B02/B05-BL

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Dear customer,

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

Features

SONOFF LED is a LED smart bulb that allows users to adjust the brightness and color,

and remotely turn on/off the connected devices via your smartphone, schedule it on/off

and share it to your family to control together.

3. Power on

After powering on, the device will enter the Bluetooth Pairing mode during the first use.

The device enters the “breathing mode”.

The device will exit the Bluetooth Pairing mode if not paired within 3mins. If you

want to enter this mode, please press the manual switch three times repeatedly at an

interval of ever 1s (Off-ON-Off-ON-Off-ON). The “breathing mode” indicates the light

If you fail to enter Bluetooth Pairing Mode, please try “Compatible Pairing Mode” to pair.

1. Press the light switch 5 times repeatedly at an interval of every 1s (Off-ON-Off-

2. Tap “+” and select “Compatible Pairing Mode” on APP.

Enter Wi-Fi password and tap “Next”: Be patient until pairing completes.

For iOS system:

Enter Wi-Fi password, tap “Next” and then “Connect”. Select Wi-Fi SSID with ITEAD-

If you need to change the network, press the light switch 3 times repeatedly at an

interval of every 1s (Off-ON-Off-ON-Off-ON) when the light is on. The “breathing mode”

indicates the device enters Bluetooth pairing mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to factory setting.

Common Problems

Q: Why this device always failed to add?

A: Please solve this problem according to the following methods:

4. Maybe the MAC address filtering is open. Please turn it off.

5. Ensure steady enough network.

Q: How many control methods are available for this device?

A: 3 control methods available, including Wi-Fi & LAN control and “eWeLink Remote”

Control.

Q: How to check whether this device is offline?

A: There is prompt of offline device in the device home page in eWeLink app when this

device is offline.

Q: What new features can be accessed during this device is in “eWeLink Remote” remote

A: In this mode, it is available to adjust the brightness, color temperature and color, even

you can control this device via Bluetooth or “eWeLink Remote” remote control.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you

need repair or other services during the warranty period, contact the product seller

person or mechanically through the fault of the buyer (e.g., during transport,

cleaning by inappropriate means, etc.).

batteries, etc.).

electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage,

electrostatic discharge voltage (including lightning), faulty supply or input voltage and

inappropriate polarity of this voltage, chemical processes such as used power

supplies, etc.

výrobku, je nutné předložit originální doklad o koupi s datem nákupu.

nedodržování pokynů pro údržbu, provoz a servis výrobku.

mechanicky vinou kupujícího (např. při přepravě, čištění nevhodnými prostředky

elektromagnetické pole, vniknutí kapaliny, vniknutí předmětu, přepětí v síti,

elektrostatický výboj (včetně blesku), vadné napájecí nebo vstupní napětí a nevhodná

polarita tohoto napětí, chemické procesy, např. použité zdroje atd.

účelem změny nebo rozšíření funkcí výrobku oproti zakoupené konstrukci nebo

použití neoriginálních součástí.

musí být vrácen na místo nákupu nebo předán na veřejné sběrné místo

Vážený zákazník,

nasledujúce pokyny a uschovajte si tento návod na použitie. Venujte osobitnú pozornosť

bezpečnostným pokynom. Ak máte akékoľvek otázky alebo pripomienky k prístroju,

obráťte sa na linku služieb zákazníkom.