Winmate W15FA3S-EHA2 Guide de démarrage rapide

Please read these instructions carefully before using this product, and save this manual for future use

E-Series HMI

Ubuntu 16.04

W04FA3S-EHT1

W07FA3S-EHT1

W10FA3S-EHH2

W15FA3S-EHA2

Quick Start Guide

V1.0

For more information on this

and other Winmate products,

please visit our website at:

www.winmate.com

Document part number: 9152111I102O

- 2 -

CONTENTS

INTRODUCTION ........................................................................... - 8 -

Features - 8 -

Package Contents - 9 -

Product Overview - 10 -

GETTING STARTED ................................................................... - 14 -

Turning On Your Device - 14 -

Connecting to Other Devices - 15 -

Turning Off Your Device - 19 -

OPERATING THE DEVICE ......................................................... - 20 -

Start Menu - 20 -

Linux Terminal - 21 -

System Information - 22 -

Brightness Adjustment - 23 -

Ethernet Settings - 24 -

Changing Serial Port Settings - 27 -

Exit the System - 28 -

INSTALLATION .......................................................................... - 29 -

Wiring Requirements - 29 -

Mounting Solution - 30 -

SPECIFICATIONS ....................................................................... - 32 -

Hardware Specifications - 32 -

APPENDIX .................................................................................. - 34 -

Appendix A: Cleaning the Monitor - 34 -

Appendix B: Winmate Software Development Kit - 35 -

Appendix C: Ubuntu Command Code - 36 -

- 3 -

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two

conditions:

 This device may not cause harmful

interference.

 This device must accept any interference

received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the

limits for a class "B" digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at him

own expense.

- 4 -

European Union

Electromagnetic Compatibility Directive

(2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/

A2:2013

This equipment is in conformity with the requirement of the

following EU legislations and harmonized standards. Product also

complies with the Council directions.

- 5 -

Copyright Notice

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical,

for any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks

of their respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to

any product, including circuits and/or software described or

contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of

the described product(s) conveys no license or title under any patent,

copyright, or masks work rights to these products, and make no

representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise

specified. Applications that are described in this manual are for

illustration purposes only. We make no representation or guarantee

that such application will be suitable for the specified use without

further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be

free from material and workmanship defects for a period of one year

from the invoice date. If the customer discovers a defect, we will, at

his/her option, repair or replace the defective product at no charge to

the customer, provide it is returned during the warranty period of one

year, with transportation charges prepaid. The returned product must

be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the

shipping date. In the serial numbers the third and fourth two digits

give the year of manufacture, and the fifth digit means the month (e.

g., with A for October, B for November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of

year 2016.

- 6 -

Customer Service

We provide a service guide for any problem by the following steps:

First, visit the website of our distributor to find the update information

about the product. Second, contact with your distributor, sales

representative, or our customer service center for technical support if

you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers

every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

- 7 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden

power surges. Only experienced electronics personnel

should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis

lorsque vous travaillez sur celui-ci. Ne pas brancher de

connections lorsque l’alimentation est présente. Des

composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement

du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge

before touching the CPU card. Modern electronic devices

are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place

all electronic components in a static-dissipative surface

or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute

charge statique avant de toucher la carte CPU. Les

équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer

toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-

statique lorsqu’elles ne sont pas dans le chassis.

- 8 -

INTRODUCTION

Congratulations on purchasing Winmate® E-Series HMI. Winmate®

continues developing new generation of Human Machine Interfaces

for Industry 4.0 and Internet of Things (IoT). Our E-Series HMI runs

on Ubuntu operating system that allows installing the latest

applications (APPs). Thereby wide customization possibilities are

available to satisfy the needs of industrial automation.

There is one USB 2.0 onboard to connect mouse or keyboard, USB

OTG for system updates and micro SD card for data logging,

backup or data storage. System memory of 1 GB ensures stable

operation of applications.

With mounting clips for panel mounting there is no need to drill

holes in a fixture. This saves you the time for mounting and

guarantee aesthetic look of the wall after the unit gets removed.

Features

Winmate® E-Series HMI features:

 Freescale® Cortex® A9 i.MX6 Dual Core 1 GHz

 Projected Capacitive (P-CAP) Multi-Touch

 Fanless cooling system and Ultra-low power consumption

 Front IP65 water and dust proof, rear IP22

 Power over Ethernet (Data and Power in a single cable)

 Mounting clips for quick Installation

 Elegant design for room booking, access control and room

information applications

 Ubuntu 16.04 OS

- 9 -

Package Contents

Carefully remove the box and unpack your device. Please check if

all the items listed below are inside your package. If any of these

items are missing or damaged contact us immediately.

Standard factory shipment list:

HMI Device

Quick Start

Guide

(Hardcopy)

User Manual

& Driver CD

USB to Micro

USB Cable

Varies by product

specifications

Varies by product

specifications

Varies by product

specifications

9487049050K0

AC Adapter

(12V/ 50W)

Power Cord

2 pin

Terminal

Block

Mini USB to

UART Cable

(For Linux use)

922D050W12A

Varies by country

94J602G020K0

94E7053090K0

Mounting

Clips and

Screws

82111E240400

*Package content may vary based on your order.

- 10 -

Product Overview

E-Series HMI 4.3”

Unit: mm

№

Description

№

Description

①

USB OTG

④

Micro HDMI

②

USB 2.0

⑤

LAN/ Optional PoE

③

RS485

⑥

12V DC in (Power jack)

- 11 -

E-Series HMI 7”

Unit: mm

№

Description

№

Description

①

Mini USB Console

(Linux use)

⑥

CANBUS

②

Micro SD

⑦

Micro HDMI

③

LAN/ Optional PoE

⑧

USB 2.0

④

USB OTG

⑨

12V DC in (Phoenix type)

⑤

RS-232/422/485

- 12 -

E-Series HMI 10.1”

Unit: mm

№

Description

№

Description

①

Mini USB Console

(Linux use)

⑥

CANBUS

②

Micro SD

⑦

Micro HDMI

③

LAN/ Optional PoE

⑧

USB 2.0

④

USB OTG

⑨

12V DC in (Phoenix type)

⑤

RS-232/422/485

- 13 -

E-Series HMI 15.6”

Unit: mm

№

Description

№

Description

①

Mini USB Console

(Linux use)

⑥

CANBUS

②

Micro SD

⑦

Micro HDMI

③

LAN/ Optional PoE

⑧

USB 2.0

④

USB OTG

⑨

12V DC in (Phoenix type)

⑤

RS-232/422/485

- 14 -

GETTING STARTED

Turning On Your Device

This section describes how to turn on / off the Access Control HMI

device.

Follow the following steps to turn on your HMI device:

1. Connect a 2-pin terminal block to the HMI connector.

2. Connect the other side of the terminal block to the AC adapter.

3. Connect the AC adapter to the power cord.

4. Plug the power cord to the AC outlet and the device will turn

on automatically.

CAUTION

Use only the AC adapter included in your package

(Rating: Output 4.2 A). Using other AC adapters may

damage the device.

*For 4.3” HMI connect AC Adapter to DC power jack.

ALTERNATING CURRENT

This product must be grounded. Use only a grounded

AC outlet. Install the additional PE ground wire if the

local installation regulations require it.

- 15 -

Connecting to Other Devices

DC Input Connector

Power Jack

DC power source input for 4.3” HMI is power jack.

Terminal Block

DC power source input for 7”/ 10.1”/ 15.6” is 2-pin terminal block

connector that requires maximum voltage 12V.

Serial Port Connector

Use serial port connector to connect your HMI to external devices

such as mouse, modem or printer.

RS-232/422/485

Serial port settings

can be configured

in Winmate

application for

Android OS.

Refer to “Changing Serial Port Settings” of this manual for more

details.

Pin №

Name

1

12V

2

GND

Voltage

Minimum Voltage 11.4V

Maximum Voltage 12.6V

Maximum Current 4.2A

Pin №

RS-232

(Default)

RS-422

RS-485

1

DCD

TxD-

D-

2

RXD

TxD+

D+

3

TXD

RxD+

NC

4

DTR

RxD-

NC

5

GND

6

DSR

NC

7

RTS

NC

8

CTS

NC

9

RI

NC

- 16 -

RS-485

LAN (RJ45) Connector

The E-Series HMI supports one 10/100/1000 Mbps Ethernet interface

for connecting to the internet.

IMPORTANT:

Supports PoE (Optional).

Power Device (PD) follows IEEE 802.3at (25W).

Pin №

RS-485

1

D-

2

D+

3

NC

4

NC

5

GND

6

NC

7

NC

8

NC

9

NC

Pin №

Signal

Name

№

Signal Name

1

TX1+

2

TX1-

3

TX2+

4

TX2-

5

TX3+

6

TX3-

7

TX4+

8

TX4-

- 17 -

Micro HDMI Connector

The E-Series HMI has one Micro HDMI connector.

Pin №

Signal Name

Pin №

Signal Name

1

HP_DET_OU

T

2

NC

3

HDMI_D2P

4

GND

5

HDMI_D2M

6

HDMI_D1P

7

GND

8

HDMI_D1M

9

HDMI_D0P

10

GND

11

HDMI_D0M

12

HDMI_CLKP

13

GND

14

HDMI_CLKM

15

HDMI_CEC_

OUT

16

GND

17

H_CLK_OUT

18

H_DAT_OUT

19

HDMI_5V

- 18 -

USB A Type Connector

Use USB A Type (USB2.0) connector to connect your HMI device to

other USB2.0 compatible devices.

USB OTG Connector

Use USB OTG connector to connect the HMI device to other external

devices. Use USB OTG cable to install software on the HMI device.

Refer to the E-Series

HMI User Manual for

more details on how to

install software.

CANBus Connector

Use CANBus connector for the HMI machine-to-machine

communication.

*PIN9 default is NC

Pin №

Signal Name

Pin №

Signal

Name

1

+5V

2

USB_D-

3

USB_D+

4

GND

Pin №

Signal Name

Pin №

Signal Name

1

+5V

2

USB_OTG_D

-

3

USB_OTG_D

+

4

USB_OTG_ID

5

GND

Pin №

Signal Name

Pin №

Signal Name

1

GND

2

CAN_L

3

GND

4

NC

5

NC

6

NC

7

CAN_H

8

GND

9*

+5V/NC

- 19 -

Turning Off Your Device

To turn off the HMI device:

1. Click the lower right Logout button on the desktop .

2. Choose Shut Down option to shut down the HMI device.

3. Disconnect the HMI device from the power source (if

necessary).

- 20 -

OPERATING THE DEVICE

Your HMI supports Linux Ubuntu 16.04 operating system. This

section describes how to get started with Ubuntu 16.04 and basic

settings.

For more advanced Ubuntu settings, please click here to download

SDK from Winmate Download Center.

Start Menu

1. Click the lower left Start button on the desktop to expand

Start Menu.

2. Click Preferences and select required program.

La page charge ...

Winmate W15FA3S-EHA2 Guide de démarrage rapide

Ce manuel convient également à

Winmate W15FA3S-EHA2 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents