JVC DLA-HD550 Manuel utilisateur

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

0809TTH-AO-AO

DLA-HD550

D-ILA PROJECTOR

PROYECTOR D-ILA

PROJECTEUR D-ILA

FOR SERVICING(Only in U.S.A)

TO OUR VALUED CUSTOMER

THANK YOU FOR PURCHASING THIS JVC PRODUCT.

WE WANT TO HELP YOU ACHINEVE A PERFECT EXPERINCE.

NEED HELP ON HOW TO HOOK UP?

NEED ASSISTANCE ON HOW TO OPERATE?

NEED TO LOCATE A JVC SERVICE CENTER?

LIKE TO PURCHACE ACCESSORIES?

IS HERE TO HELP!

TOLL FREE: 1(800)252-5722

http://www.jvc.com

Remember to retain your Bill of Sale for Warranty Service.

DO not attempt to service the product yourself

Caution

To prevent electrical shock,do not open the cabinet.

There are no user serviceable parts inside.

Please refer to qualified service personnel for repairs.

DLA-HD550

For Customer use :

Enter below the serial No. which is

located on the side of the cabinet.

Retain this information for future

reference.

Model No. DLA-HD550

Serial No.

Instrucción para el cliente :

Introduzca a continuación el nº de

serie que aparece en la parte

inferior lateral de la caja. Conserve

esta información como referencia

para uso ulterior.

Modelo Nº DLA-HD550

Nº de serie

Pour utilisation par le client :

Entrer ci-dessous le N° de série qui

est situé sous le boîtier. Garder

cette information comme référence

pour le futur.

N° de modèle DLA-HD550

N° de série

DLA-HD550

D-ILA PROJECTOR

INSTRUCTIONS

ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO

PROJECTEUR D-ILA

MANUEL D’INSTRUCTIONS

PROYECTOR D-ILA

MANUAL DE INSTRUCCIONES

PC007280999-1

1

Getting started

2

Safety Precautions

IMPORTANT INFORMATION

About the installation place

Do not install the projector in a place that cannot support

its weight securely.

If the installation place is not sturdy enough, the projector

could fall or overturn, possibly causing personal injury.

IMPORTANT SAFEGUARDS

Electrical energy can perform many useful functions. This

unit has been engineered and manufactured to assure your

personal safety. But IMPROPER USE CAN RESULT IN

POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In

order not to defeat the safeguards incorporated into this

product, observe the following basic rules for its installation,

use and service. Please read these Important Safeguards

carefully before use.

- All the safety and operating instructions should be read

before the product is operated.

- The safety and operating instructions should be retained

for future reference.

- All warnings on the product and in the operating instructions

should be adhered to.

- All operating instructions should be followed.

- Place the projector near a wall outlet where the plug can

be easily unplugged.

- Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

- Do not use attachments not recommended by the product

manufacturer as they may be hazardous.

- Do not use this product near water. Do not use immediately

after moving from a low temperature to high temperature,

as this causes condensation, which may result in fire,

electric shock, or other hazards.

- Do not place this product on an unstable cart, stand, or

table. The product may fall, causing serious injury to a

child or adult, and serious damage to the product. The

product should be mounted according to the manufacturer’s

instructions, and should use a mount recommended by

the manufacturer.

- When the product is used on a cart, care

should be taken to avoid quick stops,

excessive force, and uneven surfaces

which may cause the product and cart to

overturn, damaging equipment or causing

possible injury to the operator.

- Slots and openings in the cabinet are

provided for ventilation. These ensure reliable operation of

the product and protect it from overheating. These openings

must not be blocked or covered. (The openings should

never be blocked by placing the product on bed, sofa, rug,

or similar surface. It should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been

adhered to.)

This product has a High Intensity

Discharge (HID) lamp that contains

mercur

y.

Disposal of these materials may be

regulated in your community due to

environmental considerations. For

disposal or recycling information, please

contact your local authorities or for USA,

the Electronic Industries Alliance:

http://www.eiae.org.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING:

THIS APPARATUS MUST BE EARTHED.

CAUTION:

To reduce the risk of electric shock, do not remove cover.

Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding

type plug to satisfy FCC rule. If you are unable to insert

the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION:

Changes or modification not approved by JVC could

void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply

with the limits for Class B digital devices, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is encourage

to try to correct the interference by one or more of the

following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and

receiver.

● Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician

for help.

MACHINE NOISE INFORMATION (Germany only)

Changes Machine Noise Information Ordinance 3. GSGV,

January 18, 1991: The sound pressure level at the operator

position is equal or less than 20 dB (A) according to

ISO 7779.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

-

To allow better heat dissipation, keep a clearance between

this unit and its surrounding as shown below. When this

unit is enclosed in a space of dimensions as shown below,

use an air-conditioner so that the internal and external

temperatures are the same. Overheating can cause

damage.

-

the type of power supply to your home, consult your

product dealer or local power company.

- This product is equipped with a three-wire plug. This plug

will fit only into a grounded power outlet. If you are unable

to insert the plug into the outlet, contact your electrician to

install the proper outlet. Do not defeat the safety purpose

of the grounded plug.

- Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords at doors,

plugs, receptacles, and the point where they exit from the

product.

- For added protection of this product during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and

disconnect the cable system. This will prevent damage to

the product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as this can

result in a risk of fire or electric shock.

- Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening

or removing covers may expose you to dangerous

voltages and other hazards. Refer all service to qualified

service personnel.

-

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the Operation Manual, as an improper adjustment

of controls may result in damage and will often require

extensive work by a qualified technician to restore the product

to normal operation.

e) If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer or with same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

-

Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

- The product should be placed more than one foot away

from heat sources such as radiators, heat registers,

stoves, and other products (including amplifiers) that

produce heat.

- When connecting other products such as VCR’s, and DVD

players, y

ou should turn off the power of this product for

protection against electric shock.

- Do not place combustibles behind the cooling fan. For

example, cloth, paper, matches, aerosol cans or gas

lighters that present special hazards when over heated.

- Do not look into the projection lens while the illumination

lamp is turned on. Exposure of your eyes to the strong

light can result in impaired eyesight.

- Do not look into the inside of this unit through vents

(ventilation holes), etc. Do not look at the illumination lamp

directly by opening the cabinet while the illumination lamp

is turned on. The illumination lamp also contains ultraviolet

rays and the light is so powerful that your eyesight can be

impaired.

- Do not drop, hit, or damage the light-source lamp (lamp

unit) in any way. It may cause the light-source lamp to

break and lead to injuries. Do not use a damaged light

source lamp. If the light-source lamp is broken, ask your

dealer to repair it. Fragments from a broken light-source

lamp may cause injuries.

- The light-source lamp used in this projector is a high

pressure mercury lamp. Be careful when disposing of the

light-source lamp. If anything is unclear, please consult

your dealer.

- Do not ceiling-mount the projector to a place which tends

to vibrate; otherwise, the attaching fixture of the projector

could be broken by the vibration, possibly causing it to fall

or overturn, which could lead to personal injury.

- Use only the accessory cord designed for this product to

prevent shock.

*DO NOT allow any unqualified person to install the

unit.

Be sure to ask your dealer to install the unit (e.g.

attaching it to the ceiling) since special technical

knowledge and skills are required for installation. If

installation is performed by an unqualified person, it

may cause personal injury or electrical shock.

power source indicated on the label. If you are not sure of

150 mm

and above

150 mm and above

300 mm

and above

200 mm

and above

300 mm

and above

Safety Precautions

ENGLISH

3

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

-

To allow better heat dissipation, keep a clearance between

this unit and its surrounding as shown below. When this

unit is enclosed in a space of dimensions as shown below,

use an air-conditioner so that the internal and external

temperatures are the same. Overheating can cause

damage.

-

the type of power supply to your home, consult your

product dealer or local power company.

- This product is equipped with a three-wire plug. This plug

will fit only into a grounded power outlet. If you are unable

to insert the plug into the outlet, contact your electrician to

install the proper outlet. Do not defeat the safety purpose

of the grounded plug.

- Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords at doors,

plugs, receptacles, and the point where they exit from the

product.

- For added protection of this product during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and

disconnect the cable system. This will prevent damage to

the product due to lightning and power line surges.

- Do not overload wall outlets, extension cords, or

convenience receptacles on other equipment as this can

result in a risk of fire or electric shock.

- Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or

short out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

- Do not attempt to service this product yourself as opening

or removing covers may expose you to dangerous

voltages and other hazards. Refer all service to qualified

service personnel.

-

Unplug this product from the wall outlet and refer service to

qualified service personnel under the following conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the Operation Manual, as an improper adjustment

of controls may result in damage and will often require

extensive work by a qualified technician to restore the product

to normal operation.

e) If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in performance -

this indicates a need for service.

- When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer or with same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

-

Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

- The product should be placed more than one foot away

from heat sources such as radiators, heat registers,

stoves, and other products (including amplifiers) that

produce heat.

- When connecting other products such as VCR’s, and DVD

players, y

ou should turn off the power of this product for

protection against electric shock.

- Do not place combustibles behind the cooling fan. For

example, cloth, paper, matches, aerosol cans or gas

lighters that present special hazards when over heated.

- Do not look into the projection lens while the illumination

lamp is turned on. Exposure of your eyes to the strong

light can result in impaired eyesight.

- Do not look into the inside of this unit through vents

(ventilation holes), etc. Do not look at the illumination lamp

directly by opening the cabinet while the illumination lamp

is turned on. The illumination lamp also contains ultraviolet

rays and the light is so powerful that your eyesight can be

impaired.

- Do not drop, hit, or damage the light-source lamp (lamp

unit) in any way. It may cause the light-source lamp to

break and lead to injuries. Do not use a damaged light

source lamp. If the light-source lamp is broken, ask your

dealer to repair it. Fragments from a broken light-source

lamp may cause injuries.

- The light-source lamp used in this projector is a high

pressure mercury lamp. Be careful when disposing of the

light-source lamp. If anything is unclear, please consult

your dealer.

- Do not ceiling-mount the projector to a place which tends

to vibrate; otherwise, the attaching fixture of the projector

could be broken by the vibration, possibly causing it to fall

or overturn, which could lead to personal injury.

- Use only the accessory cord designed for this product to

prevent shock.

*DO NOT allow any unqualified person to install the

unit.

Be sure to ask your dealer to install the unit (e.g.

attaching it to the ceiling) since special technical

knowledge and skills are required for installation. If

installation is performed by an unqualified person, it

may cause personal injury or electrical shock.

power source indicated on the label. If you are not sure of

150 mm

and above

150 mm and above

300 mm

and above

200 mm

and above

300 mm

and above

1

Getting started

4

Safety Precautions (Continued)

POWER CONNECTION

WARNING:

Do not cut off the main plug from this equipment.

If the plug fitted is not suitable for the power points in

your home or the cable is too short to reach a power

point, then obtain an appropriate safety approved

extension lead or adapter or consult your dealer.

If nonetheless the mains plug is cut off, dispose of the

plug immediately, to avoid a possible shock hazard by

inadvertent connection to the main supply. If a new main

plug has to be fitted, then follow the instruction given

below.

WARNING:

THIS APPARATUS MUST BE EARTHED.

For USA and Canada only

Use only the following power cord.

Power cord

The power supply voltage rating of this product is

AC110V – AC240V. Use only the power cord designated

by our dealer to ensure Safety and EMC.

Ensure that the power cable used for the projector is the

correct type for the AC outlet in your country. Consult

your product dealer.

Power cord

For United Kingdom For European continent

countries

IMPORTANT (Europe only):

The wires in the mains lead on this product are colored

in accordance with the following cord:

Green-and-yellow : Earth

Blue : Neutral

Brown : Live

As these colors may not correspond with the colored

making identifying the terminals in your plug, proceed

as follows:

The wire which is colored green-and-yellow must be

connected to the terminal which is marked M with the

letter E or the safety earth or colored green or green-

and-yellow.

The wire which is colored blue must be connected to

the terminal which is marked with the letter N or colored

black.

The wire which is colored brown must be connected to

the terminal which is marked with the letter L or colored

red.

POWER CONNECTION

(United Kingdom only)

HOW TO REPLACE THE FUSE:

When replacing the fuse, be sure to use only a correctly

rated approved type, re-fit the fuse cover.

IF IN DOUBT —— CONSULT A COMPETENT ELECTRICIAN.

Open the fuse compartment with the blade screwdriver,

and replace the fuse.

(* An example is shown in the illustration below.)

Fuse

ENGLISH

5

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic

compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is:

JVC Technical Services Europe GmbH

Postfach 10 05 04

61145 Friedberg

Germany

1

Getting started

6

ENGLISH

Information for Users on Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of

as general household waste. If you want to dispose of the product or battery, please

consider the collection systems or facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates that this battery

contains lead.

DEUTSCH

Benutzerinformationen zur Entsorgung alter Geräte und Batterien

[Nur Europäische Union]

Diese Symbole zeigen an, dass derartig gekennzeichnete Geräte nicht als normaler

Haushaltsabfall entsorgt werden dürfen. Wenden Sie sich zur Entsorgung des Produkts

oder der Batterie an die hierfür vorgesehenen Sammelstellen oder Einrichtungen, damit

eine fachgerechte Wiederverwertung möglich ist.

Hinweis: Das Zeichen Pb unterhalb des Batteriesymbols gibt an, dass diese Batterie

Blei enthält.

FRANÇAIS

Informations relatives à l’élimination des appareils et des piles usagés, à l’intention des utilisateurs

[Union européenne seulement]

Si ces symboles figurent sur les produits, cela signifie qu’ils ne doivent pas être jetés

comme déchets ménagers. Si vous voulez jeter ce produit ou cette pile, veuillez

considérer le système de collection de déchets ou les centres de recyclage appropriés.

Notification: La marque Pb en dessous du symbole des piles indique que cette pile

contient du plomb.

NEDERLANDS

Informatie voor gebruikers over het verwijderen van oude apparatuur en batterijen

[Alleen Europese Unie]

Deze symbolen geven aan dat apparatuur met dit symbool niet mag worden

weggegooid als algemeen huishoudelijk afval. Als u het product of de batterij wilt

weggooien, kunt u inzamelsystemen of faciliteiten voor een geschikte recycling

gebruiken.

Opmerking: Het teken Pb onder het batterijsymbool geeft aan dat deze batterij lood

bevat.

Products

Battery

Produkte

Batterie

Produits

Pile

Producten

Batterij

ENGLISH

7

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

ESPAÑOL / CASTELLANO

Información para los usuarios sobre la eliminación de baterías/pilas usadas

[Sólo Unión Europea]

Estos símbolos indican que el equipo con estos símbolos no debe desecharse con la

basura doméstica. Si desea desechar el producto o batería/pila, acuda a los sistemas

o centros de recogida para que los reciclen debidamente.

Atención: La indicación Pb debajo del símbolo de batería/pila indica que ésta contiene

plomo.

ITALIANO

Informazioni per gli utenti sullo smaltimento delle apparecchiature e batterie obsolete

[Solo per l’Unione Europea]

Questi simboli indicano che le apparecchiature a cui sono relativi non devono essere

smaltite tra i rifiuti domestici generici. Se si desidera smaltire questo prodotto o questa

batteria, prendere in considerazione i sistemi o le strutture di raccolta appropriati per il

riciclaggio corretto.

Nota: Il simbolo Pb sotto il simbolo delle batterie indica che questa batteria contiene

piombo.

PORTUGUÊS

Informação para os utilizadores acerca da eliminação de equipamento usado e pilhas

[Apenas União Europeia]

Estes símbolos indicam que o equipamento com estes símbolos não deve ser eliminado

juntamente com o restante lixo doméstico. Se pretende eliminar o produto ou a pilha,

utilize os sistemas de recolha ou instalações para uma reciclagem apropriada.

Aviso: O sinal Pb abaixo do símbolo para pilhas indica que esta pilha contém chumbo.

ΕΛΛΗΝΙΚΑ

Πληροφορίες για την απόρριψη παλαιού εξοπλισμού και μπαταριών

[ Ευρωπαϊκή Ένωση μόνο ]

Αυτά τα σύμβολα υποδηλώνουν ότι ο εξοπλισμός που τα φέρει δεν θα πρέπει να

απορριφθεί ως κοινό οικιακό απόρριμμα . Εάν επιθυμείτε την απόρριψη αυτού του

προϊόντος ή αυτής της μπαταρίας , χρησιμοποιήστε το σύστημα περισυλλογής ή

εγκαταστάσεις για ανάλογη ανακύκλωση .

Σημείωση : Το σύμβολο Pb κάτω από το σύμβολο μπαταρίας υποδηλώνει ότι η

μπαταρία περιέχει μόλυβδο .

Productos

Baterías/pilas

Prodotti

Batteria

Produtos

Pilha

Προϊόντα

Μπαταρία

1

Getting started

8

DANSK

Brugerinformation om bortskaffelse af gammelt udstyr og batterier

[Kun EU]

Disse symboler angiver, at udstyr med disse symboler ikke må bortskaffes som

almindeligt husholdningsaffald. Hvis du ønsker at smide dette produkt eller batteri ud,

bedes du overveje at bruge indsamlingssystemet eller steder, hvor der kan ske korrekt

genbrug.

Bemærk: Tegnet Pb under symbolet for batterierne angiver, at dette batteri indeholder

bly.

SUOMI

Tietoja vanhojen laitteiden ja akkujen hävittämisestä

[Vain Euroopan unioni]

Nämä symbolit ilmaisevat, että symboleilla merkittyä laitetta ei tulisi hävittää tavallisen

kotitalousjätteen mukana. Jos haluat hävittää tuotteen tai sen akun, tee se hyödyntämällä

akkujen keräyspisteitä tai muita kierrätyspaikkoja.

Huomautus: Akkusymbolin alapuolella oleva Pb-merkintä tarkoittaa, että akku sisältää

lyijyä.

SVENSKA

Information för användare gällande bortskaffning av gammal utrustning och batterier

[Endast den Europeiska unionen]

Dessa symboler indikerar att utrustning med dessa symboler inte ska hanteras som

vanligt hushållsavfall. Om du vill bortskaffa produkten eller batteriet ska du använda

uppsamlingssystem eller inrättningar för lämplig återvinning.

Observera! Märkningen Pb under symbolen för batterier indikerar att detta batteri

innehåller bly.

NORSK

Opplysninger til brukere om kassering av gammelt utstyr og batterier

[Bare EU]

Disse symbolene viser at utstyr med dette symbolet, ikke skal kastes sammen med

vanlig husholdningsavfall. Hvis du vil kassere dette produktet eller batteriet, skal du

vurdere å bruke innsamlingssystemene eller andre muligheter for riktig gjenbruk.

Merk: Tegnet Pb under symbolet for batterier, viser at batteriet inneholder bly.

Produkter

Batteri

Tuotteet

Akku

Produkter

Batteri

Produkter

Batteri

ENGLISH

9

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

РУССКИЙ

Сведения для пользователей по утилизации старого оборудования и батарей

[только для Европейского союза]

Данные символы указывают на то, что оборудование, на которое они нанесены,

не должны утилизироваться, как обычные бытовые отходы. При необходимости

утилизировать такое изделие или батарею обратитесь в специальный пункт

сбора для их надлежащей переработки.

Уведомление: Надпись Pb под символом батарей указывает на то, что данная

батарея содержит свинец.

ČESKY

Informace pro uživatele k likvidaci starého zařízení a baterií

[Pouze Evropská unie]

Tyto symboly označují, že produkty s těmito symboly se nesmí likvidovat jako běžný

odpad. Pokud chcete produkt nebo baterii zlikvidovat, využijte sběrný systém nebo

jiné zařízení, které zajistí řádnou recyklaci.

Upozornění: Značka Pb pod symbolem pro baterie znamená, že tato baterie

obsahuje olovo.

POLSKI

Informacje dla użytkowników dotyczące pozbywania się zużytego sprzętu i baterii

[Tylko kraje Unii Europejskiej]

Te symbole oznaczają, że sprzętu nie należy wyrzucać razem z odpadami

gospodarczymi. Jeśli trzeba pozbyć się tego produktu lub ba terii, proszę skorzystać

z systemu odbioru lub urządzeń do zbiórki odpadów elektronicznych, w celu

odpowiedniego ponownego ich przetworzenia.

Uwaga: Oznaczenie Pb, znajdujące się pod symbolem baterii wskazuje, że ta bateria

zawiera ołów.

MAGYAR

Felhasználói információ az elhasznált berendezések és akkumulátorok elhelyezéséről

[Csak az Európai Unióban]

Ez a szimbólum azt jelzi, hogy a berendezés nem helyezhető az általános háztartási

hulladék közé. Ha meg szeretne szabadulni a terméktől vagy az akkumulátortól, akkor

legyen tekintettel az gyűjtő rendszerre vagy intézményekre a megfelelő hasznosítás

érdekében.

Megjegyzés: Az alábbi Pb szimbólum - ha az akkumulátoron megtalálható - azt jelzi,

hogy az akkumulátor ólmot tartalmaz.

Изделия

Батарея

Produkty

Baterie

Produkty

Bateria

Termékek

Akkumulátor

1

Getting started

10

Contents

Getting started

Safety Precautions.............................................2

Contents...........................................................10

How to Read this Manual/Accessories/

Optional Accessories.......................................11

About this Manual................................................11

Check the Accessories.......................................11

Optional Accessories..........................................11

Controls and features.............................................12

How to Use the Remote control ......................15

Loading Batteries..................................................15

Effective Range of Remote Control Unit...........15

Preparation

Selecting Connecting Devices....................16

Connecting......................................................17

Connecting via Video Cable and S-Video

Cable................................................................17

Connecting via Component Video Cable........17

Connecting via HDMI Cable..............................18

Connecting via HDMI-DVI Conversion Cable...18

Connecting via SCART-RCA Cable....................19

Connecting via RGB Video Cable......................19

Installing the Projector and Screen.................20

Set Angle..................................................................20

Shif ........................................................................ 20

Screen Size and Projection Distance .............21

Basic Operation

Projecting Image..............................................22

Convenient Features during Projection...........24

Setting the Screen Size........................................24

Masking the Surrounding Area of an Image......24

Settings

The structure of the Settings menu ............... 26

Setting Menu ................................................. 28

Procedures for Menu Operation......................28

Setting Menu......................................................29

Customizing Projected Images .................. 40

Changing the Initial Setting of Picture Mode .40

Registering User-dened Picture Mode...........41

Registering User-dened Picture Mode from the

Menu...................................................................41

Troubleshooting

Troubleshooting ..............................................42

What to Do When these Messages

Are Displayed ................................................ 44

About Warning Indicators

............................

45

Actions to Be Taken for Warning Mode...........45

Replacing the Lamp .......................................46

Procedure for Lamp Replacement.................46

Resetting Lamp Time.........................................48

Cleaning and Replacing the Filter ................49

Others

RS-232C Interface ......................................... 50

RS-232C Specications.......................................50

Command Format..............................................50

RS-232C Communication Examples................53

Copyright and Caution ................................54

About Trademarks and Copyright....................54

　 Caution.................................................................54

Mounting this Unit..............................................55

Specications ............................................ 56

Dimensions..........................................................57

Index ....................................................58

ENGLISH

11

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

How to Read this Manual/

Accessories/Optional Accessories

This manual mainly describes the operating method using the remote control.

● Buttons on the remote control are described as [Button Name].

● Items on the menu are described as “Selection Item”.

■

Conventions in this manual

Buttons to be used are colored in a darker

shade.

● Instruction manual, warranty card and other printed material are also included.

Optional Accessories

Please check with your authorized dealer for details.

● Replacement Lamp: BHL5010-S (Lamp Unit)

● Replacement Filter (black in appearance): PB006560999 (Inner Filter)

Replacement Filter (white in appearance): PB006575099 (Inner Filter)

About this Manual

Describes the limitations of the functions or usage.

Indicates good-to-know information.

Describes operational precautions.

P11 Indicates relevant pages for reference.

BACK

TEST

LIGHT

ASPECT

HIDE

INFO

HDMI 1

VIDEO

HDMI 2

S-VIDEO

COMP.

LENS

MENU

CINEMA

3

CINEMA

1

NATURAL

STAGE DYNAMIC

CINEMA

2

INPUT

PICTURE MODE

Check the Accessories

Remote Control ..................................... 1 piece

AAA size Batteries (for operation conrm) ............... 2 pieces

Power Cord For the US market (2 m) ................... 1 piece

Power Cord For the EU market (2 m) ................... 1 piece

Power Cord For the UK market (2 m) ................... 1 piece

1

Getting started

12

■

Front Side/Left Side

■

Rear Side/Top Side/Right Side

Controls and features

To connect the power cord (

P22

)

Remote Sensor (

P15

)

Lamp Cover (

P46

)

Exhaust Vent

Remote Sensor

(

P15

)

Air Inlet

Lens Cover (opened)

(

P22

)

Lens Cover

(closed)

CAUTION

●

Do not place your fingers in the gap at the lens

during lens shift adjustment. This may cause injuries

if your ngers are caught in between the gap.

(

P23

)

●

Do not let your ngers or other objects get caught in

between the lens cover while closing the cover. This

can cause injuries or malfunction.

ENGLISH

13

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

■

Bottom Surface

Feet: The height (0 to 5 mm) can be adjusted by turning the foot.

Air inlets

Air inlets/Filter (

P49

)

Light on (Red): Warning mode

(

P45

)

Light on/Blinking (Orange):

Lamp warning

(

P45

)

Light on (Red):

Standby mode

Light on (Green):

During projection

Blinking (Green):

Image is temporarily hidden

(

P23

)

Blinking (Red):

Cool Down mode

(

P23

)

To turn on/off the power

To switch input (

P22

)

To hide the image temporarily

(

P23

)

Right button

Left button

Down button

To display the menu

(

P28

)

To return to the previous menu

Up button

WARNING

LAMP

STANDBY/ON

INPUT

HIDE

MENU

BACK

OK

Manual button for lens cover:

Press and hold the button to open the lens cover.

As this is used for maintenance, it is not necessary to

use it at normal times. (

P54

)

CAUTION

●

Do not close lens cover when projecting. Otherwise

it will cause malfunction

,

heat and re.

1

Getting started

14

Controls and features (continued)

■

Remote Control

To turn on the power

To turn off the power

To set the screen size (

P24

)

To control lens (

P22

)

To set gamma (

P40

)

To display test pattern

To display/close the menu

(

P28

)

To return to the previous menu

BACK

TEST

LIGHT

ASPECT

HIDE

INFO

HDMI 1

VIDEO

HDMI 2

S-VIDEO

COMP.

LENS

STAND BY

MENU

CINEMA

3

MENU

POSITION

CINEMA

1

NATURAL

STAGE

DYNAMIC

USER1

GAMMA

C.TEMP

USER2

LENS.

AP.

PIC.

ADJ.

CINEMA

2

INPUT

PICTURE MODE

ON

To select input mode (

P22

)

To adjust color temperature (

P40

)

To hide the image temporarily (

P23

)

To switch picture mode (

P40

)

To display information (

P39

)

Lens Aperture (

P40

)

To select or conrm

To illuminate buttons on the remote control

for 7 seconds

To change the menu position sequentially.

To switch sequentially between Contrast,

Brightness, Color, Tint, Sharpness and

Detail enhance.

ENGLISH

15

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

How to Use the Remote control

● If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out.

When this happens, replace the batteries. Insert the batteries according to the

marks.

● Be sure to insert the end rst.

● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again

and operate the remote control.

Effective Range of Remote Control Unit

■

When directing the remote control

toward this unit

● When aiming the remote control towards the

remote sensor on this unit, ensure that the

distance to the sensor in front or at the rear of

this unit is within 7 m.

● If the remote control fails to work properly,

move closer to this unit.

■

When reecting off a screen

● Ensure that the total of distance A between

this unit and screen and distance B between

remote control and screen is within 7 m.

● As the efciency of signals reected from the

remote control unit differ with the type of

screen used, operable distance may decrease.

30°

20°

30°

20°

A

B

Loading Batteries

This unit

Screen

Remote control

This unit

1

2 3

2

Preparation

16

Selecting Connecting Devices

● Do not turn on the power until connection is complete.

● The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be

connected.

● This device is used for image projection. Connect to an audio output device such as amplier and speaker for audio output

from the connected device.

● The images may not be displayed depending on the devices and cables to be connected.

For HDMI cable (sold separately), only use one that is HDMI-approved.

● It may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be

connected.

CB/PB

CR/PR

HDMI 1

HDMI 2

Y

SYNC

S-VIDEO

VIDEO

RS-232C

R B G

To connect via HDMI terminal (

P18

)

To connect RS-232C terminal

(external control) (

P50

)

To connect via component video terminals (

P17

)

To connect via video terminal (

P17

)

To connect via S-video terminal (

P17

)

BD/DVD Player

PC

VCR and camcorder

BD/DVD Recorder

ENGLISH

17

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

Connecting

Connecting via Component Video Cable

●

Set “COMP.” in the setting menu to “Y Pb/Cb Pr/Cr”. ( P33 -

12

)

Connecting via Video Cable and S-Video Cable

HDMI 1

HDMI 2

VIDEO

S-VIDEO

Y

R

CB/PB

CR/PR

SYNC

BG

RS-232C

This unit

To component video input terminals

Component video cable

(sold separately)

BD/DVD player

C

R

/P

R

(red)

C

B

/P

B

(blue)

Y (green)

Component video output

terminals

HDMI 1

HDMI 2

VIDEO

S-VIDEO

Y

R B G

SYNC

CB/PB

C

R

/P

R

This unit

To video input termina

l

To S-video input terminal

S-video cable

(sold separately)

video cable

(sold separately)

Video output

S-video output

VCR and camcorder

2

Preparation

18

Connecting via HDMI Cable

Connecting via HDMI-DVI Conversion Cable

HDMI 1

HDMI 2

VIDEO

S-VIDEO

Y

R

SYNC

C

B

/P

B

CR/PR

B G

This unit

HDMI cable (sold separately)

To HDMI 1 or HDMI 2 input terminal

HDMI output terminal

BD/DVD recorder

HDMI 1

HDMI 2

VIDEO

S-VIDEO RS-232C

Y

R

SYNC

CB/PB

CR/PR

B G

This unit

To HDMI 1 or HDMI 2 input terminal

HDMI-DVI conversion cable

(sold separately)

Desktop computer

DVI output terminal

Connecting(Continued)

Notebook PC

● If noise is produced, take PCs (Desktop computer) away from this unit.

● Reducing the length of the cable is recommended if there is no picture.

● If noise is produced, take PCs (Notebook PC) away from this unit.

● Use only HDMI-approved equipment.

● Reducing the length of the cable is recommended if there is no picture.

ENGLISH

19

Getting Started

Preparation

Basic Operation

Troubleshooting

Settings

Others

Connecting via SCART-RCA Cable

● Set “COMP.” in the setting menu to “SCART”.( P33 -

12

)

Connecting via RGB Video Cable

● Set “COMP.” in the setting menu to “RGB”.( P33 -

12

)

● For information on compatible input signals, see “Specications”. ( P56)

HDMI 1 HDMI 2

S-VIDEO

RS-232C

Y

R

VIDEO

SYNC

CB/PB

CR/PR

BG

This unit

To RGB video input terminals

RGB video cable

(sold separately)

R(Red)

B(Blue)

G(Green)

(Includes sync signals)

RGB video output terminals

Device equipped with RGB output

HDMI 1 HDMI 2

VIDEO

S-VIDEO

RS-232C

Y

R

SYNC

CB/PB

CR/PR

B

G

This unit

BD/DVD player for European market

SCART terminal

SCART-RCA cable

(sold separately)

To RGB video and

sync signal input terminals

2

Preparation

20

Installing the Projector and Screen

While installing, please place this unit and the screen perpendicular to each other. Failing to do so may

increase trapezoidal distortion. Please refer to “Keystone”. ( P36 -

24

)

Set Angle

● The angle range which can be set for this unit is ±10°.

● Malfunctions may occur if the angle is not set within the above-mentioned range.

Shift

■

Left/Right position

* 0% up/down position (center)

■

Up/Down position

■

Shifting range of projected image

* 0% left/right position (center)

Lens shift correlation chart:

Left-Right Shift(%) 0% 5% 10% 15% 20% 25% 30% 34%

Up-Down Shift(%) 80% 74% 66% 57% 47% 34% 18% 0%

10°

80%

34%34%

80%

Lens center

Approximately 34% (maximum) of

the projected image

Approximately 34% (maximum) of

the projected image

Approximately 80% (maximum) of

the projected image

Approximately 80% (maximum) of

the projected image

● Maximum Up-Down shift varies with the amount of Left-Right shift. Likewise,

maximum Left-Right shift varies with the amount of Up-Down shift.

● The values on the chart are intended to act as a guide. Use them for reference

during installation.

La page est en cours de chargement...

JVC DLA-HD550 Manuel utilisateur

Ce manuel convient également à

JVC DLA-HD550 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents