AT&T TL88102 Manuel utilisateur

User’s manual

TL88102/TL88102BK/TL88202

DECT 6.0 2-line

cordless telephone/

answering system with

caller ID/call waiting

Congratulations

on your purchase of this AT&T product. Before using this AT&T product,

please read the Important safety information section on pages 93-94 of

this manual. Please thoroughly read this user’s manual for all the

feature operations and troubleshooting information necessary to install

and operate your new AT&T product. You can also visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada,

dial 1 (866) 288-4268.

This telephone meets the California Energy Commission regulations for

energy consumption. Your telephone is set up to comply with the energy-

conserving standards right out of the box. No further action is necessary.

Model number: TL88102/TL88102BK (one handset)

TL88202 (two handsets)

Type: DECT 6.0 2-line cordless telephone/answering system

with caller ID/call waiting

Serial number: ________________________________________________________

Purchase date: ________________________________________________________

Place of purchase: _____________________________________________________

Both the model and serial numbers of your AT&T product can be found on

the bottom of the telephone base.

Save your sales receipt and original packaging in case it is necessary to

return your telephone for warranty service.

Telephones identified with this logo have reduced noise and interference

when used with most T-coil equipped hearing aids and cochlear implants. The

TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry

Association. Used under license.

the AT&T logo are trademarks of AT&T Intellectual Property licensed to

Advanced American Telephones, San Antonio, TX 78219. Printed in China.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Parts checklist

Your telephone package contains the following items. Save your sales receipt

and original packaging in the event warranty service is necessary.

Cordless handset

(1 for TL88102/

TL88102BK)

(2 for TL88202)

Charger for cordless handset

with power adapter installed

(1 for TL88202)

Battery compartment

cover

(1 for TL88102/

TL88102BK)

(2 for TL88202)

Telephone line cords (2) Power adapter for

telephone base

Telephone base

Battery for cordless

handset

(1 for TL88102/

TL88102BK)

(2 for TL88202)

User’s manual Quick start guide

Belt clip

(1 for TL88102/

TL88102BK)

(2 for TL88202)

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT183342/BT283342 (2.4V 400mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1349

User’s manual

TL88102/TL88102BK/TL88202

DECT 6.0 2-line

cordless telephone/

answering system with

caller ID/call waiting

Telephone base installation

This quick start guide provides you with basic instructions only.

For more complete instructions, refer to your user’s manual

provided in the package, or see the online user’s manual at

www.telephones.att.com/manuals.

Quick start guide

TL88102/TL88102BK/TL88202

Plug one end of the black telephone

line cord into the 2-line telephone wall

jack or a DSL filter.

Plug the large end of the telephone

base power adapter into a power

outlet not controlled by a wall

switch.

A DSL filter (not included) is

required if you have DSL high-

speed Internet service.

The DSL filter must be plugged

into the telephone wall jack.

Plug the other end of the black

telephone line cord into the

LINE 1/L1+L2 telephone jack at

the back of the telephone base.

Raise the

antenna.

Option 1: Installation with 2-line jack

User’s manual

TL88102/TL88102BK/TL88202

DECT 6.0 2-line

cordless telephone/

answering system with

caller ID/call waiting

Table of contents

Getting started

Quick reference guide - handset ........ 1

Quick reference guide - telephone

base ..................................................................3

Installation .........................................................5

Telephone base and charger

installation ...................................................6

Telephone base installation .............6

Charger installation ...............................7

Battery installation and charging ......8

Belt clip and optional headset ........... 10

Belt Clip ....................................................... 10

Headset ....................................................... 10

Telephone settings

Handset settings ......................................... 11

Ringer volume .........................................12

Ringer tone ................................................12

LCD language ...........................................13

Voicemail (visual message

waiting) indicator ..................................13

Clear voicemail indicator .................13

Key tone...................................................... 14

Set date/time ..........................................15

Home area code .................................... 16

Telephone base settings ........................17

Ringer volume ........................................ 18

Ringer tone ............................................... 18

LCD language .......................................... 19

Voicemail (visual message

waiting) indicator ................................. 19

Clear voicemail indicator ................ 19

Key tone......................................................20

Set date/time ..........................................21

Home area code .................................... 22

Telephone operation

Telephone operation ............................... 23

Make, answer or end a call ............23

Silence the ringer .................................24

Handset speakerphone ...................24

Last number redial ..............................24

Options while on call ................................ 27

Volume Control ..................................... 27

Call waiting ............................................... 27

Mute .............................................................. 27

Hold ...............................................................28

Chain dialing ............................................29

Multiple Handset use

Multiple handset use .................................31

Join a call in progress .........................31

Handset locator .....................................31

Intercom ........................................................... 32

Answer an incoming call during

an intercom call ..................................... 33

Call Transfer using intercom ..............34

Transfer a call ..........................................34

Conference Call ...........................................36

Share an outside call ..........................36

Conference line 1 and line 2

calls ................................................................36

Answer an incoming call during

a conference call ...................................38

Directory

About the directory ..................................39

Shared directory ...................................39

Capacity ......................................................39

Character chart .....................................39

Create directory entries ........................40

Create a new directory entry .......40

Review the directory ................................42

Review directory entries .................42

Search by name .....................................43

Dial, delete or edit directory

entries .......................................................... 44

Dial a directory entry ........................ 44

Delete a directory entry ................. 44

Edit a directory entry........................ 44

Speed dial ........................................................46

Assign a speed dial number ..........46

Review the speed dial entries ......48

Dial a speed dial entry .......................48

Edit a speed dial entry ......................49

Reassign a speed dial entry ...........50

Delete a speed dial entry ................50

Caller ID

About caller ID ...............................................51

Information about caller ID with

call waiting .................................................51

Caller ID history ........................................... 52

How the caller ID history

(call log) works .......................................52

Missed (new) call indicator ............52

Caller ID operation .....................................53

Memory match ......................................53

Review the caller ID history ...........54

View dialing options ...........................55

Dial a call log entry ..............................55

Save a call log entry to the

directory .....................................................56

Delete from the call log ................... 57

Reasons for missing caller

information ..............................................58

Answering system

Answering system settings .................59

Announcement ......................................59

Answer ON/OFF ....................................63

Call screening ..........................................64

Number of rings ....................................65

Remote access code ..........................66

Message alert tone .............................67

About the answering system .............68

Answering system and

voicemail indicators............................68

Using the answering system and

voicemail together ..............................68

Message capacity .................................69

New message indicator ...................69

Voice prompts ........................................69

Call screening ..........................................69

Call intercept ...........................................70

Base ringer ................................................70

Temporarily turning off the

message alert tone.............................70

Message playback .......................................71

Message playback ................................71

Delete all messages ............................ 72

Recording and playing memos ......... 73

Record a memo ..................................... 73

Play back a memo ................................74

Remote access ............................................. 75

Appendix

Adding and registering handsets .... 76

Register a handset to the

telephone base ......................................76

Deregistering handsets ......................... 77

Deregister all handsets from

the telephone base ............................. 77

Handset and telephone base

indicators ...................................................78

Handset screen icons ........................78

Telephone base screen icons .......79

Alert tones and lights ..............................80

Handset alert tones ............................80

Telephone base alert tones ..........80

Handset lights .........................................81

Telephone base lights ........................81

Screen display messages ......................82

Screen messages .................................82

Troubleshooting..........................................84

Maintenance ..................................................92

Important safety information ...........93

Safety information ..............................93

Especially about cordless

telephones ................................................94

Precautions for users of

implanted cardiac pacemakers ...94

Pacemaker patients ...........................94

Especially about telephone

answering systems .............................94

For C-UL compliance ................................95

Mesures de sécurité

importantes .............................................95

FCC Part 68 and ACTA .............................98

FCC Part 15 ......................................................99

California Energy Commission

battery charging testing

instructions ........................................... 100

Limited warranty ......................................101

Technical specifications .......................103

DECT 6.0 digital technology ........103

Telephone operating range ........103

Redefining long range

coverage and clarity .........................103

Index

Index ................................................................. 104

1

Quick reference guide - handset

REDIAL/PAUSE

Press to review the redial list

(page 24).

While dialing or entering

numbers into the directory,

press and hold to insert a

dialing pause (pages 23 and 40).

•

DIR/VOLUME

Press to enter the directory

when the telephone is not in

use (page 42).

Press to scroll up while in

menus.

During a call or message

playback, press to increase

the listening volume

(pages 27 and 71).

While entering names or

numbers, press to move the

cursor to the right.

•

LINE 1/FLASH

Press to make or answer a call

on line 1 (page 23).

During a call, press to answer

an incoming call on line 1 when

you receive a call waiting alert

(page 27).

•

CID/VOLUME

Press to review the call log

when the telephone is not in

use (page 54).

Press to scroll down while in

menus.

During a call or message

playback, press to decrease

the listening volume

(pages 27 and 71).

While entering names or

numbers, press to move the

cursor to the left.

•

1

While reviewing a call log

entry, press repeatedly to

add or remove 1 in front of

the telephone number before

dialing or saving it in the

directory (page 55).

•

/SPEAKER

Press to make or join a call

using the first available line,

starting with line 1 (page 24).

Press to answer a call using the

speakerphone (page 23).

During a call, press to switch

between speakerphone and

handset use (page 24).

•

CHARGE light

On when the handset is charging

in the telephone base or charger

(page 9).

•

OFF/CANCEL

During a call, press to hang up

(page 23).

Press and hold while the

telephone is not in use to

erase the missed calls

indicator (page 52).

Press to delete a digit or

character while entering a

number or name.

While in a menu, press to

cancel an operation, back up to

the previous menu, or exit the

menu display; or press and hold

to return to the idle mode.

•

Soft keys (2)

Press to select a menu item displayed above

the key.

•

LINE 2/FLASH

Press to make or answer a call

on line 2 (page 23).

During a call, press to answer

an incoming call on line 2 when

you receive a call waiting alert

(page 27).

•

# (pound key)

Press repeatedly to show other

dialing options when reviewing

a call log entry (page 55).

•

INT

Press to initiate an intercom

conversation (page 32) or

transfer a call (page 34).

•

HOLD

Press to put a call on

hold (page 28).

•

Getting started

2

Getting started

MENU

HANDSET

12:45am 12/31

Main menu

ANSWERING SYS (page 59)

DIRECTORY (page 39)

CALL LOG (page 51)

RINGERS (page 12)

SETTINGS (page 11)

•

Using menus:

Press the MENU soft key to show the menu.

Press qCID or pDIR to scroll through menu items.

Press the SELECT soft key to confirm or save changes to a highlighted

menu item.

Press the BACK soft key or OFF/CANCEL to cancel an operation, back to

the previous menu without making any changes, or exit the menu display.

•

Quick reference guide - handset

3

Getting started

Quick reference guide - telephone base

X/DELETE

Press to delete messages (pages 71 and 72).

/REPEAT

Press to repeat a message or press twice to

play the previous message (page 71).

/SKIP

Press to skip to the next message (page 71).

•/REC

Press to record a memo (page 73) or an

outgoing announcement (page 60).

•

/MAIL BOX 2

Press to start or stop

message playback of the

mailbox of line 2 (page 71).

•

/ANSWER ON 2

Press to turn the answering system

of line 2 on or off (page 63).

•

/LINE 2

Press to make or

answer a call on

line 2 (page 23).

•

HOLD

Press to put a call on hold

(page 28).

•

/VOLUME/

During a call, press

to adjust the

speakerphone volume

(page 27).

Press to adjust

the volume during

message playback

(page 71).

While the telephone

base is ringing, press

the increase or

decrease the ringer

volume.

When the telephone

is not in use, press to

adjust the telephone

base ringer volume

for all lines (page 70).

•

# (pound key)

Press repeatedly to show other

dialing options when reviewing a

call log entry (page 55).

•

/ANSWER ON 1

Press to turn the answering system

of line 1 on or off (page 63).

•

/MAIL BOX 1

Press to start or stop

message playback of the

mailbox of line 1 (page 71).

•

/LINE 1

Press to make or

answer a call on

line 1 (page 23).

•

1

While reviewing a call log entry,

press repeatedly to add or remove

1 in front of the

telephone number

before dialing

or saving it in the

directory (page 55).

•

FLASH

During a call, press to

answer an incoming

call when you receive

a call waiting alert

(page 27).

•

Large tilt display

Move the top of

the display forward

or backward to

adjust the angle

of the screen for

maximum visibility.

•

4

Getting started

BASE

12:45am 12/31

REDIAL MENU

BASE

12:45am 12/31

REDIAL MENU

Main menu

Answering sys (page 59)

Directory (page 39)

Call log (page 51)

Page all HS (page 31)

Intercom (page 32)

Ringers (page 18)

Settings (page 17)

•

Using menus:

Press the MENU soft key to show the menu.

Press qCID or pDIR to scroll through menu items.

Press the SELECT soft key to confirm or save changes to a highlighted

menu item.

Press the BACK soft key or CANCEL to cancel an operation, back to the

previous menu without making any changes, or exit the menu display.

•

Quick reference guide - telephone base

DIR

Press to enter the directory

when the telephone is not in use

(page 42).

Press to scroll up while in menus.

While entering names or numbers,

press to move the cursor to the

right.

•

CID

Press to review the call log when the

telephone is not in use (page 54).

Press to scroll down while in menus.

While entering names or numbers,

press to move the cursor to the left.

•

CANCEL

While in a menu setting item, press to

exit without making changes or press

and hold to return to idle mode.

While the telephone base is ringing,

press to silence the ringer temporarily

(page 24).

Press and hold to erase the missed

calls indicator while the telephone is

not in use (page 52).

While entering names or numbers,

press to delete a character or a digit.

•

Soft keys (2)

Press to select a menu

item displayed above

the key.

•

5

Getting started

Installation

Install the telephone base close to a telephone jack and a power outlet not

controlled by a wall switch. For optimum range and better reception, place

the telephone base in a central and open location.

If you subscribe to high-speed Internet service (DSL - digital subscriber

line) through your telephone line, you must install a DSL filter between the

telephone line cord and the telephone wall jack (see pages 6-7). The filter

prevents noise and caller ID problems caused by DSL interference. Please

contact your DSL service provider for more information about DSL filters.

Your product may be shipped with protective stickers covering the handset

and telephone base displays - remove them before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Avoid placing the telephone base too close to:

Communication devices such as television sets, VCRs, or other

cordless telephones.

Excessive heat sources.

Noise sources such as a window with traffic outside, motors, microwave

ovens, refrigerators, or fluorescent lighting.

Excessive dust sources such as a workshop or garage.

Excessive moisture.

Extremely low temperature.

Mechanical vibration or shock such as on top of a washing machine

or workbench.

•

See pages 8-9 for

easy instructions.

You must install and

charge the battery before

using the telephone.

STOP!

6

Getting started

Telephone base and charger installation

Telephone base installation

If you subscribe to digital subscriber line (DSL) high-speed Internet service

through your telephone line, you must install a DSL filter between each

telephone line cord and telephone wall jack. The filter prevents noise and

caller ID problems caused by DSL interference. Contact your DSL service

provider for more information about DSL filters.

If you have a 2-line wall jack, install the telephone base, as shown in

Option 1 below.

If you have separate wall jacks for each line, install the telephone base, as

shown in Option 2 on the next page.

Option 1: Installation with 2-line jack

Plug one end of the black telephone

line cord into the 2-line telephone wall

jack or a DSL filter.

Plug the large end of the telephone

base power adapter into a power

outlet not controlled by a wall

switch.

A DSL filter (not included)

is required if you have DSL

high-speed Internet service.

The DSL filter must be

plugged into the telephone

wall jack.

Route the power adapter

cord through this slot.

Plug the small end of the telephone base

power adapter into the power adapter jack

on the back of the telephone base.

Plug the other end of the

black telephone line cord into

the LINE 1/L1+L2 telephone

jack at the back of the

telephone base.

Raise the

antenna.

7

Getting started

Telephone base and charger installation

Option 2: Installation with separate line jacks

IMPORTANT INFORMATION

Use only the power adapter(s) supplied with this product. To order a replacement

power adapter, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

The power adapters are intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

•

Plug the power adapter into a power outlet not

controlled by a wall switch.

Charger installation

DSL filters (not

included) are required

if you have DSL high-

speed Internet service.

The DSL filter must

be plugged into the

telephone wall jack.

Plug one end of the clear telephone

line cord into the line 1 telephone

wall jack or a DSL filter.

Plug one end of the black

telephone line cord into the line 2

telephone wall jack or a DSL filter.

Plug the large end of the

telephone base power

adapter into a power outlet

not controlled by a wall

switch.

Raise the antenna.

Route the power

adapter cord through

this slot.

Plug the small end of the telephone base

power adapter into the power adapter jack

on the back of the telephone base.

Plug the other end of the clear telephone line

cord into the LINE 1/L1+L2 telephone jack at

the back of the telephone base.

Plug the other end of

the black telephone

line cord into the

LINE 2 telephone jack

at the back of the

telephone base.

8

Getting started

Battery installation and charging

Install the battery, as shown below. Once you have installed the battery, the

screen indicates the battery status (see the following table). If necessary,

place the handset in the telephone base or charger to charge the battery. For

best performance, keep the handset in the telephone base or charger when

not in use. The battery is fully charged after 16 hours of continuous charging.

If the screen shows Place handset in charger and flashes, you need to

charge the handset without interruption for at least 30 minutes to give the

handset enough charge to use the telephone for a short time. The following

table summarizes the battery charge indicators and actions to take.

Battery indicators Battery status Action

The screen is blank, or

shows Place handset in

charger and (flashing).

Battery has no or very little

charge. The handset cannot

be used.

Charge without interruption

(at least 30 minutes).

The screen shows

Low battery and (flashing).

Battery has enough charge

to be used for a short time.

Charge without interruption

(at least 30 minutes).

The screen shows

HANDSET X.

Battery is charged. To keep the battery charged,

place it in the telephone base or

charger when not in use.

Step 1

Plug the battery connector securely into the socket inside the handset

battery compartment. Insert the supplied battery with the label THIS SIDE UP

facing up, as indicated.

NOTE: If you are on a phone call in low battery mode, you hear four short beeps every

minute.

THIS SI

DE

UP / CE

CÔ

TÉ

VERS LE HA

UT

Batt

e

r

y Pa

c

k / Bloc-piles

:

BT1833

42/BT283342 (2.4V 400mAh Ni-MH)

WA

RNING /

AV

ERTISSEMENT

:

D

O NOT BURN

O

R

PUNCTURE BA

TTERIES

.

NE

PA

S INCINÉRER

O

U PERCER LES PILES.

Made in

China / Fabriqué

en

chine BY

1021

THIS SIDE

Battery Pack / Bloc

BT183342/BT283342

W

ARNING /

AV

ERTISS

DO NOT BURN OR PU

N

NE

PA

S INCINÉRER

O

Made in China / Fa

9

Getting started

Step 2

Align the cover flat against the battery compartment, then slide it upwards

until it clicks into place.

Battery installation and charging

Step 3

Charge the handset by placing it face forward

in the telephone base or charger. The CHARGE

light under the screen of the handset is on during

charging.

IMPORTANT INFORMATION

Use only the supplied rechargeable battery or replacement battery (model BT183342/

BT283342). To order, visit our website at www.telephones.att.com or call

1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

If you do not use the handset for a long time, disconnect and remove the battery

to prevent possible leakage.

•

CHARGE light

After you install your telephone or power returns following a power outage,

you have to reset the date and time. For instructions, see Set date/time on

pages 15 and 21.

LE HA

UT

21

10

Getting started

Belt clip and optional headset

Belt Clip

Lift the plastic

cover.

Plug a 2.5mm headset into

the jack on the side of the

handset (beneath the small

plastic cover).

To remove the belt clip:

Gently lift either of the

belt clip tabs outwards to

remove the belt clip from

the handset.

To attach the belt clip:

Snap the belt clip into

the slots on both sides

of the handset.

Headset

For handsfree telephone conversation, you can use any industry standard

2.5mm headset (purchased separately). For best results, use an AT&T 2.5mm

headset. To purchase a headset, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial

1 (866) 288-4268.

Side view of handset

11

Handset settings

Use the menu to change the telephone settings.

1. Press the MENU soft key on the handset to enter the

main menu when the handset is not in use.

2. Press qCID or pDIR to scroll to SETTINGS, then press the

SELECT soft key.

3. Press qCID or pDIR to scroll to the desired item, then

press the SELECT soft key.

4. When you successfully change a setting, there is a

confirmation tone and the screen returns to the previous

menu.

NOTE: Press OFF/CANCEL or the BACK soft key to cancel an operation, back up to the

previous menu or exit the menu display. Press and hold OFF/CANCEL to return to idle mode.

MENU

HANDSET

12:45am 12/31

BACK SELECT

SETTINGS

Telephone settings

12

Telephone settings

Handset settings

Ringer volume

You can set the ringer volume level to one of six levels or turn the ringer off.

1. Press the MENU soft key when the handset is not in use.

2. Use qCID or pDIR to scroll to RINGERS, then press the

SELECT soft key.

3. Press the SELECT soft key again to select Ringer volume.

4. Press qCID or pDIR to choose Line 1, Line 2 or

Lines 1&2, then press the SELECT soft key.

5. Press qCID or pDIR to adjust the volume. A sample

of each ringer volume plays as you scroll through the

choices. Press the OFF soft key to turn off the ringer

and Ringer muted shows on the screen.

6. Press the SET soft key to save your setting or press

OFF/CANCEL to exit to the previous menu.

NOTES:

The handset ringer volume also determines the ringer volume for intercom calls.

If the ringer volume is set to off, that handset is silenced for all incoming calls.

If you turn off the ringer, a ringer off icon,

1

1,

1

2, or

1

2

1

of the respective phone line(s)

flashes on the screen.

Ringer tone

You can choose one of ten ringer tones.

1. Press the MENU soft key when the handset is not in use.

2. Use qCID or pDIR to scroll to RINGERS, then press the

SELECT soft key.

3. Press qCID or pDIR to scroll to Ringer tone, then press

the SELECT soft key.

4. Press qCID or pDIR to choose Line 1, Line 2 or

Lines 1&2, then press the SELECT soft key.

5. Press qCID or pDIR to sample each ringer tone.

6. Press the SET soft key to save your setting or press the

BACK soft key to exit to the previous menu.

NOTE: If you turn off the ringer volume, you will not hear ringer tone samples.

•

BACK

SELECT

RINGERS

Ringer volume

Ringer tone

BACK

SELECT

RINGER VOLUME

Line 1

Line 2

Lines 1&2

RINGER VOLUME

OFF

SET

BACK

SELECT

RINGERS

Ringer volume

Ringer tone

BACK

SELECT

RINGER TONE

Line 1

Line 2

Lines 1&2

BACK

RINGER TONE

1

2

3

SET

13

Telephone settings

Handset settings

LCD language

You can select the language used for all screen displays.

1. Press the MENU soft key when the handset is not in use.

2. Press qCID or pDIR to scroll to SETTINGS, then press the

SELECT soft key.

3. Press the SELECT soft key to select LCD language.

4. Press qCID or pDIR to choose English, Français or

Español. Press the SET soft key to save your setting, or

press the BACK soft key to exit to the previous menu.

Voicemail (visual message waiting) indicator

If you subscribe to voicemail service offered by your telephone service

provider, the

2

icon and a line number appear on both the handset and

telephone base when you have new voicemail messages. Contact your

telephone service provider for more information and assistance about using

your voicemail service.

Clear voicemail indicator

Use the clear voicemail indicator feature when the telephone indicates that

there is new voicemail but there are none (for example, when you have

accessed your voicemail while away from home). The clear voicemail feature

only turns off the indicators; it does not delete your voicemail messages. As

long as you have new voicemail messages, your telephone service provider

continues to send the signal that turns on the indicators.

1. Press the MENU soft key when the handset is not in use.

2. Press qCID or pDIR to scroll to SETTINGS, then press the

SELECT soft key.

3. Press qCID or pDIR to scroll to Clear voicemail, then

press the SELECT soft key.

4. Press qCID or pDIR to choose Line 1, Line 2, or

Lines 1&2, then press the SELECT soft key. The screen

shows Turn off indicator?.

5. Press the YES soft key to confirm, or press the NO soft

key to exit to the previous menu.

NOTES:

This feature does not indicate new messages recorded on your phone’s built-in answering

system.

For more information about the difference between your answering system and voicemail,

see page 68.

•

YES

Clear voicemail

Line 1

Line 2

Lines 1&2

BACK

SELECT

NO

Turn off

indicator?

BACK

SELECT

SETTINGS

LCD language

Clear voicemail

Key tone

BACK

SELECT

SETTINGS

LCD language

Clear voicemail

Key tone

BACK

SET

LCD LANGUAGE

English

Francais

Espanol

,

~

14

Telephone settings

Handset settings

Key tone

You can turn the key tone feature on or off. If you turn off the key tone, there

are no beeps when you press keys.

1. Press the MENU soft key when the handset is not in use.

2. Press qCID or pDIR to scroll to SETTINGS, then press the

SELECT soft key.

3. Press qCID or pDIR to scroll to Key tone, then press the

SELECT soft key.

4. Press qCID or pDIR to choose On or Off.

5. Press the SET soft key to save your setting, or press the

BACK soft key to exit to the previous menu.

SETTINGS

Clear voicemail

Key tone

Set date/time

BACK

SELECT

BACK

SET

KEY TONE

On

Off

La page charge ...

AT&T TL88102 Manuel utilisateur

Ce manuel convient également à

AT&T TL88102 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents