Winmate R19IH3S-SPM1 Guide de démarrage rapide

Please read these instructions carefully before using this product, and save this manual for future use.

Full IP65

Flat Stainless P-CAP

Panel PC

Intel® Core™ i5-5200U Broadwell 2.2 GHz

(Turbo to 2.7 GHz)

Quick Start Guide

V1.0

For more information on this and other

Winmate products, please visit our

website at: www.winmate.com

Model No.:

R15IH3S-SPC3

R17IH3S-SPA1

R19IH3S-SPM1

W22IH3S-SPA3

Document Part Number: 9152111I101S

ii

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

class "B" digital device, pursuant to part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at him own expense.

European Union

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the

Council directions.

iii

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in

any form or by any means, electronic or mechanical, for any purpose, without the

prior written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their

respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order

to improve design and/or performance. We assume no responsibility or liability

for the use of the described product(s) conveys no license or title under any

patent, copyright, or masks work rights to these products, and make no

representations or warranties that these products are free from patent, copyright,

or mask work right infringement, unless otherwise specified. Applications that are

described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified

use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be free from

material and workmanship defects for a period of one year from the invoice date.

If the customer discovers a defect, we will, at his/her option, repair or replace the

defective product at no charge to the customer, provide it is returned during the

warranty period of one year, with transportation charges prepaid. The returned

product must be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by over 30 days,

the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth

digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

iv

Customer Service

We provide a service guide for any problem by the following steps: First, visit the

website of our distributor to find the update information about the product.

Second, contact with your distributor, sales representative, or our customer

service center for technical support if you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business

day. We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products.

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronics

personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque

vous travaillez sur celui-ci. Ne pas brancher de connections

lorsque l’alimentation est présente. Des composantes

électroniques sensibles peuvent être endommagées par des sauts

d’alimentation. Seulement du personnel expérimenté devrait ouvrir

ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge

statique avant de toucher la carte CPU. Les équipements

électroniques moderns sont très sensibles aux décharges

d’électricité statique. Toujours utiliser un bracelet de mise à la

terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou

dans un sac anti-statique lorsqu’elles ne sont pas dans le chassis.

Contents

v

INTRODUCTION 1

Features 1

Package Content 2

Product Overview 3

Dimensions 15" 3

Dimensions 17” 3

Dimensions 19” 4

Dimensions 21.5” 4

Physical Buttons and LED Indicators 5

Connectors 6

GETTING STARTED 7

Turning On Your Device 7

How to Enable Watchdog 8

Turning Off Your Device 9

INSTALLATION 10

Wiring Requirements 10

Connector Pin Assignments 11

Power Cable 11

Serial Cable 12

Ethernet Cable 13

USB 2.0 Cable 14

Mounting 15

VESA Mounting 15

Yoke Mounting 16

SPECIFICATIONS 17

APPENDIX 19

Appendix A: Cleaning the Monitor 19

Appendix B: Winmate Software Development Kit 20

Winmate Download Center 20

Winmate File Share 20

1

INTRODUCTION

Congratulations on purchasing Winmate® IP65 Flat Stainless P-CAP Series

Panel PC. Winmate® IP65 Flat Stainless P-CAP Series Panel PC is rugged,

industrial-grade panel PC series built to withstand challenging environments,

undergoing rigorous testing to ensure safety and top performance. All of the

models in the series are sealed to IP65 standard. Stainless housing features anti-

corrosion properties making it suitable for food, chemical and pharmaceutical

industries. P-CAP multi-touch screen supports glove mode and provides even

more convenience for the operator.

Winmate® IP65 Flat Stainless P-CAP Panel PC goes beyond that of the

standard industrial panel computers with elegant, edge-to-edge design, rugged

construction, powerful performance, and flexible mounting options.

Features

Winmate® IP65 Flat Stainless P-CAP Panel PC features:

 Intel® Core™ i5-5200U Broadwell 2.2 GHz (Turbo to 2.7 GHz)

 Stainless housing, built to withstand the most demanding industries

 Sealed to IP65 for protection against water and dust

 A true flat, easy-to-clean front surface with edge-to-edge design

 Flat multi-touch panel pc with superior readability and P-CAP technology

 Various mounting solutions, Yoke mount and VESA mount

 Plenty of I/O s including USB 2.0, RS-232 serial port and RJ45-

10/100/1000 LAN ports

 Waterproof ports with adapter cables for external connectivity

 Rain/ Glove Mode

2

Package Content

Carefully remove the box and unpack your device. Please check if all the items

listed below are inside your package. If any of these items are missing or

damaged contact us immediately.

Standard factory shipment list:

Panel PC

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

9152111I101S

IH32: 9171111I102F

AC Adapter

Power Cable*

Serial Cable

80W 90PO12080003

Varies by country

94G0103090Q0

Ethernet Cable

USB Cable

VESA Screws

94I0080080KF

9480108080Q0

913511101101

3

Product Overview

This section contains mechanical drawing of the Panel PC. Notice that this is a

simplified drawing and some components are not marked in detail.

Dimensions 15"

Unit: mm

Dimensions 17”

Unit: mm

4

Dimensions 19”

Unit: mm

Dimensions 21.5”

Unit: mm

5

Physical Buttons and LED Indicators

Physical buttons and LED indicators located on the rear side of the Panel PC.

Physical Buttons

Icon

Button

Description

Reset

Press to reset the system

Power On/ Off

Press to power on or power off the device

LED Indicators

LED Type

Status

Description

On

Power is on

Off

Power is off

Blinking

Storage activity

(Data is being read or written)

Off

System is idle

6

Connectors

IP65 Flat Stainless P-CAP Panel PC has IP65 type connectors with protection

cap.

7

GETTING STARTED

Turning On Your Device

Follow the following steps to turn on your device:

1. Connect the AC adapter to the DC-in jack connector located on the

back side of the Panel PC.

2. Connect the power cord to AC adapter.

3. Plug the power cord to the AC outlet and the device will turn on

automatically.

AC Adapter specifications vary by panel size.

Size

15”

17”

19”

21.5”

AC Adapter

12V/ 80W

Power Consumption*

52W (typ.)

56W (typ.)

66W (typ.)

*With maximum backlight and high CPU load.

8

How to Enable Watchdog

To enable Watchdog, you need to download Winmate Watchdog utility. Find

more information on Watchdog in “Watchdog Guide” that you can download from

Winmate Download Center or File Share. Refer to the User Manual for more

details.

To enable watchdog in Watchdog AP follow the instructions below:

1. On the right bottom side of the desktop screen, click triangle button to

show hidden icons.

2. Click icon to open Watchdog utility.

3. In Watchdog utility window set countdown time and periodically feed time,

or disable watchdog.

Example:

Every 10 min watchdog will monitor

the system, in case any error occurs

the system will restart automatically

when the countdown time reaches 0.

Every 9 min watchdog timer will be

reset to 10 min.

9

Settings

Description

Watchdog Countdown

Time

The system automaticity restarts when this

countdown time reaches zero.

Default: 10 min

Periodically Feed Time

To set a cycle time to automatically reset

watchdog timer. Default: 9 min

Enable / Disable

Enable or disable watchdog. Default: Enable

Turning Off Your Device

To shut down your device, do the following:

Tap Start ( ) > Shut down.

Wait for your Panel PC to completely turn off before disconnecting the power

cord (if necessary).

10

INSTALLATION

Wiring Requirements

The following common safety precautions should be observed before installing

any electronic device:

 Strive to use separate, non-intersecting paths to route power and

networking wires. If power wiring and device wiring paths must cross

make sure the wires are perpendicular at the intersection point.

 Keep the wires separated according to interface. The rule of thumb is that

wiring that shares similar electrical characteristics may be bundled

together.

 Do not bundle input wiring with output wiring. Keep them separate.

 When necessary, it is strongly advised that you label wiring to all devices

in the system.

CAUTION

 Do not run signal or communication wiring and power wiring in the same

conduit. To avoid interference, wires with different signal characteristics

(i.e., different interfaces) should be routed separately.

 Be sure to disconnect the power cord before installing and/or wiring your

device.

 Verify the maximum possible current for each wire gauge, especially for

the power cords. Observe all electrical codes dictating the maximum

current allowable for each wire gauge.

 If the current goes above the maximum ratings, the wiring could overheat,

causing serious damage to your equipment.

 Be careful when handling the unit. When the unit is plugged in, the

internal components generate a lot of heat which may leave the outer

casing too hot to touch.

11

Connector Pin Assignments

This Panel PC is equipped with four connectors which are IP65 level and fool-

proofing design. Use only the cables that are included in the package. The pin

assignments of the cables are as follows.

Power Cable

The Flat Stainless P-CAP Panel PC has IP65 connector. Use power cable to

connect Panel PC to the source of power.

Flat Stainless P-CAP Panel PC support 12V DC power input.

12

Serial Cable

The Flat Stainless P-CAP Panel PC has IP65 serial port connector. Use serial

cable to connect serial interfaces.

13

Ethernet Cable

The Flat Stainless P-CAP Panel PC has IP65 Ethernet connector. Use Ethernet

cable to connect the Panel PC to the Internet.

14

USB 2.0 Cable

Flat Stainless P-CAP Panel PC has one Full IP65 USB2.0 connector. Use

USB2.0 cable to connect external devices such as mouse or keyboard to the

Panel PC.

La page charge ...

Winmate R19IH3S-SPM1 Guide de démarrage rapide

Ce manuel convient également à

Winmate R19IH3S-SPM1 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents