Allen Bradley Allen-Bradley 58UHF Series RFID Short-Range Transceiver Manuel utilisateur

Marque: Allen Bradley

Modèle: Allen-Bradley 58UHF Series RFID Short-Range Transceiver

Taper: Manuel utilisateur

Installation Instructions

Original Instructions

58UHF RFID Short-range Transceiver

Catalog Numbers 58UHF-TR-100-SR15US, 58UHF-TR-100-SR15EU

Features

• Global Ultra-High Frequency (UHF) RFID solution

- 865...868 MHz EU and UK model (CE)

- 902...928 MHz US and North America model (FCC)

• Tag compatibility: ISO 18000-63 (EPC global Gen2) compliant

• Sensing range up to 1.5 m (4.92 ft)

• Built-in status indicators for diagnostics

• All-in-one linear and circular antennas

• Excellent reliability in harsh environments

Typical Applications

• Asset tracking

• Data acquisition

• Product handling

• Automotive

• Food and pharmaceutical

Specifications

Status Indicator Functionality

WARN IN G: Never disassemble or modify the scanner. Doing so

could result in an accident such as fire or electric shock.

Attribute Value

Enclosure rating IP66/67

Operating temperature [°C (°F)] -20…+55 (-4…+131)

Storage temperature [°C (°F)] -40…+85 (-40…+185)

Relative humidity (1)

(1) No condensation

• Operating: 35...95%

• Storage: 25...85%

Vibration 10 g at 10...500 Hz

Shock resistance [g] 50

Tag compatibility ISO 18000-63

Sensing distance, max (2) [m (ft.)]

(2) The setting limits depend on the country or the function. This reference value can vary depending on

the operating environment tag type.

1.5 (4.92)

Compliance FCC, UL/cUL, CE, UKCA, and ISED

Connector • EtherNet/IP™: M12 4-pin plug DC Micro

• Power and I/O: M12 4-pin socket DC Micro

Communication protocol EtherNet/IP

Supply voltage 19.2…26.4V DC

Current consumption at 24V DC, max •Supply: 1 A CLASS2/SELVS

•Input: 15 mA

•Output: 0.5 A

Communication rate • RFID: 1024 bps

• Ethernet: 10/100 Mbps, half or full-duplex

Frequency

• 865.7…867.5 MHz EU and UK model (at 600 kHz intervals, 4

channels total)

• 902.75…927.25 MHz US and North America model (at 500

kHz intervals, 50 channels total)

Name Description State Indicates

MOD Indicates

status of the

transceivers

Off No power

Steady green Device operational

Flashing green Standby (device has not been configured)

Flashing red Major recoverable fault

Steady red Major nonrecoverable fault

Flashing green/red Self-test (power-up testing)

Link1/2

Indicates

status of

Ethernet (E1/

E2) port

Off No link

Steady green Link

Steady yellow Port disabled

Flashing green Port activity (data packets currently being

exchanged)

Flashing yellow Collision

Steady red Major NIC fault

NET Indicates

status of the

connections

Off No power or powered on with no IP address

Flashing green

No connections (IP address, but no CIP™

connections are

established, and an exclusive owner

connection has timed

out)

Steady green Connected

Flashing red Connection timeout

Steady red Duplicate IP

Flashing green/red Self-test (power-up testing)

R/W

Indicates

status of the

read/write

commands

Off No power

Steady green Powered but idle

Flashing green Transmitting RF carrier wave (no tags

detected)

Steady yellow Succeeded at tag operation (tag read/write

complete)

Flashing yellow Failed at tag operation (tag read/write

incomplete)

Flashing red RF transmit failure

2Rockwell Automation Publication 58UHF-IN001A-EN-P - December 2022

58UHF RFID Short-range Transceiver Installation Instructions

Connector Pinouts

FCC Notice (For U.S. Customers)

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following conditions: (1) This device will not cause

harmful interference; and (2) This device must accept any interference received,

including interference that can cause undesired operation of the device.

Changes and modifications that are not expressly approved by Rockwell

Automation can void your authority to operate this equipment under Federal

Communications Commissions rules.

This equipment is tested and found to comply with the limits for a Class A digital

device, according to part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is

operated in a commercial environment.

IMPORTANT Installation must be in accordance with local and/or

national codes. Servicing energized industrial control

equipment can be hazardous if not in accordance to

recommended safety procedures.

Table 1 - EtherNet/IP (1)

(1) E1 - Standard right-angle Ethernet cables point left.

E2 - Standard right-angle Ethernet cables point right.

DC M12, D-coded, 4-pin Plug Pin Signal Color

1 TxData + White/orange

2 Recv Data + White/green

3 TxData - Orange

4Recv Data - Green

Table 2 - Power I/O

DC M12, D-coded, 4-pin Socket Pin Signal Color

1+24V DC Brown

2Input White

3 0V DC Blue

4Output Black

ATTENTION: This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instruction manual, can cause harmful

interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference, in which case you must correct the interference

at your own expense.

IMPORTANT This equipment complies with FCC radiation exposure

limits for an uncontrolled environment and meets the FCC

radio frequency (RF) Exposure Guidelines. When you install

and operate this equipment, keep a minimum of 35 cm

(13.78 in.) between the radiator and a person’s body.

Rockwell Automation Publication 58UHF-IN001A-EN-P - December 2022 3

58UHF RFID Short-range Transceiver Installation Instructions

ISED Information

This device complies with Innovation, Science and Economic Development

Canada license-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference; and (2) this device

must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Innovation, Sciences et

Développement économique Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux conditions suivantes: (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit

accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d'en compromettre le fonctionnement.

Declaration of Conformity

CE Conformity

Rockwell Automation, Inc. declares that the radio equipment type

58UHF-TR-100-LR15EU is in compliance with the 2014/53/EU Radio Equipment

Directive and the 2011/65/EU RoHS Directive.

For a comprehensive CE certificate visit: rok.auto/certifications.

UKCA Conformity

Rockwell Automation, Inc. declares that the radio equipment type

58UHF-TR-100-LR15EU is in compliance with the Radio Equipment Regulations

(2017 No. 1206) and the Restriction of the Use of Certain Hazardous Substances in

Electrical and Electronic Equipment Regulations (2012 No. 3032).

For a comprehensive UKCA certificate visit: rok.auto/certifications.

Türkiye Cumhuriyeti: AEEE Yönetmeliðine Uygundur

IMPORTANT This equipment complies with ISED radiation exposure

limits for an uncontrolled environment and meets RSS 102

of the ISED radio frequency (RF) Exposure rules. When you

install and operate this equipment, keep a minimum of

35 cm (13.78 in.) between the radiator and a person’s body.

Cet équipement est conforme aux limites d’exposition aux

rayonnements énoncées pour un environnement

non-contrôlé et respecte les règles d’exposition aux

fréquences radioélectriques (RF) CNR 102 de l’ISDE. Cet

équipement doit être installé et utilisé en gardant une

distance de 35 cm (13.78 in.) ou plus entre le radiateur et le

corps humain. Application Frequency Range Power

UHF RFID 865…868 MHz 2 W e.r.p.

Publication 58UHF-IN001A-EN-P - December 2022 | -

Rockwell Otomasyon Ticaret A.Ş. Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400 EEE Yönetmeliğine Uygundur

10007125910 Ver 00

Allen-Bradley, expanding human possibility, and Rockwell Automation are trademarks of Rockwell Automation, Inc.

CIP and EtherNet/IP are trademarks of ODVA, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Waste Electrical and Electronic Equipment (WEEE)

Rockwell Automation maintains current product environmental compliance information on its website at rok.auto/pec.

At the end of life, this equipment should be collected separately from any unsorted municipal waste.

Rockwell Automation Support

Use these resources to access support information.

Documentation Feedback

Your comments help us serve your documentation needs better. If you have any suggestions on how to improve our content, complete the form at rok.auto/docfeedback.

Technical Support Center Find help with how-to videos, FAQs, chat, user forums, Knowledgebase, and product notification updates. rok.auto/support

Local Technical Support Phone Numbers Locate the telephone number for your country. rok.auto/phonesupport

Technical Documentation Center Quickly access and download technical specifications, installation instructions, and user manuals. rok.auto/techdocs

Literature Library Find installation instructions, manuals, brochures, and technical data publications. rok.auto/literature

Product Compatibility and Download Center (PCDC) Download firmware, associated files (such as AOP, EDS, and DTM), and access product release notes. rok.auto/pcdc