mothercare Medela New Swing Maxi Flex Double Electric Pump_0724326 Mode d'emploi

Taper
Mode d'emploi
Swing Flex
Swing Maxi Flex
EN
Instructions for use
ID
Petunjuk penggunaan
FR
Mode d‘emploi
NL
Gebruiksaanwijzing
Thank you for choosing the Swing Flex / Swing Maxi Flex breast pump. Breast milk is the natural choice for your
baby, but there are reasons and situations where breastfeeding is not possible. For over 50 years, it has been
Medela’s conviction that these mothers and babies can be supported. In close cooperation with breastfeeding
experts, Medela, one of the market leaders, has researched and developed breast pumps that perfectly meet
breastfeeding mother’s needs. For mothers who insist on the best for their babies and themselves. Because you
care.
Hartelijk dank dat u voor de Swing Flex/Swing Maxi Flex borstkolf hebt gekozen. Moedermelk is een
natuurlijke keuze voor uw baby, maar er zijn redenen en omstandigheden waarin het niet mogelijk is om
borstvoeding te geven. Medela is er al meer dan 50 jaar van overtuigd dat deze moeders en baby‘s
ondersteund kunnen worden. In nauwe samenwerking met borstvoedingsdeskundigen heeft Medela, een van
de marktleiders, borstkolven onderzocht en ontwikkeld die perfect aansluiten bij de behoeften van moeders
die borstvoeding geven. Voor moeders die het beste willen voor hun baby en voor zichzelf. Uit liefde.
Medela vous remercie d‘avoir acheté un tire-lait Swing Flex/Swing Maxi Flex. Le lait maternel est ce qu‘il y a de
plus naturel pour votre enfant, mais dans certaines situations, l‘allaitement au sein n‘est pas possible. Depuis
plus de 50 ans, Medela se donne pour mission d‘assister ces mamans et ces bébés en difculté. En étroite
collaboration avec des experts de l’allaitement, Medela a développé des tire-laits qui répondent de façon
optimale aux besoins des mères allaitantes. Ces appareils s‘adressent aux mères qui ne veulent que le meilleur
pour leur bébé et pour elles-mêmes. Parce que votre bien-être est important pour nous.
Terima kasih telah memilih Pompa ASI Swing Flex / Swing Maxi Flex. ASI adalah pilihan alami bagi bayi Anda,
tetapi situasi dan kondisi kadang membuat menyusui tidak mungkin. Selama lebih dari 50 tahun, Medela yakin
ada yang dapat dilakukan untuk membantu ibu-ibu dan bayi-bayi ini. Medela, salah satu pemimpin pasar,
bekerja sama dengan pakar per-ASI-an, berhasil meneliti dan mengembangkan pompa ASI yang benar-
benar memenuhi kebutuhan ibu menyusui. Untuk para ibu yang menginginkan yang terbaik bagi bayi mereka
juga mereka sendiri. Karena Anda peduli.
EN
435
FR
3667
NL
68–99
ID
100–131
44
1. Intended use / Population – Contraindication 5
2. Meaning of symbols 6
3. Important safety information 9
4. Product description Swing Flex 10
5. Product description Swing Maxi Flex 11
6. Cleaning 12
6.1 Cleaning overview 12
6.2 Disassemble
13
6.3 Wash
14
6.4 Sanitise
14
6.5 Cleaning tubing
15
6.6 Cleaning the motor unit
15
7. Preparing for pumping 16
7.1 Mains operation 16
7.2 Battery operation
16
7.3 Assembling the pump set
18
8. Expression 20
8.1 Swing Flex – Preparing for single pumping 20
8.2 Swing Maxi Flex – Preparing for single pumping
20
8.3 Swing Maxi Flex – Preparing for double pumping
22
8.4 Swing Maxi Flex – Preparing for hands-free expression with
the Easy Expression Bustier
24
8.5 Pumping
26
9. Storing and thawing breast milk 28
9.1 Storage 28
9.2 Freezing
28
9.3 Thawing
28
10. Troubleshooting 29
11. Warranty / Disposal 30
12. Spare parts and Accessories 31
13. EMC / Technical description 33
14. Technical specifications 34
Table of Contents
5
The intended use and indications of breast pumps
Breast pumps are intended to be used by lactating women in the hospital or home environ-
ment for expressing breast milk. Breast pumps are indicated to alleviate the symptoms of
engorgement by expressing milk. In case of mastitis breast pumps support the healing
process by removing breast milk from the affected breast. Breast pumps are indicated to
relieve sore and cracked nipples and to bring out flat or inverted nipples. Also breast
pumps enable mothers to provide breast milk for babies who cannot feed directly at the
breast for a variety of reasons such as latch-on problems, cleft palate or premature babies.
Intended patient population/user
Adolescent paediatric or adult lactating women. Many women find it convenient, or even
necessary, to use a breast pump to express and store their breast milk once they have
returned to work, are travelling or are otherwise separated from their baby. Women are
often delighted to learn that a breast pump can be used as a supplement to breastfeeding
and that some pumps are designed to mimic the suckling of a nursing baby.
Contraindications
There are no known contraindications for the Swing Flex / Swing Maxi Flex breast pump.
1. Intended use / Population – Contraindication
66
Warning
Can lead to serious injury or death.
Note
Can lead to material damage.
Caution
Can lead to minor injury.
Info
Useful or important information that is
not related to safety.
Symbols on the packaging
This symbol indicates that the material is part of a recovery/recycling process.
This symbol indicates a carton package.
This symbol indicates to keep the device away from sunlight.
This symbol indicates to handle the fragile device with care.
This symbol indicates the temperature limitation for operation, transport and storage.
This symbol indicates the humidity limitation for operation, transport and storage.
This symbol indicates the atmospheric pressure limitation for operation,
transport and storage.
This symbol indicates to keep the device dry.
This symbol indicates that the packaging contains products intended to come in contact with
food according to regulation 1935/2004.
This symbol indicates unique GSI Global Trade Item Numbers (GTIN).
This symbol indicates do not dispose the device together with unsorted municipal waste (for
EU only).
This symbol indicates to follow instructions for use.
2. Meaning of symbols
i
The warning symbol identifies all instructions that are important for safety. Failure to
observe these instructions can lead to injury or damage to the breast pump!
When used in conjunction with the following words, the warning symbol stands for:
i
7
Symbols on the device
This symbol indicates to follow instructions for use.
This symbol indicates the compliance with the essential requirements of the Council Directive
93/42/EEC of 14 June 1993 concerning medical devices.
This symbol indicates the manufacturer.
This symbol indicates do not dispose the device together with unsorted municipal waste (for
EU only).
This symbol indicates the compliance with additional USA and Canada safety
requirements for medical electrical equipment.
This symbol indicates a type BF applied part.
This symbol indicates manufacturer’s serial number of the device.
This symbol indicates the positioning of battery cell.
This symbol indicates the protection against ingress of solid foreign objects and against
harmful effects due to the ingress of water.
This symbol indicates the date of manufacture (four digits for the year and
two digits for the month).
Symbols on the mains adapter
This symbol indicates that the mains adapter is a class II device.
This symbol indicates the compliance with China Compulsory Certification.
This symbol indicates that the mains adapter is for indoor use only.
This symbol indicates the compliance with USA and Canada safety requirements.
This symbol indicates the compliance with Federal Communications Commission require-
ments.
This symbol indicates polarity of d.c. power connector.
This CE-mark indicates the compliance with the low voltage and electromagnetic compatibil-
ity directive.
This symbol indicates to not dispose the device together with unsorted municipal waste (for
EU only). The solid bar symbol indicates that mains adapter is put on the market after 13
August 2005.
88
This symbol indicates the compliance with energy efficiency requirements.
This symbol indicates alternating current.
This symbol indicates direct current.
This symbol indicates the compliance with energy efficiency requirements.
SGS
This symbol indicates that the mains adapter is safety tested.
This symbol indicates a short-circuit proof safety isolating transformer.
170053 -12
Singapore Consumer Protection Registration.
S
This symbol indicates that the electronic device incorporating transformer(s) and electronic
circuitry(ies), converts electrical power into single or multiple power outputs.
This symbol indicates the compliance with AUS/NZ requirements (regulatory compliance
mark).
TÜV
SÜD
PSB
This symbol indicates the compliance with PSE requirements (Japan, Product Safety Electrical
Appliance and Material Safety Law).
The KC mark indicates that the product meets Korean EMC and electric safety requirements.
IP20
This symbol indicates the protection against ingress of solid foreign objects and against
harmful effects due to the ingress of water.
9
3. Important safety information
Failure to follow these instructions/safety information can lead to danger from the device.
Subject to technical changes.
Separation from the mains is only
assured through the disconnection of
the mains adapter from the wall socket
outlet.
Keep the mains adapter away from
heated surfaces.
Do not reach for any electrical device if it
has fallen into water.
Unplug immediately.
The breast pump should never be left
unattended when plugged into a power
source.
Danger of electrocution! Keep the device
dry! Never immerse in water or other
liquids!
The Swing Flex / Swing Maxi Flex breast
pump is not heat-resistant: Keep away
from radiators and open flames.
Do not expose the motor unit to direct
sunlight.
Never use a damaged device. Replace
damaged or worn parts.
MAX.
275 h
The operating life of the Swing Flex
breast pump is 275 hours. The service
life is two years.
Repairs must be performed only by an
authorised service agency.
Do not repair yourself! No modifications
to the device are permitted.
MAX.
250 h
The operating life of the Swing Maxi Flex
breast pump is 250 hours. The service
life is two years.
Device
Use the Swing Flex / Swing Maxi Flex
breast pump only for its intended use as
described in this manual.
Do not drive whilst hands-free pumping.
Do not use the Swing Flex /Swing Maxi
Flex breast pump while bathing or
showering.
Supervision is necessary when the Swing
Flex / Swing Maxi Flex breast pump is used
in the vicinity of children.
Do not use the Swing Flex / Swing Maxi
Flex breast pump while sleeping or
overly drowsy.
Contact your lactation consultant or
breastfeeding specialist if you experience
problems or pain.
This is a single user product. Use by
more than one person may present a
health risk.
Portable and mobile radio frequency
communications equipment can affect the
Swing Flex / Swing Maxi Flex breast pump.
Never operate an electrical device if it has a damaged
cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water.
Use
Electrical use
1010
4. Product description Swing Flex
1x Swing Flex tubing
article 201.1079
spare part 101034002
swing
on/off button
reduce
vacuum
increase
vacuum
let-down
button
LED
Spare parts and accessories available for order can be found in chapter 12.
Swing Flex – single electric 2-Phase
breast pump
power adapter port
battery
compartment
PVC tubing port
fixing clip
1x connector
article 200.9728
1x bottle
article 811.0021
1x multi lid
article 200.2714
1x bottle stand
article 101033405
1x membrane
1x lid
breast shields:
1 x 21 mm (article 101035239)
1 x 24 mm (article 101035240)
1x motor unit:
article 600.0975
spare part 099.0015
1x mains adapter
article spare part
Euro 4.8V 201.1055 099.0016
UK 4.8V 201.1056 099.0017
AUS/NZ 4.8V 201.1057 099.0018
CN 4.8V 201.1058 099.0276
US/JP 4.8V 201.1059 101033542
KR 4.8V 101034044 101038305
11
1x bottle stand
article 101033405
1x membrane
5. Product description Swing Maxi Flex
swing maxi
on/off button
reduce
vacuum
increase
vacuum
let-down
button
LED
Swing Maxi Flex – double electric 2-Phase
breast pump
power adapter port
battery
compartment
PVC tubing port
fixing clip
2x multi lid
article 200.2714
2x connector
article 200.9728
2x bottle
article 811.0021
2x bottle stand
article 101033405
2x membrane
2x lid
breast shields:
2 x 21 mm (article 101035239)
2 x 24 mm (article 101035240)
1x Swing Maxi Flex
tubing
article 201.1087
spare part 101034003
1x motor unit:
article 200.4932
spare part 099.0270
1x mains adapter
article spare part
Euro 12V 201.1146 099.0271
UK 12V 201.1147 099.0272
AUS/NZ 12V 201.1149 099.0273
CN 12V 101032865 099.0274
US/JP 12V 201.1148 101033543
KR 12V 101034045 101038303
long tubing
tubing holder
short tubings
1212
6. Cleaning
Washing and sanitising are two different activities. They must be done separately to protect
you, your baby and the performance of your breast pump.
Wash – To clean the surfaces of the parts by physically removing contamination.
Sanitise – To kill living organisms, such as bacteria or viruses, that may be present
on the surfaces of the parts.
6.1 Cleaning overview
When to clean
Tubing
Motor unit
As needed
see chapter 6.5 see chapter 6.6
When to clean
Breast shield(s)
Connector and
membrane
Bottles & lids
Before 1st use
6.2 disassemble
6.3 wash
6.4 sanitise
6.2 disassemble
6.3 wash
6.4 sanitise
6.2 disassemble
6.3 wash
6.4 sanitise
After each use
6.3 wash
6.2 disassemble
6.3 wash
6.2 disassemble
6.3 wash
Once per day
6.4 sanitise
6.2 disassemble
6.4 sanitise
6.2 disassemble
6.4 sanitise
13
Note
Caution
Do not spray or pour liquid directly onto
the pump.
Only use drinking-quality water for
cleaning.
Take apart and wash all parts that come
in contact with the breast and breast milk
immediately after use to avoid drying up
of milk residues and to prevent growth of
bacteria.
Do not clean the tubing with Quick Clean
bags in the microwave.
Unplug the breast pump before cleaning
the motor unit.
i
The pump set requires no maintenance.
Take care not to damage parts of the
pump set during cleaning.
Do not use the breast milk if bottles
or components become damaged.
6.2 Disassemble
Remove and dispose the protective cover*
from the breast shield before first use.
Disassemble the pump set into its
individual parts (breast shield, connector,
membrane, milk bottle).
Open back cap of the connector by
squeezing both flaps.
Check all parts for damage.
Replace damaged or worn parts.
*
1414
6. Cleaning
6.3 Wash
Before first use and after each use
6.4 Sanitise
Before first use and once per day
OR
OR
Place all parts, except for the tubing,
on the top rack or in the cutlery section.
Use a commercially available dish-
washing detergent. Dry after washing.
Use Quick Clean* bags in the micro-
wave in accordance with the instruc-
tions. Dry after sanitising.
* Accessories available for order:
see chapter 12. For more information,
visit www.medela.com.
Sink Stovetop
Drying
Dry with a clean cloth or leave to dry on a clean cloth. Put the clean parts in a clean
storage bag or a clean environment. Do not store parts in an airtight container/bag if
moist. It is important that all residual moisture dries.
1. Rinse all parts with cold, clear
drinking-quality water (approx.
20 °C).
2. Clean these parts with plenty of
warm, soapy water (approx. 30 °C).
Use a commercially available
washing-up liquid, preferably without
artificial fragrances and colouring
(pH neutral).
3. Rinse the parts with cold, clear
drinking-quality water for
1015seconds (approx. 20 °C).
Dry after washing.
Dishwasher
Microwave
Cover all parts, except the tubing,
with water and boil at least for
5minutes. Dry after sanitising.
15
Note
1
To clean the motor unit, wipe the housing
with a clean, damp (not wet) cloth. You may
use drinking-quality water and a basic
washing-up liquid or a non-abrasive
detergent.
2
Additionally you may use an alcohol-based
disinfecting agent.
No visible residues
No cleaning needed.
With visible residues
1. Rinse tubing in cool water
2. Wash tubing in warm, soapy water
3. Rinse tubing with clear water
4. Shake out water droplets
5. Hang to air dry
Do not sanitise the tubing.
1
6.5 Cleaning tubing
i
If the individual components of the pump
set are cleaned in a dishwasher, parts
may be discoloured by food pigments.
This has no impact on the function.
The membrane at the connector prevents
the milk from flowing into the tubing,
however, inspect the tubing after each
pumping session for visible residues. If
there are visible residues in the tubing,
follow the instructions in chapter 6.5.
6.6 Cleaning the motor unit
1616
7. Preparing for pumping
Info
i
7.1 Mains operation
You can operate the SwingFlex / Swing
Maxi Flex breast pump via battery or
mains.
Battery operation:
The batteries do not need to be removed
when the mains adapter is used for
pumping.
Regularly check the condition of the
batteries in the motor unit.
If Swing Flex / Swing Maxi Flex will remain
unused for a longer period of time,
remove the batteries from the battery
compartment.
Batteries last for 4 6 pumping sessions
(approx. 1 ½ hours pumping time).
Plug the mains adapter cord into
the motor unit.
Mains operation:
Follow the exact order of the steps.
Only use the mains adapter supplied with
the Swing Flex / Swing Maxi Flex.
Make sure the voltage of the mains
adapter is compatible with the power
source.
Warning
1
7.2 Battery operation
1
Open the battery compartment on
the back in the direction of the arrow.
17
2
Insert four AA Mignon LR6 batteries
for Swing Flex .
Insert six AAA Micro 1.5 V batteries
for Swing Maxi Flex.
Plug the mains adapter into
the mains socket. The motor unit
is now ready for operation.
Close the battery compartment.
The pump is ready for operation
via battery.
2
3
1818
4
Info
i
Note
i
7.3 Assembling the pump set
Carry out all the steps with care and
assemble the pump set correctly. Other-
wise a good vacuum may not be
achieved.
Use Medela original accessories only.
Hold the tubing by the connecting piece
while attaching and detaching it.
All components must be completely dry
before use.
Caution
Screw bottle into connector.
Check pump set components for wear or
damage before use and replace if neces-
sary.
Make sure parts are cleaned according to
chapter 6 before assembling the pump set.
Carefully place the membrane into the
connector with the flap into the opening of
the connector.
Make sure that the membrane forms a seal
around the edge of the connector.
Wash hands thoroughly (at least one
minute) with soap and water before
touching the breast and pump parts. Dry
your hands with a fresh towel or a
single-use paper towel.
Also, bottles and component parts may
become damaged if mishandled, e.g.
dropped, over-tightened, or knocked
over.
Take appropriate care in handling bottles
and components.
1
7. Preparing for pumping
19
5 6
32
Close the lid of the connector
until it audibly clicks.
Insert the tubing into the corresponding
opening in the lid of the connector.
Insert the other end of the tubing
into the motor unit.
Insert the breast shield onto the
connector.
2020
Step 2 (chapters 8.1, 8.2, 8.3):
The product comes with two different
breast shield sizes 21 mm and 24 mm.
Answer the following questions
to find out whether the available breast
shield sizes fit:
Does your nipple rub the tunnel sides to
the point of causing discomfort?
Do you see excessive areola being pulled
into the tunnel?
Do you see any redness?
Is your nipple or areola turning white?
Do you feel unexpressed milk after breast
milk pumping?
If you answered “YES” to any of these
questions, consider trying a new size by
following the measuring instructions at
www.medela.com.
If you are still unsure that you selected the
right breast shield size, contact your
lactation consultant or breastfeeding
specialist.
See brochure “Choosing your Medela
breast shield size”.
Step 3 (chapters 8.1, 8.2, 8.3):
Do not hold the pump set by the bottle.
This can lead to blockage of the milk
ducts and engorgement.
8.1 Swing Flex – Preparing for
single pumping
8.2 Swing Maxi Flex – Preparing
for single pumping
1
Insert the unused short tubing into the
tubing holder.
1
The oval breast shield can be rotated (360°)
and placed in the desired position to have
the most comfortable fit for you.
Caution
Note
i
8. Expression
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

mothercare Medela New Swing Maxi Flex Double Electric Pump_0724326 Mode d'emploi

Taper
Mode d'emploi