Dustbane Targa Series Operations Manual

Catégorie
Aspirateurs
Taper
Operations Manual
Parts & Operations Manual
Manuel de pièces et d’opérations
Targa Eco Series
Vacuums / Aspirateurs
28540 (Targa Enviro Vac) / 28541 (Targa 330) / 28542 (Targa 660) / 28543 (Targa 990) /
28544 (Targa XL 12) / 28545 (Targa XL 12 Dolly) / 28546 (Targa XL 18 Dolly) / 28547 (Targa XL 18 Tip & Pour)
Date of Issue / Date d’émission : 2018-07
Serial Number / Numéro de série : Date of Purchase / Date d’achat :
Distributor Name / Nom du distributeur :
3Parts & Operations Manual Targa Eco Series
Safety, Operations and Maintenance
Save these instructions. Read and follow all warnings and cautions before using this vacuum. This unit is intended for commercial use.
This vacuum will give you many years of trouble-free operating satisfaction, provided it is given proper care. All parts have passed
rigid quality control standards prior to their assembly to produce the nal product. Prior to packaging, your vacuum was again
inspected for assurance of awless assembly.
This vacuum is protectively packed to prevent damage in shipment. We recommend that upon delivery, you unpack the unit and
inspect it for any possible damage. Only a visual examination will reveal damage that may have occurred during shipping.
Important Safety Instructions
WARNING: Read all instructions before using your Dustbane Targa.
To reduce the risk of re, electric shock or injury:
• Do not leave Targa plugged in. Unplug from outlet when not in use and before servicing.
• Always turn o Targa before connecting or disconnecting motorized nozzle.
• When using 430 or 499 Power nozzle attachment do not use it on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only Dustbane recommended attachments.
• Do not use with damaged cord or plug. If Targa is not working as it should, has been dropped, damaged, left outdoors,
ordropped into water, return it to a service centre.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
• Do not run appliance over cord. Keep cord away from heated surface.
• Do not lift lled tank and vacuum by handle on head, remove Vac head before lifting.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything
thatmay reduce airow.
• Keep hair, loose clothing, ngers and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking such as cigarettes, matches, or hot ashes.
• Do not use without dust bag and/or lters in place.
• Turn o all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up ammable or combustible liquids such as gasoline or use in areas where they may be present.
• Always turn o Targa before connecting or disconnecting motorized nozzle.
• Targa Enviro Vac, Targa 330 and 660 are for dry use only; do not use outdoors or on wet surfaces.
• Use Targa vacuums indoors only.
N.B. This vacuum is intended for commercial use only.
4 Parts & Operations Manual Targa Eco Series
Grounding Instructions
IMPORTANT: Improper grounding method can result in a risk of electrical shock.
All Targa vacuums must be connected to a properly grounded outlet only. If it should
malfunction or breakdown, grounding provides a path of least resistance for electric current
to reduce the risk of shock. Dustbane Targa vacuums are equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be inserted into an
appropriate outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
WARNING: Improper connection of the equipment grounding conductor can result in a risk of
electric shock. Check with a qualied electrician or service person if you are in doubt as to whether
the outlet is properly grounded. Do not modify the plug provided with the appliance – if it will not t
the outlet, have a proper outlet installed by a qualied electrician. RATED LESS THAN 15AMPERES
AND INTENDED FOR USE ON A NOMINAL 120-VOLT SUPPLY CIRCUIT: the Targa vacuums have
a grounding attachment plug that looks like the plug illustrated. Make sure that the vacuum is
connected to an outlet having the same conguration as the plug. No adaptor should be used
withthese vacuums.
Getting Started
Unpack
Remove vacuum and accessories from packaging and verify that everything listed on the parts list is present.
Assembly – Dry Pickup
GROUNDING PIN
BRANCHE DE MISE À LA TERRE
GROUNDED OUTLET
PRISE DE COURANT
GROUNDING INSTRUCTIONS
DIRECTIVES DE MISE À LA TERRE
1. If you wish to use a paper-lter bag,
attach it to the inlet and wrap the bag
around the inside of the tank.
2. Insert dry lter in canister ensuring it is
correctly snapped in position.
3. Insert bag ring (jogger ring).
4. Position bag ring (jogger ring) at the
bottom of the dry lter.
5. If you use an HEPA lter, attach the
lter to the base of the head . Screw
inposition using the clamp provided.
5Parts & Operations Manual Targa Eco Series
Assembly – Wet Pickup
Assembly – Wet & Dry Pickup
Wiring Diagram
1. Insert wet lter in canister ensuring
it is correctly snapped in position.
1. Once lter(s) are correctly installed,
putthe vacuum head on the canister
and clamp securely.
2. Attach swivel connector of suction
hose to inlet nozzle on tank.
Targa Enviro Vac Targa 330, 660, 990, XL 12, XL 12 Dolly,
XL 18, 18 Tip & Pour
6 Parts & Operations Manual Targa Eco Series
Maintenance
Tips
Store your vacuum cleaner indoors in a cool, dry area not exposed to the weather to avoid electrical shock and/or damage
tothevacuum.
The Targa Enviro Vac, 330 and 660 employ an Automatic Thermal Switch which shuts o the entire vacuum should the motor
temperature exceed an acceptable level. Should this shut-o occur, unplug the vacuum and inspect lter and hose for signs
ofblockage. The Thermal Switch will reset itself in approximately 20 minutes.
Hose Care
To extend the life of your hose, we recommend the following practices:
1. Avoid stepping on the hose or placing heavy objects on top of the hose.
2. Avoid excessive tugging on the hose.
3. Do not expose hose to direct sunlight for extended lengths of time.
4. Drain hose of liquids and rinse with cold water after vacuuming chemicals.
Wrap the cord around vacuum head when not in use.
Accessories
After extensive use, it may become necessary to replace the brushes in the rug tool and the rubber blades in the universal tool.
Contact your authorized Dustbane Targa vacuum distributor for these parts.
Vacuum Motor Maintenance
The Targa Series motors are among the best available vacuum motos. Provided that the procedures in this manual are followed,
your Targa motor should not require replacement of the brushes before 800 hours of operation. Replacing brushes after ths time
will prolong the life of the motor.
Any other services should be performed by an authorized Dustbane distributor only.
Who to call for assistance
If you work with a Dustbane-authorized distributor, contact them for assistance. If any contents of the box are missing, contact
your Dustbane-authorized dealer, distributor or reseller. Make sure you have the machine’s serial number, located on the back
ofthe machine, when you call.
Filtration Systems
99.973%
82%
80%
HEPA Cartridge Filter
Vacuum Filter
Clean Air Filter Bag
7Parts & Operations Manual Targa Eco Series
Filter Congurations and Maintenance Tips
CONFIGUARTION:
Clean Air “ Filtration (Grey Targa Filter)
INSTALLATION APPLICATIONS TIPS
1. Remove vacuum head from tank.
2. Place Targa lter in tank.
3. Replace vacuum head on tank with the
airow indicator light centered over tank
inlet. Align clamps on the side of tank with
tabs on head and lock clamps.
General dry vacuuming.
(i.e. schools, hotels, oces, etc.)
• To maximize lter life, maintain air quality
and performance, clean lter with soft
brush, shake, or wash in lukewarm water.
• Inspect lter for signs of wear and replace
ifnecessary.
• For best performance, use with a paper dust
bag installed.
CONFIGUARTION:
Superior Clean Air” Filtration (Grey Targa Filter + Paper Dust Bag)
INSTALLATION APPLICATIONS TIPS
1. Remove vacuum head from tank.
2. Unfold dust bag, gently seperate walls
ofbag, insert into tank (before placing
Targa lter in place).
3. Slide rubberized bag collar over inlet nozzle.
Ensure collar face is against tank wall.
General dry vacuuming with the convenience
of a bag. (i.e. schools, hotels, oces, etc.)
Excellent for ne dust applications where
blinding of lter is a problem. (i.e. chalk dust,
dry wall dust, lampback, silica dust, etc.)
• Ensure collar is on inlet as far as possible
(ifnot, bag may come o).
• Sides of bag should be seperated after
installed in tank to maximize entire bag
volume.
• Grey Targa lter must be in place before
operation.
CONFIGUARTION:
Optimum Clean Air” Filtration (Targa Filter + Paper Dust Bag + HEPA lter)
INSTALLATION APPLICATIONS TIPS
1. Remove vacuum head from tank, setting
the head on the side.
2. Place clamp on outer ring of HEPA (do not
tighten until lter is on black oat cage).
Ultra high ltration vacuuming where air
quality is crucial. (i.e. hospitals, computer
areas, areas where asthmatics and allergy
suerers live and work.)
• To maximize lter life, maintain air quality
and peak performance, the HEPA lter
should only be cleaned with a soft brush
orblown clean with compressed air.
• Never wash or expose HEPA lter to water
asthis will damage lter material.
• Inspect lter for signs of wear and replace
ifnecessary.
• Always use with paper dust bag and
Targalter.
CONFIGUARTION:
Wet Filtration (Targa 990 and Targa XL)
WARNING! REMOVE ALL OTHER FILTERS BEFORE INSTALLING WET FILTER
INSTALLATION APPLICATIONS TIPS
1. Remove vacuum head from tank.
2. Remove any other lters.
3. Empty out contents in vacuum tank (rinse
out with water if possible).
4. Place wet lter in tank ensuring black gasket
is free of dirt and sitting at on tank rim.
5. Replace head and lock clamps.
For removal of liquids from carpets and hard
oors. Ideal when picking up liquids after
stripping and rinsing oors and for removal
ofslush from entrance walk-o mats in winter.
• After vacuuming liquids, clean by
vacuuming a small amount of clean water.
Allow to dry in a ventilated area.
• To minimize foam build-up, use Dustbanes
De-Foam in tank.
• For ease of emptying, ll tank to no more
than 3/4 full.
• Do not use for dry application as this will
result in damage to the motor.
8 Parts & Operations Manual Targa Eco Series
Dustbane Products Ltd., 25 Pickering Pl., Ottawa, ON K1G 5P4
Tel: 1-800-387-8226 Fax: 1-800-363-5309 www.dustbane.ca
Filter Bags
Code: 28501 – Small
28502 – Large
Comes with 10  lters per pack
Dry Filter
Code: 26018VG – Small
26020VG – Large
Tool Kit #1
Code: 28631
For the Enviro Vac, Targa 330
andHip Vac
Eco Carpet Tool 1¼” 29009
Floor Tool 1¼” 28906
Dusting Brush 1¼” 28999
Upholstery Tool 1¼” 28998
Crevice Tool 1¼” 28997
Pistol Grip 1¼” 28994
Collapsible Wand 1¼” 29007
Tool Kit #2
Code: 28631
For the Targa 660
Double Curve (DC)
StyleWand 1½”
28802
Carpet Tool 1½” 28722
Eco Carpet Tool 1½” 29008
Dusting Brush 1¼” 28999
Plastic Reducer 1½-1¼” 29003
Upholstery Tool 1¼” 28998
Crevice Tool 1¼” 28997
Tool Kit #3
Code: 28633
For the Targa 990, XL 12,
XL 12 Dolly, XL 18 Dolly,
XL 18 Tip & Pour and PC-3
Double Curve (DC)
StyleWand 1½”
28802
Universal Floor Tool 1½” 28729
Eco Carpet Tool 1½” 29008
Dusting Brush 1¼” 28999
Plastic Reducer 1½-1¼” 29003
Upholstery Tool 1¼” 28998
Crevice Tool 1¼” 28997
Tool Kit #4
Code: 28634
For the Targa 330 and 660
Carpet Tool 1¼” 28721
Hose Cuff 26114
Double Curve (DC)
StyleWand 1¼”
28780
Power Nozzle
HoseAssembly
Code: 28993
Wet Filter
Code: 26023VG – Large
Front Mount Squeegee
Code: 28829
Compatible with the Dolly Targa
HEPA Cartridge Filter
Code: 26099 – Small
26100 – Large
TOOLS AND ACCESSORIES
Vacuums
Notes
10 Parts & Operations Manual Targa Eco Series
Targa Enviro Vac 28540
Parts / Pièces
Targa Head Enviro Vac (26200-1)
Tank Assembly: Enviro Vac/Targa 330 (26330) Hose Assembly 1¼” X 8’ (28992)
Filters
11Parts & Operations Manual Targa Eco Series
Targa Enviro Vac 28540
Parts / Pièces
Targa Head Enviro Vac (26200-1)
Part N. Description Quantity
04182 FEMALE CONNECTOR 2
04198 PLUG  DOME 1
04349 SPEED CONTROL 1
21830 VAC MOTOR BYPASS 1
20066 MOTOR GASKET 1
26001 SWITCH PLATE 1
26002 SWITCH  2 SPEED 1
26003 POWER OUTLET PLUG 1
26006 MOTOR HOUSING  BLUE 2
26012 FILTER CAGE  SMALL 1
26026 TOP FOAM DISC 1
26027 ACCOUSTIC FOAM  LOWER 8
26032 SCREW  1 X 10/16" PHS 2
26050 POWER CORD  35'/10.7M 1
26147 HOUSING GASKET 2
26038 WIRE ASSEMBLY  BLACK 1
26041 WIRE ASSEMBLY  GROUND 1
26055 MOTOR GASKET  UPPER 1
26117 SCREW #8 X ¾" PHS 12
Tank Assembly: Enviro Vac/Targa 330 (26330)
Part N. Description Quantity
22305 NUT  3/816 ACORN FLANGED 4
22306 CASTER 4
22313 SCREW  #10 X 3/8" PHS 4
26101 INLET AIR DEFLECTOR 1
26102 TANK CLAMP 2
26308 TANK ENVIRO/330  GREEN 1
Hose Assembly 1¼” X 8’ (28992)
Part N. Description Quantity
26104 INLET SWIVEL NUT 1
26111 HOSE 1½" X 8' 1
26114 HOSE CUFF 1½"  1¼" 1
Filters
Part N. Description Quantity
26018VG TARGA FILTER  DRY SMALL 1
26141 JOGGER RING 1
28501 FILTER BAGS  S 10 PK 0.1
12 Parts & Operations Manual Targa Eco Series
Targa 330 28541
Parts / Pièces
Targa Head 330 (26200)
Tank Assembly: Enviro Vac/Targa 330 (26330) Hose Assembly 1¼” X 8’ (28992)
Filters
13Parts & Operations Manual Targa Eco Series
Targa 330 28541
Parts / Pièces
Targa Head Enviro Vac (26200-1)
Part N. Description Quantity
04182 FEMALE CONNECTOR 2
04198 PLUG  DOME 1
20066 MOTOR GASKET 1
21830 VAC MOTOR BY PASS 1
26000 ROCKER SWITCH 1
26001 SWITCH PLATE 1
26003 POWER OUTLET PLUG 1
26006 MOTOR HOUSING  BLUE 2
26012 FILTER CAGE  SMALL 1
26027 ACCOUSTIC FOAM  LOWER 8
26026 TOP FOAM DISC 1
26032 SCREW  1 X 10/16" PHS 2
26035 POWER CORD  35'/10.7M 1
26038 WIRE ASSEMBLY  BLACK 1
26041 WIRE ASSEMBLY  BLACK 1
26055 WIRE ASSEMBLY  GROUND 1
26055 MOTOR GASKET  UPPER 1
26117 SCREW  #8 X ¾" PHS 12
26147 HOUSING GASKET 2
Tank Assembly: Enviro Vac/Targa 330 (26330)
Part N. Description Quantity
22305 NUT  3/816 ACORN FLANGED 4
22306 CASTER 4
22313 SCREW  #10 X 3/8" PHS 4
26101 INLET AIR DEFLECTOR 1
26102 TANK CLAMP 2
26308 TANK ENVIRO/330  GREEN 1
Hose Assembly 1¼” X 8’ (28992)
Part N. Description Quantity
26104 INLET SWIVEL NUT 1
26111 HOSE 1½" X 8' 1
26114 HOSE CUFF 1½"  1¼" 1
Filters
Part N. Description Quantity
26018VG TARGA FILTER  DRY SMALL 1
26141 JOGGER RING 1
28501 FILTER BAGS  S 10 PK 0.1
14 Parts & Operations Manual Targa Eco Series
Targa 660 28542
Parts / Pièces
Targa Head 660 (26201)
Tank Assembly: Targa 660/990 (26331) Hose Assembly 1½” X 8’ (28990)
Filters
15Parts & Operations Manual Targa Eco Series
Targa 660 28542
Parts / Pièces
Targa Head 660 (26201)
Part N. Description Quantity
04182 FEMALE CONNECTOR 2
04198 PLUG  DOME 1
21082 CORD GRIP 1
21715 FAN HOUSING 1
21828 VAC MOTOR 2 STAGE 1
20069 MOTOR GASKET 1
26000 ROCKER SWITCH 1
26001 SWITCH PLATE 1
26003 POWER OUTLET PLUG 1
26006 MOTOR HOUSING  BLUE 2
26013 FILTER CAGE  LARGE 1
26027 ACCOUSTIC FOAM  LOWER 8
26028 ACCOUSTIC FOAMTOP 2
26029 ACCOUSTIC FOAM  SIDE 2
26030 ACCOUSTIC FOAM  UPPER 2
26032 SCREW 1 X 10/16" PHS 2
26038 WIRE ASSEMBLY  BLACK 1
26041 WIRE ASSEMBLY  GROUND 1
26050 POWER CORD 50'/12.3M 1
26055 MOTOR GASKET  UPPER 1
26117 SCREW #8 X ¾" PHS 12
21760 CARBON BRUSH KIT 1
Tank Assembly: Targa 660/990 (26331)
Part N. Description Quantity
22305 NUT 3/816 ACORN FLANGED 5
22306 CASTER 5
22313 SCREW #10 X 3/8" PHS 4
26101 INLET AIR DEFLECTOR 1
26102 TANK CLAMP 2
26309 TANK 660 /990  GREEN 1
Hose Assembly 1½” X 8’ (28990)
Part N. Description Quantity
26104 INLET SWIVEL NUT 1
26111 HOSE 1½" X 8' 1
26113 HOSE CUFF 1½" 1
Filters
Part N. Description Quantity
26020VG TARGA FILTER  DRY LARGE 1
26141 JOGGER RING 1
28502 FILTER BAGS  LG 10 PK 0.1
16 Parts & Operations Manual Targa Eco Series
Targa 990 28543
Parts / Pièces
Targa Head 990/XL 12/XL 18 (26202)
Tank Assembly: Targa 660/990 (26331) Hose Assembly 1½” X 8’ (28990)
Filters
17Parts & Operations Manual Targa Eco Series
Targa 990 28543
Parts / Pièces
Targa Head 990/XL 12/XL 18 (26202)
Part N. Description Quantity
04182 FEMALE CONNECTOR 2
04198 PLUG  DOME 1
20066 MOTOR GASKET  LOWER 1
21830 VAC MOTOR  BIPASS 1
26000 ROCKER SWITCH 1
26001 SWITCH PLATE 1
26003 POWER OUTLET PLUG 1
26006 MOTOR HOUSING  BLUE 2
26013 FILTER CAGE  LARGE 1
26014 FLOAT SHUT OFF 1
26026 TOP FOAM DISC 1
26027 ACCOUSTIC FOAM  LOWER 8
26032 SCREW  1 X 10/16" PHS 2
26038 WIRE ASSEMBLY  BLACK 1
26041 WIRE ASSEMBLY  GROUND 1
26050 POWER CORD  50'/15.24M 1
26055 MOTOR GASKET  UPPER 1
26117 SCREW  #8 X ¾" PHS 12
26147 HOUSING GASKET 2
Tank Assembly: Targa 660/990 (26331)
Part N. Description Quantity
22305 NUT 3/816 ACORN FLANGED 5
22306 CASTER 5
22313 SCREW #10 X 3/8" PHS 4
26101 INLET AIR DEFLECTOR 1
26102 TANK CLAMP 2
26309 TANK 660/990  GREEN 1
Hose Assembly 1½” X 8’ (28990)
Part N. Description Quantity
26104 INLET SWIVEL NUT 1
26111 HOSE 1½" X 8' 1
26113 HOSE CUFF 1½" 1
Filters
Part N. Description Quantity
26020VG TARGA FILTER  DRY LARGE 1
26023VG TARGA FILTER  WET LARGE 1
26141 JOGGER RING 1
28502 FILTER BAGS  LG 10 PK 0.1
18 Parts & Operations Manual Targa Eco Series
Targa XL 12 28544
Parts / Pièces
Tank Assembly XL 12 (26332) Hose Assembly 1½” X 10’ (29006)
Filters
Targa Head 990/XL 12/XL 18 (26202)
19Parts & Operations Manual Targa Eco Series
Targa XL 12 28544
Parts / Pièces
Targa Head 990/XL 12/XL 18 (26202)
Part N. Description Quantity
04182 FEMALE CONNECTOR 2
04198 PLUG  DOME 1
20066 MOTOR GASKET  LOWER 1
21830 VAC MOTOR  BIPASS 1
26000 ROCKER SWITCH 1
26001 SWITCH PLATE 1
26003 POWER OUTLET PLUG 1
26006 MOTOR HOUSING  BLUE 2
26013 FILTER CAGE  LARGE 1
26014 FLOAT SHUT OFF 1
26026 TOP FOAM DISC 1
26027 ACCOUSTIC FOAM  LOWER 8
26032 SCREW  1 X 10/16" PHS 2
26038 WIRE ASSEMBLY  BLACK 1
26041 WIRE ASSEMBLY  GROUND 1
26050 POWER CORD  50'/15.24M 1
26055 MOTOR GASKET  UPPER 1
26117 SCREW  #8 X ¾" PHS 12
26147 HOUSING GASKET 2
Tank Assembly: Targa 660/990 (26331)
Part N. Description Quantity
22305 NUT  3/816 ACORN FLANGED 5
22306 CASTER 5
22313 SCREW  #10 X 3/8" PHS 4
26101 INLET AIR DEFLECTOR 1
26102 TANK CLAMP 2
26232 DRAIN PLUG ASSEMBLY 1
26310 TANK XL 12  GREEN 1
Hose Assembly 1½” X 10’ (29006)
Part N. Description Quantity
26104 Inlet Swivel Nut 1
26227 Hose 1½" X 10' 1
26113 Hose Cu 1 ½" 1
Filters
Part N. Description Quantity
26020VG TARGA FILTER  DRY LARGE 1
26023VG TARGA FILTER  WET LARGE 1
26141 JOGGER RING 1
28502 FILTER BAGS  LG 10 PK 0.1
20 Parts & Operations Manual Targa Eco Series
Targa XL 12 Dolly 28545
Parts / Pièces
Dolly Assembly XL12/XL18/PC3 (26260)
Tank & Dolly Assembly XL 12 Dolly (26334)
Tank Assembly XL 12 Dolly (26194)
Hose Assembly 1½” X 10’ (29006)
Filters
Targa Head 990/XL 12/XL 18 (26202)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Dustbane Targa Series Operations Manual

Catégorie
Aspirateurs
Taper
Operations Manual

dans d''autres langues