Winmate R19IK3S-SPM1 Manuel utilisateur

Please read this instructions before operating the device and retain them for future reference.

IP65 Stainless P-Cap

15/17/19/21.5” Panel PC

Intel® Core™ i5-7200U Kaby Lake

Model No.:

R15IK3S-SPC3

R17IK3S-SPA1

R19IK3S-SPM1

W22IK3S-SPA3

User Manual

Version 1.0

2

IP65 Stainless P-Cap Panel PC User Manual

Contents

Preface ................................................................................................................................. 4

About This User Manual ..................................................................................................... 9

Chapter 1: Introduction .................................................................................................... 10

1.1 Introduction ........................................................................................................ 11

1.2 Product Features ................................................................................................ 11

1.3 Package Content ................................................................................................ 12

1.4 Connector Placement ......................................................................................... 13

1.5 Physical Buttons and LED Indicators ................................................................. 13

1.6 Schematics and Dimensions .............................................................................. 14

1.6.1 Dimensions 15" ......................................................................................... 14

1.6.2 Dimensions 17” ......................................................................................... 14

1.6.3 Dimensions 19” ......................................................................................... 15

1.6.4 Dimensions 21.5” ...................................................................................... 15

Chapter 2: Getting Started ........................................................................................ 16

2.1 Powering On ...................................................................................................... 17

2.1.1 AC Adapter Components .......................................................................... 17

2.1.2 Power Considerations............................................................................... 18

2.1.3 Power Consumption ................................................................................. 18

2.1.4 Turning On/ Off Your Device .................................................................... 18

2.2 Connector Pin Assignments ............................................................................... 19

2.2.1 Power Cable ............................................................................................. 19

2.2.2 Serial Cable .............................................................................................. 20

2.2.3 Ethernet Cable .......................................................................................... 21

2.2.4 USB 2.0 Cable .......................................................................................... 22

2.3 Cleaning the Monitor .......................................................................................... 23

Chapter 3: Mounting .................................................................................................... 24

3.1 Cable Mounting Considerations ......................................................................... 25

3.2 Safety Precautions ............................................................................................. 25

3.3 VESA Mount ....................................................................................................... 26

3.4 Yoke Mount ........................................................................................................ 27

Chapter 4: Operating the Device ............................................................................. 28

4.1 Operating System ............................................................................................... 29

4.2 Multi-Touch ........................................................................................................ 29

3

Preface

4.3 How to Enable Watchdog ................................................................................... 30

Chapter 5: Insyde BIOS Setup .................................................................................. 31

5.1 How and When to Use BIOS Setup.................................................................... 32

5.2 BIOS Functions .................................................................................................. 33

5.2.1 Main Menu ................................................................................................ 33

5.2.2 Advanced .................................................................................................. 34

5.2.3 Boot .......................................................................................................... 49

3.2.3 Security ..................................................................................................... 52

5.2.4 Power ....................................................................................................... 53

5.2.5 Exit ........................................................................................................... 54

5.3 Using Recovery Wizard to Restore Computer .................................................... 55

Chapter 6: Driver Installation ................................................................................... 56

6.1 Chipset Driver..................................................................................................... 57

6.2 Graphic Driver .................................................................................................... 59

6.3 Management Engine (ME) ................................................................................. 64

6.4 Audio Driver ....................................................................................................... 67

6.5 Ethernet Driver ................................................................................................... 68

6.6 Watchdog Driver Installation .............................................................................. 71

Chapter 6: Technical Support ................................................................................... 76

7.1 Software Developer Support .............................................................................. 77

7.2 Problem Report Form ......................................................................................... 77

Appendix A: Product Specifications ............................................................................... 78

4

IP65 Stainless P-Cap Panel PC User Manual

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form or

by any means, electronic or mechanical, for any purpose, without the prior written permission

of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits and/or

software described or contained in this manual in order to improve design and/or performance.

We assume no responsibility or liability for the use of the described product(s) conveys no

license or title under any patent, copyright, or masks work rights to these products, and make

no representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. We make no representation or guarantee that such

application will be suitable for the specified use without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a defect, we

will, at his/her option, repair or replace the defective product at no charge to the customer,

provide it is returned during the warranty period of one year, with transportation charges

prepaid. The returned product must be properly packaged in its original packaging to obtain

warranty service. If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers the third

and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,

with A for October, B for November and C for December).

For example, the serial number 1W18Axxxxxxxx means October of year 2018.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

5

Preface

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

Note:

A note is used to emphasize helpful information

Important:

An important note indicates information that is important for you to know.

Caution/ Attention

A Caution alert indicates potential damage to hardware and explains how to avoid

the potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

Warning!/ Avertissement!

An Electrical Shock Warning indicates the potential harm from electrical hazards

and how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

Alternating Current Mise à le terre !

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risqué potential de choc électrique grave

à la terre incorrecte.

6

IP65 Stainless P-Cap Panel PC User Manual

Safety Information

Warning!/ Avertissement!

Always completely disconnect the power cord from your chassis whenever you

work with the hardware. Do not make connections while the power is on.

Sensitive electronic components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous travaillez

sur celui-ci. Ne pas brancher de connections lorsque l’alimentation est

présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

Caution/ Attention

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As a

safety precaution, use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique avant

de toucher la carte CPU. Les équipements électroniques moderns sont très

sensibles aux décharges d’électricité statique. Toujours utiliser un bracelet de

mise à la terre comme précaution. Placer toutes les composantes électroniques

sur une surface conçue pour dissiper les charge, ou dans un sac anti-statique

lorsqu’elles ne sont pas dans le chassis.

For your safety carefully read all the safety instructions before using the device. Keep this user

manual for future reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or

spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment and must

be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it fall could

cause damage.

 The openings on the enclosure are for air convection and to protect the equipment from

overheating.

Caution/Attention

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the power

source is correct.

 Position the power cord so that people cannot step on it. Do not place anything over the

power cord.

 If the equipment is not used for a long time, disconnect it from the power source to avoid

damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel should

open the equipment.

 All cautions and warnings on the equipment should be noted.

7

Preface

*Let service personnel to check the equipment in case any of the following

problems appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work according to

the user manual.

o The equipment has been dropped and damaged.

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

Caution/Attention

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque de

blessure.

Warning!/ Avertissement!

Only use the connection cords that come with the product. When in doubt,

please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le produit. Si

vous doutez de leur provenance, contactez le manufacturier.

Warning!/ Avertissement!

Always ground yourself against electrostatic damage to the device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se décharge

pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap connected

to a work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

8

IP65 Stainless P-Cap Panel PC User Manual

Important Information

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

EC Declaration of Conformity

This equipment is in conformity with the requirement of the

following EU legislations and harmonized standards. Product also

complies with the Council directions.

Electromagnetic Compatibility Directive (2014/30/EU)

 EN55024: 2010 EN 55022: 2010 Class B

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2013

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55022: 2010/AC:2011

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013

9

About This User Manual

This User Manual provides information about using the Winmate® IP65 Stainless P-Cap Panel PC

with Intel® Core™ i5-7200U Kaby Lake processor. This User Manual applies to the IP65 Flat

Stainless P-Cap Panel PC – R15IK3S-SPC3, R17IK3S-SPA1, R19IK3S-SPM1, and W22IK3S-

SPA3.

The documentation set for the IP65 Flat Stainless P-Cap Panel PC provides information for

specific user needs, and includes:

 IP65 Stainless P-Cap Panel PC User Manual – contains detailed description on how to

use the Panel PC, its components and features.

 IP65 Stainless P-Cap Panel PC Quick Start Guide - contains detailed description on how

to use the Panel PC, its components and features.

Note:

Some pictures in this guide are samples and can differ from actual product.

Document Revision History

Version

Date

Note

1.0

13-Sept-2018

Initial document release

10

IP65 Stainless P-Cap Panel PC User Manual

Chapter 1: Introduction

This chapter gives you product overview, describes features and

hardware specification. You will find all accessories that come

with the Panel PC in the packing list. Mechanical dimensions and

drawings included in this chapter.

11

Chapter 1: Introduction

1.1 Introduction

Congratulations on purchasing Winmate® IP65 Flat Stainless P-CAP Series Panel PC.

Winmate IP65 Flat Stainless P-CAP Series Panel PC is rugged, industrial-grade panel PC series

built to withstand challenging environments, undergoing rigorous testing to ensure safety and top

performance. All of the models in the series are sealed to IP65 standard. Stainless housing

features anti-corrosion properties making it suitable for food, chemical and pharmaceutical

industries. P-CAP multi-touch screen supports glove mode and provides even more convenience

for the operator.

Winmate IP65 Flat Stainless P-CAP Panel PC goes beyond that of the standard industrial panel

computers with elegant, edge-to-edge design, rugged construction, powerful performance, and

flexible mounting options.

The IP65 stainless series work well in food, beverage industry, including food processing

operations and packaging, chemical manufacturing and other industrial applications.

1.2 Product Features

The IP65 Stainless P-Cap Panel PC features:

 Intel® Core™ i5-7200U Kaby Lake 2.5GHz (turbo to 3.1GHz)

 SUS304 stainless steel for food and chemical industries

 Full IP65 waterproof enclosure, good corrosion resistance

 A true flat, easy-to-clean front surface with edge-to-edge design

 Flat multi-touch panel pc with superior readability and P-CAP technology

 Various mounting solutions, Yoke mount and VESA mount

 Plenty of I/O s including USB 2.0, RS-232 serial port and RJ45-10/100/1000 LAN ports

 Waterproof ports with adapter cables for external connectivity

 Supports VESA mount

 Supports Rain/ Glove mode (Optional)

12

IP65 Stainless P-Cap Panel PC User Manual

1.3 Package Content

Carefully remove the box and unpack your device. Please check if all the items listed below are

inside your package. If any of these items are missing or damaged contact us immediately.

Standard shipment list:

 Panel PC

Varies by product

specifications

 Quick Start Guide

(Hardcopy)

91521110102W

 Driver CD & User

Manual

9171111K102L

 AC Adapter

80W: 90PO12080003

 Power Cable*

Varies by country

 Serial Cable

94G0103090Q0

 Ethernet Cable

94I0080080KF

 USB Cable

9480108080Q0

 VESA Screws

913511101101

13

Chapter 1: Introduction

1.4 Connector Placement

IP65 Flat Stainless P-CAP Panel PC has IP65 type connectors with protection cap. For cable

specifications refer to the Ch.2,“Cable Specifications” of this user manual.

1.5 Physical Buttons and LED Indicators

Physical buttons and LED indicators located on the rear side of the Panel PC.

Physical Buttons

Icon

Button

Description

Reset

Press to reset the system

Power On/ Off

Press to power on or power off the device

LED Indicators

LED Type

Status

Description

On

Power is on

Off

Power is off

Blinking

Storage activity (Data is being read or written)

Off

System is idle

14

IP65 Stainless P-Cap Panel PC User Manual

1.6 Schematics and Dimensions

This section contains mechanical drawing of the Panel PC. Notice that this is a simplified drawing

and some components are not marked in detail.

1.6.1 Dimensions 15"

Unit: mm

Dimensions : 378 x 301 x 56.4

1.6.2 Dimensions 17”

Unit: mm

Dimensions : 412 x 344 x 61.3

15

Chapter 1: Introduction

1.6.3 Dimensions 19”

Unit: mm

Dimensions : 467.4 x 392 x 56.6

1.6.4 Dimensions 21.5”

Unit: mm

Dimensions : 541 x 337 x 53

16

IP65 Stainless P-Cap Panel PC User Manual

Chapter 2: Getting Started

This chapter tells you important information on power supply, adapter

and precautions tips. Pay attention to power considerations.

17

Chapter 1: Introduction

2.1 Powering On

2.1.1 AC Adapter Components

AC Adapter supplied with the power cord.

AC Adapter specifications vary by panel size.

Size

15”

19”

21.5”

AC Adapter

12V/ 80W

Safety Precautions:

 Do not use the adapter in a high moisture environment

 Never touch the adapter with wet hands or foot

 Allow adequate ventilation around adapter while using

 Do not cover the adapter with paper or other objects that will reduce cooling

 Do not use the adapter while it is inside a carrying case

 Do not use the adapter if the cord is damaged

 There are NO serviceable parts inside

 Replace the unit if it is damaged or exposed to excess moisture

While using the AC Adapter always:

 Plug-in the power cord to easy accessible AC outlet

 Plug-in the AC adapter to a grounded outlet

AC Adapter

Power Cord

Alternating Current Mise à le terre !

This product must be grounded. Use only a grounded AC outlet. Install the

additional PE ground wire if the local installation regulations require it.

*If you do not use a grounded outlet while using the device, you may notice an

electrical tingling sensation when the palms of your hands touch the device.

Ce produit doit être mis à la terre. Utiliser seulement un cordon d’alimentation

avec mise à la terre. Si les règlements locaux le requiert, installer des câbles

de mise à la terre supplémentaires.

*Si vous n’utiliser pas une prise d’alimentation avec mise à la terre, vous

pourriez remarquer une sensation de picotement électrique quand la paume

de vos mains touche à l’appareil.

18

IP65 Stainless P-Cap Panel PC User Manual

2.1.2 Power Considerations

The Panel PC operates on external DC power. Use the AC adapter included in the package.

Caution/Attention

Use only the AC adapter included in your package. Using other AC adapters may

damage the device.

Utiliser seulement le convertisseur AC inclu avec votre appareil. Utiliser d’autres

convertisseurs pourraient endommager l’appareil.

2.1.3 Power Consumption

The table below shows power consumption and AC adapter for the Flat Stainless P-CAP Panel PC.

Size

15”

19”

21.5”

Power Consumption*

52W (typ.)

56W (typ.)

66W (typ.)

*With maximum backlight and high CPU load.

2.1.4 Turning On/ Off Your Device

To turn on your device:

1. Connect the AC adapter to the DC-in jack connector located on the back side of the

Panel PC.

2. Connect the power cord to AC adapter.

3. Plug the power cord to the AC outlet and the device will turn on automatically.

To turn off your device:

To shut down your device, do the following: Tap Start ( ) > Shut down.

Wait for your Panel PC to completely turn off before disconnecting the power cord (if necessary).

19

Chapter 1: Introduction

2.2 Connector Pin Assignments

This Panel PC is equipped with four M25 type waterproof connectors. Use only the cables that are

included in the package. The pin assignments of the cables are as follows.

2.2.1 Power Cable

The IP65 Stainless P-Cap Panel PC has M25 type connector. Use power cable to connect Panel

PC to the source of power.

IP65 Stainless P-Cap Panel PC support 12V DC power input.

20

IP65 Stainless P-Cap Panel PC User Manual

2.2.2 Serial Cable

The IP65 Stainless P-Cap Panel PC has M25 type serial port connector. Use serial cable to

connect serial interfaces.

La page est en cours de chargement...

Winmate R19IK3S-SPM1 Manuel utilisateur

Ce manuel convient également à

Winmate R19IK3S-SPM1 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents