GSD WC5FM2601F Dual Band WiFi Module Manuel utilisateur

WC5FM2601F Dual Band WiFi Module
Marque
GSD
Modèle
WC5FM2601F Dual Band WiFi Module
Taper
Manuel utilisateur

Ce manuel convient également à

Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 1 OF 7
Version 1.0
WIFI Module
IEEE 802.11 a/b/g/n 2T/2R
Model Number: WC5FM2601F
Product Descrition
The WT54M2001 is a complete dual-band(2.4GHz and 5GHz)WIFI 2×2 MIMO module. This module provides a
high level of integration with a dual-stream IEEE 802.11n MAC/ base band /radio.The WLAN operation supports
20MHz,40MHz channels for data rates up to 300Mbps. It fully complies with IEEE 802.11 a/b/g/n feature rich
wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an extended distance.
Product Features
Product Specification
Model
WIFI Module
Product Name
WC5FM2601F
Standard
802.11 a /b/g/n
Interface
USB
Data Transfer Rate
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 300Mbps
Modulation Method
DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11a)
Frequency Band
2.4G: 2412~2462 MHz
5G: 5150~5350MHz,5470~5725MHz
5725~5850MHz
Operation Mode
Infrastructure
Security
WEP, TKIP, AES, WPA, WPA2
Operating Voltage
3.3V±10%
Current Consumption
＜1000mA
Antenna Type
PIFA
Operating
Temperature
0 ~ 70°C ambient temperature
Storage Temperature
-40 ~ 80°C ambient temperature
Humidity
5 to 95 % maximum (non-condensing)
NOTICE:
◆please keep this product and accessories attached to the places which children can't touch;
◆do not splash water or other liquid onto this product, otherwise it may cause damage;
◆do not put this product near the heat source or direct sunlight, otherwise it may cause
deformation or malfunction;
◆please keep this product away from flammable or naked flame;
◆please do not repair this product by yourself. Only qualified personnel can be repaired.
◆ Complies with IEEE 802.11b/g/n for 2.4GHz and IEEE 802.11a/n 5GHz Wireless LAN.
◆ Two transmit and Two receive path(2T2R)
◆ Works with all existing network nfrastructure.
◆ Capable of up to 128-Bit WEP Encryption.
◆ Freedom to roam while staying connected.
◆ UP to 300 Mbps High-Speed Transfer Rate in 802.11n mode of operation.
◆ Operating Systems：Linux,Win7, Win8, Win10,XP
◆ Low power consumption.
◆ Easy to install and configure.
◆ High speed USB 2.0 interface
◆ROHS compliant
Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 2 OF 7
Version 1.0
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Please notice that if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains FCC ID:2AC23-WC5F” any similar wording
that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
The device must be professionally installed
The intended use is generally not for the general public.It is generally for industry/commercial use.
The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not
normally required. the user has no access to the connector.
Installation must be controlled. Installation requires special training
This module has been assessed against the following FCC rule parts: CFR 47 FCC Part 15 C (15.247, DTS and DSS) and
CFR 47 FCC Part 15 E (NII). It is applicable to the modular transmitter
Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 3 OF 7
Version 1.0
This radio transmitter 2AC23-WC5F has been approved by Federal Communications Commission to operate with the
antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a
gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
The concrete contents to check are the following three points.
１) Must use a PIFA antenna such as WC0D-60 with gain not exceeding those shown in the table below.
２) Should be installed so that the end user cannot modify the antenna
３) Feed line should be designed in 50ohm
Antenna type and antenna gain:
2.4G WIFI
Antenna Group 1
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
2412 ~ 2462
PIFA
2.32
Zhongshan B&T Communication
Technology Co., Ltd
2412 ~ 2462
PIFA
2
GSD
Antenna Group 2
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
2412 ~ 2462
PIFA
1.72
Shenzhen Yishengbang Technology
Company Limited
2412 ~ 2462
PIFA
2
GSD
Note: Antenna 1 is permanently attached, can’t be replaced.
5G WIFI
Antenna Group 1
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
5180 ~ 5825
PIFA
4.13
Zhongshan B&T Communication
Technology Co., Ltd
5180 ~ 5825
PIFA
3
GSD
Antenna Group 2
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
5180 ~ 5825
PIFA
2.57
Shenzhen Yishengbang Technology
Company Limited
5180 ~ 5825
PIFA
3
GSD
Note: Antenna 1 is permanently attached, can’t be replaced.
Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 4 OF 7
Version 1.0
Original Antenna information:
2.4G WIFI:
Antenna
Frequency (MHz)
Antenna Type
MAX Antenna Gain (dBi)
0
2412-2462
PIFA
2
1
2412-2462
PIFA
2
Note: Antenna 1 is permanently attached, can’t be replaced.
5G WIFI:
Antenna No.
Frequency Band
Antenna Type
Max Antenna Gain (dBi)
0
5180~5825
PIFA
3
1
5180~5825
PIFA
3
Note: Antenna 1 is permanently attached, can’t be replaced.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d’en compromettre le fonctionnement.
Please notice that if the ISED certification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains IC:12290A-WC5F” any similar wording that
expresses the same meaning may be used.
l'appareil hôte doit porter une étiquette donnant le numéro de certification du module
d'Industrie Canada, précédé des mots « Contient un module d'émission », du mot « IC:12290A-
WC5F » ou d'une formulation similaire exprimant le même sens, comme suit
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems
for devices with detachable antenna(s), the maximum antenna gain permitted for devices in
the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p.
limits as appropriate;
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux;
Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 5 OF 7
Version 1.0
pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour
les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite
de la p.i.r.e. spécifiée, selon le cas;
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla
conformité à l'exposition de RSS-102 RF, utilisateurs peut obtenir l'information canadienne surl'exposition et la
conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne
ouémetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres
entre le radiateur et votre corps.
This radio transmitter 12290A-WC5F has been approved by Innovation, Science and Economic
Development Canada to operate with the antenna types listed below, with the maximum permissible
gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain
Le présent émetteur radio 12290A-WC5F a été approuvé par Innovation, Sciences et Développement
économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain
admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au
gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de
l'émetteur.
The concrete contents to check are the following three points.
１) Must use a PIFA antenna such as WC0D-60 with gain not exceeding those shown in the table below.
２) Should be installed so that the end user cannot modify the antenna
３) Feed line should be designed in 50ohm
Fine tuning of return loss etc. can be performed using a matching network.
Le contenu concret à vérifier sont les trois points suivants.
１) doit utiliser une antenne comme WC0D-60 avec pifa gain gain 'excédant pas ceux indiqués dans le tableau
ci-dessous.
２) doivent être installés de façon que l'utilisateur final ne peut pas modifier l'antenne
３) La ligne d’alimentation doit être conçue en 50ohm
Le réglage précis de la perte de rendement, etc. peut être effectué en utilisant un réseau correspondant.
Antenna type and antenna gain:
2.4G WIFI
Antenna Group 1
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
2412 ~ 2462
PIFA
2.32
Zhongshan B&T Communication
Technology Co., Ltd
2412 ~ 2462
PIFA
2
/
Antenna Group 2
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 6 OF 7
Version 1.0
2412 ~ 2462
PIFA
1.72
Shenzhen Yishengbang Technology
Company Limited
2412 ~ 2462
PIFA
2
/
Note: Antenna 1 is permanently attached, can’t be replaced.
5G WIFI
Antenna Group 1
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
5180 ~ 5825
PIFA
4.13
Zhongshan B&T Communication
Technology Co., Ltd
5180 ~ 5825
PIFA
3
/
Antenna Group 2
Frequency
(MHz)
Antenna Type
Maximum Antenna
Gain (dBi)
Manufacturer
5180 ~ 5825
PIFA
2.57
Shenzhen Yishengbang Technology
Company Limited
5180 ~ 5825
PIFA
3
/
Note: Antenna 1 is permanently attached, can’t be replaced.
Notice to OEM integrator
Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the
device is installed and used at distances of at least 20cm from persons.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as
show in this manual(FCC/ICanada statement).
Host manufacturer is responsible for compliance of the host system with module installed with all other applicable
requirements for the system such as Part 15 B, ICES 003.
Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter
when the module is installed in the host.
The use condition limitations extend to professional users, then instructions must state that this information also
extends to the host manufacturer’s instruction manual.
This module is stand-alone modular. If the end product will involve the Multiple simultaneously transmitting
condition or different operational conditions for a stand-alone modular transmitter in a host, host manufacturer
have to consult with module manufacturer for the installation method in end system.
Any company of the host device which install this modular should perform the test of radiated &
condicted emission and spurious emission etc. according to FCC Part 15C: 15.247 and 15.209 &
15.207, 15B class B requirement, only if the test result comply with FCC part 15C: 15.247 and
15.209 & 15.207, 15B class B requirement. Then the host can be sold legally.
This modular transmitter is only FCC authorized for the specific rule parts ( 47CFR Part 15.247
and 15.407) listed on the grant, and that the host product manufacturer is responsible for
compliance to any other FCC rules that apply to the host not covered by the modular transmitter
grant of certification.
Host manufacturer is strongly recommended to confirm compliance with FCC/ISED
Hui Zhou Gaoshengda Technology Co., LTD WC5FM2601F
PAGE 7 OF 7
Version 1.0
requirements for the transmitter when the module is installed in the host.
Must have on the host device a label showing Contains FCC ID:2AC23-WC5F or IC: 12290A-WC5F
Both FCC ID and IC ID are not to be placed on the host at the same time and only hosts going into the US can use the FCC
ID and only hosts going into Canada can use the IC ID.
Installer should put it in the manual：
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems
l'hôte doit utiliser l'instrument uniquement dans des dispositifs qui répondent à la fcc / (catégorie d'exposition rf
mobile, ce qui signifie le dispositif est installé et utilisé à une distance d'au moins 20 cm de personnes.
le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen déclarations de conformité relatives à
l'émetteur que de montrer dans ce manuel.
le fabricant est responsable de la conformité de l'hôte, le système d'accueil avec le module installé avec toutes
les autres exigences applicables du système comme la partie 15 b, ices - 003.
accueillir le fabricant est fortement recommandé de confirmer la conformité avec les exigences de la fcc /
(émetteur lorsque le module est installé dans l'hôte.
le dispositif d'accueil doivent avoir une étiquette indiquant contient FCC ID:2AC23-WC5F，IC: 12290A-WC5F
Les personnes chargées de l'installation devraient figurer dans le manuel:
Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation
à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
Doit avoir sur l'appareil hôte une étiquette indiquant Contient l'ID FCC : 2AC23-WC5F ou IC : 12290A-WC5F
L'ID FCC et l'ID IC ne doivent pas être placés sur l'hôte en même temps et seuls les hôtes se rendant aux
États-Unis peuvent utiliser l'ID FCC et seuls les hôtes se rendant au Canada peuvent utiliser l'ID IC.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

GSD WC5FM2601F Dual Band WiFi Module Manuel utilisateur

WC5FM2601F Dual Band WiFi Module
Marque
GSD
Modèle
WC5FM2601F Dual Band WiFi Module
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents