Jenn-Air JFD2589KEP Manuel utilisateur

Catégorie
Frigos
Taper
Manuel utilisateur
TA B LE O F C O NTENTS
Form No. A/04/06 Part No. 12828168 ©2006 Maytag Appliances Sales Co. Printed in USA
J ENN-AIR
F RENCH D OOR R EFRIGERATOR
USE & CARE
GUIDE
Important Safety Instructions ........................................1-2
Inst
allation
.............................................................................
3-8
Temperature Controls.....................................................9-11
Fresh Food Features.....................................................12-13
Freezer Features ...................................................................14
Ice and W
ater
.........................................................................15
Water Filter.......................................................................16-18
Food Storage Tips..........................................................19-21
Care and Cleaning ........................................................22-25
Operating Sounds ................................................................26
T
rouble
shooting
..............................................................
27-30
Warranty & Service...............................................................31
Guide de l’utilisateur...........................................................32
Guía de uso y cuidado
.......................................................
6
4
12828168 JA FD ENG 3/1/06 7:55 AM Page 1
1
IMPORTANT SAFETY INSTRUCTIONS
Installer: Please leave this guide with this appliance.
Consumer: Please read and keep this Use & Care
Guide for future reference. This guide provides
proper use and maintenance information.
Keep sales receipt and/or cancelled check as proof
of purchase.
Call: 1-800-JENNAIR (1-800-536-6247)
USA and Canada
Have complete model and serial number
identification of your refrigerator. This is located on a
data plate inside the refrigerator compartment, on
the
upper left side. Record these numbers below for
easy access.
Model Number
_______________________________
Serial Number ________________________________
Date of Purchase______________________________
In our continuing effort to improve the quality and
performance of our appliance
s, it may be necessary
to make changes to the appliance without revising
this guide.
WARNINGHazards or unsafe practices which
C
O
ULD
re
sult in severe personal injury or death.
WARNING
DANGER – Immediate hazards which WILL result
in severe personal injury or death.
DANGER
C
AUTI
O
N
Hazards or uns
afe practice
s which
C
O
U
LD
result in minor personal injury or property damage.
CAUTION
What You Need to Know About
Safety Instructions
Warning and Important Safety Instructions appearing in
this guide are not meant to cover all possible
conditions and situations that may occur. Common
sense, caution and care must be exercised when
installing, maintaining or operating appliance.
Always contact the manufacturer about problems or
conditions you do not understand.
Recognize Safety Symbols, Words,
Labels
This appliance is equipped with a three-prong
grounded plug for your protection against possible
electrical shock hazards. It must be plugged into a
properly grounded wall recept
acle. Where a standard
two-prong wall receptacle is encountered, it is the
personal responsibility and obligation of the customer
to have it replaced with a properly grounded three-
prong wall receptacle.
Do not, under any
circumstances, cut or remove the third (ground)
prong from the power cord. Do not
use an adapter
plug.
P
ower supply cord with
three-prong grounded plug
Properly
grounded type
wall receptacle
2
IMPORTANT SAFETY INSTRUCTIONS
SAVETHESE INSTRUCTIONS
To reduce risk of fire, electric shock, serious
injury or death when using your refrigerator,
follow basic precautions, including the following:
1. Read all instructions before using the refrigerator.
2. Observe all local codes and ordinances.
3. Be sure to follow grounding instructions.
4. Check with a qualified electrician if you are not
sure this appliance is properly grounded.
5.
Do not ground to a gas line.
6.
Do not ground to a cold-water pipe.
7. Refrigerator is designed to operate on a separate
115 volt, 15 amp., 6
0 cycle line.
8.
Do not modify plug on power cord. If plug doe
s
not fit wall receptacle, have proper receptacle
installed by a qualified electrician.
9.
Do not use a two-prong adapter, extension cord
or power strip.
10.
Do not remove warning tag from power cord.
11.
Do not tamper with refrigerator controls.
12.
Do not service or replace any part of refrigerator
unle
ss specifically recommended in Use and Care
Guide or published user-repair instructions.
Do not attempt service if instructions are not
understood or if they are beyond personal skill
level.
13. Always disconnect refrigerator from electrical
supply before attempting any service. Disconnect
power cord by grasping the plug, not the cord.
14. Install refrigerator according to Installation
Instructions. All connections for water, electrical
power and grounding must comply with local
codes and be made by licensed personnel when
required.
15. Keep your refrigerator in good condition. Bumping
or dropping refrigerator can damage refrigerator
or cause refrigerator to malfunction or leak. If
damage occurs, have refrigerator checked by
qualified service technician.
16. Have worn power cords and/or loose plugs
replaced by a qualified service technician.
17. Always read and follow manufacturer’s storage
and ideal environment instructions for items being
stored in refrigerator.
18. Your refrigerator
should not be operated in the
pre
sence of explosive fume
s.
19.
Children
should not climb, hang or st
and on any
part of the refrigerator.
20.
Clean up spills or water leakage associated with
water installation.
WARNING
12828168 JA FD ENG 3/1/06 7:55 AM Page 3
3
Your refrigerator was packed carefully for shipment.
Remove and discard shelf packaging and tape.
Do not
remove the serial plate.
Location
Do not install refrigerator near oven, radiator or
other heat source. If not possible, shield refrigerator
with cabinet material.
Do not install where temperature falls below 55° F
(13° C) or rises above 110° F (43° C). Malfunction
may occur at this temperature.
Refriger
ator is designed for indoor household
application only.
Measuring the Opening
W
hen installing your refrigerator, measure carefully.
Allow
1
2 space at top and
1
2 space behind the
machine compartment cover (located in the rear) for
proper air circulation.
Subflooring or floor coverings (i.e. carpet, tile, wood
floors, rugs) may make your opening smaller than
anticipated.
Some clearance may be gained by using the leveling
procedure under
Leveling, page 4.
Important: If refrigerator is to be installed into a
recess where the top of the refrigerator is completely
covered, use dimensions from floor to top of hinge c
ap
to verify proper clearance.
Glass Panel Doors (select models)
To avoid possible injury, pr
oduct or property
damage, observe the following:
When working directly on the doors, protect the
door corners and sides by placing doors on a
non-abrasive sur
face protected by towels or rugs.
P
rotect the glass panel side
s when securing the
unit to a dolly
.
D
O NOTOVER-TIGHTEN!
Overtightening the restraints may shatter the glass
which could cause personal injury.
Do not carry or transport removed doors by the
handle
s.
Fully tighten handle set screws when installing the
door handle
s.
CAUTION
Transporting Your Refrigerator
N
EVER
t
ransport refrigerator on its side. If an
upright position is not possible, lay refrigerator on its
back. Allow refrigerator to sit upright for
approximately 30 minutes
before plugging it in to
assure oil returns to the compressor. Plugging the
refrigerator in immediately may cause damage to
internal parts.
Use an appliance dolly when moving refrigerator.
ALWAYS truck refrigerator from its side or
back–
NEVERfrom its front.
Protect outside finish of refrigerator during transport
4
INSTALLATION
Materials Needed:
3
8 hex head driver
Carpenter’s level.
1. Remove toe grille.
Grasp firmly and pull outward to unclip.
2. Using hex head driver, turn the front adjustment
screws
(A) on each side to raise or lower the front
of the refrigerator (see illustration below).
3. Using the hex head driver, turn each of these
adjustment screws
(B) to raise or lower the rear of
the refrigerator
.
4.
Using a c
arpenter’s level, make sure front of
refrigerator is
1
4 (6 mm) or approximately
1
2 bubble
higher than back of refrigerator and that the
refrigerator is level from side to side.
5. Turn stabilizing legs
(C) clockwise until firmly
against floor
.
6. Turn adjustment screws
(A) counterclockwise to
allow the full weight of the refrigerator to re
st on
the stabilizing legs.
7. Replace the toe grille.
Leveling
To protect property and refrigerator from
damage, observe the following:
Protect vinyl or other flooring with cardboard, rugs,
or other protective material.
Do not use power tools when performing leveling
procedure.
CAUTION
To enhance the appearance and maintain performance,
t
he refrigerator should be leveled per instructions
below.
Notes:
Complete any required water supply connection
before leveling.
Some models only have adjustment screws
(A).
CC
A
B
A
B
Align the toe grille mounting clips with the lower
cabinet slots.
Push the toe grille firmly until it snaps into place.
To avoid electrical shock which can cause
severe personal injury or death, observe the
following:
Disconnect power to refrigerator before removing
doors or drawer. Connect power only after
replacing doors or drawer.
WARNING
T
o avoid damage to walls and flooring, protect vinyl
or other flooring with cardboard, rugs or other
protective material.
CAUTION
Door and Drawer Removal
S
ome installations require door/drawer removal to
transport the refrigerator to its final location.
Materials Needed:
5
1
6
hex head driver
Phillips screwdriver
3
8 hex head driver
1.
Unplug power cord from power source.
2. Remove toe grille.
3. Remove top hinge cover from
refrigerator door by removing Phillips
screw and r
et
ain screw and cover for
later use.
4. Unscrew
5
16 hex head screws from
top hinge to remove hinge and
r
et
ain all screws for later use.
5. Lift right side refrigerator door from
center hinge pin. Remove door
closure from center hinge pin on
the right side and ret
ain for later
use.
6.
Disconnect wire harne
ss on top
of left side refrigerator door top
hinge.
Release two-pin connector by
pressing junction point with a
flat blade screwdriver or
fingernail.
Green ground wire remains
attached to the hinge.
7. Unscrew
5
16 hex head screws from
top hinge to remove hinge and
ret
ain for later use.
right
side
door
closure
12828168 JA FD ENG 3/1/06 7:55 AM Page 5
5
INSTALLATION
Pullout Freezer Drawer
To avoid electrical shock which can cause severe
personal injury or death, disconnect power to
refrigerator before removing doors. After replacing
doors, connect power.
WARNING
To prevent accidental child entrapment or
suffocation risk, do not remove the divider in the
top freezer basket.
DANGER
To avoid possible injury, product, or property
damage, you will need two people to per
form the
following instructions.
CAUTION
Materials Needed:
Phillips screwdriver
To Remove:
1.
Pull drawer open to full
extension.
2. Tilt the lower basket
forward and lift to remove.
3. On each white drawer
bracket is a basket cradle
with two snap att
achment
s.
T
o release each cradle,
unlatch the snaps by
pushing them inward, away from the side bracket.
Lift the cradles off of the rails.
4.
Remove Phillips screw from each of the drawer
slides (select models).
To Install:
1. Pull both rails out to
full extension.
2. While supporting
door front, hook
supports into slots
located on inside of
each slide.
6.
Tilt the lower basket front down and set it down
into the basket cradles.
Basket cradle
snap attachments
Note: All four drawer bracket supports must be in
the proper slots for the drawer to function properly.
3. Lower door front into final position.
4.
Replace and tighten Phillips screws that were
removed from the drawer slides (select models).
5.
Place the basket cradle
s back onto the drawer
slides. Align basket cradle snaps with the slots on
the drawer brackets and press each cradle toward
the bracket until it clicks.
Lift left side refrigerator door, along with top
hinge, from center hinge pin.
Remove center hinge pin with a
5
16 hex head
driver and retain hinge pin for later use.
8. Remove Phillips screws to
remove right and left hinges
and retain all screws for later
use.
9. Remove both stabilizing
brackets with
3
8 hex head
driver and retain screws for
later use.
5. Lift top of drawer front to
u
nhook the drawer from
t
he slides. Lift door front
out to remove.
12828168 JA FD ENG 3/1/06 7:55 AM Page 6
6
INSTALLATION
Door Reinstallation
M
aterials Needed:
Phillips screwdriver
5
1
6
hex head driver
1. Install hinge assemblies:
Install center hinge with Phillips screws.
2. Place hinge side of refrigerator door
on center hinge pin.
Install top hinge with
5
16 hex head
screws.
3. While holding refrigerator door
upright, tighten down top hinge
with
5
1
6
hex head driver.
4. Reconnect two-pin connector.
5. Replace top hinge covers.
Handles (style varies by model)
This handle style is installed at the factory. Style may
vary by model.
Materials Needed:
3
3
2
Allen wrench
To Remove:
Remove set screw from
handle mounting post
using the
3
32 Allen
wrench.
Repeat the procedure on
all posts to remove the
handle.
To replace:
Align handle with the mounting posts.
F
ully tighten all set screws to secure handle
in place.
To Remove:
Loosen set screws in handle using
3
3
2
Allen
wrench.
Repeat the procedure on all screws.
To Replace:
Align handle with the mounting posts.
Apply upward pressure to the handle and hold.
Fully tighten all set screws to secure handle in
place.
Metal Handle
Materials Needed:
3
32 Allen wrench
Gloves to protect hands
Note: Metal handles can scratch doors.
To avoid electrical shock which can cause severe
personal injury or death, DONOTattempt to remove
the hinged seal from the fre
sh food section.
WARNING
To avoid possible product damage, ALWAYS verify
that the hinged seal is folded against the edge of
the door prior to closing.
CAUTION
Opening and Closing Your
Fresh Food Doors
Your new refrigerator is uniquely designed with two
fresh food doors. Either door can be opened or closed
independently of one another.
There is a vertically-hinged section on the left fresh
food door. When the left door is closed, the hinged
section automatically forms a seal between the two
doors when both doors are closed.
When the left door is opened, the hinged seal
automatic
ally folds inward so that it is out of the way
.
Vertically
hinged section
12828168 JA FD ENG 3/1/06 7:55 AM Page 7
7
INSTALLATION
Connecting the Water Supply
(select models)
To reduce the risk of injury or death, follow
basic precautions, including the following:
Read all instructions before installing ice maker.
Do not attempt installation if instructions are not
understood or if they are beyond personal skill
level.
Observe all local codes and ordinances.
Do not service ice maker unle
ss specifically
recommended in Use & Care Guide or published
user-repair instructions.
Disconnect power to refrigerator
before installing
ice maker.
Water damage due to an improper water
connection may cause mold/mildew growth. Clean
up spills or leakage immediately!
WARNING
To avoid property damage or possible injury,
follow basic precautions, including the
following:
Consult a plumber to connect
1
4 O.D. copper
tubing
to household plumbing to assure
compliance with loc
al code
s and ordinance
s.
Confirm water pressure to water valve is between
35 and 100 pounds per square inch, 20 pounds
per square inch without filter.
Do not use a self-piercing or
3
16 saddle valve.
Both reduce water flow and can become clogged
over time, and may c
ause leaks if repair is
attempted.
Tighten nuts by hand to prevent cross threading.
Finish tightening nuts with pliers and wrenches.
Do not over-tighten.
Wait two to three hours
before placing refrigerator
into final position to check and correct any water
leaks. Recheck for leaks after 24 hours.
Verify the copper tubing under the sleeve is
smooth and free from defects.
Do not reuse an
old sleeve.
CAUTION
Materials Needed:
1
4 outer diameter flexible copper tubing
Shut-off valve (requires a
1
4 hole to be drilled into
water supply line
before valve attachment)
Adjustable wrench (2)
1
4 hex nut driver
Notes:
Use copper tubing only for installation. Plastic is
less durable and can cause damage.
Add 8’ to tubing length needed to reach water
supply for creation of service loop.
1. Create service loop with
copper tubing (minimum 2’
diameter). Avoid kinks in the
copper tubing when
bending the service loop.
Do
not use plastic tubing.
2.
Remove plastic cap from water valve
inlet por
t.
3. Place brass nut
(A) and sleeve (B)
on copper tube end as illustrated.
Reminder: Do not use an old
sleeve. T
he nut and sleeve are
provided in the Use and Care
packet.
4. Place end of copper tubing into
water valve inlet port. Shape
tubing slightly.
Do not kink – so
that tubing feeds straight into inlet
por
t.
2’ diameter
minimum
A
B
A
B
12828168 JA FD ENG 3/1/06 7:55 AM Page 8
8
INSTALLATION
5. Slide brass nut over sleeve and screw
nut into inlet port.
Place adjustable wrench on nut
(1) attached to plastic waterline
and maintain position.
Using second adjustable wrench
turn the lower nut
(2)
counterclockwise and fully
tighten while holding the upper
nut in place.
Important: Do not over-tighten.
Cross threading may occur.
6. Pull on tubing to confirm
connection is secure.
Connect tubing to frame
with water tubing clamp
(C)
and turn on water supply.
Check for leaks and correct
if necessary. Continue to
observe the water supply
connection for two to three
hours prior to moving the
refrigerator to its permanent
location.
7. Monitor water connection for 24 hours.
Correct leaks, if necessary.
C
1
2
12828168 JA FD ENG 3/1/06 8:04 AM Page 9
9
TEMPERATURE CONTROLS
Touch Temperature Controls
T
he controls are located at the top front of the
refrigerator compartment.
Control
Initial Control Settings
After plugging the refrigerator in, set the controls.
Pressing the or pads adjusts the controls to
the desired setting.
The temperature control range for both
compartments is 1 through 7 (coldest).
Set the Freezer control on
4.
Set the Refrigerator control on
4.
Let the refrigerator run at least 8 to 12 hours
before
adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. T
his is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. This condition will be more noticeable when
you first start the refrigerator, during hot weather and
after excessive or lengthy door openings.
Adjusting the Controls
24 hours after adding food, you may decide that one
or both compartments should be colder or warmer. If
so, adjust the control(s) as indicated in the
Temperature Control Guide table below. See page 19
for instructions on checking compartment
temperature.
Except when starting the refrigerator,
do not change
either control more than one number at a time.
Allow 24 hours for temperatures to stabilize.
T
emperature Control Guide
Refrigerator too warm
Refrigerator too cold
Freezer too warm
Freezer too cold
Turn refrigerator OFF
Set the Refrigerator control
to next higher number by
pre
ssing the pad.
Set the Refrigerator control
to next lower number by
pressing the pad.
Set the Freezer control to
next higher number by
pressing the pad.
Set the Freezer control to
next lower number by
pressing the pad.
Press the
Freezer or
Refrigerator pad until
a dash “–” appears in the
display.
12828168 JA FD ENG 3/1/06 7:55 AM Page 10
10
TEMPERATURE CONTROLS
Trisensor Climate Control
(select models)
The control is located at the top front of the fresh food
compartment.
Control
Initial Temperature Setting
Temperatures are preset at the factory at 38° F (3° C)
in the fresh food compartment and 0° F (-17° C) in the
freezer compartment.
Adjusting the Control
24 hours after adding food, you may decide that one
or both compartments should be colder or warmer. If
so, adjust the control as indicated in the Temperature
Control Guide below.
The first touch of the or pads shows the
current temperature setting.
The display will show the new setting for
approximately three seconds, and then return to the
actual temperature currently within that
compartment.
Do not change either control more than one degree
at a time. Allow temperature to stabilize for 24 hours
before making a new temperature adjustment.
Speed Ice
W
hen activated, Speed Ice reduces the freezer
temperature to the optimum setting for 24
hours in order to produce more ice.
Important:
When the Speed Ice feature is in operation, the
and pads for the freezer control will not operate.
Reset Filter (select models)
When a water filter has been installed in the
refrigerator
, the yellow Order light will
illuminate when 90 percent of the volume of water for
which the filter is rated has passed through the filter
OR 11 months have elapsed since the filter has been
installed.
The red Replace light will illuminate when the rated
volume of water has passed through the filter OR 12
months have elapsed since the filter was installed. A
new filter should be installed immediately when the
Replace light is illuminated.
After replacing the filter, press and hold the
Reset
Filter
pad for three seconds. The Order and Replace
lights will go off.
Vacation Mode
The V
ac
ation Mode feature c
auses the freezer
to defrost less frequently, conserving energy.
The Vacation Mode indicator light will
illuminate when the feature is activated. T
o deactivate,
press the
Vacation Mode pad again OR open either
door
. T
he indic
ator light will go out.
Temp Alarm
The Temp Alarm system will alert you if the
freezer or fresh food temperatures exceed
normal operating temperature
s due to a power
out
age or other event. W
hen activated, the Temp
Alarm light will illuminate.
If the freezer or fresh food temperatures have
exceeded the
se limit
s, the display will alternately show
the current compar
tment temperature
s and the highe
st
Temperature Control Guide
Refrigerator too cold
Refrigerator too warm
Freezer too cold
Freezer too warm
T
urn r
efrigerator OFF
Set the Refrigerator control
to next higher number by
pressing the pad.
Set the Refrigerator control
to next lower number by
pressing the pad.
Set the Freezer control to
next higher number by
pressing the pad.
Set the Freezer control to
next lower number by
pressing the pad.
P
re
ss the
F
r
eezer
pad
until OFF appears in the
display. Press either the
F
r
eezer
or Refriger
ator
pad to turn back on.
Notes:
Door openings will not deactivate Vacation Mode
for approximately one hour after activation.
If vac
ationing for more than a few days, see the
Preparing for Vacation section, page 25.
12828168 JA FD ENG 3/1/06 7:55 AM Page 11
11
TEMPERATURE CONTROLS
compartment temperatures reached when the power
was out. An audible alarm will sound repeatedly.
Press the
Temp Alarm pad once to stop the audible
alarm. The Temp Alarm light will continue to flash and
the temperatures will alternate until the temperatures
have stabilized.
To turn off Temp Alarm, press and hold the
Temp
Alarm
pad for three seconds. The indicator light will
go off.
Door Alarm
The Door Alarm will alert you when one of the
doors has been left open for five continuous minutes.
When this happens, an audible alarm will sound every
few seconds until the door is closed O
R press the
Door Alarm pad to deactivate the feature.
Max Cool
When activated, Max Cool causes the fresh
food and freezer temperatures to drop to the minimum
settings on the control. T
his cools down the
refrigerator and freezer after extended door openings
or when loading the refrigerator or freezer with warm
food.
Important: When the Max Cool feature is in
operation, the and pads for the refrigerator
and freezer controls will not operate.
T
o activate, press the
Max Cool pad. Max Cool will
deactivate automatically after 12 hours, OR press the
Max Cool pad to deactivate the feature.
User Preferences
Access the User Preferences menu to:
Activate or turn off Super Cool (select models)
Change the temperature display from
°
F to °C
Enable or disable audible alarms.
Adjust the light level at which the Dispenser Auto
Light will illuminate (when this feature is activated on
the ice and water dispenser) (select models).
Activate the Sabbath Mode
To access the User Preferences menu, press and hold
the
Door Alarm pad for three seconds. When in the
User Preferences mode, a short title for the feature will
appear in the Freezer temperature display and the
f
eature status will appear in the Refrigerator
temperature display.
1. Use the
Freezer and control to scroll
through the features.
2. When the desired feature is displayed, use the
Refrigerator and control to change the
status.
3. When changes are complete, press the
Door Alarm
pad for three seconds OR close the Fresh Food
door.
Super Cool (CC) (select models)
When Super Cool is ON, an air-mixing fan in the fresh
food compartment is activated to improve air flow and
temperature control. To save energy, this feature may
be deactivated by choosing
OFF.
Temperature Display (F_C)
Change the display to show temperatures in degrees
Fahrenheit or degree
s Celsius.
Alarm (AL)
When the Alarm mode is OFF, all audible alarms will
be dis
abled until the feature is turned on.
Auto Light Level Selection (LL) (select models)
This setting adjusts the light level at which the
dispenser light will illuminate when the sensor detects
that the light levels in the room are low. Setting 1 is
the darke
st light level setting, setting 9 is the lighte
st
light level setting.
Important: The Auto Light (select
models) must be activated on the ice and water
dispenser control to take advantage of this option.
Sabbath Mode (SAB)
When the Sabbath Mode is ON, all control lights and
the night light will be disabled until the feature is
turned OFF. This feature does not disable the interior
lights. Press any pad to restore the control lights.
Warm Cabinet Surfaces
At times, the front of the refrigerator cabinet may be
warm to the touch. This is a normal occurrence that
helps prevent moisture from condensing on the
cabinet. This condition will be more noticeable when
the refrigerator is first st
arted, during hot weather and
after exce
ssive or lengthy door openings.
12828168 JA FD ENG 3/1/06 7:55 AM Page 12
12
Crisper Drawers
The Crisper Drawers provide a higher humidity
environment for fresh fruit and vegetable storage.
Controls
T
he Crisper Controls regulate the amount of humidity
in the crisper drawer
. Slide the control toward the
F
ruit
setting for produce with outer skins. Slide the control
toward the
Vegetables setting for leafy produce.
FRESH FOOD FEATURES
Shelves
To avoid personal injury or property damage,
observe the following:
Do not attempt to adjust a shelf that is loaded
with food.
Confirm shelf is secure
before placing items on
shelf.
Handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
CAUTION
Door Storage
Dairy Center
The Dairy Center provides
convenient door storage for
spreadable items such as butter
and margarine. This compartment can be moved to
different loc
ations to accommodate storage needs. To
use the dairy center, raise the cover.
To Remove:
Raise the cover, pull upward and tilt out.
To Install:
Slide the Dairy Center in and down until firmly seated
in the door liner.
Door Buckets
Door Buckets can be moved to meet storage needs.
To Remove:
Slide bucket up and pull straight out.
To Install:
Slide bucket in and down until
firmly seated in the door liner.
Your refrigerator has Spill-Proof Glass Shelves. The
Spill-Proof shelves have a spill retainer edge which
allows for easier clean up and are equipped with a
slide out feature. T
o slide out, grasp the front of the
shelf and pull forward. Push in the shelf to return to
the original position.
To Remov
e a Shelf:
Slightly tilt up the front and lift up
the rear of the shelf, then pull the
shelf straight out.
To Lock the Shelf Into Another
Position:
Tilt up the front edge of the shelf.
Insert the hook into the desired frame openings and
let the shelf settle into place.
Be sure the shelf is securely locked at the rear.
Rear Shelf Extensions
Rear Shelf Extensions help prevent articles from
falling off the back of the shelf.
To remove and install shelf extension:
To remove, pull extension straight up from the rear of
shelf.
T
o inst
all, inser
t posts of the
shelf extension into holes in the
shelf frame.
T
he Crisper Top serves as the lower fresh food shelf.
To Remove the Crisper Top:
Remove crisper drawers.
Place hand under the frame to push up the glass. Lift
g
lass out.
Lift frame from refrigerator liner rails.
To Install:
Replace frame in refrigerator liner rails.
Carefully replace glass into frame.
12828168 JA FD ENG 3/1/06 7:55 AM Page 13
13
FRESH FOOD FEATURES
Note: For best results, keep the crisper drawers
tightly closed.
To Remove:
Pull drawer out to full extension. Tilt up front of
drawer and pull straight out.
To Install:
Insert drawer into frame rails and push back into
place.
Gourmet Bay™
The Gourmet Bay™ drawer is a full-width drawer with
adjustable temperature control. This drawer can be
used for large party trays, deli items, beverages or
miscellaneous items. There is a divider to
organize the drawer into sections if desired.
There is a temperature control which adjusts
the amount of cold air allowed into the
Gourmet Bay™. The control is located on the
right of the drawer, under the lid.
Set the control to
Cold to provide a normal
refrigerator temperature. Set the drawer on the
Coldest setting when a temperature colder than the
main refrigerator compartment is desired. Use the
Coldest setting when storing meats.
To Remove:
Lift lid. Pull drawer out to full extension. Tilt the
drawer front up and pull straight out.
To Install:
Push metal glide rails to the back of the refrigerator.
Place drawer onto rails and slide drawer back until it
falls into place.
To Remove Divider:
Pull drawer completely out and raise the front of the
divider to unhook it from the rear wall of the pantry
and lift it out.
To InstallDivider:
Hook back of divider over rear wall of pantry and
lower into place.
Notes:
Cold air directed to the Gourmet Bay™ drawer can
decrease refrigerator temperature. Refrigerator
control may need to be adjusted.
Do not place leafy veget
able
s in the Gourmet
Bay™ drawer. Colder temperatures could damage
leafy produce.
Coldest
Cold
Accessories
Wine Trivet/Can Rack (select models)
The W
ine T
rivet/Can Rack
accessory fits in the Gourmet Bay™
or on a shelf.
Bottle
s or cans can be laid
crosswise, or a single bottle may be
laid in the center depression.
Gourmet Bay™ Tray
The Gourmet Bay™ Tray allows for a
removable tray within the full-width
storage drawer.
Adjustable Storage Rack
T
he Adjust
able Storage R
ack provide
s a
place for horizontally storing wine. The
rack can also hold an egg carton.
Position the rack to rest on the left-hand side of a
refrigerator shelf.
Egg Cradle
T
he Egg Cradle (style may vary) holds
a “
dozen-plus” eggs. It c
an be
removed to carry to work area or to be
washed.
12828168 JA FD ENG 3/1/06 7:55 AM Page 14
14
FREEZER FEATURES
Note: Lower Freezer Drawer: See page 5 for
lower basket and complete pullout drawer
instructions.
Upper Wire Basket
To Remove:
Pull upper basket out to full extension and lift out to
remove.
To Install:
Slide upper basket into freezer. Make sure that rear
of basket hooks behind the rail catch.
To prevent accidental child entrapment or
suffocation risk, do not remove the divider in the
top freezer basket
DANGER
Accessories
Ice Bin
The Ice Bin provides storage
for ice.
Lower Basket Tray
The Basket Tray is a removable
plastic item that rests on the
bottom of the lower pullout
basket to catch spills and small
food items before they can fall
through to the freezer
compartment.
The tray can be removed for easy
cleaning by lifting the tray from the basket.
Lower Basket Divider
The Lower Basket Divider allows the option to organize
the basket area into sections.
To remove and replace divider:
To remove, pull divider straight up.
To install, hook top corners of divider over top
horizontal basket rungs.
12828168 JA FD ENG 3/1/06 7:55 AM Page 15
15
ICE AND WATER
Water Dispenser
The Water Dispenser is located on the
left side wall of the fre
sh food section.
This design is for cold water
dispensing only.
T
o avoid personal injury or property damage,
observe the following:
Do not place fingers or hands on the automatic
ice making mechanism while the refrigerator is
plugged in. This will help protect you from possible
injury
. It will also prevent interference with moving
parts of the ejector mechanism and the heating
element that releases the cubes.
Under certain rare circumstances, ice cubes may
be discolored, usually appearing with a green-
bluish hue. The cause of this unusual discoloration
can be a combination of factors such as cer
tain
characteristics of local waters, household
plumbing and the accumulation of copper salts in
an inactive water supply line which feeds the ice
maker. Continued consumption of such discolored
ice cubes may be injurious to health. If such
discoloration is observed, discard the ice cubes
and contact your dealer to purchase and install a
water line filter
.
Water damage due to improper water connection
may cause mold/mildew growth.
Clean up water and ice spills to avoid personal
injury and to prevent mold/mildew growth.
WARNING
Automatic Ice Maker
Connect the ice maker to the water supply as
instructed on pages 7-8. Proper water flow and a
level refrigerator are essential for optimal ice
maker performance.
Operating Instructions
Confirm ice bin is in place and ice
maker arm is down.
After freezer section reaches
between 0° to 2° F (-18° to -17° C),
ice maker fills with water and
begins operating. You will have a
complete harvest of ice approximately every three
hours.
Allow approximately 24 hours after installation to
receive first harvest of ice.
Discard ice created within first 12 hours of operation
to assure system is flushed of impurities.
Stop ice production by raising ice maker arm until
click is heard.
Ice maker will remain in the off position until arm is
pushed down.
The first one or two batches will probably contain
undersized and irregular cubes because of air in the
supply line.
When the ice cubes are ejected it is normal for
several cube
s to be joined together at the ends. T
hey
can easily be broken apart. The ice maker will
continue to make ice until the supply of ice cubes
raises the ice maker arm, shutting the ice maker off.
Certain sounds may accompany the various cycles of
the ice maker. The motor may have a slight hum, the
cubes will rattle as they fall into an empty storage bin
and the water valve may click or “buzz” occ
asionally
.
If the ice is not used frequently, the ice cubes will
become cloudy, shrink, stick together and taste stale.
Empty the ice storage bin periodically and wash it in
lukewarm water. Be sure to dry the bin thoroughly
before replacing it.
Beverages and foods
should not be placed in the
ice storage bin for quick chilling. T
he
se items c
an
block the ice maker arm, causing the ice maker to
malfunction.
Turn off (arm up) the ice maker when the water
supply is to be shut off for several hours.
T
o Remove the Ice Bin:
Pull it forward, away from the ice maker. To avoid the
ice maker dumping ice while the bin is removed, turn
the ice maker off by raising the icemaker arm.
To Install the Ice Bin:
Reverse the above procedure. Turn the ice maker on
by lowering the ice maker arm.
To Dispense Water:
Hold container under spout and
press dispenser pad.
12828168 JA FD ENG 3/1/06 7:55 AM Page 16
16
WATER FILTER
Removal and Installation
To avoid serious illness or death, do notuse
refrigerator where water is unsafe or of unknown
quality without adequate disinfection before or after
use of filter.
WARNING
After installing a new water filter, always
dispense water for two minutes
before
removing the filter for any reason. Air trapped in
system may cause water and cartridge to eject.
Use caution when removing.
The bypass cap does not filter water. Be sure to
have replacement cartridge available when filter
change is required.
If water filtration system has been allowed to
freeze, replace filter car
tridge.
If system has not been used for several months, or
water has an unpleas
ant taste or odor, flush
system by dispensing two to three glasses of
water. If unpleas
ant taste or odor persists, change
filter cartridge. If system has not been use for
three months or more, replace water filter
cartridge.
CAUTION
3
. Rotate gently
c
lockwise
u
ntil
filter stops. Snap filter cover
closed.
4. Reduce water spurts by
flushing air from system.
Run water continuously for
two minutes through
dispenser until water runs steady. During initial
use, allow about a one- to two-minute delay in
water dispersal to allow internal water tank to fill.
Additional flushing may be required in some
households where water is of poor quality.
Replacing Water Filter
Important: Air trapped in system may cause water
and cartridge to eject. Always dispense water for two
minutes before removing the filter for any reason. Use
caution when removing.
1. Turn filter
counterclockwise until it releases from
filter head.
2. Drain water from filter into sink, and dispose in
normal household trash.
3. Wipe up excess water in filter cover and continue
with
Initial Installation, steps 2 through 4.
The filter should be changed at least every 12 months.
Important: Condition of water and amount used
determines life span of water filter cartridge. If water
use is high, or if water is of poor quality, replacement
may need to take place more often.
To purchase a replacement water filter cartridge,
contact your dealer or call 1-800-JENNAIR
(1-8
00-53
6-6
24
7) U
SA and Canada.
The dispenser feature may be used without a water
filter cartridge. If you choose this option, replace filter
with blue bypass cap.
Initial Installation
The water filter is located in the
upper right-hand corner of the fresh
food compartment.
1. Remove blue bypass cap and
retain for later use.
2.
Remove sealing label from end
of filter and insert into filter head.
12828168 JA FD ENG 3/1/06 7:55 AM Page 17
17
WATER FILTER
System Specification and Performance Data Sheet
Refrigerator Water Filter Cartridge Model UKF8001AXX
Specifications
Service Flow Rate (Maximum).............................................0.78 GPM (2.9 L/min)
Rated Service Life UKF8001AXX-750 (Maximum)......750 gallons/2838 liters
Maximum Operating Temperature .....................................100° F / 38° C
Minimum Pressure Requirement........................................35 psi /241 kPA
Minimum Operating Temperature......................................33° F/1° C
Maximum Operating Pressure.............................................120 psi /827 kPA
Performance Data
1000 Apollo Road
Eagan, Minnesota 55121-2240
651.450.4913
EPA EST #35917-MN-1
100834/B
The PuriClean
TM
II retractable water filtration system uses a
UKF8001AXX replacement cartridge. Timely replacement of
filter c
ar
tridge is e
ssential for per
formance satisfaction from
this filtration system. Please refer to the applicable section of
your Use & Care Guide for general operation, maintenance
requirement
s and troubleshooting. Suggested retail price of
replacement water filter is $3
9.9
9.
T
his system has been te
sted according to AN
SI/NSF 42 and
53 for reduction of the substance listed above. The
concentration of the indicated substances in water entering
the system was reduced to a concentration le
ss than or equal
to the permissible limit for water leaving the system, as
specified in ANSI/NSF 42 and 53.
*
T
e
sted using a flow rate of 0.78 gpm; pressure of 60 psig; pH of 7
.5 + 0.5; temp. of
68° + 5° F (20° + 3° C)
** Measurement in Particles /ml. Particles used were 0.5 - 1 microns
*** NTU - Nephelometric Turbidity Units
General Use Conditions
Read this P
erformance Data Sheet and compare the
c
apabilitie
s of this unit with your actual water treatment
needs.
D
ON
O
Tuse this product where w
ater is
microbiologically unsafe or of unknown quality without
adequate disinf
ection bef
ore or after the system.
System certified f
or cyst r
eduction may be used on
disinfected water that may contain filterable cysts.
USE ONLY WITH COLD WATER SUPPLY. CHECK FOR
COMPLIANCE WITH THE STATE AND LOCAL LAWS
AN
D R
E
G
ULATIONS.
TM
Standard No. 42: Aesthetic Effects
Taste and Odor Reduction
Chlorine Taste & Odor
Mechanical Filtration Unit
P
articulate Reduction Class 1
Standard No. 53: Health Effects
Chemical Reduction Unit
Lead, Atrazine, Lindane, Benzene,
Carbofuran, p-Dichlorobenzene, Mercury
& T
oxaphene Reduction
Mechanical Filtration Unit
Cyst, Turbidity and Asbestos Reduction
Tested and certified by NSF International against ANSI/NSF Standards 42 & 53
in models UK
F8
001AXX-750 for the reduction of:
P
arameter
C
hlorine
T
& O
P
articulate**
U
SEPA
M
CL
S
tandard No. 42: Aesthetic Effects
I
nfluent
C
hallenge Concentration
2
.0 mg
/L ± 10%
a
t least 10,000 particles/ml
I
nfluent
A
verage
1
.88
mg/L
5
,700,000 #/ml
A
verage
<
0.05136364 mg/L
3
0,583 #/ml
M
aximum
0
.06
mg/L
6
9,000 #/ml
A
verage
>
9
7.26%
9
9.52%
M
inimum
9
6
.84%
9
8.94%
M
in. Required
R
eduction
5
0
%
8
5%
Effluent % Reduction
P
arameter
T
urbidity
Cysts
Asbestos
Lead at pH 6.5
Lead at pH 8.5
Mercury at pH 6.5
Mercury at pH 8.5
Atrazine
Benzene
Carbofuran
p-Dichlorobenzene
Lindane
T
oxaphene
USEPA
M
CL
1
NTU**
99
.5% Reduction
99% Reduction
0.015 mg/L
0.015 mg/L
0.002 mg/L
0.002 mg/L
0.003 mg/L
0.005 mg/L
0.04 mg/L
0.075 mg/L
0.0002 mg/L
0.003 mg/
L
Standard No. 53: Health Effects
Influent
C
hallenge Concentration
1
1 ± 1 NTU***
Minimum 50
,000/L
10
7
10
8
fibers/L; fibers >10 micrometers in length
0.15 mg/L + 10%
0.15 mg/L + 10%
.006 mg/L ± 10%
.006 mg/L ± 10%
0.009 mg/L + 10%
0.015 mg/L ± 10%
0.08 mg/L ± 10%
.225 mg/L ± 10%
0.002 mg/L + 10%
0.0
15
± 10%
Influent
A
verage
1
0.7 NTU
166
,500 #/L
155 MF/L
0.153 mg/L
0.150 mg/L
0.006 mg/L
0.006 mg/L
0.009 mg/L
0.014 mg/L
0.081 mg/L
0.208 mg/L
0.002 mg/L
0.0
15 mg/
L
A
verage
0
.31 NTU
<1
#/L
<1 MF/L
<.001 mg/L
<.001 mg/L
0.0003 mg/L
0.0008 mg/L
<0.002 mg/L
0.0006 mg/L
<0.001 mg/L
<0.0005 mg/L
0.000 mg/L
<
0.00
1 mg/L
M
aximum
.
049 NTU
<1
#/L
<1 MF/L
<.001 mg/L
<.001 mg/L
0.0005 mg/L
0.0015 mg/L
0.002 mg/L
0.0011 mg/L
<0.001 mg/L
<0.0005 mg/L
<0.0001 mg/L
<
0.00
1 mg/L
A
verage
9
7.09%
>9
9.99%
>99.99%
>99.35%
>99.33%
95.70%
86.22%
76.99%
95.71%
98.74%
99.76%
98.72%
92.9
7%
M
inimum
9
5.20%
>9
9.99%
>99.99%
>99.29%
>99.29%
90.91%
75.93%
75.31%
92.14%
98.46%
99.74%
96.50%
9
1.6
7%
Min. Required
R
eduction
0
.5 NTU
>9
9.95%
99%
0.10 mg/L
0.10 mg/L
0.002 mg/L
0.002 mg/L
0.003 mg/L
0.005 mg/L
0.04 mg/L
0.075 mg/L
0.0002 mg/L
0.003 mg/
L
Effluent % Reduction
12828168 JA FD ENG 3/1/06 7:55 AM Page 18
18
WATER FILTER
State of California
Department of Health Services
Water Treatment Device
Certificate Number
03 - 1583
Date Issued: September 16, 2003
Date Revised: April 22, 2004
Trademark /Model Designation Replacement Elements
UKF8001AXX750 UKF8001AXX
469006-750 46 9006
67003523-750 67003523
Manufacturer: PentaPure Inc.
The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section 116830 of the
Health and Safety Code for the following health related contaminants:
Microbiological Contaminants and Turbidity Inorganic/Radiological Contaminants
Cysts Asbestos
Turbidity Lead
Mercury
Organic Contaminants
Atrazine
Lindane
Benzene
Carbofuran
p-dichlorobenzene
T
oxaphene
Rated Service Capacity: 750 gal. Rated Service Flow: 0.78 gpm
Conditions of Certification:
Do not
use where water is microbiologically unsafe or with water of unknown quality, except that systems certified for cyst
reduction may be used on disinfected waters that may contain filterable cysts.
12828168 JA FD ENG 3/1/06 7:55 AM Page 19
19
FOOD STORAGE TIPS
Fresh Food Storage
The fresh food compartment of a refrigerator should
be kept between 34°-40° F (1°-4° C) with an
optimum temperature of 37° F (3° C). To check the
temperature, place an appliance thermometer in a
glass of water and place in the center of the
refrigerator. Check after 24 hours. If the temperature
is above 40° F (4° C) adjust the controls as explained
on pages 9-11.
Avoid overcrowding the refrigerator shelves. This
reduces the circulation of air around the food and
results in uneven cooling.
Fruits and Vegetables
Storage in the crisper drawers traps humidity to help
preserve the fruit and vegetable quality for longer
time periods (see pages 12-13).
Sor
t fruits and vegetable
s
before storage and use
bruised or soft items first. Discard those showing
signs of decay.
Always wrap odorous foods such as onions and
cabbage so the odor does not transfer to other foods.
While vegetables need a certain amount of humidity
to remain fresh, too much humidity can shorten
storage times (especially leafy vegetables). Drain
vegetables well
before storing.
Wait to wash fresh produce until right before use.
Meat and Cheese
Raw meat and poultry should be wrapped securely
so leakage and contamination of other foods or
surfaces does not occur.
Occasionally mold will develop on the surface of
hard chee
se
s (S
wiss, Cheddar
, Parmesan). Cut off at
least an inch around and below the moldy area. K
eep
your knife or instrument out of the mold it
self.
Do
not try to save individual cheese slices, soft cheese,
cottage cheese, cream, sour cream or yogurt when
mold appears.
Dairy Food
Most dairy foods such as milk, yogurt, sour cream
and cott
age chee
se have fre
shne
ss dates on their
c
ar
tons for appropriate length of storage. Store the
se
foods in the original carton and refrigerate
immediately after purchasing and after each use.
Frozen Food Storage
The freezer compartment of a refrigerator should be
kept at approximately 0° F (-17° C). To check the
temperature, place an appliance thermometer
between the frozen packages and check after 24
hours. If the temperature is above 0° F (-17° C),
adjust the control as described on pages 9-11.
A freezer operates more efficiently when it is at least
two-thirds full.
Packaging Foods for Freezing
To minimize dehydration and quality deterioration use
aluminum foil, freezer wrap, freezer bags or airtight
containers. Force as much air out of the packages as
possible and be sure they are tightly sealed. Trapped
air can cause the food to dry out, change color and
develop an off-flavor (freezer burn).
Overwrap fre
sh meats and poultry with suitable
freezer wrap prior to freezing.
Do not refreeze meat that has completely thawed.
Loading the Freezer
Avoid adding too much warm food to the freezer at
one time. This overloads the freezer, slows the rate of
freezing and can raise the temperature of frozen
foods.
Leave space between the packages so cold air can
circulate freely
, allowing food to freeze as quickly as
possible.
Avoid storing hard-to-freeze foods such as ice cream
and orange juice on the freezer door shelves. These
foods are best stored in the freezer interior where the
temperature varies less with door openings.
Refer to the
Food Storage Chart on page
s
20
and
21 for
approximate storage time
s.
12828168 JA FD ENG 3/1/06 7:55 AM Page 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Jenn-Air JFD2589KEP Manuel utilisateur

Catégorie
Frigos
Taper
Manuel utilisateur