Winmate R15IB3S-GSC3 Guide de démarrage rapide

Taper
Guide de démarrage rapide
Please read these instructions carefully before using this product, and save this manual for future use.
G-WIN Slim IP65
P-CAP Panel PC
Intel® Celeron® Bay Trail-M N2930 1.83GHz
W10IB3S-GSH1
R10IB3S-GST2
R12IB3S-GSM2(HB)
R15IB3S-GSC3(HB)
Quick Start Guide
V1.1
For more information on this
and other Winmate products,
please visit our website at:
www.winmate.com
Document Part Number: 91521110100P
- 2 -
CONTENTS
1 INTRODUCTION - 6 -
1.1 Features - 6 -
1.2 Package Contents - 7 -
1.3 Description of Parts - 8 -
1.4 Physical Buttons and LED Indicators - 12 -
2 GETTING STARTED - 13 -
2.1 Turning on Your Device - 13 -
2.2 How to Enable Watchdog - 14 -
2.3 Turning off Your Device - 16 -
3 INSTALLATION - 17 -
3.1 Wiring Requirements - 17 -
3.2 Connecting to Other Devices - 18 -
3.3 Connector Description - 19 -
3.3.1 Power Input Connector - 19 -
3.3.2 Serial Interface Connector - 20 -
3.3.3 Giga LAN + USB 2.0 Connector - 21 -
3.4 Mounting - 22 -
3.4.1 VESA Mounting - 22 -
3.4.2 Panel Mounting - 23 -
4 SPECIFICATIONS - 24 -
APPENDIX - 26 -
Appendix A: Cleaning the Monitor - 26 -
Appendix B: Winmate Software Development Kit - 27 -
- 3 -
FCC Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
European Union
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
o IEC61000-4-2: 2009
o IEC61000-4-3: 2006+A1: 2007+A2: 2010
o IEC61000-4-4: 2012
o IEC61000-4-5: 2014
o IEC61000-4-6: 2014
o IEC61000-4-8: 2010
o IEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/
A2:2013
This equipment is in conformity with the requirement of the following EU
legislations and harmonized standards. Product also complies with the
Council directions.
- 4 -
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in
any form or by any means, electronic or mechanical, for any purpose, without the
prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order
to improve design and/or performance. We assume no responsibility or liability for
the use of the described product(s) conveys no license or title under any patent,
copyright, or masks work rights to these products, and make no representations
or warranties that these products are free from patent, copyright, or mask work
right infringement, unless otherwise specified. Applications that are described in
this manual are for illustration purposes only. We make no representation or
guarantee that such application will be suitable for the specified use without
further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from
material and workmanship defects for a period of one year from the invoice date.
If the customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during the
warranty period of one year, with transportation charges prepaid. The returned
product must be properly packaged in its original packaging to obtain warranty
service. If the serial number and the product shipping data differ by over 30 days,
the in-warranty service will be made according to the shipping date. In the serial
numbers the third and fourth two digits give the year of manufacture, and the fifth
digit means the month (e. g., with A for October, B for November and C for
December).
For example, the serial number 1W16Axxxxxxxx means October of year 2016.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the
website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business
day. We are always ready to give advice on application requirements or specific
information on the installation and operation of any of our products.
- 5 -
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections
while the power is on. Sensitive electronic components can be
damaged by sudden power surges. Only experienced electronics
personnel should open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections
lorsque l’alimentation est présente. Des composantes
électroniques sensibles peuvent être endommagées par des
sauts d’alimentation. Seulement du personnel expérimenté devrait
ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all electronic components
in a static-dissipative surface or static-shielded bag when they
are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements
électroniques moderns sont très sensibles aux décharges
d’électricité statique. Toujours utiliser un bracelet de mise à la
terre comme précaution. Placer toutes les composantes
électroniques sur une surface conçue pour dissiper les charge,
ou dans un sac anti-statique lorsqu’elles ne sont pas dans le
chassis.
- 6 -
1 INTRODUCTION
Congratulations on purchasing Winmate® G-WIN Slim IP65 with
Panel PC. The elegantly designed, yet rugged, industrial grade G-
WIN GS65 series is designed for usability with brilliant true-flat
screens, which offer superior readability and Projected Capacitive
Multi-Touch (P-CAP) technology, available in 10.1”, 12.1” and 15”
options.
GS Series Panel PC operates on Intel® Celeron® Bay Trail-M N2930
1.83 GHz processor and supports Windows® operating system. The
Panel PC features Projected Capacitive Multi-Touch (P-CAP). These
models are full IP 65 dustproof and waterproof and have M12
connectors.
1.1 Features
Winmate® G-WIN Slim IP65 with P-CAP Panel PC features:
Intel® Celeron® Bay Trail-M N2930 1.83 GHz
Projected Capacitive Multi-Touch (P-CAP)
Fanless cooling system and Ultra-low power consumption
Flat design
M12 Waterproof connectors
Full IP65 rating
1 x LAN, 1 x RS232/422/485, 1 x USB 2.0
- 7 -
1.2 Package Contents
Carefully remove the box and unpack your device. Please check if
all the items listed below are inside your package. If any of these
items are missing or damaged contact us immediately.
Standard factory shipment list:
Panel PC
Quick Start Guide
(Hardcopy)
Driver CD & User
Manual
Varies by product
specifications
91521110100P
9171111I103I
M12 Power Cable
M12 Serial
Interface Cable
M12 USB/ LAN
Cable
94J003L020K8
94G0123090Q0
94E0128040K0
I/O Protective
Cap x 3
60Y031131000
- 8 -
1.3 Description of Parts
W10IB3S-GSH1
Unit: mm
Dimensions: 263.28 x 173.6 x 40.2
Description
Description
󰈆
9-36V DC (M12 Type)
󰈉
1 Watt Speaker
󰈇
LAN, USB (M12 Type)
󰈊
OSD Control Panel
󰈈
RS232 (M12 Type)
- 9 -
R10IB3S-GST2
Unit: mm
Dimensions: 252.61 x 198 x 36.4
Description
Description
󰈆
9-36V DC (M12 Type)
󰈉
1 Watt Speaker
󰈇
LAN, USB (M12 Type)
󰈊
OSD Control Panel
󰈈
RS232 (M12 Type)
- 10 -
R12IB3S-GSM2(HB)
Unit: mm
Dimensions: 296.2 x 226.7 x 45.5
Description
Description
󰈆
9-36V DC (M12 Type)
󰈉
1 Watt Speaker
󰈇
LAN, USB (M12 Type)
OSD Control Panel
󰈈
RS232 (M12 Type)
- 11 -
R15IB3S-GSC3(HB)
Unit: mm
Dimensions: 363.4 x 277.86 x 45.2
Description
Description
󰈆
9-36V DC (M12 Type)
󰈉
1 Watt Speaker
󰈇
LAN, USB (M12 Type)
󰈊
OSD Control Panel
󰈈
RS232 (M12 Type)
- 12 -
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators (OSD Control Panel) located on
the rear side of the Panel PC.
Physical Buttons
Icon
Button
Description
Reset
Press to reset the system
Power On/
Off
Press to power on or power off the
device
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity
(Data is being read or written)
Off
System is idle
- 13 -
2 GETTING STARTED
2.1 Turning on Your Device
1. Remove the protective cap of the power connector.
2. Connect power cable to the connector of your device. Make sure the
cable fits to the connector, then tighten the O-ring (by turning
clockwise) to secure the connection.
3. The device will boot automatically when powered on.
- 14 -
2.2 How to Enable Watchdog
To enable Watchdog, you need to download Winmate Watchdog
utility. Find more information on Watchdog in “Watchdog Guide” that
you can download from Winmate Download Center or File Share.
Refer to the User Manual for more details.
To enable watchdog in Watchdog AP follow the instructions below:
1. On the right bottom side of the desktop screen, click triangle
button to show hidden icons.
2. Click icon to open Watchdog utility.
- 15 -
3. In Watchdog utility window set countdown time and periodically
feed time, or disable watchdog.
Example:
Every 10 min watchdog will
monitor the system, in case any
error occurs the system will
restart automatically when the
countdown time reaches 0.
Every 9 min watchdog timer will
be reset to 10 min.
Settings
Description
Watchdog Countdown Time
The system automaticity restarts
when this countdown time reaches
zero.
Default: 10 min
Periodically Feed Time
To set a cycle time to automatically
reset watchdog timer.
Default: 9 min
Enable / Disable
Enable or disable watchdog.
Default: Enable
- 16 -
2.3 Turning off Your Device
Disconnect the power cord from the Panel PC to completely turn off
the device.
- 17 -
3 INSTALLATION
3.1 Wiring Requirements
The following common safety precautions should be observed before
installing any electronic device:
Strive to use separate, non-intersecting paths to route power
and networking wires. If power wiring and device wiring paths
must cross make sure the wires are perpendicular at the
intersection point.
Keep the wires separated according to interface. The rule of
thumb is that wiring that shares similar electrical characteristics
may be bundled together.
Do not bundle input wiring with output wiring. Keep them
separate.
When necessary, it is strongly advised that you label wiring to
all devices in the system.
CAUTION
Do not run signal or communication wiring and power wiring in
the same conduit. To avoid interference, wires with different
signal characteristics (i.e., different interfaces) should be routed
separately.
Be sure to disconnect the power cord before installing and/or
wiring your device.
Verify the maximum possible current for each wire gauge,
especially for the power cords. Observe all electrical codes
dictating the maximum current allowable for each wire gauge.
If the current goes above the maximum ratings, the wiring could
overheat, causing serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in,
the internal components generate a lot of heat which may leave
the outer casing too hot to touch.
- 18 -
3.2 Connecting to Other Devices
This Panel PC comes with various interfaces located on the bottom
panel. All of these connectors have been shipped with protective caps.
To ensure the waterproof function can work properly, make sure that
the protective caps and have been securely tightened whenever the
connectors are not used.
IMPORTANT
Please note that when reinstalling the protective cap, it must be fully
tightened to ensure the unit is properly sealed to meet the IP65
enclosure rating.
- 19 -
3.3 Connector Description
The Panel PC features M12 type connectors with protective cap and
has full IP65 rating.
3.3.1 Power Input Connector
Panel PC has M12 type 3 pin male power input connector which
accepts 9-36 V DC power input. Use IP65 power cable to connect the
Panel PC to the source of power.
IMPORTANT:
If ignition pin (IGN_IN) is not connected, the device will
NOT power on.
For test purpose to power-on the device and by-passing
the ignition feature, the IGN_IN needs to be connected
to VIN+.
- 20 -
3.3.2 Serial Interface Connector
Panel PC has M12 type 10 pin male RS-232 connector. Use IP65
serial cable to connect the Panel PC to external devices.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Winmate R15IB3S-GSC3 Guide de démarrage rapide

Taper
Guide de démarrage rapide

dans d''autres langues