Krups XP320050 Manuel utilisateur

XP3200

www.krups.com

EN

FR

ES

www.krups.com

8000828507-02

EN . . . . . . . . . . . . . . . . . p.5

FR . . . . . . . . . . . . . . . p. 23

ES . . . . . . . . . . . . . . . p. 41

Réalisation : Espace Graphique

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:42 PageC1

K

R

U

P

S

Fig.1 Fig.2 Fig.3

Fig.4 Fig.5 Fig.6

Fig.7 Fig.8 Fig.9

Fig.10 Fig.11 Fig.12

K

R

U

P

S

K

R

U

P

S

U

P

S

U

P

S

K

R

U

P

S

K

R

U

P

S

K

R

U

P

S

K

R

U

P

S

Fig.13 Fig.14 Fig.15

Fig.16 Fig.17 Fig.18

FECHA DE COMPRA :

CANADA

GROUPE SEB

CANADA

345 Passmore

Avenue

Toronto, ON

M1V 3N8

MEXICO

GROUPE SEB

MEXICO

S.A. de C.V.

Goldsmith 38 Desp.

401 Col. Polanco

Delegacion Miguel

Hildalgo

11 560 Mexico D.F.

MEXICO

U.S.A.

GROUPE SEB

USA

2121 Eden Road

Millville, NJ

08332

1-800-418-3325

01800 1128325

800-526-5377

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:42 PageC4

English

TABLE OF CONTENTS

1. DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 9

2. TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . p. 9

3. TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 10

4. BEFORE FIRST USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 10

5. MAKING AN ESPRESSO. . . . . . . . . . . . . . . . . . . . . . . . . p. 11

6. MILK FROTHING FUNCTION . . . . . . . . . . . . . . . . . . . . . p. 12

7. CLEANING AND MAINTENANCE . . . . . . . . . . . . . . . . . . p. 14

8. DESCALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 15

9. PROBLEMS, PROBABLE CAUSES

AND CORRECTIVE ACTIONS. . . . . . . . . . . . . . . . . . . . . p. 16

10. DISPOSING OF YOUR MACHINE. . . . . . . . . . . . . . . . p. 19

11. KRUPS MANUFACTURER WARRANTY . . . . . . . . . . . p. 20

5

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page5

English

6

IMPORTANT

SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed to reduce the risk of fire, electric

shock, and/or injury to persons including the following :

1. Read all instructions prior to first use.

2. Do not touch hot surfaces. Use handles or knobs.

3. To protect against fire, electric shock and injury to

persons, do not immerse cord, plugs or machine in water

or other liquid.

4. Not intented for use by children.

5. Close supervision is necessary when any machine is used

near children. Keep machine out of reach of children.

6. This appliance is not designed to be used by people

(including children) without prior knowledge or experience

with the machine, unless they are supervised or given prior

instructions concerning the use of the appliance by

someone responsible for their safety.

7. Children must be supervised to ensure that they do not

play with the appliance.

8. Burns can occur from touching the hot plate, hot water or

steam. Exercise caution.

9. Exercise caution when using the steam nozzle as steam

can cause scalding.

10. Unplug machine from outlet when not in use and when

cleaning. Allow to cool before putting on or taking off

parts, before cleaning the machine, and before storing.

11. All machines are subject to stringent quality control.

Practical tests using machines taken at random are

conducted and this may explain any slight marks or coffee

residue prior to use.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page6

English

12. Do not operate any machine with a damaged cord or plug

or after the machine malfunctions, or has been damaged

in any manner. Return machine to the nearest Krups

Service Center for examination, repair or adjustment or

your respective countries Consumer Service Department.

13. To reduce the risk of injury do not drape cord over the

counter top or table top where it can be pulled on by

children or tripped over accidentally.

14. Do not let cord hang over edge of table or counter, or

touch hot surfaces.

15. The use of accessory attachments not recommended by

Krups may result in fire, electric shock or injury to persons.

16. Do not use outdoors.

17. Do not place on or near a hot gas or electric burner, or in

a heated oven.

18. To disconnect the machine, turn the control to “off” then

remove plug from wall outlet. Do not yank cord, instead

grasp plug and pull to disconnect.

19. Do not use the machine for other than intended use.

20. Do not pour liquids other than water and descaling

solutions specified in this manual into the water tank.

21. Protect the machine against humidity and freezing.

22. This machine is for household use only.

SAVE THESE

INSTRUCTIONS

7

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page7

English

8

CAUTION

This machine is intended for household use only. Any servicing

other than cleaning and user maintenance should be

performed by the nearest authorized Krups Service Center.

Visit our website at www.krupsusa.com in the USA or

www.krups.ca in Canada or contact your respective country's

Consumer Service department for the service center nearest to

you, or contact your respective country’s Consumer Service

department.

To reduce the risk of fire or electric shock, do not attempt to

disassemble the machine. Repair should be done by an

authorized Krups Service Center only.

SHORT CORD INSTRUCTIONS

A. We do not recommend using an extension cord with

this device.

B. If an extension cord is absolutely necessary,

1) the marked electrical rating of the extension cord

should be at least as great as the electrical rating

of the machine,

2) the longer cord should be arranged so that it will

not drape over the counter top or table top where

it can be pulled on by children or tripped over.

C. This machine has a polarized plug (one blade is

wider than the other). To reduce the risk of electric

shock, this plug is intended to fit into a polarized

outlet only one way. If the plug does not fit fully into

the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do not attempt to

modify the plug in any way.

In the interest of improving products, Krups reserves the

right to change specifications without prior notice.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page8

English

1. DESCRIPTION

2. TECHNICAL CHARACTERISTICS

n Pump: 15 bars

n Filter holder 1 cup, 2 cups.

n Steam function

n Removable water tank (capacity: 0,8 litres)

n Power: 1250 W

n Voltage:120 V – 60 Hz

n Anti overheating safety mechanisms

n Dimensions: H 11.2 in., L 8.1 in., W 15.9 in.

IMPORTANT!

Operating voltage: This device is designed to work only at

alternating current 120V.

Type of use: This machine is designed EXCLUSIVELY for

household use only. Any non-residential use including

commercial purposes will void the warranty.

9

a. Water compartment lid

b. Detachable water compartment

c. Filter storage

c1. Filter for ground coffee

(1 cup) and soft pod.

c2. Filter for ground coffee

(2 cups)

d. Measuring spoon

e. Cup tray

f. On/off switch

g. On / off indicator light (red)

h. Coffee function switch

h1. Espresso reheating

position

h2. Espresso position

h3. Coffee indicator light

(green)

i. Steam function selector switch

i1. Position O

i2. Steam reheating

position

i3. Steam position

i4. Steam indicator light

(green)

j. Filter holder

k. Steam nozzle

l. Drip tray grid

m. Drip tray

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page9

English

10

3. TIPS

n To extract the fullest flavor from your beans, we recommend using

whole coffee beans that have been freshly ground each time espresso

is prepared. Take care to make sure your coffee is ground to the proper

size for espresso. Too fine a grind will result in espresso that is over-

extracted and bitter. Too coarse a grind will result in espresso that is

under-extracted and weak in flavor. The perfect espresso grind will feel

like fine grains that do not clump when pressed together.

n Store your espresso grounds in an airtight container, and in a cool, dry

place to retain the flavor. Grounds should not be kept for long periods

of time as the flavor will be reduced over time.

n Do not fill your filter holder to the brim. Using the measuring spoon

included, use 1 level spoon of grounds per shot of espresso.

n If you do not use the machine for more than 5 consecutive days, rinse

and drain the water tank.

n Before removing the water tank to fill or empty it, always turn the

machine off.

n Always place the unit on a flat, stable, heat-resistant work surface.

n To obtain an espresso at exactly the right temperature, we recommend

that you preheat your cups.

IMPORTANT!

Before using for the first time, after a prolonged period

of inactivity or after descaling, the machine must be

cleaned as described in Section 4: “BEFORE FIRST

USE”.

4. BEFORE USING FOR THE FIRST TIME

Before using your espresso machine for the first time, clean all the

accessories in soapy water and dry them.

Rinse them as follows:

n Open the lid (a) and remove the water tank using the handle (fig. 1).

n Fill the tank (b) with cold water and place it firmly on the machine,

making sure it is firmly in place, and close the lid (fig. 2 and 3).

n Insert and turn the filter holder to the right (fig 7).

n Place a container of sufficient volume under the filter holder.

n Plug the appliance in and turn it on (fig. 4).

n Wait for the green light to turn on (h3).

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page10

English

n Turn the Coffee function selector (h) to the position (h2) and let

all the water in the tank drain out (Fig. 5). During this first use, the

system must fill up and the water does not flow immediately.

n If necessary, to empty the water from the container, you can interrupt

the flow by turning the coffee function selector switch (h) to the

position (h1). Once all of the water from the tank has emptied into

the container, turn the coffee function selector to the (h1) position.

5. MAKING AN ESPRESSO

IMPORTANT : Always check before starting a cycle to see

that there is sufficient water in the water tank. Avoid

allowing the tank to run dry when operating the machine.

WITH ESPRESSO GROUND COFFEE:

n Fill the tank with cold water and place it firmly on the machine,

making sure it is firmly in place, (fig. 1, 2 and 3).

n Place the filter (c.1) for 1 cup or the filter (c.2) for 2 cups in the filter

holder (j) (fig. 6).

n using the measuring spoon (d), fill the filter with ground coffee.

(1 dose = 1 cup, 2 doses = 2 cups) in the filter. (fig 8, 9)

n Remove the coffee which remains around the filter.

n Insert and turn the filter holder to the right (fig 7).

n Place one or two espresso cups under the filter holder.

As soon as the device reaches the required temperature, the green light

(h3) will turn on.

n Turn the coffee function selector switch (h) to the position (h2).

n When the cups are filled to your liking, turn the switch to the

position (h1).

n Remove the filter holder by turning it to the left .

n To eject the spent coffee, turn the filter holder over, holding the filter

by the tab so that the spent coffee falls out (fig 11).

For the best results, we recommend that you preheat the accessories

(filter holder, filter and cups) following the steps above without using

ground coffee.

Warning! Do not remove the Filter holder when the Cof-

fee function selector switch (h) is in the position (h2),

and the coffee is flowing.

11

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page11

English

12

WITH SOFT PODS:

Besides coffee, this machine can also work with espresso ground cof-

fee pods.

n Place the espresso pod in the filter (c1).

n Be sure to place all the paper inside the filter holder, to avoid

leaks and get a good result in the cup.

n Insert and turn the filter holder to the right (fig.7).

n Then follow the procedure for preparing an espresso with espresso

ground coffee.

6. MILK FROTHING FUNCTION

n Steam can be used to froth milk for cappuccinos and latte.

n As the machine produces steam, the operating pump will make a

sound.

n After using the steam function, the machine purges

automatically and cools down by pumping cold water through the

heating system. During the purging cycles of cold water, the excess

steam in the heating system is released with hot water into the drip

tray.

n The steam and noise that accompany this phase is important for

cooling the machine.

Caution: During and after using the steam wand, the

metal parts of the steam wand can become very hot.

Take care when handling the steam wand to avoid injury.

SYSTEMATIC PURGE OF THE STEAM CIRCUIT:

Each time before you make frothy milk, you must purge the steam

circuit:

n Place an empty container under the steam nozzle (k).

n Turn the steam function selector switch (i) to the position (i2)

(fig. 12). The steam light (i4) lights up.

n Turn the steam function selector switch (i) to the position (i3)

(fig. 13) in order to purge the circuit.

n When all the water inside the circuit has been emitted, turn the steam

function selector switch (i) back to the to the position (i2). (fig. 12)

(i2).

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page12

English

n Remove and empty the container.

n Your device is ready to froth milk.

USING THE STEAM NOZZLE TO FROTH MILK

n Fill the water tank with fresh cold water to the maximum line and turn

the machine on (fig.1, 2, 3 and 4).

n Turn the dial (i) to the (i2) position (fig. 12). The steam light (i4)

turns on.

n Position the steam nozzle so that it points away from the machine.

n Pour 2 to 3 oz (1/4 – 1/3 cup) of fresh milk in a small container that

is short enough to fit under the steam nozzle. Both the milk and the

container should be cold for optimum results.

n Pasteurised or UHT milk is recommended. Whole, lowfat, or skim

milk can all be frothed.

n As soon as the preheating indicator light stops blinking, plunge the

steam nozzle into the milk.

n Turn the dial to the position (fig.13).

n For optimal results, froth from the bottom of the container and slowly

move upwards. Hold the nozzle towards the bottom of the container

without touching the bottom for about 25 seconds. Then gradually

lower the container so that the steam nozzle moves up towards the

surface of the milk (fig.14). Do not allow the nozzle to come

completely out of the milk.

n Once the frothing is complete, turn the dial to the

O (i1) position

(fig. 15). The machine will then begin 3 pumping cycles to

automatically cool the system. Once cooling is complete, another

espresso can be made.

Important: To prevent clogging of the steam nozzle,

make sure the milk foam does not cover the black

plastic ring at the top of the steam nozzle.

It is important to clean the steam nozzle after each use to prevent milk

from hardening and drying inside the nozzle.

n To clean the nozzle, place the steam nozzle in a small container filled

with water.

n Turn the dial to the position.

n Turn the dial to the position to remove any remaining milk. Run in

the steam position for at least 30 seconds.

13

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page13

English

14

n Then turn the dial to the O (i1) (fig. 15) position and wipe the

outside of the steam nozzle with a clean cloth.

For thorough cleaning of the steam nozzle, see Section 7, “Cleaning of

the steam Nozzle”.

7. CLEANING AND MAINTENANCE

OF THE APPLIANCE:

n Make sure the coffee machine is unplugged and completely cooled

down before you begin to clean it.

n The removable parts can be cleaned using a cloth and gentle

washing-up liquid and water.

n Do not immerse the coffee machine in water or any other liquid.

OF THE FILTER HOLDER HOUSING:

n Using a damp cloth, regularly clean the filter holder housing in order to

remove any coffee residue which may be stuck there.

n To prolong the life of the percolation head gasket seal, do not put the

filter holder back into place if the coffee machine is not to be used for

a long time.

OF THE STEAM NOZZLE:

n Regularly remove the plastic accessory of the steam nozzle (k)

(Fig. 16) and rinse it.

n To unblock the hole in the steam nozzle outlet, you may use a needle.

OF THE DRIP TRAY:

n The drip tray must be emptied after each time the appliance is used.

n If multiple espressos are prepared one after another, it should be

emptied from time to time (every 6 cups of espressos approximately)

(fig.17).

n The presence of water is normal and is not the sign of a leak. If

necessary, clean the drip tray (m) and its grid (l) with water and a

little gentle washing-up liquid, rinse and dry.

n Make sure the drip tray is put back into place properly (fig. 18).

Caution! Do not put any of these parts into the dishwasher.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page14

English

8. DESCALING

The warranty does not cover machines which have become faulty be-

cause descaling was not periodically performed. Descale your espresso

machine regularly using Krups descaling kits (model F054) available in

Krups authorized service centres (to Krupsonlinestore.ca for Canadian

residents only). In addition to two packets of descaling powder, the kit

also includes a water hardness tester to help you determine the proper

schedule for descaling your machine in normal use. The amount of scale

that develops depends on the hardness of the water used, but also the

level of use. The schedule indicated by the water hardness tester is a

general guideline only. Keep in mind that you may have to descale more

frequently than indicated.

If in doubt, it is recommended to descale every month.

DESCALING THE MACHINE

n Empty the tank and replace.

n Follow the instructions for using the Krups descaling powder inside

the kit.

n Then insert the filter holder (without espresso grounds) and lock into

place by turning to the right.

n Place a container under the steam wand to catch the water.

n Press the “on/off” button to turn the machine on, and then immediately

turn the dial to the position, without stopping at the (i2))position.

n Let the mixture run through the nozzle until steam appears.

n Then turn the dial back to the

O (i1) (fig. 15) position.

n Place the container under the filter holder.

n Once the coffee light turns on, turn the dial to the (h2) (fig. 5)

and run half of the remaining water through.

n Turn the machine by pressing the “on/off” button and leave the dial

at the (h2) position. Empty the container under the filter holder

and replace under the filter holder.

DESCALING FREQUENCY

Ave. number

coffees per

week

Soft water

(<19°th)

Hard water

(19-30°th)

Very hard water

(>30°th)

Less than 7 Once a year Every 8 months Every 6 months

From 7 to 20 Every 4 months Every 3 months Every 2 months

Over 20 Every 3 months Every 2 months Every month

15

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page15

English

16

n After 15 minutes, turn the machine back on.

n Let the rest of the water run through until the water tank is empty.

n Then turn the dial to the (h1). position.

RINSING

IMPORTANT!

After descaling, rinse 2-3 times with clean water as des-

cribed in Section 4 “BEFORE FIRST USE”. Then rinse

the steam nozzle by following the instructions below:

n Fill the water tank with clean water. Then place a container under the

steam nozzle.

n Press the “on/off” button to turn the machine on, and then

immediately turn the dial to the (i3) (fig. 13)position, without

stopping at the (i2)position.

n Let the water run through the nozzle until steam appears.

n Turn the dial back to the

O (i1) (fig. 15) position.

The machine is now descaled and ready to be used again.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page16

The water

does not run

through.

No water in the

tank.

The tank is not

properly in place.

The filter is clogged.

The ground coffee

is too fine.

Your machine needs

to be descaled.

Fill the tank.

Replace the tank in the correct

position.

Clean the filter holder (see Section

7) and try a larger grind of coffee.

The perfect espresso grind will feel

like fine grains that do not clump

when pressed together.

Descale the machine (see Section 8).

Water leaks

from the filter

holder after an

espresso has

been made.

Your machine needs

to be descaled.

Descale the machine

(see Section 8).

Coffee

grounds in the

cup.

The filter holder is

clogged.

The espresso grind

is too fine.

Clean the filter holder with hot

water. Shake to drain the water.

Choose a larger grind of coffee.

The perfect espresso grind will feel

like fine grains that do not clump

when pressed together.

English

17

9. PROBLEMS, PROBABLE CAUSES AND

CORRECTIVE ACTIONS

Problems Possible causes Solutions

The espresso

is not hot

enough.

The cups and the

filter holder are

cold.

Preheat the accessories: cups and

filter holder.

The coffee

flows too

slowly.

The ground coffee

is too fine, too oily

or floury.

The filter holder is

dirty.

The water drip-

through grid is

clogged.

Choose a larger grind of coffee.

The perfect espresso grind will feel

like fine grains that do not clump

when pressed together.

Clean your filter holder (see

Section 7).

When the machine has cooled,

clean the brewing head with a

clean damp cloth.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:35 Page17

English

18

Problems Possible causes Solutions

The water tank

leaks when it

is carried.

The valve at the

bottom of the tank

is dirty or defective.

The valve is blocked

by lime scale.

Wash the water tank and push on

the valve at the bottom of the tank

to make sure it is not stuck.

Descale the machine

(see Section 8).

Water leaks

under the

machine.

Internal leak.

Drip tray is not in

the correct position.

Drip tray has

overflowed.

Check the position of the tank. If

the fault persists, do not use the

machine, contact an approved

service centre.

Check that the drip tray is pushed

completely into the machine (see

section 7).

Carefully empty and rinse the drip

tray, then replace in the machine

(see Section 7).

The pump is

unusually

noisy.

No water in the

tank.

The tank is not

properly positioned.

Stop the machine. Fill the water

tank, replace in the correct position,

and turn the machine back on.

Replace the tank in the correct

position.

The cups are

not filled

equally.

The filter holder is

clogged.

Clean the filter holder

(see section 7).

Leaking filter

holder.

Leaking filter holder.

The filter holder is

not properly

positioned.

The edges of the

filter holder are

clogged with excess

ground coffee.

Pod improperly

positioned in the

filter.

Lock the filter holder firmly in place.

Take care when filling the filter to

brush excess coffee off the edges

before locking the filter holder in

place.

Check that the pod is properly

centered in the filter, with excess

paper removed from E.S.E. pods,

and that none of the paper is

hanging over the edges of the filter.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:36 Page18

English

19

Problems Possible causes Solutions

Your espresso

tastes bad.

After descaling, the

rinsing was not

performed properly.

Rinse the machine carefully after

descaling (see Section 8).

The machine

does not work

The pump could not

be primed due to

lack of water.

The water tank is

not properly

positioned.

Fill the water tank and switch on the

unit. Put an empty container under

the steam nozzle (k), as soon as the

indicator light espresso (h3)

switches on, turn the function

selector (i) to steam position

(i3), hold this position for 2

seconds then put the function

selector back to the initial position.

Replace the water tank in the

proper position.

The steam

wand does

not froth the

milk.

The steam nozzle is

clogged or needs to

be descaled.

The milk is not cold

or not fresh enough.

The shape of the

container is not

appropriate for

frothing.

Carefully clean (see Section 7) or

descale the steam wand (see

Section 8).

Use fresh, cold milk in a cold

container. Pasteurised or UHT milk

is recommended. Whole, lowfat, or

skim milk can all be frothed. Try

using a different brand of milk.

Use a small pitcher-shaped

container with a small diameter for

best results. Also, chilling the

container before adding the milk will

improve results.

10. DISPOSING OF YOUR MACHINE

Environmental protection first!



Your machine contains a lot of recoverable or recyclable

material.



When disposing of your machine, consult your local

waste collection agency to determine the proper method

of recycling and/or disposal.

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:36 Page19

English

20

KRUPS MANUFACTURER'S WARRANTY

: www.krups.com

With a strong commitment to the environment, most of Krups products

are repairable during and after the warranty period. Before returning any

defective products to the point of purchase, please call Krups consumer

service directly at the phone number below for repair options.

Your help to sustain the environment is appreciated!

The Warranty

This product is guaranteed by Krups for a period of 2 years against any manufac-

turing defect in materials or workmanship, starting from the initial date of purchase.

The manufacturer's warranty by Krups is an extra benefit which does not affect

consumer's Statutory Rights.

The Krups warranty covers all costs related to restoring the proven defective product

so that it conforms to its original specifications, through the repair or replacement of

any defective part and the necessary labor. A replacement product may be provided

instead of repairing a defective product. Krups’s sole obligation and your exclusive

resolution under this warranty are limited to such repair or replacement.

Conditions & Exclusions

The Krups warranty only applies within USA, Canada & Mexico, and is valid only on

presentation of a proof of purchase. The product can be taken directly in person to

an authorized service centre or must be adequately packaged and returned, by

recorded delivery (or equivalent method of postage), to a Krups authorized service

centre. Full address details for each country’s authorized service centre are listed on

the Krups website (www.krups.com

) or by calling the appropriate telephone number

listed below to request the appropriate postal address.

Krups shall not be obliged to repair or replace any product which is not accompa-

nied by a valid proof of purchase.

This warranty will not cover any damage which could occur as a result of misuse, ne-

gligence, failure to follow Krups instructions, use on current or voltage other than as

stamped on the product, or a modification or unauthorized repair of the product. It

also does not cover normal tear and wear, maintenance or replacement of consu-

mable parts, and the following:

- -using the wrong type of water

-scaling (any de-scaling must be carried out according to the instructions

for use);

-ingress of water, dust or insects into the product;

-mechanical damages, overloading

-damages or bad results due to wrong voltage or frequency

-accidents including fire, flood, lightning, etc

-professional or commercial use

-damage to any glass or porcelain ware in the product

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:36 Page20

English

This warranty does not apply to any product that has been tampered with, or to da-

mages incurred through improper use and care, faulty packaging by the owner or mi-

shandling by any carrier.

The Krups manufacturer's warranty applies only for products purchased and used in

USA, Canada & Mexico. Where a product purchased in one country and then used

in another one:

a) The Krups guarantee duration is the one in the country of usage of the

product, even if the product was purchased in another listed country with

different guarantee duration.

b) The Krups guarantee does not apply in case of non conformity of the pur-

chased product with the local standards, such as voltage, frequency,

power plugs, or other local technical specifications.

c) The repair process for products purchased outside the country of use

may require a longer time if the product is not locally sold by Krups

d) In cases where the product is not repairable in the new country, the Krups

guarantee is limited to a replacement by a similar product or an alterna-

tive product at similar cost, where possible.

Consumer Statutory Rights

This Krups manufacturer's warranty does not affect the statutory rights a consumer

may have or those rights that cannot be excluded or limited, nor rights against the re-

tailer from which the consumer purchased the product. This warranty gives a consu-

mer specific legal rights, and the consumer may also have other legal rights which vary

from State to State or Country to Country or Province to Province. The consumer

may assert any such rights at his sole discretion.

Additional information

Accessories, Consumables and end-user replaceable parts can be purchased, if lo-

cally available, as described in Krups internet site.

: www.krups.com

21

CANADA

GROUPE SEB

CANADA

345 Passmore

Avenue

Toronto, ON

M1V 3N8

MEXICO

GROUPE SEB

MEXICO

S.A. de C.V.

Goldsmith 38 Desp.

401 Col. Polanco

Delegacion Miguel

Hildalgo

11 560 Mexico D.F.

MEXICO

U.S.A.

GROUPE SEB

USA

2121 Eden Road

Millville, NJ

08332

1-800-418-3325

01800 1128325

800-526-5377

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:36 Page21

Français

22

IFU_KR_COFFEE_MAKER_XP3200_Mise en page 1 06/06/11 13:36 Page22

La page est en cours de chargement...

Krups XP320050 Manuel utilisateur

Krups XP320050 Manuel utilisateur

dans d''autres langues

Documents connexes