Oracle Sun Blade X6240 Product Notes

Marque: Oracle

Modèle: Sun Blade X6240

Catégorie: Les serveurs

Taper: Product Notes

Sun Blade X6240 Server Module

Product Notes

Version 2.2.0

Part No.: E40223-01,

Part No.: April 2013

Please

Recycle

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by

intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate,

broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering,

disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you ﬁnd any errors, please report them to us

in writing.

If this is software or related software documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the

following notice is applicable:

U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware,

and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition

Regulation and agency-speciﬁc supplemental regulations. As such, use, duplication, disclosure, modiﬁcation, and adaptation of the programs, including

any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license

restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any

inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous

applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle

Corporation and its afﬁliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its afﬁliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or

registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of

Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle

Corporation and its afﬁliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and

services. Oracle Corporation and its afﬁliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party

content, products, or services.

Ce logiciel et la documentation qui l’accompagne sont protégés par les lois sur la propriété intellectuelle. Ils sont concédés sous licence et soumis à des

restrictions d’utilisation et de divulgation. Sauf disposition de votre contrat de licence ou de la loi, vous ne pouvez pas copier, reproduire, traduire,

diffuser, modiﬁer, breveter, transmettre, distribuer, exposer, exécuter, publier ou afﬁcher le logiciel, même partiellement, sous quelque forme et par

quelque procédé que ce soit. Par ailleurs, il est interdit de procéder à toute ingénierie inverse du logiciel, de le désassembler ou de le décompiler, excepté à

des ﬁns d’interopérabilité avec des logiciels tiers ou tel que prescrit par la loi.

Les informations fournies dans ce document sont susceptibles de modiﬁcation sans préavis. Par ailleurs, Oracle Corporation ne garantit pas qu’elles

soient exemptes d’erreurs et vous invite, le cas échéant, à lui en faire part par écrit.

Si ce logiciel, ou la documentation qui l’accompagne, est concédé sous licence au Gouvernement des Etats-Unis, ou à toute entité qui délivre la licencede

ce logiciel ou l’utilise pour le compte du Gouvernement des Etats-Unis, la notice suivante s’applique :

U.S. GOVERNMENT END USERS. Oracle programs, including any operating system, integrated software, any programs installed on the hardware,

and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition

Regulation and agency-speciﬁc supplemental regulations. As such, use, duplication, disclosure, modiﬁcation, and adaptation of the programs, including

any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license

restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Ce logiciel ou matériel a été développé pour un usage général dans le cadre d’applications de gestion des informations. Ce logiciel ou matériel n’est pas

conçu ni n’est destiné à être utilisé dans des applications à risque, notamment dans des applications pouvant causer des dommages corporels. Si vous

utilisez ce logiciel ou matériel dans le cadre d’applications dangereuses, il est de votre responsabilité de prendre toutes les mesures de secours, de

sauvegarde, de redondance et autres mesures nécessaires à son utilisation dans des conditions optimales de sécurité. Oracle Corporation et ses afﬁliés

déclinent toute responsabilité quant aux dommages causés par l’utilisation de ce logiciel ou matériel pour ce type d’applications.

Oracle et Java sont des marques déposées d’Oracle Corporation et/ou de ses afﬁliés.Tout autre nom mentionné peut correspondre à des marques

appartenant à d’autres propriétaires qu’Oracle.

Intel et Intel Xeon sont des marques ou des marques déposées d’Intel Corporation. Toutes les marques SPARC sont utilisées sous licence et sont des

marques ou des marques déposées de SPARC International, Inc. AMD, Opteron, le logo AMD et le logo AMD Opteron sont des marques ou des marques

déposées d’Advanced Micro Devices. UNIX est une marque déposée d’The Open Group.

Ce logiciel ou matériel et la documentation qui l’accompagne peuvent fournir des informations ou des liens donnant accès à des contenus, des produits et

des services émanant de tiers. Oracle Corporation et ses afﬁliés déclinent toute responsabilité ou garantie expresse quant aux contenus, produits ou

services émanant de tiers. En aucun cas, Oracle Corporation et ses afﬁliés ne sauraient être tenus pour responsables des pertes subies, des coûts

occasionnés ou des dommages causés par l’accès à des contenus, produits ou services tiers, ou à leur utilisation.

Sun Blade X6240 Server Module

Product Notes

This document contains late-breaking information and issues for the Sun Blade™

X6240 server module.

The following is covered in these product notes:

■ “General Information” on page 2

■ “Sun Blade X6240 Server Module Tools & Drivers DVD” on page 4

■ “Latest Firmware Updates” on page 4

■ “Newly Supported Features” on page 5

■ “Documentation Issues” on page 6

■ “Hardware and BIOS Issues” on page 7

■ “Sun Installation Assistant Issues” on page 12

■ “Integrated Lights Out Manager Issues” on page 16

■ “Diagnostics Issues” on page 21

■ “Operating System Issues” on page 22

■ “Solaris Issues” on page 23

■ “Linux Issues” on page 24

■ “Windows Issues” on page 29

■ “Sun StorageTek RAID Expansion Module (REM) Issues” on page 30

■ “LSI RAID Expansion Module (REM) Issues” on page 31

2 Sun Blade X6240 Server Module Product Notes • April 2013

General Information

Support and Patches for Sun Blade Server

Modules

Support information for the Sun Blade X6240 server module is available at:

http://support.oracle.com

Supported Operating Systems

The following is a list of the minimum versions of supported operating systems for

the Sun Blade X6240 server module:

■ Solaris x86 10 05/08, 64-bit

■ Solaris x86 10 10/08, 64-bit

■ Solaris x86 10 05/09, 64-bit

■ OpenSolaris 2009.06

■ Red Hat Enterprise Linux (RHEL) 4.6 and later, 32-bit/64-bit

■ RHEL 5.1 and later, 64-bit

■ Suse Linux Enterprise Server (SLES) 9 SP4, 64-bit (Not supported in SIA 2.3.8)

■ SLES 10 SP2, 64-bit

■ SLES 11 64-bit

■ VMware ESXi 5.1

■ Windows Server 2003 Enterprise SP2, 32-bit/64-bit

■ Windows Server 2008 Enterprise SP2, 32-bit/64-bit

■ Windows Server 2008 R2 (Not supported in SIA)

Sun Blade X6240 Server Module Product Notes 3

Documentation

Support documentation for the Sun Blade X6240 server module:

■ Sun Blade X6240 Server Module Installation Guide (820-3968)

■ Sun Blade X6240 Server Module Product Notes (820-3972)

■ Sun Blade X6240 Server Module Operating Systems Installation Guide (820-3969)

■ Sun Blade X6240 Server Module Windows Operating System Installation Guide

(820-3970)

■ Sun Installation Assistant for Windows and Linux User’s Guide (820-3357)

■ Sun Blade X6240 Server Module Getting Started Guide (820-3975)

■ Sun ILOM Supplement for Sun Blade X6240 Server Module (820-3974)

■ Sun ILOM 3.0 Supplement for Sun Blade X6240 Server Module (821-0745)

■ Sun ILOM 3.0 Documentation Collection:

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Getting Started Guide (820-5523)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Feature Updates and Release Notes

(820-7329)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide (820-6410)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide

(820-6411)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide (820-6412)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 SMNP and IPMI Procedures Guide

(820-6413)

■ Sun Integrated Lights Out Manager 2.0 User’s Guide (820-1188)

■ Sun Blade X6240 Server Module Service Manual (820-3971)

■ Sun Blade X6240 Server Module Safety and Compliance Guide (820-4411)

These and other Sun Blade server module documents are available at

http://docs.sun.com/app/docs/prod/blade.x6240.

Note – As of the ILOM 3.0.6 release, the Sun Integrated Lights Out Manager (ILOM)

3.0 SNMP and IPMI Procedures Guide has been renamed as the Sun Integrated Lights

Out Manager (ILOM) 3.0 Management Protocols Reference Guide.

4 Sun Blade X6240 Server Module Product Notes • April 2013

Sun Blade X6240 Server Module

Tools & Drivers DVD

The Sun Blade X6240 Server Module Tools & Drivers DVD contains several software

applications and utilities for use with your Sun Blade X6240 server module. This

section describes the applications and utilities and refers you to the associated

readme text files where you can find procedures for running them.

■ ILOM SP update. Used to update the SP firmware; the readme text file is located

in <dvd_drive>:\remoteflash\Firmware_Update.txt.

■ SP recovery utility. Used to recover from corrupt SP firmware; the readme text

file is located in <dvd_drive>:\recovery\readme.txt.

■ Create a Windows 2003 OS Installation CD. Used to create a reburn CD (W2K3

CD with all required drivers); the readme text file is located in

<cd_drive>:\utilities\reburn\readme.txt.

Note – This utility can be performed on a Windows-based system or a

Linux/Solaris-based system.

■ Windows Autorun menu. Simply insert the Tools & Drivers DVD into the X6240

USB CD/DVD, or mount it via ILOM remote KVMS. Then perform any of the

following operations:

■ Install Windows server drivers

■ Create a Windows reburn CD

■ Access links to http://support.oracle.com and associated documentation

■ Solaris/Linux post OS driver update. Used to update Intel Ethernet and AST2000

drivers (if applicable); the install.sh script file is located in

<dvd_drive>:\drivers\linux\red_hat\install.sh

<dvd_drive>:\drivers\linux\suse\install.sh

<dvd_drive>:\drivers\sx86\install.sh.

Latest Firmware Updates

Please go to http://www.sun.com/servers/blades/downloads.jsp for the

latest firmware versions.

Sun Blade X6240 Server Module Product Notes 5

Firmware Supported in Supplemental Software

Release 2.2.0

TABLE 1 identifies the ILOM and BIOS firmware versions that are supported in

Supplemental Software Release 2.2.0.

Newly Supported Features

The following new features are supported as of supplemental software release 2.0:

■ Integrated Lights Out Manager 3.0

■ Sun ILOM Remote Console Lock

■ Sun ILOM Power Management

Integrated Lights Out Manager 3.0

The Sun Blade X6240 server module supports Integrated Lights Out Manager

(ILOM) 3.0 on the service processor (SP) module. For information and instructions

on using ILOM 3.0 with the Sun Blade X6240 server module, see the ILOM 3.0

Documentation Collection and the associated ILOM Supplement for the Sun Blade

X6240 server module:

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Getting Started Guide (820-5523)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Feature Updates and Release Notes

(820-7329)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide (820-6410)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide

(820-6411)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide (820-6412)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 SMNP and IPMI Procedures Guide

(820-6413)

■ Sun Integrated Lights Out Manager (ILOM) 3.0 Supplement for Sun Blade X6240

Server Module (821-0745)

TABLE 1 Server Firmware Versions Available in Supplemental Release 2.2.0

Supplemental Release Version ILOM SP Firmware Version BIOS Firmware Version

2.2.0 3.0.6.12 build r60149 1.20

6 Sun Blade X6240 Server Module Product Notes • April 2013

The ILOM 3.0 Documentation Collection is available at:

http://docs.sun.com/app/docs/prod/int.lights.mgr30#hic

Note – As of the ILOM 3.0.6 release, the Sun Integrated Lights Out Manager (ILOM)

3.0 SNMP and IPMI Procedures Guide has been renamed as the Sun Integrated Lights

Out Manager (ILOM) 3.0 Management Protocols Reference Guide.

Sun ILOM Remote Console Lock

The Sun Blade X6240 server module supports the Sun ILOM Remote Console lock.

The Sun ILOM Remote Console lock feature enhances your system security by

enabling you to lock your computer when terminating a Sun ILOM Remote Console

session. For more information and instructions for using the lock feature, see the Sun

Integrated Lights Out Manager (ILOM) 3.0 Feature Updates and Release Notes (820-7329).

Sun ILOM Power Management

The Sun Blade X6240 server module supports Sun ILOM power management

features. Sun ILOM power management features enable you to monitor and manage

your system’s power consumption. For more information and instructions for using

ILOM power management features, see the Sun Integrated Lights Out Manager

(ILOM) 3.0 Feature Updates and Release Notes (820-7329).

Documentation Issues

The following issues apply to the Sun Blade X6240 server module documentation

set:

■ “Changes to MegaRAID Storage Manager” on page 6

Changes to MegaRAID Storage Manager

The MegaRAID Storage Manager (MSM) program provides you with graphical user

interface (GUI) tools to configure the controllers, physical disk drives, and virtual

disk drives on your system. You can use MSM if your Sun Blade X6240 server

module contains an LSI RAID expansion module (REM).

Sun Blade X6240 Server Module Product Notes 7

The MegaRAID Storage Manager is documented in the Sun LSI 106x RAID User’s

Guide (820-4933) and is available online at:

http://docs.sun.com/app/docs/prod/blade.x6240

This section documents information and procedures that are different when using

MSM with the Sun Blade X6240 server module.

Chapter 7: MegaRAID Storage Manager (MSM)

Installation

▼ To Install MSM on the Windows OS

■ Step 2: The MSM installation package is located on the Tools & Drivers CD in

\utilities\RAIDmgmt\LSI\windows. You also can run MSM from the Tools &

Drivers CD Main menu by selecting Software and Driver Installation > Install

LSI 3081E drivers and Mgmt Software.

■ Step 3: The installation application name is of the form: setup.exe.

Chapter 8: Using MegaRAID Storage Manager

▼ To Start the MSM RAID Configuration Wizard

■ Step 1: You can use the Menu bar to access the RAID configuration wizard by

choosing Operations > Configuration > Config Wizard .

Changing Virtual Disk Properties

You can not change virtual disk properties.

▼ To Rebuild a Drive on a SAS IR System

■ Step 2: You do not need to shut down the server to replace a failed drive.

Hardware and BIOS Issues

The following issues apply to the Sun Blade X6240 server module hardware and/or

BIOS:

■ “BIOS 1.19 Causes Microsoft Windows to Blue Screen During OS Install” on

page 8

8 Sun Blade X6240 Server Module Product Notes • April 2013

■ “Combination of BIOS 1.19 and Qlogic 371-4017 Causes Red Hat 5.5 Kernel to

Panic at Boot” on page 8

■ “Combination of BIOS 1.19 and Qlogic 371-4017 Causes Red Hat 5.5 Kernel to

Panic at Boot” on page 8

■ “ILOM BIOS settings issue” on page 9

■ “ILOM IP address is not updated” on page 9

■ “Power LED issue” on page 10

■ “Disk LED issue” on page 10

■ “Service LED issue” on page 10

■ “System hang during USB initialization” on page 10

■ “Blade server module fails to link up at 1GbE” on page 10

■ “BIOS does not accept the ipmitool persistent boot order change command” on

page 11

■ “BIOS does not accept the ipmitool clear CMOS command” on page 11

■ “Certain devices’ boot option ROM fails to load” on page 11

■ “NEM model X4238 requires latest BIOS firmware” on page 11

BIOS 1.19 Causes Microsoft Windows to Blue

Screen During OS Install

During the "Installing Devices" portion (phase 2) of the MS Windows install, BIOS

1.19 causes the HBA ports to be offlined, which in turn causes IO errors and a

subsequent blue screen.

Fix Available:

Load software supplement 2.2.0.

Combination of BIOS 1.19 and Qlogic 371-4017

Causes Red Hat 5.5 Kernel to Panic at Boot

Red Hat 5.5 kernel panics at boot when a system is running BIOS 1.19 and Qlogic

371-4017.

Fix Available:

Fix is available with BIOS 1.20.

Sun Blade X6240 Server Module Product Notes 9

Hot Plug of Dual Port InfiniBand (SDR) Express

Module(PN: X1288A-Z) Does Not Work With

Solaris

When a user boots the system to Solaris and then installs an Express Modules

X1288A-Z, the hot-plug function can not work by pressing the attn button. If the

user manually configures this IB PEM with cfgadm command, the following error

message appears:

cfgadm: Hardware specific failure: configure failed

Workaround:

Install the IB-PEM card before powering on the system.

ILOM BIOS settings issue

If ILOM is set to use a DHCP assigned IP address, and the DHCP server is offline,

wait until the DHCP server is online before attempting to reboot. Issuing a reboot or

manually changing from DHCP to a static IP address will result in incorrect gateway

and IP address settings to be recorded. Once DHCP is restored, the original IP

address will be assigned.

Workaround:

Do not reboot the server until DHCP is restored, or connect a terminal to the serial

console’s NET Management port and manually assign a static IP address if access is

urgently required to ILOM.

ILOM IP address is not updated

If the ILOM IP address is changed via the LAN configuration in the BIOS, the IP

address will not update. The old IP address is displayed. It is recommended to

change the IP address via ILOM.

If you choose to change the ILOM IP address via BIOS, exit and re-enter the LAN

configuration screen to see the changes.

10 Sun Blade X6240 Server Module Product Notes • April 2013

Power LED issue

The green LED Power LED incorrectly stops blinking and turns solid green once

ILOM detects that the power is good. The green Power LED should stop blinking

and turn solid only when the operating system is ready.

Disk LED issue

Due to a hardware limitation, the Blue Disk Ready-to-Remove LED will not

illuminate when executing the cfadm command.

Service LED issue

Due to a hardware limitation, the amber Service LED will not illuminate.

System hang during USB initialization

When inserting the dongle cable in to the server module, the system might hang

during universal serial bus (USB) initialization.

Workaround:

Remove and reinsert the dongle cable into the server module.

Blade server module fails to link up at 1GbE

If the Sun Blade X6240 server module is inserted into certain slots in the Sun Blade

6048 chassis, it fails to link up at 1GbE with the X5196A-Z Sun Blade 6048 Infiniband

Switched Network Express Module (NEM). This issue occurs primarily on the inner

slots (BL3-BL8). These slots can only link up at 100Mb.

Workaround:

Use the outer slots (BL0-BL2 and BL9-BL11) to link up at 1GbE.

This issue is under investigation.

Sun Blade X6240 Server Module Product Notes 11

BIOS does not accept the ipmitool persistent

boot order change command

The BIOS fails to permanently modify the boot order after sending the ipmitool

persistent boot order change command.

Workaround:

This issue is fixed in the Tools & Drivers DVD 1.3 and later software release.

BIOS does not accept the ipmitool clear CMOS

command

The BIOS fails to clear all setup settings and load system defaults after sending the

ipmitool clear CMOS command.

Workaround:

This issue is fixed in the Tools & Drivers DVD 1.3 and later software release.

Certain devices’ boot option ROM fails to load

A shadow ROM space issue exists when multiple bootable devices are installed in

the system. Not all devices’ bootable option ROMs will successfully load.

Workaround:

This issue is fixed in the Tools & Drivers DVD 1.3 and later software release. Users

will have the option to select which option ROM to load in the BIOS setup window.

NEM model X4238 requires latest BIOS firmware

Network express module (NEM) model X4238 requires the latest BIOS firmware to

work properly. The required BIOS firmware (version 1.3) is located on the Sun Blade

X6240 Server Module Tools & Drivers DVD.

12 Sun Blade X6240 Server Module Product Notes • April 2013

Sun Installation Assistant Issues

The following issues apply to the Sun Installation Assistant (SIA) software:

■ “LVM partitioning is not supported when installing SLES 10 SP2 operating

system” on page 12

■ “SLES 9 SP4 operating system is not supported using SIA” on page 12

■ “SIA will not install Infiniband drivers for Windows operating systems” on

page 13

■ “SIA will not install FEM/NEM drivers for 32-bit Linux operating systems” on

page 13

■ “SIA will not install FEM drivers for Windows 2003” on page 13

■ “RHEL installed using SIA reports a MPT Fusion ctl drivers error” on page 14

■ “SIA displays ILOM version as Unknown” on page 14

■ “SIA displays incorrect chassis information” on page 14

■ “SIA does not display storage controllers” on page 15

■ “SIA displays error when installing using PXE method” on page 15

■ “SIA Update function fails” on page 15

■ “SIA does not install operating systems via PXE server” on page 15

LVM partitioning is not supported when

installing SLES 10 SP2 operating system

Change Request ID: 6780100

If LVM disk partitioning is selected when installing the SLES 10 SP2 operating

system using SIA, the installation will fail because the platform drivers will not

install correctly.

Workaround: None

SLES 9 SP4 operating system is not supported

using SIA

Change Request ID: 6771799

Sun Blade X6240 Server Module Product Notes 13

Do not use SIA to install the SLES 9 SP4 as SIA does not support this operating

system.

Workaround: None

SIA will not install Infiniband drivers for

Windows operating systems

Change Request ID: 6771790 and 6771803

Infiniband (IB) drivers for the IB passthru FEM (fabric express module) and IB NEM

(network express module) will not install correctly when installing Windows

2003/2008 using SIA.

Workaround: None

SIA will not install FEM/NEM drivers for 32-bit

Linux operating systems

Change Request ID: 676068

Model x1029A fabric express module (FEM) and model x4236A network express

module (NEM) drivers will not install correctly when installing Linux (such as

RHEL 32-bit and SLES 10 32-bit) using SIA.

Workaround: None

SIA will not install FEM drivers for Windows

2003

Change Request ID: 6769562

If SIA is used to install Windows 2003 on a system that contains the model x1029A

FEM, the associated device will be highlighted with a yellow question mark in the

Windows Device Manager, indicating that the drivers are not installed correctly.

Workaround: None

14 Sun Blade X6240 Server Module Product Notes • April 2013

RHEL installed using SIA reports a MPT Fusion

ctl drivers error

Change Request ID: 6737853

If SIA is used to install RHEL 4.6 on a system that does not contain a Sun Blade I/O

Expansion Module II (mptsas) controller, the following error will occur when RHEL

boots:

starting MPT Fusion ctl drivers FAILED

This error is harmless and can be ignored.

Workaround: None

This issue will be fixed in future software release.

SIA displays ILOM version as Unknown

Change Request ID: 6878691

When installing the Linux operating system using SIA version 2.3.8, the ILOM

version is displayed as “Unknown” in the System Information screen.

This issue will be fixed in future software release.

SIA displays incorrect chassis information

Change Request ID: 6878692

When installing the Linux operating system using SIA version 2.3.8, the System

Information screen displays incorrect information for the chassis type, serial number,

and version number.

This issue will be fixed in future software release.

Sun Blade X6240 Server Module Product Notes 15

SIA does not display storage controllers

Change Request ID: 6878694

When installing the Linux operating system using SIA version 2.3.8, the System

Information screen does not display system storage controllers.

This issue will be fixed in future software release.

SIA displays error when installing using PXE

method

Change Request ID: 6879495

When installing some operating systems using SIA version 2.3.8, SIA might display

the following error message while SIA is determining the OS:

“Provide a valid URL”

This message can be ignored. The OS installation will complete successfully.

This issue will be fixed in future software release.

SIA Update function fails

Change Request ID: 6875404

When selecting the SIA Update function in SIA 2.3.8, SIA might display the

following error message:

“SIA update failed…”

This issue will be fixed in future software release.

SIA does not install operating systems via PXE

server

Change Request ID: 6876850

When using SIA version 2.3.8 to install OSes via a PXE server, SIA displays the

following error message during the OS installation:

Error enabling swap device sda2: Invalid argument

16 Sun Blade X6240 Server Module Product Notes • April 2013

This error affects all OS installations that SIA supports. This error occurs after the

disk partition phase of the OS installation and might indicate that the swap device

has not been initialized.

Workaround:

Add parameter iommu=soft in PXE server.

Integrated Lights Out Manager Issues

The following issues apply to the Sun Blade X6240 server module Integrated Lights

Out Manager service:

■ “SP Event Log Generates Excessive Critical Events” on page 17

■ “Delaying BIOS Upgrade During Firmware Update Can Corrupt BIOS” on

page 17

■ “Minimum Supported Browsers” on page 18

■ “No warning when password length is exceeded” on page 18

■ “Running Pc-Check in manual mode fails to unmount the virtual floppy” on

page 18

■ “KVMS authentication does not work with remote authentication mechanisms”

on page 19

■ “Solaris Remote Console session requires Java plugin” on page 19

■ “Service processor might take up to 3 minutes to start” on page 20

■ “Error message appears during service processor startup” on page 20

■ “FRU data for the hard disk drives is not passed via ipmitool” on page 20

■ “Hard disk error message in the SP event log” on page 21

■ “DIMM SPD data are reported incorrectly in the FRU data” on page 21

For more information about the ILOM, see the online Sun Integrated Lights Out

Manager 2.0 User’s Guide (820-1188) or the Sun Integrated Lights Out Manager 3.0

Documentation Collection.

Sun Blade X6240 Server Module Product Notes 17

SP Event Log Generates Excessive Critical Events

Minor and/or informational events are classified as critical, which generate useless

email alerts.

Fix Available:

Fix is available with BIOS 1.20.

Delaying BIOS Upgrade During Firmware Update

Can Corrupt BIOS

The ILOM SP firmware upgrade procedure includes the Delay BIOS Update

option, which delays the BIOS update until the host is reset. This option allows you

to update the firmware without resetting the host.

The following scenarios can cause your BIOS to corrupt:

■ If you select the Delay BIOS Update option, then power down the host and

remove the server module from its slot before the BIOS update is complete.

■ If you select the Delay BIOS Update option, then power down the host and

power on the server module immediately before the BIOS update is complete.

■ If you start another SP firmware update before the BIOS update has been

completed.

Workaround:

Do not select the Delay BIOS Update option. If you choose to use the Delay

BIOS Update option:

1. Do not remove the server module from its slot until after the host has been reset

and the BIOS update is complete.

2. If you are powering off the system for the first time after ILOM is upgraded, do

not power on the host until the BIOS update is complete.

3. Do not attempt to update the SP firmware until after the host has been reset and

the BIOS update is complete.

Note – The BIOS update after host power-off might take 3-4 minutes.

18 Sun Blade X6240 Server Module Product Notes • April 2013

Minimum Supported Browsers

TABLE 2 shows the minimum supported browser versions for running the Integrated

Lights Out Manager (ILOM) web interface for the Sun Blade X6240 server module

on Solaris and Linux operating systems.

No warning when password length is exceeded

No errors or warnings are issued to the user when the user exceeds the 16-character

limit for passwords via the web interface.

Workaround:

This issue is scheduled to be fixed in a future ILOM firmware release.

Running Pc-Check in manual mode fails to

unmount the virtual floppy

The virtual floppy device fails to unmount when running Pc-Check in manual mode.

This causes the system to run Pc-Check on every system reboot.

Workaround:

1. Set /SP/diag to disabled.

2. Power off the system.

3. Power on the system.

TABLE 2 Version Numbers for Browsers

Solaris x86 RHEL 32-bit RHEL 64-bit SLES 32-bit SLES 64-bit Windows

Mozilla 1.7 1.7.12 1.7.13 1.7.8 1.7.13 N/A

Firefox 1.5.0.4 1.0.7 1.5.0.4 1.5.0.4 1.5.0.4 1.5.0.4

Internet

Explorer

N/A N/A N/A N/A N/A

La page est en cours de chargement...

Oracle Sun Blade X6240 Product Notes

Marque: Oracle

Modèle: Sun Blade X6240

Catégorie: Les serveurs

Taper: Product Notes

Télécharger le PDF

rapport

dans d''autres langues

English: Oracle Sun Blade X6240

Oracle Sun Blade X6240 Product Notes

Oracle Sun Blade X6240 Product Notes

dans d''autres langues

Documents connexes

Autres documents