the use of adaptors, multiple sockets and extension cables is not recommended;
Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for
example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot
be held responsible for any damage resulting from improper, incorrect or unreasonable usage.
- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.
- do not touch the appliance with wet or damp hands or feet;
1.2 Electrical Safety
CONNECTION
ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.
The power supply to which the oven is connected must conform with the laws in force in the country of
installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe
these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a
disconnector with multiple poles, depending on the laws in force in the country of installation. The
electrical supply should be protected with suitable fuses and the cables used must have a transverse
section that can ensure correct supply to the oven.
The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of
the power supply.
WARNING
- power voltage indicated on the gauge;
The oven is supplied with a power cable that should only be connected to an electrical supply with 220-
240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is
connected to the electrical supply, it is important to check:
- the setting of the disconnector.
Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the
power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other
problems caused by failure to connect the oven to the earth terminal or by an earth connection that has
defective continuity.
EN 05
1.3 Recommendations
After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium
foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the
enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong
smokey smells, we recommend not using the oven at very high temperature. It is better to extend the
cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,
we advise you only use dishes and baking moulds resistant to very high temperatures.
1.4 Installation
The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required
to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The
installation instructions for professionally qualified personnel must be followed. Incorrect installation
may cause harm or injury to people, animals or belongings. The manufacturer cannot be held
responsible for such harm or injury.
The oven can be located high in a column or under a worktop. Before fixing, you must ensure good
ventilation in the oven space to allow proper circulation of the fresh air required for cooling and
protecting the internal parts. Make the openings specified on last page according to the type of fitting.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available
so that the oven can be connected to this if it is removed from the space in which it is installed. The
power cable must only be substituted by technical service staff or by technicians with equivalent
qualifications.
1.5 Waste management and environmental protection
- the WEEE should not be treated as domestic waste;
This appliance is labelled in accordance with European Directive 2012/19/EU regarding
electric and electronic appliances (WEEE). The WEEE contain both polluting substances
(that can have a negative effect on the environment) and base elements (that can be
reused). It is important that the WEEE undergo specific treatments to correctly remove and
dispose of the pollutants and recover all the materials. Individuals can play an important
role in ensuring that the WEEE do not become an environmental problem; it is essential to
follow a few basic rules:
- the WEEE should be taken to dedicated collection areas managed by the town council or a registered
company.
In many countries, domestic collections may be available for large WEEEs. When you buy a new
appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as
long as the appliance is of an equivalent type and has the same functions as the purchased appliance.
SAVING AND RESPECTING THE ENVIRONMENT
Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently
as possible, because heat from the cavity disperses every time it is opened. For a significant energy
saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and
use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any
heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed
cooking" programme makes energy saving more simple, moving the cooking process to start at the
reduced tariff time slot.
1.6 Declaration of compliance
By placing the mark on this product, we are confirming compliance to all relevant European safety,
health and environmental requirements which are applicable in legislation for this product.
The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC
Directive 89/109.
EN 06
2. Product Description
2.1 Overview
2.2 Accessories (According to model)
Metal grill
1
Drip pan
2
Holds baking trays and plates.
Collects the residues that drip during the cooking
of foods on the grills.
EN 07
1. Control panel
2. Shelf positions
(lateral wire grid if included)
3. Turnspit
4. Metal grill
5. Teflon tray
6. Drip pan
7. Fan (behind the steel plate)
8. Meat probe
9. Oven door
Pastry tray
3
The pastry tray must be placed on the shelf. It is for
cooking small pastries like choux, biscuits,
meringues, etc...
Never place the pastry tray directly on the oven
bottom.
2
4
9
3
5
6
8
7
1
Led vision
4
Is an illumination system which replaces the
traditional « light bulb ». 14 LED (for non-pyrolitic
versions) or 10 High Power LED (for pyrolitic
versions) lights are integrated within the door.
These produce white high quality illumination
which enables to view the inside of the oven with
clarity without any shadows on all the shelves.
Advantages :
This system, besides providing excellent
illumination inside the oven, lasts longer than the
traditional light bulb its easier and to maintain and
most of all saves energy.
-Optimum view
-Long life illumination
-Very low energy consumption, -95% in
comparison with the traditional illumination High.
6
Meat-probe
Do not leave the meat probe inside the oven
when it's not used: it could damage.
Do not insert the meat probe in the frozen food.
Prepare the food and properly insert the meat
probe into the food. Do not preheat or start
cooking before properly inserting the meat probe.
Probe should be inserted into the food and
receptacle while the oven is still cool.
Measures the internal temperature of food during
cooking. Insert the meat-probe into the hole on
the top of the cavity.
EN 08
5
•Unscrew the hooks
•Fix the meat with the hooks
•Tighten the screws
•Put the spit into the meat
•Insert the spit into the motor hole
No pre-heating is required for rotisserie cooking.
Cooking with the door closed. The energy
consumption is 90-95% less than traditional
system. When the oven is in use, any unused
accessories should be removed from the oven.
•Demount the handle before to start cooking.
Turnspit
Our technology and experience have brought a
feature typical of professional kitchens into the
home. A Multijet lateral ventilation system emit
microflows of hot air directly onto the food, at low
speeds, enveloping it completely.
This enables uniform cooking, reduced loss of
food moisture and simultaneous cooking on
different levels.
7
Pro/Exp'r Technology
2.3 First Use
PRELIMINARY CLEANING
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
EN 09
3. Use of the Oven
3.1 Display description
Cooking
duration
Cooking
end Timer
Clock
set
Child
lock
WiFi
ON / OFF
EXTRA
The oven is switched on and off with this button.
If the clock is not set, the oven does not work: the display
flashes, showing "12:00" and the only functioning key is
Extra. From the Extra key, the following functions can be set:
If the oven is switched off, the display shows the clock. When
the oven is inactive, all the functions are available except the
cooking duration and end of cooking.
EN 10
FUNCTION HOW TO ACTIVATE
HOW TO
DEACTIVATE
WHAT IT DOES WHY IT IS NEEDED
COOKING
DURATION
the display shows the time
been inserted, otherwise
remaining.
NB: can only be set with an
active cooking programme.
Press EXTRA twice and set
the time using the “+” and
“-” keys, confirming by
pressing "SELECT".
The display shows “00:00”
if no cooking duration has
cooking time as required
the set time, press EXTRA
twice and regulate the
using the “<” and “>”
keys, before pressing
SELECT" once more.
•To modify cooking before
•To cancel the cooking
duration, reset the display
to “00:00”.
When a cooking programme
terminates , the oven
switches off while the display
shows "END" (the cooking
programme icon remains on)
until the On/Off button, the
only functioning key, is
pressed. When a c o o k i n g p
r o g r amme terminates, an
alarm will sound.
When the cooking time has
f i n i s h e d , t h e o v e n
automatically switches off
and the alarm sounds for a
few seconds.
NB: can only be set with an
active cooking programme.
Press EXTRA enough times
to illuminate the icon, set
the end of cooking time
using the “<” and “>” keys
and confirm by pressing
"SELECT".
Press EXTRA enough times
to illuminate the icon, set
the end of cooking time
using the “<” and “>” keys
and confirm by pressing
"SELECT".
The cooking duration is
automatically calculated.
END OF
COOKING
•If delayed cooking is set, the
oven switches off and the
display shows the current time
while the cooking programme,
cooking duration and end of
cooking icons are illuminated.
•This function is also used for
cooking that can be scheduled
in advance.
•If a cooking programme is set,
it will be lost if the "F" key is
pressed.
•If a cooking programme is set,
by pressing the “<” and “>” keys
you can see and modify the
temperature set: at the first t o
u c h , t h e o p e r a t i n g
temperature is shown while
another touch will allow you to
modify said temperature.
To modify the end of
cooking before the set
time, press EXTRA enough
times to illuminate the
icon, regulate the end of
cooking time as required
using the “<” and “>” keys
and confirm by pressing
"SELECT".
To cancel the end of
cooking time, reset the
display to “00:00”.
TIMER
i l l u mi n a t e t h e i c o n,
regulate the cooking time
by pressing "SELECT".
•To modify the timer, press
EXTRA enough times to
as required using the “<”
and “>” keys and confirm
•This function activates an
not switch the oven off).
alarm that sounds for a few
seconds when the set time
You can select a time
between 00:00 and 23:59.
expires (this function does
Press EXTRA enough times
to illuminate the icon and
use the “<” and “>” keys to
set the time, confirming by
pressing SELECT.
The di sp lay shows
“00:00” if no time has been
inserted or the time
remaining if this has
already been set.
The t imer funct ions
regardless of whether the
oven is switched on.
SETTING
THE CLOCK
•The alarm functions
regardless of whether the
oven is switched on.
•Switched on for the first
time, the display
illuminates and sh
ows
"12:00".
•To modify the time, press
EXTRA enough times to
illuminate the icon and use
the “<” and “>” keys to set
the time, confirming it by
pressing SELECT.
•It allows you to set the
time that appears on the
display.
•This function is useful
when there are children in
the house.
•Press the EXTRA key
enough times to illuminate
the icon and then either
the “<” or “>” key to
activate this function: the
display will show ON; to
confirm press SELECT.
•Press the EXTRA key
enough times to illuminate
the icon and then either
the “<” or “>” key to
deactivate this function:
the display will show OFF;
to confirm press SELECT.
•If the function is active
only the "Extra" button, to
deactivate the function,
and "On/Off" button can
be used.
CHILD
SAFETY
LOCK
W h e n a c o o k i n g
programme terminates,
the oven switches off while
the display shows "END"
(the cooking programme
icon remains on) until the
On/Off button, the only
functioning key, is pressed.
W h e n a c o o k i n g
programme terminates, an
alarm will sound.
EN 11
When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by
the user.
If Wi-Fi is not configured it is only possible to choose between off and reset.
- The icon blinks 3 seconds on and 1 second off: the oven is trying to connect to your Wi-Fi router.
Pressing "Extra" on the timer display allows you to select the Wi-
Fi menu. In the Wi-Fi menu if you press the "< >" buttons you can select:
- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking
functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You
can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can
only be switched on via the app.
- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to
reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5
minutes to complete the enrolment process. During this process the cooking functions, recipes and
temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".
You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it
can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and
then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset
procedure automatically.
- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled
before this is possible.
- Icon is permanently lit: the oven is connected to your Wi-Fi router.
- Icon blinks 1 second on an 1 second off: the oven is accessible to your Wi-Fi network and ready to be enrolled.
If the enrolment has not been successful, the Wi-Fi icon will switch off after 5 minutes.
Wi-Fi Enrolment:
- Off: Wi-Fi is off; the oven is not controllable via the app.
To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by
pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5
minutes to complete the enrolment process.
Wi-Fi icon
- icon not lit: Wi-Fi is off.
- The icon blinks 1 second on and 3 seconds off: the oven is in read only mode.
WiFi (depends on the oven model)
ROSIERES E-PICURIEN:
For detailed information on HOW TO CONNECT your E-picurien appliance
and HOW TO USE IT effectively, go to www.rosieresepicurien.com.
Grill
Oven box
Turnspit
Circular
heating element
Bottom heating element
Fan
Defost
Pyro
LANGUAGE SETTING The language can be set when
the oven is switched off by pressing the Extra and Select
buttons simultaneously and for 3". The current language is
shown on the display and can be changed by pressing the
“<” or “>” keys, confirming it by pressing SELECT. Available
languages are: Italian, English, French and German.
“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still
hot, the display shows the current time alternating with the message “HOT” at 3" intervals.
SELECT Any selection must be confirmed. If not
confirmed within 15 seconds, the selection is cancelled.
By changing menu, any unconfirmed selection is lost.
The available recipes are the following:
PRE-SETTED RECIPES When a recipe is selected the display shows “R” followed by the number of
the recipe and shows the correspondent way of cooking.
MEAT PROBE
RECOMMENDED TEMPERATURES
Meat
Rare
Medium rare
Medium
Well done
Salmon
Chicken
56
58
60
62
35
min 68
RECIPE
COOKING
METHOD
TEMPERATURE
COOKING
DURATION
R1- Lasagne
R2- Roast/Oven cooked chicken
R3- Crusted bream
R4- Baked potatoes
R5- Omelette
Static + fan
Static
150°
180°
16
45’
40
25’
Static + fan
Static + fan
Static + fan
180°
180°
40
45’
R6- Apple pie
Static + fan
180°
45’
NB: It is not possible to change neither the temperature nor the cooking duration.
MEAT PROBE (depends on the oven model) If the meat probe is identified, the display shows
"PROBE". When a cooking programme is selected, the display shows the default temperature but is
never higher than 200°C: the selectable temperature is also limited to 200°C.
If the user changes the cooking programme, the meat probe temperature setting is reset. Repeat the
setting sequence to select a new target temperature. The meat probe cannot be used with pre-set
cooking or with the separating plate (if present) inside the oven: in this case the display shows“Ϙ NO”
and will not execute any command until the meat probe is removed. Defrost, grill, any program with
turnspit, pyrolysis and any programmed cooking are not allowed with the meat probe (they are not
shown on the menu).
When the temperature is confirmed, by pressing "Select", the display shows “Ϙ 40°”: it is now possible
to select the meat probe target temperature, between 30°C and 90°C at 1°C intervals. When the meat
probe temperature is confirmed, press the "Select" key and the display shows “Ϙ” followed by the
actual temperature taken by the meat probe (1 degree intervals). As soon as the meat probe reaches
the set temperature, the cooking programme terminates. If a cooking programme is set with the meat
probe, by pressing the “-” and “+” keys you can see and modify the temperature of the meat probe: at
the first touch of one of the two keys, the display shows the meat probe target temperature, while at the
next touch you can change the selected temperature of the probe.
EN 12
EN 13
T °C
default
180
220
210
200
210
ECO
40
L3
T °C
range
40 ÷ 40
50 ÷ 240
50 ÷ 280
50 ÷ 230
150 ÷ 220
50 ÷ 240
ECO÷SUPER
L1 ÷ L5
Function
Dial
Function (Depends on the oven model)
LAMP: Turns on the oven light.
PYROLYSIS
GRILL: use the grill with the door closed.
The top heating element is used alone and you can adjust the temperature.
Five minutes preheating is required to get the elements red-hot. Success is
guaranteed for grills, kebabs and gratin dishes. White meats should be put at a
distance from the grill; the cooking time is longer, but the meat will be tastier.
You can put red meats and fish fillets on the shelf with the drip tray
underneath. The oven has two grill positions:
Grill: 2140 W Barbecue: 3340 W
The top heating element is used with the fan circulating the air inside the oven.
Preheating is necessary for red meats but not for white meats. Ideal for
cooking thick food items, whole pieces such as roast pork, poultry, etc. Place
the food to be grilled directly on the shelf centrally, at the middle level. Slide
the drip tray under the shelf to collect the juices. Make sure that the food is not
too close to the grill. Turn the food over halfway through cooking.
GRILL + FAN : use the turbo-grill with the door closed.
MULTI-LEVEL We recommend you use this method for poultry, pastries, fish
and vegetables. Heat penetrates into the food better and both the cooking and
preheating times are reduced. You can cook different foods at the same time
with or without the same preparation in one or more positions. This cooking
method gives even heat distribution and the smells are not mixed.
Allow about ten minutes extra when cooking foods at the same time.
CONVECTION: Both top and bottom heating elements are used. Preheat the
oven for about ten minutes. This method is ideal for all traditional roasting and
baking. For seizing red meats, roast beef, leg of lamb, game, bread, foil
wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf in
mid position.
DEFROST: When the dial is set to this position. The fan circulates air at room
temperature around the frozen food so that it defrosts in a few minutes
without the protein content of the food being changed or altered.
*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.
3.2 Cooking Modes
It prevents food from drying and encourages rising in cakes, bread dough and
other bottom-cooked food.
BOTTOM HEATING + FAN: The bottom heating element is used with the fan
circulating the air inside the oven. This method is ideal for juicy fruit flans, tarts,
quiches and pâté.
Place the shelf in the bottom position.
GRILL + TURNSPIT: use the turnspit with the door closed.
The top heating element is used with the turnspit rotating the food to be
cooked. The heating temperature can be adjusted as required. The turnspit
is best used for medium-sized items.
Ideal for rediscovering the taste of traditional roast. No preheating is
required for turnspit cooking.
*
L5
L1 ÷ L5
GRILL+FAN+TURNSPIT: It is indicated for cooking the meat, particularly
voluminous, on the spit and it allows you to cook the food faster.
220
150 ÷ 220
*
EN 14
4. Oven cleaning and maintenance
4.1 General notes on cleaning
The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before
carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for
cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based
detergents (ammonia).
If dirty, the seal can be cleaned with a slightly damp sponge.
If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan
in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.
It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To
remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse
with water.
ACCESSORIES
Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive
detergents.
After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in
hot water, using a sponge and washing-up liquid.
OVEN WINDOW SEAL
GLASS PARTS
DRIP PAN
4.2 Pyrolysis
NOTE : If a hob has been fitted above the oven, never use the gas burners or the electric hot-plates while
the Pyrolyser is working, this will prevent the hob from overheating.
The oven is equipped with a pyrolyser cleaning system, which destroys food residues at high
temperature. The operation is carried out automatically by means of the programmer. The resulting
fumes are rendered “clean” by passing over a Pyrolyser wich starts as soon as cooking begins. As very
high temperatures are required by the Pyrolyser, the oven door is fitted with a safety lock. The pyrolyser
can be stopped at any time. The door cannot be opened until the safety lock is displayed.
TWO PYROLYTIC CYCLE are pre-set:
SUPER PYROCLEAN : Cleans a heavily stained oven. Operates for a period of 120 minutes.
Never use commercially available cleaning products on a Pyrolytic oven!
Tip : Carrying out Pyrolytic cleaning immediately after cooking allows you to take advantage of residual
heat, thus saving energy.
Before executing a pyrolytic cycle:
ECO PYROCLEAN : Cleans a moderately stained oven. Operates for a period of 90 minutes.
•Remove all the accessories from the oven because they are not able to tolerate the high
temperatures used during the pyrolytic cleaning cycle ; in particular removing grids, side racks and
the telescopic guides (refer to the chapter REMOVING GRIDS AND SIDE RACKS) . In ovens with meat
probe it is necessary, before making the cleaning cycle , close the hole with the nut provided.
•Remove any large spillages or stains as it would take too long to destroy them. Also excessively
large amounts of grease could ignite when subject to the very high temperatures of the Pyrolytic
cycle.
•Close the oven door.
•Excess spillage must be removed before cleaning.
Remove large or coarse food residues from the inside of the oven using a damp sponge. Do not use
detergents.
Remove all accessories and the sliding rack kit (where present).
Clean the oven door.
Do not place tea towels.
It is not possible to modify a pyrolysis duration but ending time can be modified.
Using the Pyrolitic cycle:
If a pyrolysis cycle is chosen the display shows “ECO”, that lasts 90 minutes, blinking; by the it "<" and ">"
is possible to change in “SUPER” that lasts 120 minutes.
If a pyrolysis is already started it is no more possible to change from ECO” to “SUPER” and vice versa.
During pyrolysis the buzzer does not sound.
Pyrolysis is not available if separator or side grids or the meat probe are detected, and it is not
programmable via WiFi.
4.3 Maintenance
REMOVAL OF THE OVEN WINDOW
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them
downwards.
3. Replace the window by carrying out the procedure in reverse.
1. Open the front window.
EN 15
LOW-E
1
2
3
1.
2.
3.
4.
5.
6.
7.
1. Open the oven door.
2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove
the second and third glass (if present)).
7. At the end of cleaning or substitution, reassemble the parts in reverse order.
REMOVAL AND CLEANING OF THE GLASS DOOR
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.
EN 16
5. Troubleshooting
5.1 FAQ
PROBLEM POSSIBLE CAUSE SOLUTION
The oven does not heat up
The clock is not set Set the clock
The child lock is on
A cooking function and
temperature has not been set
Deactivate the child lock
Ensure that the necessary
settings are correct
The oven does not heat up
The oven does not heat up
EN 17
Steam and condensation on
the user interface panel
Clean with a microfiber
cloth the user interface
panel to remove the
condensation layer
No reaction of the touch
user interface
CHANGING THE BULB
1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.
FR 18
Conseils De Sécurité
Pendant la cuisson de l’humidité peut se créer dans la cavité ou sur la
surface de la porte. Le cas crit est normal. Si on veut reduire cet effet, il
faut laisser chauffer le four 10-15 minutes avant d’introduire les
aliments. L’humidité va dispartre grâce à la juste temrature de cuisson.
Une fois que la cuisson est terminée, nous vous conseillons de ne pas
laisser les aliments à l’intérior de la cavité pour plus de 15/20 minutes
• Nous vous conseillons de faire la cuisson des légumes dans un
récipient avec couvercle pas sur un plateau.
AVERTISSEMENT: L'appareil et les parties accessibles deviennent
chauds pendant l'utilisation. Des précautions doivent être prises pour
éviter de toucher les éléments chauffants.
ATTENTION : les parties accessibles peuvent devenir très chaudes
quand le four est en marche. Les enfants doivent être tenus à une
distance de sécurité.
Utiliser seulement la sonde de température recommane pour ce four.
Les enfants ne doivent jouer avec l'appareil.
AVERTISSEMENT: Les parties accessibles peuvent devenir chaudes
pendant l'utilisation. Les jeunes enfants doivent être tenus à l'écart.
Le four doit être éteint avant d'enlever la protection et après le
nettoyage, la protection doit être replacée en respectant les instructions.
Brancher le câble d’alimentation sur une prise de courant qui supporte
le voltage ; le courant et la charge sont indiqués sur l’étiquette ; vérifier
la présence d’une mise à la terre. La prise d’alimentation doit supporter
la charge indiquée sur l’étiquette et être dotée d’une mise à la terre en
Le nettoyage et l'entretien par l'utilisateur ne doit pas être fait par des
enfants sans surveillance.
Ne pas utiliser de nettoyants abrasifs ou de racloirs métalliques
tranchants pour nettoyer la vitre de la porte du four car ils peuvent rayer
la surface, entrainant des risques d'explosion.
Ne pas utiliser de nettoyants vapeur pour le nettoyage.
• En cours d'utilisation l'appareil devient chaud. Des précautions doivent
être prises pour éviter de toucher les éléments chauds à l'inrieur du four.
État de fonctionnement. Le conducteur de mise à la terre est jaune et
Cet appareil n'est pas destiné à être utilisé par des personnes (y
compris les enfants) dont les capacités physiques, sensorielles ou
mentales sont réduites, ou ayant un manque d'expérience et de
connaissances, à moins qu'elles n'aient été formées à l'utilisation de
l'appareil, par une personne responsable de leur sécurité.
FR 19
Le non-respect des consignes ci-dessus peut compromettre la sécurité
de l’appareil et annuler la garantie.
Aucun réglage/opération supplémentaire n’est requis pour faire
fonctionner l’appareil aux fréquences nominales.
AVERTISSEMENT : Ne tapissez pas les parois du four avec du papier
aluminium ou un autre matériau de protection jetable en vente dans le
commerce. Tout papier aluminium ou autre matériau de protection qui
entrerait au contact direct de l'émail chaud risquerait de fondre et de
détériorer l'émail intérieur du four.
Vert. Cette opération doit être exécutée par du personnel qualifié. En
l’appareil, demander à un électricien professionnel de remplacer la prise
d’alimentation par un dispositif compatible. La fiche du câble
d’alimentation et la prise d’alimentation doivent être conformes aux
normes en vigueur dans le pays d’installation. Il est possible de brancher
l’appareil à la prise d’alimentation en installant un disjoncteur
multipolaire qui supporte la charge électrique maximale, conformément
aux lois en vigueur, entre l’appareil et la prise d’alimentation. Le
conducteur jaune et vert de mise à la terre ne doit pas être bloqpar le
disjoncteur. La prise d’alimentation ou le disjoncteur multipolaire utilisé
pour le branchement doit rester à tout moment accessible lors de
l’installation de l’appareil.
cas d’incompatibilité entre la prise d’alimentation et la fiche du câble de
Si le câble d’alimentation est endommagé, il doit être remplacé par un
câble ou un faisceau de câbles spécial disponible auprès du fabriquant
ou en contactant le service après-vente.
Le câble d’alimentation requis est le H05V2V2-F.
Ne pas installer l’appareil derrière une porte décorative, pour éviter la
surchauffe.
Tout produit déversé en quantité doit être éliminé avant le nettoyage.
• Le débranchement doit se faire en accédant à la prise d’alimentation
ou en prévoyant un interrupteur sur le circuit électrique fixe, conforme
aux normes électriques.
En introduisant le plateau dans le four, s’assurer que le stop est dirigé
vers le haut et au fond de la cavité.
Le plateau doit complètement être inséré dans la cavité
AVERTISSEMENT : Ne retirez jamais le joint de la porte du four.
Pendant le nettoyage à pyrolyse, les surfaces peuvent devenir beaucoup
plus chaudes que d’habitude, les enfants doivent donc être tenus à une
distance de sécuri.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

ROSIERES RFZPD7886IN WIFI Manuel utilisateur

Catégorie
Fours
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues