Seiki SE20HY Manuel utilisateur

SEIKI _

USER MANUAL

MANUEL D'UTILISATION

MANUAL DEL USUARIO

m

B

I!

Read the User Manual carefully before using the TV and keep it for further reference.

Avant d'utilJser le televJseur, IJsez attentivement le manuel d'utilJsation et conservez-le

pour consultation future

Lea el Manual del usuano antes de utJlizar el televisor y conservelo para futuras consultas

Important Safety Instructions

Safety Information

Preparation

What's Included

Front View

Rear View

Installing the Base Stand

Removing the Stand for Wall-Mounting

Remote Control

Connecting External Devices

Customizing "IV Settings

Initial Setup

Navigating the On screen Display

Selecting Input Source

Picture Settings

Audio Settings

Time Settings

Setup Settings

Lock Settings

Channel Settings

USB Multimedia

Parental Control

Troubleshooting

Maintaining

Specification

Limited Warranty

2

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

21

22

23

24

• Read these instructions - All the safety

and operating instructions should be read

before this product is operated.

• Keep these instructions - The safety and

operating instructions should be retained for

future reference.

• Heed all warnings - All warnings on the

appliance and in the operating instructions

should be adhered to.

• Follow all instructions - All operating and

use instructions should be followed.

• Do not use this apparatus near water

- The appliance should not be used near

water or moisture - for example, in a wet

basement or near a swimming pool, and the

like.

• Clean only with dry cloth.

• Do not block any ventilation openings.

Install in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than

the other. A grounding-type plug has two

blades and a third grounding prong. The

wide blade or the third prong are provided

for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

• Only use attachments/accessories specified

by the manufacturer.

• Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is

used, use caution when moving the cart/

apparatus combination to avoid injury from

tip-over.

• Unplug this apparatus during lightning

storms or when unused for long periods of

time.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as the power supply cord

or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or moisture.

The apparatus should not be exposed to dripping or

splashing. Objects filled with liquids, such as vases

should not be placed on apparatus.

WARNING: The batteries shall not be exposed to

excessive heat such as sunshine, fire or the like.

WARNING: The mains plug is used as disconnect

device, the disconnect device shall remain readily

operable.

WARNING: To reduce the risk of electric shock, do not

remove cover (or back) as there are no user-serviceable

parts inside. Refer servicing to qualified personnel.

RISQUE DE CHOC ELECTRmQUE NE

PAS OUVRIR

This lightning flash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of non-insulated

"dangerous voltage" within the product's enclosure that

may be of sufficient magnitude to constitute a risk of

electric shock.

///_ The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance instructions in the literature accompanying

the appliance.

This equipment is a Class II or double insulated

D electrical appliance. It has been designed in such

a way that it does not require a safety connection

to electrical earth.

This product contains electrical or electronic

materials. The presence of these materials

may,if not disposed of properly, have potential

adverse effects on the environment and human

health.

Presence of this label on the product means it

should not be disposed of as unsorted waste and

must be collectedseparatety. As a consumer, you

are responsible for ensuring that this product is

disposed of properly.

This product meets ENERGY STAR <"

guidelines for energy efficiency.

ENERGY STAR and the ENERGY

STAR mark are registered U.S. marks.

ENERGY STAR is a registered mark

owned by the U.S. government.

_I 2

_ -

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in

this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the

label at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other

electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm or when not in using the television for long periods, turn off the power

switch on the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do not use in wet, moist

areas, such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,

liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything

accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service

the unit yourself is dangerous and may invalidate the product's warranty. Qualified personnel

must only service this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not

use for long period, or when the batteries are exhausted.

• Do not break open or throw exhausted batteries into a fire.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure

at least 5cm (2") clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care

of the remote control.

• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based fluids.

• Do not install near any heat sources such as radiators, heat registers, stoves or other

apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding plug has two blades and a third

grounding prong, the wide blade,or the third prong is provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

• Refer all servicing to a qualified service personnel.Servicing is required if the apparatus does

not operate normally or if the apparatus, including the power supply cord or pulg, has been

damaged in any way.

• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus;

when the apparatus has been exposed to rain or moisture; or if the apparatus has been

dropped.

• Always connect your television to a power outlet with protective ground connection.

_=3

What's Included

SEIKI oo

TV Set Remote Control with Batteries

TV Stand Four Screws

User Manual

Quick

Start Guide

User Manual Quick Start Guide

_t 4

PREPARATION

Front View

0

000000

SEIKI ............

oo

1. POWER

Switch the TV between On / Standby mode.

2. SOURCE

Press to select among different input signal sources.

3. MENU

Display the OSD (on screen display) menu.

4. CH ,,/^

Press to select a channel.

5. VOL 4+

Press to adjust the volume.

6. POWER Indicator

Illuminate blue when the TV isturned on. Illuminate red when the TV is in standby mode.

7. IR (Infrared Receiver)

Receive IR signals from the remote control.

_-5

PREPARATION

Rear View

1. Power Cord

Connect to AC power outlet.

2. Headphone Socket

Connect to the Headphones.

3. OPTICAL Output

Connect a digital sound system to this

jack.

4. COMPONENT Input

Connect to AV devices with component

(Y/Pb/Pr) video and audio input sockets.

5. VGAInput

Connect to a computer or other devices

with a VGA interface.

6. PC AUDIO Input

Connect to a computer audio output.

7. HDMIInput

Connect to a High-Definition (HD) signal

input device.

8. DTV/TV Input

Connect to the antenna (75G VHF/UHF)

socket with the RF coaxial cable.

9. USB Port

Connect to a USB storage device to play

compatible audio and photo files.

_t 6

_ -

Installing the Base Stand

PREPARATION

1. Lay the TV face-down on a flat,

cushioned surface to avoid damaging

or scratching.

2.Fix the left base stand to the TV

using the 2 pcs provided screws.

3.Fix the right base stand assembly

to the TV using the 2 pcs provided

screws.

Removing the Stand for Wall=Mounting

1.Lay the TV face-down on a flat,

cushioned surface to avoid damaging

or scratching.

2.Untighten the 4 pcs screws holding

the stand assembly and remove them.

3.Attach the walt-mount bracket to

the TV using the mounting holes on

the back of the TV. Mount this TV

according to the instructions included

in the wall-mount bracket,

WARNING: This apparatus is intended to be supported by UL Listed waft mount bracket.

_-7

PREPARATION

Remote Control

0

SOURCE

-Oi ivoL O-

\__ \ /

SEIKI

--8

D

1. (D: Switch the TV between on and

standby mode

2. 1_: Mute and restore your TV sound

3. 0~9: Select a program (ATV/DTV mode)

4. --: Enter multiple program channel

number such as 2-1

5. d;>: Return to previous viewing channel

6. P.MODE: Select picture mode: dynamic/

movie/energy saving/user/standard

7. S.MODE: Select sound mode: standard/

music/movie/user

8. MTS: Switch among different audio

channels: STEREO/MONO/SAP

9. SLEEP: Set the TV sleep timer:

OFF/5/10.../180/240 min

10. SOURCE: Select among the different

input signal sources: TVIAVIComponentl

HDMI/VGA/USB

11. INFO: Display the present screen

information such as the current channel

and input source

12. CH+/-: Select a channel

13. VOL+/-: Adjust the volume

14. AUTO:Press to adjust the picture

automatically in VGA source

15. CO: Closed Caption selection: ON/OFF/

CC On Mute

16. V-CHIP: Set up parental control

17. ASPECT: Select the aspect ratio

settings:standa rd/wide/wide zoomlzoom

18. OK: Confirm the selection in the OSD'on

screen dislay' menus

19.4 A V I_': Allows you to navigate the

OSD menus and adjust the system

settings to your preference.

20. MENU: Display the OSD (on screen

display) menu

21. EXIT: Exit the OSD menu

22. AIBIClD: Single push>switch to FAV

channel,push and hold >store current

channel

23. CH.LIST: Display program list

24. ADD/ERASE: Add or delete Favorite

channels

25. FAV: Select a favorite channel

26. FAY+l-: Add or delete favorite channels

27. HDMI: Select the HDMI mode directly

_I 8

_ -

|

L........ 1

Blu-ray Player / Recorder

(_)_ Game Console

Satellite l

Video Camera

Satellite Receiver VCR

i_

_ h

Cable

(not included)

Component Cable

(not included)

OR

RF Cable

(not included)

l

I Optical Cable

(not included)

Digital Audio System

t

VGA Cable

not included)

[_ Cable

I (not included)

HDMI Cable

not included

Computer HDMI Device

_-9

Initial Setup

• Connect the power cord to the power socket after you have completed all the

physical connections. At this stage, the TV wilt enter Standby Mode and the red

LED indicator wilt illuminate.

• In Standby Mode, press the (D button on the main unit or on the remote control to

turn the TV on. The red LED indicator will turn blue.

• The first time you turn the TV on, it wilt go into the Setup Wizard. Press 4/1_

A/V buttons to select your desired mode and press OK to confirm.

0 0 0

0 0

Home Mode (Energy Saving) is the default as-shipped television configuration and

settings. And Home Mode (Energy Saving) is the setting in which the

product qualifies for ENERGY STAR. Any changes to default as-shipped television

configuration and settings would change the energy consumption. And enabling

certain optional features and functionalities may increase energy consumption

beyond the limits required for ENERGY STAR quafification, as applicable.

Retail Mode : Select Retail Mode if you would fike your picture to be brighter. At

times this mode may use more energy to operate the Volume/Sound Mode and the

Picture Mode. In this setting, the power consumption may possibly exceed the limited

requirement of the ENERGY STAR@qualification.

ENERGY STAR @ is a set of power-saving guidelines issued by the U.S.

Environmental Protection Agency(EPA).

ENERGY STAR @ is a joint program of the U.S. Environmental Protection Agency

and the U.S. Department of Energy helping us all save money and protect the

environment through energy efficient products and pratiees.

• The ON-MODE Power under Home Mode should be less

than 21.2 W.

• The SLEEP-MODE Power should be less than 0.5 W.

0

_ 10

O

CUSTOMIZING -iV SETTINGS

O

@

• If channels can not be found, this frame

will be displayed automatically.

Navigating the On=screen Display

* Press the MENU button to display the main menu.

* Use 4 / _ buttons to navigate and select the available menus.

_-11

CUSTOMIZING TV SETTINGS

Selecting Input Source

• Press the SOURCE button on the

main unit or on the remote control to

display the Input Source list.

• Press A/V buttons to select your

desired input source among: TV/

Component/AV / HDMI / VGA / USB

and then press OK button to confirm.

Picture Settings

• Press the MENU button on the main

unit or on the remote control and

then press _/1_ buttons to select

PICTURE menu.

• Press A/V buttons to select the

following picture options and then

press 4/I_ buttons to adjust each

option's setting.

Cycle among picture mode: Dynamic/Movie/Energy

Picture Mode Saving/User/Standard.

Alternative: you may press the P.MODE button to

select the picture mode directly.

Contrast Adjust the difference between light and dark levels in

the pictures. (For User mode)

Increase or decrease the amount of white in the picture.

Brightness (For User mode)

Color Control the color intensity. (For User mode)

Tint Adjust the balance between red and green levets.(For

AV mode and ATV mode)

Sharpness Adjust the level of crispness in the edges between light

and dark areas of the picture. (For User mode)

Color Temperature Cycle among color temperatures: Cool/Normal/Warm.

Allow the blue background to turn On/Off during weak or

Blue Screen

no signal conditions.

_t 12

_ -

CUSTOMIZINGTVSETTINGS

Audio Settings

• Press the MENU button on the main

unit or on the remote control and then

press _/_, buttons to select AUDIO

menu.

• Press A/V buttons to select the

following audio options and then

press the 4/_ button to adjust each

option's setting.

Allow the selection of an audio-enhancement technique:

StandardlMusiclMovielUser

Sound Mode

Alternative: you may press the &MODE button to select

the sound mode directly.

Control the relative intensity of lower-pitched sounds. (For

Bass

User mode)

Control the relative intensity of higher-pitched sounds. (For

Treble

User mode)

Balance Adjust the relative volume of the speaker in a multiple

speaker system.

Surround Sound Provide an enhanced listening experience.

Auto Volume Volume levels are automatically controlled.

Select the digital audio output mode between RAW/PCM/

SPDIF Mode

Off.

Audio Language Select audio language among: English, French, Spanish

_-13

CUSTOMIZING TV SETTINGS

Time Settings

* Press the MENU button on the main

unit or on the remote control and then

press 4/_ buttons to select TIME

menu.

* Press A/V buttons to select the

following time options and then press

41/_ button to adjust each option's

setting.

Select a period d time after which the TV automatically

switches to standby mode: Off/5/10/.../180/240 min.

Sleep Timer

Alternative: You may press the SLEEP button

repeatedly to select the number of minutes directly.

Select a Time Zone : Pacific/Alaska/Hawaii/Eastern/

Time Zone

Central/Mountain/Atlantic/Newfoundland.

Daylight Saving Time Select to turn On/Off daylight saving time.

_t 14

Setup

CUSTOMIZING TV SETTINGS

* Press the MENU button on the main

unit or on the remote control and then

press 4/_ buttons to select SETUP

menu.

* Press A/V buttons to select the

following setup options and then

press the 4/_" button to adjust each

option's setting.

Menu Language Select menu language " English, French or Spanish. The

default on-screen menu language is English.

Transparency Select to turn On/Off transparency function.

Select zoom mode :Wide/Wide Zoom/Zoom/Standard/Just

Scan/Dot to Dot.

Zoom Mode

Note: Different input source, the zoom mode options may

differ.

Reduce the noise level of the connected device: Off/

Noise Reduction

Weak/Middle/Strong.

Advanced Adjust advanced option's setting: H-POS, V-POS, Clock,

Phase or Auto. (VGA source mode only)

CC Mode Select CC mode : On, Off or CC on Mute.

Basic Basic Selection: CC1, CC2, CC3, CC4,

Selection Text1, Text2, Text3, Text4.

Closed Caption Advanced Advanced Selection: Service1, Service2,

Selection Service3, Service4, Service5, and Service6.

Options: Mode, Font Style, Font Size, Font

OPTION Edge Style, Font Edge Color, FG Color, BG

Color, FG Opacity and BG Opacity.

DLC Select to turn On/Off the dynamic luminance control.

Restore Default Restore the TV to factory default settings.

• Remarks: when select 'just scan' mode in HDMIoption, the TV display as full screen,

when select 'Dot to Dot 'mode in VGAoption,the TV display as fullscreen.

_-15

CUSTOMIZING TV SETTINGS

Lock Settings

Note: The default password is "0000"

* Press the MENU button on the main

unit or on the remote control and then

press 4/_ buttons to select LOCK

menu.

* Use the 0=9 buttons to input 4-digit

password to enter the LOCK menu.

* Press A/V buttons to select the

following options and then press the

4/_ buttons to adjust each option's

setting.

Change Password

System Lock

US

Canada

RRT Setting

Reset RRT

Clear Lock

Use 0-9 buttons to input the old password and then input

the new 4-digit password. Re-enter new password for

confirmation.

Select to turn On/Off system lock. The following options

(US, Canada, RRT Setting and Reset RRT) will only be

accessible when you turn the system lock on.

TV RATING: Press OK button to lock or unlock

TV

TV rating.

Select MPAA rating : N/A,G, PG, PG-13, R,

MPAA

NC-17,or X.

Canada Select MPAA rating for English-speaking

English Canada : E, C, C8+, G, PG, 14% 18+.

Canada Select MPAA rating for Quebec Canada : E, G,

French 8 ans+, 13 ans+, 16 ans+, 18 ans+.

Set Rating Region Table.

Select to reset the RRT setting.

Clear all lock settings.

_t 16

_ -

CUSTOMIZING TV SETTINGS

Channel Settings

* Press the MENU button on the main

unit or on the remote control and

then press 4/11_ buttons to select

CHANNEL menu.

* Press ,_,/V buttons to select the

following channel options and then

press the 4/I_ button to adjust each

option's setting.

Air/Cable Select antenna between Air and Cable.

First, select your cable system from Auto/STD/IRC/HRC.

Auto Scan Next, select the Auto Scan feature to scan your available

cable channels. It will perform the auto scan if the Air antenna

is selected.

Favorite Set the selected channel as favorite channels.

Show/Hide Show/Hide the selected channel.

Channel No. Display the current channel number.

Channel Label Display the current channel label.

DTV Signal Display the quality of current DTV signal.

_-17

Viewing Photos

• Press the SOURCE button on the

main unit or on the remote control

then press the A/V buttons to select

the USB mode and then press OK

button.

• Press the 4/1_ buttons to select

PHOTO and then press OK button.

Note: File format supported. JPEG.

Listening to Music

• Press the SOURCE button on the

main unit or on the remote control

then press the A/V buttons to select

the USB mode and then press OK

button.

• Press the 4/t_ buttons to select

MUSIC and then press OK button.

Note: File format supported. MP3.

Operation Tips

i_ Press to start the music or photo playback.

II Press to pause the music or photo playback.

III Press to stop music or photo playback.

_l Press to play the previous track or view the previous photo.

I_ Press to play the next track or view the next photo.

_1 Press to speed up backward.

I_ Press to speed up forward.

REPEAT Press to select different repeat mode.

_t 18

Press the MENU button on the main unit or on the remote control and then press 4/_

buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter

the LOCK menu. if used, this option feature can "block" undesirable programming from

appearing on the TV. Parental Control offers the user a wide variety of options and

settings that restrict or "block" the programming that can appear on the TV. Parental Control

allows the user to define which program rating they consider acceptable for younger more

sensitive viewer, it can be preset and turned either on or off by the user who specifies the

secret 4-number code, the password. The number of hours blocked are specified. General

audiences and children blocks should be both programmed into the TV's memory. Separate

different viewer ratings are specified for both TV and the motion picture industry; both rating

systems should be used and based on the ages of children.

Overview

To ensure complete coverage for all TV programs, (movies and regular TV shows) choose

a rating for MPAA, from the selections below,as well as ratings from the TV Parental

Guidelines Rating Systems below, using the Age Block option for General Audiences, and

for children.in addition, you may wish to add additional restrictions from the content block

menu, and submenus examples below.

Things to Consider before Setting up Parental Control

Determine which rating you consider acceptable to the viewer. (For example,if you choose

TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to

see: TV-PG,TV-14,or TV-MA rated programming.) You may block the auxiliary video source

entirely. (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/

Video Input Jacks) or remain unblocked, then choose acceptable ratings. Block program

"Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex

Scenes,Violence Scenes or Fantasy. Violent Scenes; in Content BIk option. Select a secret

password, in the Set Password option, using the numbers keys on the remote control.Save

the password, it is the only way to access the Parental Control menu and change rating

setting, or turn off Parental Control.

• You can set different Parental Control viewing restrictions for general audiences and for

children, both can be active at the same time,

• Simply specifying one content block such as Sex Scenes, will not automatically restrict

the programming that appears from the video sources,

• Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will

automatically restrict the programming that appears from the video sources,

• You cannot disable Parental Control by disconnecting the TV from power, Block

hours will be automatically reset to the original block time setting specified if power is

disconnected,

_-19

La page charge ...

Seiki SE20HY Manuel utilisateur

Seiki SE20HY Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents