Winmate W07FA3S-PCO1AC-POE Guide de démarrage rapide

Please read these instructions carefully before using this product, and save this manual for future use.

15” S-Series HMI

Ubuntu 16.04

R15FA3S-PCC3-PoE

Quick Start Guide

V1.0

For more information on this and

other Winmate products, please

visit our website at:

www.winmate.com

- 2 -

CONTENTS

INTRODUCTION - 8 -

Features - 8 -

Package Contents - 9 -

Product Overview - 11 -

INSTALLATION - 12 -

Wiring Requirements - 12 -

Connecting to Other Devices - 13 -

GETTING STARTED - 15 -

Turning On Your Device - 15 -

Turning Off Your Device - 16 -

OPERATING THE DEVICE - 17 -

Start Menu - 17 -

Linux Terminal - 18 -

System Information - 19 -

Brightness Adjustment - 20 -

Ethernet Settings - 21 -

Changing Serial Port Settings - 24 -

Exit the System - 25 -

MOUNTING - 26 -

Panel Mounting - 26 -

VESA Mounting - 26 -

SPECIFICATIONS - 34 -

APPENDIX - 37 -

Appendix A: Cleaning the Monitor - 37 -

Appendix B: Winmate Software Development Kit - 38 -

Appendix C: Ubuntu Command Code - 39 -

- 3 -

FCC Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two

conditions:

 This device may not cause harmful

interference.

 This device must accept any interference

received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the

limits for a class "B" digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at him

own expense.

- 4 -

European Union

Electromagnetic Compatibility Directive

(2014/30/EU)

 EN55024: 2010/ A1: 2015

o IEC61000-4-2: 2009

o IEC61000-4-3: 2006+A1: 2007+A2: 2010

o IEC61000-4-4: 2012

o IEC61000-4-5: 2014

o IEC61000-4-6: 2014

o IEC61000-4-8: 2010

o IEC61000-4-11: 2004

 EN55032: 2012/AC:2013

 EN61000-3-2:2014

 EN61000-3-3:2013

Low Voltage Directive (2014/35/EU)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011/

A2:2013

This equipment is in conformity with the requirement of the

following EU legislations and harmonized standards. Product also

complies with the Council directions.

- 5 -

Copyright Notice

No part of this document may be reproduced, copied, translated, or

transmitted in any form or by any means, electronic or mechanical, for

any purpose, without the prior written permission of the original

manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of

their respective owners.

Disclaimer

Winmate Inc. reserve the right to make changes, without notice, to

any product, including circuits and/or software described or contained

in this manual in order to improve design and/or performance. We

assume no responsibility or liability for the use of the described

product(s) conveys no license or title under any patent, copyright, or

masks work rights to these products, and make no representations or

warranties that these products are free from patent, copyright, or

mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We

make no representation or guarantee that such application will be

suitable for the specified use without further testing or modification.

Warranty

Winmate Inc. warranty guarantees that each of its products will be

free from material and workmanship defects for a period of one year

from the invoice date. If the customer discovers a defect, we will, at

his/her option, repair or replace the defective product at no charge to

the customer, provide it is returned during the warranty period of one

year, with transportation charges prepaid. The returned product must

be properly packaged in its original packaging to obtain warranty

service. If the serial number and the product shipping data differ by

over 30 days, the in-warranty service will be made according to the

shipping date. In the serial numbers the third and fourth two digits

give the year of manufacture, and the fifth digit means the month (e.

g., with A for October, B for November and C for December).

For example, the serial number 1W16Axxxxxxxx means October of

year 2016.

- 6 -

Customer Service

We provide a service guide for any problem by the following steps:

First, visit the website of our distributor to find the update information

about the product. Second, contact with your distributor, sales

representative, or our customer service center for technical support if

you need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers

every business day. We are always ready to give advice on

application requirements or specific information on the installation and

operation of any of our products.

- 7 -

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden

power surges. Only experienced electronics personnel

should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis

lorsque vous travaillez sur celui-ci. Ne pas brancher de

connections lorsque l’alimentation est présente. Des

composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement

du personnel expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge

before touching the CPU card. Modern electronic devices

are very sensitive to static electric charges. As a safety

precaution, use a grounding wrist strap at all times. Place

all electronic components in a static-dissipative surface

or static-shielded bag when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute

charge statique avant de toucher la carte CPU. Les

équipements électroniques moderns sont très sensibles

aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer

toutes les composantes électroniques sur une surface

conçue pour dissiper les charge, ou dans un sac anti-

statique lorsqu’elles ne sont pas dans le chassis.

- 8 -

INTRODUCTION

Congratulations on purchasing Winmate® 15” S-Series HMI.

Interactive and smart automation systems of intelligent buildings are

in a fast growing phase. Winmate multi-touch S-Series HMI is suitable

for home automation and room management systems.

Flat surface is easy-to-clean and delivers aesthetically pleasing look

for any interior. By connecting to centralized database, it can provide

real time update for booking status and available schedule, or

perform as a synchronous display in meetings. Optional NFC is

especially useful in access control applications.

S-Series HMI runs on Freescale® Cortex® A9 i.MX6 Dual Core 1GHz

(optional Quad Core) processor and support Ubuntu 16.04 operating

systems. The HMI device features P-Cap touch-screen. These

models designed with front IP 65 dust and water proof, and IP22 on

the back side.

Features

Winmate® 15” S-Series HMI features:

 15'' 1024 x 768 Resolution with P-Cap multi-touch screen

 Freescale® Cortex® A9 i.MX6 Dual Core 1GHz (optional Quad

Core)

 Ubuntu 16.04 OS

 PoE standard IEEE 802.3at (25 W)

 Fanless cooling system and ultra-low power consumption

 Room booking schedule, access control, room information

display

 Front IP65 water and dust proof

 Optional LED Status Light Bar indicators on both sides

 Optional NFC Reader

 Optional 2MP Front Camera

- 9 -

Package Contents

Carefully remove the box and unpack your device. Please check if all

the items listed below are inside your package. If any of these items

are missing or damaged contact us immediately.

Standard factory shipment list:

15” HMI Device

Quick Start Guide

(Hardcopy)

Driver CD & User

Manual

Varies by product

specifications

Varies by product

specifications

9171111I102P

AC Adapter

(12V/ 50W)

Power Cord

Terminal Block 2

922D050W12VA

Varies by country

94J602G020K0

- 10 -

Package may include optional accessories based on your order:

VESA Desk Stand

LA-100

VESA Wall Mount

Bracket

LA-106

9B0000000128

9B0000000412

- 11 -

Product Overview

Unit: mm

№

Description

№

Description

①

Console Port (for Linux)

⑥

USB 2.0 x 1

②

Micro SD Card Slot

⑦

12V DC

③

LAN/ PoE

⑧

1 Watt Speaker

④

USB OTG

⑨

NFC Reader (Optional)

⑤

RS-232/422/485

- 12 -

INSTALLATION

Wiring Requirements

The following common safety precautions should be observed before

installing any electronic device:

 Strive to use separate, non-intersecting paths to route power

and networking wires. If power wiring and device wiring paths

must cross make sure the wires are perpendicular at the

intersection point.

 Keep the wires separated according to interface. The rule of

thumb is that wiring that shares similar electrical characteristics

may be bundled together.

 Do not bundle input wiring with output wiring. Keep them

separate.

 When necessary, it is strongly advised that you label wiring to

all devices in the system.

CAUTION

 Do not run signal or communication wiring and power wiring in

the same conduit. To avoid interference, wires with different

signal characteristics (i.e., different interfaces) should be routed

separately.

 Be sure to disconnect the power cord before installing and/or

wiring your device.

 Verify the maximum possible current for each wire gauge,

especially for the power cords. Observe all electrical codes

dictating the maximum current allowable for each wire gauge.

 If the current goes above the maximum ratings, the wiring could

overheat, causing serious damage to your equipment.

 Be careful when handling the unit. When the unit is plugged in,

the internal components generate a lot of heat which may leave

the outer casing too hot to touch.

- 13 -

Connecting to Other Devices

Power Input Connector

The DC power source input of the 7” S-Series HMI is a 2 pin terminal

block connector that supports 12V DC power input.

Serial Port Connector

The 7” S-Series HMI has one serial port connector to connect your

HMI to external devices such as mouse, modem or printer. You can

configure serial port settings via APP.

USB 2.0 Connector

Use USB A Type (USB 2.0) connector to connect your HMI device

to other USB 2.0 compatible devices.

Voltage

Minimum Voltage 11.4V

Maximum Voltage 12.6V

Maximum Current 4.2A

Pin №

RS-232

(Default)

RS-422

RS-485

1

DCD

TxD-

D-

2

RXD

TxD+

D+

3

TXD

RxD+

NC

4

DTR

RxD-

NC

5

GND

6

DSR

NC

7

RTS

NC

8

CTS

NC

9

RI

NC

№

Signal

Name

№

Signal

Name

1

+5V

2

USB_D-

3

USB_D+

4

GND

- 14 -

Ethernet Connector

The 7” S-Series HMI supports one RJ45 10/100/1000 Mbps Ethernet

interface for connecting to the internet.

IMPORTANT:

Power Device (PD):

IEEE 802.3at (25 W), IEEE 802.3af (15 W)

USB OTG Connector

Use USB OTG connector to connect the HMI device to other USB

On-The-Go compliant devices such as flash drives, digital cameras,

mice or keyboards. Use USB OTG cable to install software on the

HMI device.

Refer to the User Manual

for more details on how to

install software.

Micro SD Card Slot

Insert microSD card to microSD card slot to extend the memory of

your HMI device.

№

Signal

Name

№

Signal

Name

1

TX1+

2

TX1-

3

TX2+

4

TX2-

5

TX3+

6

TX3-

7

TX4+

8

TX4-

№

Signal

Name

Pin №

Signal Name

1

+5V

2

USB_OTG_D-

3

USB_OTG_

D+

4

USB_OTG_ID

5

GND

№

Signal

Name

Pin №

Signal Name

1

DATA2

2

DATA3

3

CMD

4

+3.3V

5

CLK

6

GND

7

DATA0

8

DATA1

9

Card_Det

- 15 -

GETTING STARTED

Turning On Your Device

Follow the following steps to turn on your device:

1. Connect the HMI device to a thermal block (2-pin).

2. Connect the other side of the thermal block to the AC adapter.

3. Connect the AC adapter to the power cord.

4. Plug in the power cord to a working AC wall outlet. The device

will boot automatically.

CAUTION

Use only the AC adapter included in your package.

Using other AC adapters may damage the device.

ALTERNATING CURRENT

This product must be grounded. Use only a grounded

AC outlet. Install the additional PE ground wire if the

local installation regulations require it.

- 16 -

Turning Off Your Device

To turn off the HMI device:

1. Click the lower right Logout button on the desktop .

2. Choose Shut Down option to shut down the HMI device.

3. Disconnect the HMI device from the power source (if

necessary).

- 17 -

OPERATING THE DEVICE

Your HMI supports Linux Ubuntu 16.04 operating system. This

section describes how to get started with Ubuntu 16.04 and basic

settings.

For more advanced Ubuntu settings, please click here to download

SDK from Winmate Download Center.

Start Menu

1. Click the lower left Start button on the desktop to expand

Start Menu.

2. Click Preferences and select required program.

- 18 -

Linux Terminal

1. Click on the Start button at the bottom left side of the

desktop, in drop-down menu choose System Tools >

LXTerminal.

2. You are in Linux Ubuntu terminal.

- 19 -

System Information

1. Open Linux Terminal, enter command code to check OS and

CPU information.

To find System Information command code, please refer to Appendix

C of this manual.

- 20 -

Brightness Adjustment

1. Open Linux Terminal, enter command code to change brightness

settings.

2. brightness.png -> Use “echo” and “cat” command to control the

backlight of the LCD panel. The range is 0 (lowest brightness) to 7

(highest brightness).

To find Brightness adjustment command code, please refer to

Appendix C of this manual.

La page charge ...

Winmate W07FA3S-PCO1AC-POE Guide de démarrage rapide

Ce manuel convient également à

Winmate W07FA3S-PCO1AC-POE Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents