Sony Ht-Ct660 Manuel utilisateur

4-452-002-13(1)

HT-CT660

Home Theatre

System

Operating Instructions US

Mode d’emploi FR

Manual de instrucciones

ES

2

US

To reduce the risk of fire or

electric shock, do not expose this

apparatus to rain or moisture.

The unit is not disconnected from the AC

power source (mains) as long as it is

connected to the wall outlet, even if the

unit itself has been turned off.

To reduce the risk of fire, do not cover the

ventilation opening of the appliance with

newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked

flame sources (for example, lighted

candles).

To reduce the risk of fire or electric shock,

do not expose this appliance to dripping

or splashing, and do not place objects

filled with liquids, such as vases, on the

appliance.

As the main plug is used to disconnect

the unit from the mains, connect the unit

to an easily accessible AC outlet. Should

you notice an abnormality in the unit,

disconnect the main plug from the AC

outlet immediately.

Do not install the appliance in a confined

space, such as a bookcase or built-in

cabinet.

Do not expose batteries or appliances

with battery-installed to excessive heat,

such as sunshine and fire.

In door use only.

For the customers in the U.S.A

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous

voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

Owner’s Record

The model and serial numbers are

located on the rear oblique down-facing

surface of the unit. Record the serial

numbers in the space provided below.

Refer to them whenever you call upon

your Sony dealer regarding this product.

Model No. HT-CT660

Serial No.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer’s instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

WARNING

3

US

9) Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A

grounding type plug has two blades

and a third grounding prong. The

wide blade or the third prong are

provided for your safety. If the

provided plug does not fit into your

outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and

the point where they exit from the

apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart, stand, tripod,

bracket, or table specified by the

manufacturer, or sold with the

apparatus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in

any way, such as power-supply cord

or plug is damaged, liquid has been

spilled or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does not

operate normally, or has been

dropped.

The following FCC statement applies only

to the version of this model

manufactured for sale in the U.S.A. Other

versions may not comply with FCC

technical regulations.

NOTE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that

interference will not occur in a particular

installation. If this equipment does cause

harmful interference to radio or

television reception, which can be

determined by turning the equipment off

and on, the user is encouraged to try to

correct the interference by one or more

of the following measures:

 Reorient or relocate the receiving

antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

 Consult the dealer or an experienced

radio/TV technician for help.

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals in order to meet FCC

emission limits.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in

this manual could void your authority to

operate this equipment.

For the Sound Bar (SA-CT660)

The nameplate and the date of

manufacture marking are located on the

rear oblique down-facing surface.

continued

4

US

This equipment must not be co-located

or operated in conjunction with any other

antenna or transmitter.

This equipment complies with FCC

radiation exposure limits set forth for an

uncontrolled environment and meets the

FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65.

This equipment has very low levels of RF

energy that it deemed to comply without

maximum permissive exposure

evaluation (MPE). But it is desirable that it

should be installed and operated

keeping the radiator at least 20 cm or

more away from person’s body

(excluding extremities: hands, wrists,

feet and ankles).

For the customers in the Canada

Properly shielded and grounded cables

and connectors must be used for

connection to host computers and/or

peripherals.

Operation is subject to the following two

conditions:

(1) this device may not cause

interference, and (2) this device must

accept any interference, including

interference that may cause undesired

operation of the device.

This equipment complies with IC

radiation exposure limits set forth for an

uncontrolled environment and meets

RSS-102 of the IC radio frequency (RF)

Exposure rules.

This equipment has very low levels of RF

energy that it deemed to comply without

maximum permissive exposure

evaluation (MPE). But it is desirable that it

should be installed and operated

keeping the radiator at least 20 cm or

more away from person’s body

(excluding extremities: hands, wrists,

feet and ankles).

Precautions

On safety

Should any solid object or liquid fall into

the system, unplug the system and

have it checked by qualified personnel

before operating it any further.

Do not climb on the Sound Bar or the

subwoofer, as you may fall down and

injure yourself, or system damage may

result.

On power sources

Before operating the system, check that

the operating voltage is identical to

your local power supply. The operating

voltage is indicated on the nameplate

at the rear of the Sound Bar.

If you are not going to use the system

for a long time, be sure to disconnect

the system from the wall outlet (mains).

To disconnect the AC power cord

(mains lead), grasp the plug itself; never

pull the cord.

One blade of the plug is wider than the

other for the purpose of safety and will

fit into the wall outlet (mains) only one

way. If you are unable to insert the plug

fully into the outlet, contact your dealer.

AC power cord (mains lead) must be

changed only at the qualified service

shop.

On heat buildup

Although the system heats up during

operation, this is not a malfunction. If you

continuously use this system at a large

volume, the system temperature of the

back and bottom rises considerably. To

avoid burning yourself, do not touch the

system.

5

US

On placement

Place the system in a location with

adequate ventilation to prevent heat

buildup and prolong the life of the

system.

Do not place the system near heat

sources, or in a place subject to direct

sunlight, excessive dust, or mechanical

shock.

Do not place anything at the rear of the

Sound Bar that might block the

ventilation holes and cause

malfunctions.

If the system is being used in

combination with a TV, VCR, or tape

deck, noise may result, and picture

quality may suffer. In this case, place

the system away from the TV, VCR, or

tape deck.

Use caution when placing the system

on surfaces that have been specially

treated (with wax, oil, polish, etc.) as

staining or discoloration of the surface

may result.

Take care to avoid any possible injury

on the corners of the Sound Bar or the

subwoofer.

On operation

Before connecting other equipment, be

sure to turn off and unplug the system.

If you encounter color

irregularity on a nearby TV

screen

Color irregularities may be observed on

certain types of TV sets.

If color irregularity is

observed...

Turn off the TV set, then turn it on again

after 15 to 30 minutes.

If color irregularity is observed

again...

Place the system further away from the

TV set.

On cleaning

Clean the system with a soft dry cloth. Do

not use any type of abrasive pad,

scouring powder or solvent such as

alcohol or benzine.

If you have any question or problem

concerning your system, please consult

your nearest Sony dealer.

This system incorporates Dolby* Digital

and the DTS** Digital Surround System.

* Manufactured under license from

Dolby Laboratories.

Dolby, and the double-D symbol are

trademarks of Dolby Laboratories.

** Manufactured under license under

U.S. Patent Nos: 5,956,674; 5,974,380;

6,226,616; 6,487,535; 7,212,872;

7,333,929; 7,392,195; 7,272,567 &

other U.S. and worldwide patents

issued & pending. DTS-HD, the

Symbol, & DTS-HD and the Symbol

together are registered trademarks of

DTS, Inc.

Product includes software. © DTS, Inc.

The BLUETOOTH

®

word mark and logos

are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such

marks by Sony Corporation is under

license.

This system incorporates High-Definition

Multimedia Interface (HDMI™)

technology.

The terms HDMI and HDMI High-

Definition Multimedia Interface, and the

HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the

United States and other countries.

“BRAVIA” logo is a trademark of Sony

Corporation.

Copyrights

continued

6

US

“x.v.Color” and “x.v.Color” logo are

trademarks of Sony Corporation.

“WALKMAN” and “WALKMAN” logo are

registered trademarks of Sony

Corporation.

“PlayStation

®

” is a registered trademark

of Sony Computer Entertainment Inc.

The N Mark is a trademark or registered

trademark of NFC Forum, Inc. in the

United States and in other countries.

Android is a trademark of Google Inc.

Other trademarks and trade names are

those of their respective owners.

BLUETOOTH wireless

technology

Supported BLUETOOTH version

and profiles

Profile refers to a standard set of

capabilities for various BLUETOOTH

product capabilities. See

“Specifications” (page 34) on the

BLUETOOTH version and profiles

supp

orted by this system.

For you to use the BLUETOOTH

function, the BLUETOOTH device to be

connected must support the same

profile as this system. Even if the device

supports the same profile, the functions

may differ because of the specifications

of the BLUETOOTH device.

The audio playback on this system may

be delayed from that on the

BLUETOOTH device because of the

characteristics of the BLUETOOTH

wireless technology.

Effective communication range

BLUETOOTH devices should be used

within approximately 10 meters

(3

3 feet) (unobstructed distance) of

e

ach other. The effective

communication range may become

shorter under the following

conditions.

 When a person, metal object, wall or

other obstruction is between the

devices with a BLUETOOTH

connection

 Locations where a wireless LAN is

installed

 Around microwave ovens that are in

use

 Locations where other

electromagnetic waves occur

Effects of other devices

BLUETOOTH devices and wireless LAN

(IEEE 802.11b/g) use the same

frequency band (2.4 GHz). When using

yo

ur BLUETOOTH device near a device

with wireless LAN capability,

electromagnetic interference may

occur.

This could result in lower data transfer

rates, noise, or inability to connect. If

this happens, try the following

remedies:

 Try connecting this system and

BLUETOOTH mobile phone or

BLUETOOTH device when you are at

least 10 meters (33 feet) away from

the wireless LAN

equipment.

 Turn off the power to the wireless

LAN equipment when using your

BLUETOOTH device within 10 meters

(3

3 feet).

Notes

7

US

Effects on other devices

The radio waves broadcast by this

system may interfere with the

operation of some medical devices.

Since this interference may result in

malfunction, always turn off the power

on this system, BLUETOOTH mobile

phone and BLUETOOTH device in the

following locations:

 In hospitals, on trains, in airplanes, at

gas stations, and any place where

flammable gasses may be present

 Near automatic doors or fire alarms

This system supports security functions

that comply with the BLUETOOTH

specification as a means of ensuring

security during communication using

BLUETOOTH technology. However, this

security may be insufficient depending

on the setting contents and other

factors, so always be careful when

performing communication using

BLUETOOTH technology.

Sony cannot be held liable in any way

for damages or other loss resulting

from information leaks during

communication using BLUETOOTH

technology.

BLUETOOTH communication is not

necessarily guaranteed with all

BLUETOOTH devices that have the

same profile as this system.

BLUETOOTH devices connected with

this system must comply with the

BLUETOOTH specification prescribed by

the Bluetooth SIG, Inc., and must be

certified to comply. However, even

when a device complies with the

BLUETOOTH specification, there may be

cases where the characteristics or

specifications of the BLUETOOTH device

make it impossible to connect, or may

result in different control methods,

display or operation.

Noise may occur or the audio may cut

off depending on the BLUETOOTH

device connected with this system, the

communications environment, or

surrounding conditions.

Notes

8

US

Precautions ................................4

BLUETOOTH wireless

technology ...........................6

Getting Started

Unpacking ..................................9

Index to parts and controls .... 10

Connecting a TV, player,

etc. ...................................... 14

Positioning the system ........... 16

Setting up the Wireless

System ............................... 18

Operations and Features

Operating the system

using the supplied

remote control .................. 19

Using the Control for HDMI

function .............................. 19

Using “BRAVIA” Sync

features ............................. 20

Setting up the sound output

of the connected

equipment ......................... 21

BLUETOOTH Function

Using the BLUETOOTH

function ..............................22

Surround Function

Enjoying the surround

effect ..................................26

Advanced Settings

Settings and adjustments

using the AMP menu ........27

Linking the system (LINK) ...... 30

Additional Information

Troubleshooting ...................... 31

Specifications ..........................34

Index ........................................37

Table of contents

9

US

Getting Started

Unpacking

 Subwoofer (SA-WCT660) (1)

 Sound Bar (SA-CT660) (1)

 Digital optical cable for a TV (1)

 Side stand (for front-facing

installation) (2)

 Side stand (for upward-tilting

installation) (2)

 Remote control (RM-ANP105) (1)

 R6 (size AA) batteries (2)

 Operating Instructions (1)

Insert two R6 (size AA) batteries

(supplied

) by matching the  and 

ends on the batteries to the diagram

inside the battery compartment of the

remote control. To use the remote

control, point it at the remote control

sensor at the front of the Sound Bar.

Do not leave the remote control in an

extremely hot or humid place.

Do not use a new battery with an old

one.

Do not drop any foreign object into the

remote control casing, particularly

when replacing the batteries.

Do not expose the remote control

sensor to direct sunlight or lighting

apparatus. Doing so may cause a

malfunction.

If you do not intend to use the remote

control for an extended period of time,

remove the batteries to avoid possible

damage from battery leakage and

corrosion.

Getting Started

Inserting batteries into the

remote control

Notes

10

US

Index to parts and controls

For more information, see the pages indicated in parentheses.

 (on/standby) button

 PAIRING button (page 23)

 INPUT bu

tton

Press to select the input source to

play back.

 VO

L (volume) +/ buttons

 N mar

k

 (remote control sensor)

 Ill

umination LED

Lights up in white when the

sy

stem is on.

Lights up in blue in BLUETOOTH

mode.

 Fron

t panel display

 Me

ssage display area

Displays volume, selected input

sou

rce, etc.

 NIGHT (page 28)

Lights up in NIGHT mode.

 HDM

I

Lights up when an HDMI signal is

se

lected as the input source.

 OPT

Lights up when the signal from the

O

PTICAL IN jack is selected.

Sound Bar

11

US

Getting Started

 AC power cord (mains lead)

(page 14)

 H

DMI IN 1/IN 2 jacks (page 14)

 ANAL

OG IN jack (page 15)

 OPT

ICAL IN jack (page 14, 15)

 HD

MI TV OUT (ARC) jack

(page 14)

 HDMI IN 3

jack (page 14)

 (on/standby) indicator

 (on/stand

by) button

 LINK button (page 30)

 AC

power cord (mains lead)

(page 14)

Jacks (on the rear of Sound Bar)

Subwoofer

continued

12

US

This section describes how to operate

the subwoofer, Sound Bar, and

connected equipment using the

remote control supplied. If you cannot

operate the connected equipment,

use the remote control of the

equipment.

Point the remote control towards the

remote control sensor ( ) of the Sound

Bar.

*The  and VOL + buttons have a

tactile dot. Use it as a guide during

operation.

To control the system

 INPUT (page 19)

Press to select the equipment you

w

ant to use.

 (on/

standby)

 SO

UND FIELD +/ (page 26)

 SO

UND FIELD (page 26)

 DI

SPLAY

Each time you pre

ss the button,

the display turns on or off.

When the system is operated, the

display is lit for several seconds.

 MUT

ING

 VOL (volume) +*/

 AMP ME

NU (page 27)

 PA

IRING (page 23)

 RETURN button

Returns to the previous screen of

a

ny displayed menu.

 (return)

/  (select)/

 (proceed) or (enter)

Press , ,  or 

to select the

menu items. Then press to

enter the selection.

 SP

EAKER TV  AUDIO

Press to switch the output sound

(T

V or this system) from the

speakers.

To control a TV

 TV VOL (volume) +/

Adjusts the volume.

 TV CH (channel)

+/

Selects the next (+) or previous ()

c

hannel.

 TV IN

PUT

Selects input.

 TV  (on

/standby)

Turns on or off the TV that the

remote control is assigned to

op

erate.

Remote control

Note

13

US

Getting Started

To control a BLUETOOTH device

/

To go to the beginning of the

previ

ous or next music.

/

To fast reverse or to fast forward

t

he music when pressed during

playback.

 Play

back operation

* (playback)/ (pause)/

 (stop)

Starts/pauses/stops playback.

To

resume normal playback

during pause, press  (pause)

again.

The above explanations are intended to

serve as an example only. Depending on

the equipment, the above operations

may not be possible, or may operate

differently than described.

1 While holding down the TV 

button, press the button

corresponding to the

manufacturer.

2 While keeping TV  held

down, press .

3 Release TV .

Note

Setting manufacturer of

controllable TVs

Manufacturer Button

SONY  TV VOL +

Samsung  TV CH +

LG  SOUND FIELD +

Panasonic  TV VOL 

VIZIO  TV CH 

Sharp  SOUND FIELD 

Toshiba  STD

FUNAI  MOVIE

14

US

Connecting a TV, player, etc.

Before connecting the AC power cord (mains lead) to a wall outlet (mains),

connect all other equipment and a TV to the system. No cable connection is

required between the Sound Bar and the subwoofer because they can be

connected wirelessly.

Connecting a TV

If you connect the system to a TV compatible with the Audio Return Channel

(ARC) technology via an HDMI input jack with “ARC” indicated, you do not need

to connect a digital optical cable.

If the digital optical cable has a cap, remove it before connecting the cable.

You can see the letters “ARC” beside the TV’s HDMI jack if it is compatible with the

Audio Return Channel (ARC) technology. Even if you connect an HDMI cable to the

jack, if the HDMI input jack is not compatible with the Audio Return Channel (ARC)

technology, you cannot use the Audio Return Channel (ARC) technology.

The Audio Return Channel (ARC) technology is available only when the Control for

HDMI function is set to on. If the Control for HDMI function is set to off, use a digital

optical cable.

The HDMI jack connections have priority as the default setting when you connect

different equipment to the system using the OPTICAL IN and HDMI IN jacks.

Notes

TV

Digital optical cable for a TV

(supplied)

HDMI cable

(not supplied)

HDMI IN (ARC)

Digital Audio OUT

(optical)

15

US

Getting Started

Even if the system is turned off (active standby mode), the HDMI signal will be sent

from the connected equipment to the TV via the HDMI connection. You can enjoy

image and sound from the equipment on the TV.

Connecting equipment with an HDMI jack

Connecting audio equipment

When you connect a portable music player, etc. via its headphone jack to the ANALOG

IN jack of the system, adjust the volume on the portable music player to eliminate the

volume difference when you switch between the portable music player and other

input sources.

Tip

Note

“PlayStation

®

3,” Blu-ray Disc™ player,

DVD player, satellite tuner, cable

television tuner, etc.

HDMI cable

(not supplied)

HDMI OUT

Audio cable (not supplied)

Smartphone, “Walkman,” or

other audio equipment

Audio

signal OUT

16

US

Positioning the system

The illustrations below are examples of how to install the Sound Bar.

Take following precautions when installing the Sound Bar and the subwoofer.

 Do not block the ventilation holes on the rear panel.

 Do not place the Sound Bar and the subwoofer in a metal cabinet.

 Do not place an object such as an aquarium between the Sound Bar and the

subwoofer.

 Place the subwoofer close to the Sound Bar in a same room.

When the Sound Bar is placed in front of a TV, the TV may not be controlled with the

remote control of the TV. In that case, place the Sound Bar away from the TV. If the

remote control of the TV still cannot control the TV, set “IR REP” of the AMP menu to

“ON” (page 29).

Make sure that the remote control of the TV cannot control the TV, then set “IR REP”

to “ON”. If it is set to “ON” when the remote control can control the TV, appropriate

operation may not be obtained, because of the interference between the direct

command from the remote control and the command via the Sound Bar.

Installing the Sound Bar

 Installing the Sound Bar on a rack

(page 17)

 Installing the Sound Bar on a wall

(page 17)

Notes

17

US

Getting Started

To install the Sound Bar facing

front

1 Attach a side stand (for front-

facing installation) to each side.

To install the Sound Bar tilting

upward

1 Remove the center stand.

2 Attach a side stand (for upward-

tilting installation) to each side.

You can install the Sound Bar on the

wall.

Use screws that are suitable for the wall

material and strength. As a plaster

board wall is especially fragile, attach

the screws securely to a wall beam.

Install the Sound Bar on a vertical and

flat reinforced area of the wall.

Be sure to subcontract the installation

to Sony dealers or licensed contractors

and pay special attention to safety

during the installation.

Sony is not responsible for accidents or

damage caused by improper

installation, insufficient wall strength,

improper screw installation or natural

calamity, etc.

Installing the Sound Bar on

a rack

Center

stand

Installing the Sound Bar on

a wall

Notes

continued

18

US

1 Prepare screws (not supplied)

that are suitable for the holes on

the back of the Sound Bar.

2 Fasten the screws to the wall.

The screws should protrude 6 to

7

mm (approx. 1/4 inches).

3 Remove the center stand.

4 Hang the Sound Bar onto the

screws.

Align the holes on the back of the

Sound Bar to the screws, then

hang the Sound Bar onto the

2 screws.

Setting up the Wireless

System

The Sound Bar transmits sound from

the equipment to the subwoofer by

wireless communication.

1 Connect the AC power cord

(mains lead) of the Sound Bar to

a wall outlet (mains).

2 Connect the AC power cord

(mains lead) of the subwoofer

to a wall outlet (mains).

The  in

dicator of the

subwoofer lights up in red.

If it does not light up, press the

 button of the subwoofer and

wait for the indicator to light up in

red.

3 Press the  button of the

Sound Bar.

When the wireless connection is

made, the  indicator of the

subwoofer turns green. If it does

not turn green, perform the

operations of “Linking the system

(LINK)” (page 30).

Hole on the back of the Sound Bar

4 mm

(3/16 inches)

More than 25 mm (1 inch)

5 mm

(7/32 inches)

9 mm

(3/8 inches)

680 mm

(26 3/4 inches)

6 to 7 mm

(approx.

1/4 inches)

19

US

Operations and Features

Operating the system

using the supplied

remote control

1 Turn on the system.

2 Press INPUT to display the input

source on the front panel

display of the Sound Bar.

3 Adjust the volume by pressing

VOL +/.

The sound may be output from the TV’s

speaker. In this case, turn the volume of

the TV’s speaker down to minimum.

Using the Control for

HDMI function

By enabling the Control for HDMI

function (CTRL, page 28), and

connecting equipment that is

compa

tible with the Control for HDMI

function via an HDMI cable, operation

is simplified with the features below.

When you turn off the TV using

the

power button on the TV’s remote

control, the system and the connected

equipment turn off automatically.

If you turn on the syst

em while you are

watching the TV, the TV sound is

output from the speakers of the

system automatically. The volume of

the system is adjusted when you

adjust the TV volume.

If the TV sound was output from the

speakers of

the system the last time

you turned off the TV, the system is

turned on automatically when you

turn on the TV again, and the TV sound

is output from the speakers of the

system automatically.

If the TV is compatible

with the Audio

Return Channel (ARC) technology, an

HDMI cable connection also sends a

digital audio signal from the TV to the

system. You do not need to make a

separate audio connection for

listening to TV sound from the system

(ARC, page 28).

Operations and Features

Input source Playable equipment

TV TV connected to the

HDMI TV OUT (ARC) or

OPTICAL IN jack

HDMI 1 Equipment connected

to the HDMI IN 1 jack

HDMI 2 Equipment connected

to the HDMI IN 2 jack

HDMI 3 Equipment connected

to the HDMI IN 3 jack

ANALOG Equipment connected

to the ANALOG IN jack

BT AU BLUETOOTH device

connected

Tip

System Power Off

System Audio Control

Audio Return Channel

(ARC)

continued

20

US

When you play the equipment

connected to the system with an HDMI

cable, the connected TV is turned on

automatically and the input signal of

the system is switched to the

appropriate HDMI input.

The above features may not operate

with certain equipment.

Depending on the settings of the

connected equipment, the Control for

HDMI function may not work correctly.

Refer to the operating instructions of

the equipment.

Using “BRAVIA” Sync

features

The original Sony functions listed

below can also be used with products

that are compatible with “BRAVIA”

Sync.

If a “BRAVIA” Sync-compatible TV is

c

onnected to the system, the power

consumption is reduced in standby

mode by stopping HDMI signal

transmission when TV is turned off

(P. THRU, page 28).

If a “Scene Select”-compatible TV is

c

onnected to the system, the sound

field changes automatically,

optimized according to the program

currently playing on the connected TV.

 Use a High Speed HDMI cable. If you

use a Standard HDMI cable, 1080p,

Deep Color, or 3D/4K images may

not be displayed properly.

 We recommend that you use an

HDMI authorized cable or a Sony

HDMI cable.

 We do not recommend using an

HDMI-DVI conversion cable.

 Check the setup of the connected

equipment if an image is poor or the

sound does not come out of the

equipment connected via the HDMI

cable.

 Audio signals (sampling frequency,

bit length, etc.) transmitted from an

One-Touch Play

Notes

Power save

Scene Select

Notes on HDMI

connections

La page charge ...

Sony Ht-Ct660 Manuel utilisateur

Ce manuel convient également à

Sony Ht-Ct660 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents