Silvercrest 279882 Operating Instructions Manual

WIRELESS DOORBELL SFKS 2 B1

IAN 279882

WIRELESS DOORBELL

Operating instructions

TRÅDLØS DØRKLOKKE

Betjeningsvejledning

DRAADLOZE DEURBEL

Gebruiksaanwijzing

SONNETTE SANS FIL

Mode d‘emploi

FUNKTÜRKLINGEL

Bedienungsanleitung

GB / IE / NI Operating instructions Page 1

DK Betjeningsvejledning Side 25

FR / BE Mode d’emploi Page 51

NL / BE Gebruiksaanwijzing Pagina 77

DE / AT / CH Bedienungsanleitung Seite 103

Before reading, unfold the page containing the illustrations

and familiarise yourself with all functions of the device.

Før du læser, vend siden med billeder frem og bliv bekendt

med alle apparatets funktioner.

Avant de lire le mode d’emploi, ouvrez la page contenant

les illustrations et familiarisez-vous ensuite avec toutes les

fonctions de l’appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open

en maak u vertrouwd met alle functies van het apparaat.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen

aus und machen Sie sich anschließend mit allen Funktionen

des Gerätes vertraut.

A

C

B

5 x 2 x 2 x

SFKS 2 B1

GB

│

IE

│

NI

│

1 ■

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Warnings used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Basic safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . .5

Descriptions of components . . . . . . . . . . . . . .9

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Check the package contents . . . . . . . . . . . . . . . . . . .10

Disposal of packaging materials . . . . . . . . . . . . . . . . .11

Power supply: receiver . . . . . . . . . . . . . . . . . . . . . . . .11

Inserting/replacing the batteries . . . . . . . . . . . . . . . . .11

Handling and operation . . . . . . . . . . . . . . . .13

Selecting the signal type . . . . . . . . . . . . . . . . . . . . . . .13

Adjusting the signal sound volume . . . . . . . . . . . . . . .13

Selecting the ringer melody . . . . . . . . . . . . . . . . . . . .14

Synchronising the sender and receiver

. . . . . . . . . . . .14

Mounting the transmitter . . . . . . . . . . . . . . . . . . . . . .15

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . .16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .16

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Storage when not in use . . . . . . . . . . . . . . . .18

IB_279882_SFKS2B1_LB6-.indb 1 29.08.16 14:41

SFKS 2 B1

■ 2

│

GB

│

IE

│

NI

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Disposal of the appliance . . . . . . . . . . . . . . . . . . . . . .18

Disposal of batteries . . . . . . . . . . . . . . . . . . . . . . . . . .19

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Notes on the Declaration of Conformity . . . . . . . . . . .20

Kompernass Handels GmbH warranty . . . . . . . . . . . .21

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

IB_279882_SFKS2B1_LB6-.indb 2 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

3 ■

Introduction

Congratulations on the purchase of your new

appliance.

You have selected a high-quality product. The oper-

ating instructions are part of this product. They contain

important information on safety, usage and disposal.

Before using the product, familiarise yourself with

all handling and safety guidelines. Use the product

only as described and for the range of applications

speciﬁ ed. Keep these operating instructions in a safe

place. Please also pass these operating instructions

on to any future owner.

Intended use

This appliance serves as a wireless doorbell system

to announce visitors, allowing for the operation of

a door bell without any wiring. The appliance is not

intended for any other purpose, nor for use beyond

the scope described. The appliance is not intended

for use in commercial or industrial environments. The

manufacturer accepts no responsibility for damage

caused by failure to observe these instructions,

improper use or repairs, unauthorised modiﬁ cations

or the use of unapproved replacement parts. The risk

shall be borne solely by the user.

IB_279882_SFKS2B1_LB6-.indb 3 29.08.16 14:41

SFKS 2 B1

■ 4

│

GB

│

IE

│

NI

Warnings used

The following warning notice types are used in

these operating instructions:

DANGER

A warning notice at this hazard level

indicates an imminently hazardous

situation.

If the hazardous situation is not avoided, it could

result in death or serious physical injury.

► Follow the instructions in this warning notice to

avoid the risk of death or serious injury.

CAUTION!

A warning notice at this hazard level

indicates a potential for property dam-

age.

Failure to avoid this situation could result in prop-

erty damage.

► Follow the instructions in this warning notice to

prevent property damage.

NOTE

►

A note provides additional information that will

assist you in using the appliance.

IB_279882_SFKS2B1_LB6-.indb 4 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

5 ■

Safety

This section contains important safety instructions for

using the appliance. This appliance complies with

statutory safety regulations. Improper use may result

in personal injury and property damage.

Basic safety guidelines

■ This appliance may be used by children aged

8 years and above and by persons with limited

physical, sensory or mental capabilities, or lack

of experience and knowledge, provided that

they are under supervision or have been told how

to use the appliance safely and are aware of the

potential risks. Children must not use the appli-

ance as a plaything. Cleaning and user mainte-

nance tasks may not be carried out by children

unless they are supervised.

■ The mains plug is used as a separator from the

electricity grid and must always be readily ac-

cessible.

■ Risk of explosion if the battery is replaced incor-

rectly. Replace only with the same or equivalent

type.

■ Do not place any sources of naked ﬂ ames, such

as lighted candles, on the appliance.

IB_279882_SFKS2B1_LB6-.indb 5 29.08.16 14:41

SFKS 2 B1

■ 6

│

GB

│

IE

│

NI

■ Check the appliance for visible external damage

before use. Do not operate an appliance that

has been damaged or dropped.

■ Do not expose the appliance to direct sunlight

or high temperatures. Otherwise it may overheat

and be irreparably damaged.

■ Do not expose the receiver to water spray or

drips, and do not place liquid-ﬁ lled objects such

as vases or open drink containers on or near the

receiver.

■ Warning: electrical voltage!

Never open the housing of the receiver. There

are no user-serviceable or replaceable compo-

nents inside the appliance.

■ Do not make any unauthorised modiﬁ cations or

alterations to the appliance.

■ All repairs must be carried out by authorised

specialist companies or by the Customer Service

department. Improper repairs may put the user at

risk. It will also invalidate any warranty claims.

■ Unplug the appliance immediately if you smell

burning or notice smoke. Have the appliance

checked by a qualiﬁ ed specialist before using it

again.

IB_279882_SFKS2B1_LB6-.indb 6 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

7 ■

DANGER

Mishandling the batteries can cause ﬁ res,

explosions, leakages or other hazards!

In order to handle batteries safely, please

observe the following safety instructions:

► Do not throw the batteries into a ﬁ re and do not

subject them to high temperatures.

► Do not open, deform or short-circuit batteries,

since this can lead to chemical leakage.

► Do not attempt to recharge the batteries.

► Check the condition of the batteries at regular

intervals. Leaking chemicals can cause permanent

damage to the appliance. Take particular care

when handling damaged or leaking batteries.

Risk of acid burns! Wear protective gloves.

► Chemicals that leak from a battery can cause

skin irritation. In the event of contact with the

skin, rinse with plenty of water. If the chemicals

come into contact with your eyes, rinse thorough-

ly with water, do not rub and consult a doctor

immediately.

► Keep batteries out of the reach of children.

Children might put batteries into their mouth and

swallow them. If a battery has been swallowed,

seek medical assistance IMMEDIATELY.

IB_279882_SFKS2B1_LB6-.indb 7 29.08.16 14:41

SFKS 2 B1

■ 8

│

GB

│

IE

│

NI

DANGER

►

Always insert the batteries the right way round

(observe correct polarity) otherwise there is a

danger that they could explode.

► If you do not intend to use the appliance for a

long time, remove the batteries.

► Do not ingest the battery – there is a risk of

chemical burns!

► This product contains a button cell battery.

Swallowing the button cell battery can cause

severe internal burns in just 2 hours and can lead

to death.

► Keep new and old batteries away from children.

► If the battery compartment does not close

securely, stop using the product and keep it away

from children.

DANGER

Do not allow children to play with the packaging

material! Keep all packaging materials out of the

reach of children. Risk of suﬀ ocation!

IB_279882_SFKS2B1_LB6-.indb 8 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

9 ■

Descriptions of components

(See fold-out page for illustrations)

Receiver (Fig. A)

1 Speaker

2 Signal display

3 Signal type switch (optical/acoustic)

4 Volume button (VOL)

5 Melody selection button

6 Synchronisation button

Sender (Fig. B)

7 Nameplate cover

8 Ringer button

9 Battery compartment

0 Battery compartment cover

q Mounting plate

Accessories (Fig. C)

w Double-sided adhesive tape

e Name plate

r Wall plug

t Screw

z 3V battery, type CR2032

IB_279882_SFKS2B1_LB6-.indb 9 29.08.16 14:41

SFKS 2 B1

■ 10

│

GB

│

IE

│

NI

Operation

Check the package contents

(See fold-out page for illustrations)

The scope of delivery includes the following compo-

nents:

● 1 x receiver

● 1 x sender

● 1 x 3V battery, type CR2032

● 5 x name plates

● 2 x wall plugs with screws for sender assembly

● 1 x double-sided adhesive tape

● These operating instructions

♦ Remove all parts of the appliance from the pack-

aging and remove all packaging materials.

♦ Check the package for completeness and for

signs of visible damage.

♦ If the delivery is incomplete or damage has

occurred as a result of defective packaging or

during transport, contact the Service hotline (see

chapter entitled Service).

IB_279882_SFKS2B1_LB6-.indb 10 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

11 ■

Disposal of packaging materials

The packaging protects the appliance from damage

during transport. The packaging materials have

been selected for their environmental friendliness

and ease of disposal, and are therefore recyclable.

Returning the packaging into the material

cycle conserves raw materials and

reduces the amount of waste generated.

Dispose of packaging materials that are no longer

needed in accordance with applicable local regu-

lations.

Power supply: receiver

The receiver is plugged into a properly installed

mains power outlet and does not require batteries.

Inserting/replacing the batteries

♦ Detach the mounting plate q from the transmitter.

♦ Grip the battery compartment cover 0 on both

tabs and pull it oﬀ .

♦ Insert a 3V battery, type CR 2032, into the

battery compartment 9. The side of the battery

marked with a “+” must be facing upwards.

IB_279882_SFKS2B1_LB6-.indb 11 29.08.16 14:41

SFKS 2 B1

■ 12

│

GB

│

IE

│

NI

♦ Slide the battery compartment cover 0 back

onto the battery compartment 9 until it clicks

into place. Ensure that the sealing ring is

properly inserted into the frame of the battery

compartment 9. Otherwise, IP protection is not

provided.

♦ To reattach the mounting plate

q

to the transmit-

ter, hook one side of the transmitter into the gap

of the mounting plate

q

, then push the transmit-

ter downwards until it clicks into place.

NOTE

►

If the performance of appliance reduces or com-

pletely stops, it means the battery is exhausted.

Replace the used battery with a new one of the

same type.

IB_279882_SFKS2B1_LB6-.indb 12 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

13 ■

Handling and operation

Selecting the signal type

The receiver can indicate the reception of a door-

ring signal either optically, acoustically, or optically

and acoustically.

♦ To select, move the signal type switch 3 to the

desired position:

— acoustic ringer signal only, the selected

melody will be played

— optical ringer signal only, the signal

display ﬂ ashes

— optical and acoustic ringer signal

Adjusting the signal sound volume

Press the VOL

button

4

repeatedly until the desired

volume is set.

Loud Medium Quiet

IB_279882_SFKS2B1_LB6-.indb 13 29.08.16 14:41

SFKS 2 B1

■ 14

│

GB

│

IE

│

NI

Selecting the ringer melody

There are 36 diﬀ erent ringer melodies stored in the

appliance.

♦ Press the melody select button 5.

♦ Stop the selection when you hear the desired

melody. The appliance will use the last-played

melody.

NOTE

►

If you remove the receiver from the mains socket,

the set melody remains saved for approximately

40 seconds. After this time, you need to set your

desired melody anew.

Synchronising the sender and receiver

The transmitter and receiver of this wireless doorbell

system can communicate with each other via a num-

ber of diﬀ erent codings. This means that you can

operate up to 5 transmitters with one receiver. In ad-

dition, you can extend the wireless doorbell system

with any number of receivers. This is only possible if

the sender and receiver within a system are working

on the same frequency, however. For this, you must

synchronise the appliances as follows:

♦ Press the synchronisation button 6 on the

receiver.

♦ Now press the ringer button 8 on the transmitter.

IB_279882_SFKS2B1_LB6-.indb 14 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

15 ■

If the synchronisation has been a success, the

receiver notiﬁ es you of the programmed call signal.

Should the receiver not react as described, repeat the

synchronisation.

Mounting the transmitter

♦ Select a suitable positioning for the sender, close

to your outer door.

♦ Mark the positions for the required drill holes

with the help of the mounting plate q and drill

the holes for the supplied wall plugs r (6mm

drill).

♦ Push the wall plugs into the drill holes and screw

the mounting plate q onto the wall using the

screws t.

♦ Push the transmitter onto the mounting plate q

until it clicks audibly into place.

NOTE

►

Alternatively, you can mount the transmitter

onto a suitable surface using the double-sided

adhesive tape w.

♦ Label one of the supplied name plates e. If you

label the name plate by hand, make sure you

use a waterproof pen.

IB_279882_SFKS2B1_LB6-.indb 15 29.08.16 14:41

SFKS 2 B1

■ 16

│

GB

│

IE

│

NI

♦ Remove the name plate cover 7 from the trans-

mitter and insert your name plate into the recess

on the transmitter.

♦ Replace the name plate cover 7 on the trans-

mitter.

Maintenance

The appliance is maintenance-free. No form of

maintenance, either on or in the appliance, is

intended for execution by the user. In the event of

malfunction or apparent damage, contact Customer

Services. If the appliance is not going to be used for

an extended period, remove the batteries.

Troubleshooting

There is no ring when pressing the ringer

button

♦ Check whether there is a battery (type CR2032)

in the transmitter.

♦ Check whether the power outlet being used for

the receiver is working properly.

♦ It is possible that the transmitter is not synchro-

nised with the receiver. Repeat the synchronisa-

tion.

♦ Ensure that the signal type switch is set to the

position

or .

IB_279882_SFKS2B1_LB6-.indb 16 29.08.16 14:41

SFKS 2 B1

GB

│

IE

│

NI

│

17 ■

The range is reduced

♦ A weak battery will reduce the range. Change

the battery every 12–18 months.

♦ Metal constructions, walls, ceilings or other ap-

pliances that use the same frequency can aﬀ ect

the range. Try to avoid mounting the transmitter

in the immediate vicinity of any metal parts.

NOTE

►

If you cannot solve the problem with the

above-mentioned solutions, please contact the

Service Hotline (see chapter entitled Service).

Cleaning

CAUTION!

►

There are no serviceable parts or parts requiring

cleaning inside the appliance. Moisture can

cause damage to the appliance.

► Do not use caustic, abrasive or solvent-based

cleaning materials. These can damage the surfac-

es of the appliance.

♦ Clean the housing of the appliance with a lightly

moistened cloth and a mild detergent only.

IB_279882_SFKS2B1_LB6-.indb 17 29.08.16 14:41

La page charge ...

Silvercrest 279882 Operating Instructions Manual

Ce manuel convient également à

Silvercrest 279882 Operating Instructions Manual

dans d''autres langues

Documents connexes

Autres documents