Automate 4208A Le manuel du propriétaire

OWNER’S GUIDE

MODEL

4208A

4108A

Since its inception, Directed has had

one purpose, to provide consum-

ers with the finest vehicle security and

accessories available. The recipient

of nearly 100 patents and Innovations Awards

in the field of advanced electronic technology.

Quality Directed products are sold and ser-

viced throughout North America and around

the world.

Call (800) 274-0200 for more information

about our products and ser vic es.

Vista, CA 92081

Directed is committed to delivering world-

class quality products and services that excite

and delight our customers.

Vehicle Security System

G4208AML 2012-12

©

www.automatecarsecurity.com

Contents

Remote Control ...................................................................................................2

Using your System ............................................................................................... 3

Commanding the system ....................................................................... 3

Performing Commands ......................................................................... 3

Remote Control Command table ............................................................ 4

Basic Commands ................................................................................................. 5

Lock ................................................................................................... 5

Unlock ................................................................................................ 5

Remote Start ........................................................................................ 5

AUX ................................................................................................... 6

Remote Start Features .......................................................................................... 6

Disabling Remote Start ......................................................................... 6

Additional Remotes ............................................................................................. 6

Battery Information .............................................................................................. 7

Battery Replacement ............................................................................. 7

Battery Disposal .................................................................................. 7

Government Regulations ......................................................................................8

Warning! Safety First ........................................................................................... 9

Limited Lifetime Consumer Warranty ................................................................... 11

Remote Control

LED: Active during communication

Lock: Locks vehicle

Unlock: Unlocks vehicle

AUX: Operates optional accessory when held

Remote Start

Internal Antenna: transmits information

Confirmation LEDs

Feature Description

Internal Antenna Used for transmitting information

Transmit LED Active when transmitting information

Command buttons (4) Used to perform locking, unlocking, auxiliary channel and

remote start commands

Confirmation LEDs* Each button has an associated LED on it that is active

during related operations. These LED’s are labeled respec-

tively as: Lock LED, Unlock LED, Aux LED, Remote Start LED

* The 1-way remote control (7143A) does not have Conﬁrmations

LEDs.

3

Using your System

Commanding the system

Commands, Basic or Advanced, are used to activate system features

and are performed by pressing one of the Command buttons. Basic

commands control the most often used keyless entry and remote start

features while Advanced commands control more specialized fea-

tures.

Conﬁrmations for Basic or Advanced commands are indicated by

parking light ﬂashes. A description of each feature conﬁrmation is

found in the following Basic command and Advanced command sec-

tions.

Performing Commands

Perform basic commands by pressing a command button.

Perform advanced commands by ﬁrst pressing

AUX

and then by

pressing a command button.

4

Remote Control Command table

Button

Action

Press and Release

Shift (Press/release

“AUX” ﬁrst)

Press/Hold

for 2 secs.

Lock No function Lock, Panic and Car

Finder**

Unlock No function No Function

Shift* No function Optional accessory**

Remote Starter No function No function

* Advanced commands are performed by pressing and releasing

the AUX button before pressing the command button to perform

the action listed in the Shift column.

** Vehicle specific. Please refer to your local 12-volt retailer for more

information.

If a feature cannot be activated when performing a command with the

2-way remote control, a fault tone plays as an alert.

5

Basic Commands

Lock

Press and release

Doors lock, lights ﬂash, and the horn sounds once (if available), the

2-way (7243A) remote control emits tones.

To Lock and Panic/Car Finder

Press and hold

To lock the system, then activate Panic/Car Finder.

Panic/Car Finder is vehicle speciﬁc. Refer to your local 12-volt

retailer for more information. The 2-way (7243A) remote control

emits a single tone. Press the

or button to stop Panic out-

put.

Unlock

Press and release

Doors unlock, lights ﬂash, the horn sounds twice (if available), the

2-way (7243A) remote control emits tones.

Remote Start

Press and release .

Activates (or if On, deactivates) the remote starter. The engine turns

On, or the engine turns Off accordingly. If a Remote start conﬁgura-

tion issue prevents the engine from starting, the parking lights ﬂash

a Remote Start fault report to identify the fault. The 2-way (7243A)

remote control emits tones.

6

AUX*

Press and hold

AUX

Activates optional accessory (such as trunk release or power lift gate)

when this button is pressed for 2 seconds. The 2-way (7243A) remote

control emits tones.

* AUX is vehicle speciﬁc. Refer to your local 12-volt retailer for

more information.

Remote Start Features

Disabling Remote Start

Remote start can be disabled by moving the Toggle Switch to the On

position. If remote start is attempted while the toggle switch is On,

the engine will not start. Move the switch back to the Off position to

resume normal operation.

Note

Consult your local 12-volt retailer for the location of the

Toggle switch.

Additional Remotes

This device does not support end user programming. To add a new

remote, please consult your local 12-volt retailer to have one pro-

grammed for you.

7

Battery Information

The remote controls are powered by coin cell batteries (CR-2032)

that can be purchased at most retailers. When batteries begins to

weaken, the operating range will be reduced. The information and

precautions in this section can help maximize your battery’s life and

usage in providing you with many years of trouble free operation.

Battery Replacement

1. Unscrew the hardware on unit rear and remove from housing.

2. Hold the unit base with one hand and gently twist and pull the

main housing body with the other. This releases all parts of the

housing assembly.

3. Remove battery from clip and replace with a new one while

observing the correct polarity.

4. Reassemble unit and secure with hardware.

Battery Disposal

Directed cares about the environment. If you need to dis-

pose of the battery, please do so in accordance with your

municipal requirements for battery disposal.

8

Government Regulations

This device complies with Part 15 of FCC rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesirable

operation.

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television, which

can be determined by turning the equipment OFF and ON, the user is encouraged to try

to correct the interference by one or more of the following measures:

s Reorient or relocate the receiving antenna.

s Increase the separation between the equipment and receiver.

s Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

s Consult the dealer or an experienced radio / TV technician for help.

This device complies with the Industry Canada Radio Standards Specification RSS 210.

Its use is authorized only on a no-interference, no-protection basis; in other words, this

device must not be used if it is determined that it causes harmful interference to services

authorized by IC. In addition, the user of this device must accept any radio interference

that may be received, even if this interference could affect the operation of the device.

WARNING! Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this device.

9

Warning! Safety First

Please read the safety warnings below before proceeding. Improper use of the

product may be dangerous or illegal.

Installation

Due to the complexity of this system, installation of this product must only be performed

by an authorized Directed dealer. If you have any questions, ask your retailer or contact

Directed directly at 1-800-753-0600.

Remote Start Capable

When properly installed, this system can start the vehicle via a command signal from

the remote control transmitter. Therefore, never operate the system in an enclosed area

or partially enclosed area without ventilation (such as a garage). When parking in an

enclosed or partially enclosed area or when having the vehicle serviced, the remote start

system must be disabled using the installed toggle switch. It is the user’s sole responsibil-

ity to properly handle and keep out of reach from children all remote control transmitters

to assure that the system does not unintentionally remote start the vehicle. THE USER

MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA

ADJACENT TO THE VEHICLE. ALL DOORS LEADING FROM ADJACENT LIVING AREAS

TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE STORAGE AREA MUST AT

ALL TIMES REMAIN CLOSED. These precautions are the sole responsibility of the user.

WARNING! It is the responsibility of the owner to ensure the parking/emergency brake

properly functions. Failure to do so can result in personal injury or property damage.

We recommend the owner have the parking / emergency brake system inspected and

adjusted by a qualified automotive shop biannually.

Use of this product in a manner contrary to its intended mode of operation may result

in property damage, personal injury, or death. (1) Never remotely start the vehicle with

the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition.

The user must also have the neutral safety feature of the vehicle periodically checked,

wherein the vehicle must not remotely start while the car is in gear. This testing should be

performed by an authorized Directed dealer. If the vehicle starts in gear, cease remote

start operation immediately and consult with the authorized Directed dealer to fix the

problem. All installations must be performed by an authorized Directed dealer.

OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS

CONTRARY TO ITS INTENDED MODE OF OPERATION. OPERATING THE REMOTE

START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE

OR PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT

AND SEEK THE ASSISTANCE OF AN AUTHORIZED Directed DEALER TO REPAIR OR

10

DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED WILL NOT BE

HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.

This product is designed for fuel injected vehicles only.

Interference

All radio devices are subject to interference which could affect proper performance.

Upgrades

Any upgrades to this product must be performed by an authorized Directed dealer. Do

not attempt to perform any unauthorized modifications to this product.

Water/Heat Resistance

This product is not designed to be water and/or heat-resistant. Please take care to keep

this product dry and away from heat sources. Any damage from water or heat will void

the warranty.

11

Limited Lifetime Consumer Warranty

Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace

(at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf-

ter the “unit”), excluding without limitation the siren, the remote transmitters, the associated

sensors and accessories, which proves to be defective in workmanship or material under

reasonable use during the lifetime of the vehicle provided the following conditions are

met: the unit was purchased from an authorized Directed dealer, the unit was profession-

ally installed and serviced by an authorized Directed dealer; the unit will be professionally

reinstalled in the vehicle in which it was originally installed by an authorized Directed

dealer; and the unit is returned to Directed, shipping prepaid with a legible copy of the

bill of sale or other dated proof of purchase bearing the following information: consumer’s

name, telephone number and address; the authorized dealers name, telephone number

and address; complete product description, including accessories; the year, make and

model of the vehicle; vehicle license number and vehicle identification number. All com-

ponents other than the unit, including without limitation the siren, the remote transmitters

and the associated sensors and accessories, carry a one-year warranty from the date of

purchase of the same. ALL PRODUCTS RECEIVED BY DIRECTED FOR WARRANTY REPAIR

WITHOUT PROOF OF PURCHASE FROM AN AUTHORIZED DEALER WILL BE DENIED.

This warranty is non-transferable and is automatically void if: the unit’s date code or serial

number is defaced, missing or altered; the unit has been modified or used in a manner

contrary to its intended purpose; the unit has been damaged by accident, unreasonable

use, neglect, improper service, installation or other causes not arising out of defects in

materials or construction. The warranty does not cover damage to the unit caused by

installation or removal of the unit. Directed, in its sole discretion, will determine what con-

stitutes excessive damage and may refuse the return of any unit with excessive damage.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING

BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY

OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF

NON-INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED;

AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY

TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION

WITH ITS PRODUCTS. DIRECTED DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY

FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED

DEALERS OR INSTALLERS. DIRECTED SECURITY SYSTEMS, INCLUDING THIS UNIT,

ARE DETERRENTS AGAINST POSSIBLE THEFT. DIRECTED IS NOT OFFERING A

GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE OR THEFT OF THE

AUTOMOBILE, ITS PARTS OR CONTENTS; AND HEREBY EXPRESSLY DISCLAIMS ANY

LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,

DAMAGE AND/OR VANDALISM. THIS WARRANTY DOES NOT COVER LABOR

COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR

ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM

OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE

SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS

AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE

MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY

LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.

DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER,

INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL

DAMAGES, DAMAGE TO VEHICLE, DAMAGES FOR THE LOSS OF TIME, LOSS OF

EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE

LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A

LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE SUBJECT TO

THE CONDITIONS AS DESCRIBED HEREIN. THIS WARRANTY IS VOID IF THE UNIT

HAS NOT BEEN PURCHASED FROM DIRECTED, OR AN AUTHORIZED DIRECTED

DEALER, OR IF THE UNIT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE

USE, NEGLIGENCE, ACTS OF GOD, NEGLECT, IMPROPER SERVICE, OR OTHER

CAUSES NOT ARISING OUT OF DEFECT IN MATERIALS OR CONSTRUCTION.

Some states do not allow limitations on how long an implied warranty will last or the

exclusion or limitation of incidental or consequential damages. This warranty gives you

specific legal rights and you may also have other rights that vary from State to State.

This warranty is only valid for sale of product(s) within the United States of America and

in Canada. Product(s) sold outside of the United States of America or Canada are sold

“AS-IS” and shall have NO WARRANTY, express or implied.

For further details relating to warranty information of Directed products, please visit the

support section of Directed’s website at: www.directed.com.

This product may be covered by a Guaranteed Protection Plan (“GPP”). See your

authorized Directed dealer for details of the plan or call Directed Customer Service at

1-800-876-0800.

920-10011-01 2011-06

Contenu

Télécommande .................................................................................................... 4

L’utilisation de votre système ................................................................................. 5

Les commandes votre système ............................................................... 5

Exécution des commandes .................................................................... 5

Tableau des commandes de la télécommande ......................................... 6

Commandes de base .......................................................................................... 7

Verrouillage ........................................................................................ 7

Déverrouillage ..................................................................................... 7

Démarrage à distance .......................................................................... 7

AUX ................................................................................................... 8

Caractéristique de démarrage à distance .............................................................. 8

Désactiver le démarrage à distancet ...................................................... 8

Télécommandes additionnelles ............................................................................. 8

Information sur la batterie .................................................................................... 9

Remplacement la batterie ...................................................................... 9

Élimination de la batterie ...................................................................... 9

Règlementations gouvernementales ..................................................................... 10

Avertissement! La sécurité d’abord ...................................................................... 11

Garantie à vie limitée pour l’utilisateur ................................................................ 13

4

Télécommande

DEL: activée pendant la communication

Verrouillage: Verrouillage du véhicule

Déverrouillage: Déverrouillage du véhicule

AUX:Lorsque maintenu, fait fonctionner les

accessoires optionnels

Démarrage à distance

Antenne interne: transmet l’information

DEL de confirmation

Caractéristiques Description

Antenne interne Utilisée pour la transmission de l’information

DEL de transmission Activée lors de la transmission de l’information

Command buttons (4) Utilisés pour les commandes de verrouillage, déverrouillage,

auxiliaires et démarrage à distance.

DEL de confirmation* Chaque bouton à son propre DEL qui sera activée lors des

opérations connexes. Les DELs sont étiquetées respective-

ment : DEL Verrouillage, DEL Déverrouillage, DEL Aux, DEL

Démarrage à distance.

* La télécommande unidirectionnelle (7143A) n’a aucun DEL de con-

ﬁrmation.

5

L’utilisation de votre système

Les commandes votre système

Les commandes de base ou avancées sont utilisées pour activer les

fonctions du système et sont activées en appuyant sur un des boutons

de commande. Les commandes de base contrôlent les fonctions utili-

sées plus fréquemment telles que télédéverrouillage et démarrage à

distance, tandis que les commandes avancées contrôlent les fonctions

plus spécialisées.

Les conﬁrmations pour les commandes de base et les commandes

avancées sont indiquées par les clignotements des feux de sta-

tionnement. Une description de chaque fonction de conﬁrmation

se retrouve dans les sections commandes de base et commandes

avancées.

Exécution des commandes

Exécuter une commande de base en appuyant sur un bouton de com-

mande.

Exécuter une commande avancée en appuyant d’abord sur le bouton

AUX

et ensuite sur un bouton de commande.

6

Tableau des commandes de la télécommande

Bouton

Appuyer et

relâcher

Bascule (appuyer/

relâcher “AUX”

d’abord)

Appuyer/maintenir pen-

dant 2 secondes

Verrouiller Aucune fonction Verrouiller, mode panique

et localisateur de véhi-

cule**

Déverrouiller Aucune fonction Aucune fonction

Bascule* Aucune fonction Accessoire optionnel**

Démarreur à

distance

Aucune fonction Aucune fonction

* Les commandes avancées sont exécutées en appuyant et

relâchant le bouton AUX avant d’appuyer sur le bouton de com-

mande pour exécuter la fonction décrite dans la colonne Bas-

cule.

** Spécifique à chaque véhicule. Veuillez-vous référer à votre cen-

tre d’installation pour de plus d’information.

En utilisant une télécommande bidirectionnelle et que la fonction

n’exécute pas lors d’une commande, une alerte sonore indiquera qu’il

y a une erreur.

7

Commandes de base

Verrouillage

Appuyer et relâcher

Les portières seront verrouillées, les feux de stationnement clignoteront

et le klaxon retentira une fois (si disponible), la télécommande bidirec-

tionnelle (7243A) émet des timbres sonores.

Verrouillage et mode panique /localisateur de véhicule

Appuyer et maintenir

Pour verrouiller le système et ensuite activer le mode panique/

localisateur de véhicule.Le mode panic/localisateur de véhi-

cule est spéciﬁque à chaque véhicule. Consulter votre centre

d’installation pour plus d’information. La télécommande bidirec-

tionnelle (7243A) émet un simple timbre sonore.

Appuyer sur le

ou pour désactiver le mode panique.

Déverrouillage

Appuyer et relâcher

Les portières sont déverrouillées, les feux de stationnement clignoteront

et le klaxon retentira deux fois (si disponible), la télécommande bidi-

rectionnelle (7243A) émet des timbres sonores.

Démarrage à distance

Appuyer et relâcher .

Activer (ou si déjà activé, désactiver) le démarreur à distance. Le

moteur se met en marche, ou s’éteint selon le cas. Si un problème de

conﬁguration de la télécommande empêche le moteur de démarrer,

les feux de stationnement clignoteront identiﬁant l’erreur de démar-

rage à distance. La télécommande bidirectionnelle (7243A) émet des

timbres sonores.

La page charge ...

Automate 4208A Le manuel du propriétaire

Ce manuel convient également à

Automate 4208A Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents