SportsArt P758 Le manuel du propriétaire

P758 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 9

STEP 1 Cover Support Plate and the Connector Installation ................ 9

STEP 2 Handle Installation ................................................................... 13

STEP 3 Weight Stack Installation ......................................................... 14

STEP 4 CAM Installation ...................................................................... 18

STEP 5 Cable Installation ...................................................................... 21

STEP 6 Cylindrical Cushion Arm Installation ......................................... 25

STEP 7 Seat Bottom and Seat Back Installation ................................... 26

STEP 8 Apply the Weight Stack Sticker ................................................ 28

STEP 9 Front Cover and Rear Cover Installation .................................. 29

STEP 10 Top Covers Installation ........................................................... 31

STEP 11 Storage Tray Installation ......................................................... 32

STEP 12 Cable Adjustment ................................................................... 33

STEP 13 Stack Fork Inspections ........................................................... 34

5. OPERATION INSTRUCTION ............................................................ 35

6. MAINTENANCE ................................................................................ 37

MAINTENANCE Schedule .................................................................... 38

MAINTENANCE Task List .................................................................... 39

MAINTENANCE One-Year Maintenance Log ....................................... 40

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 41

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the P758 Lying

Leg Curl machine. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain precau-

tions apply during the use of this product. Please note the following safety precau-

tions:

• Please read the entire manual before assembly and operation. Make sure the

product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use outdoors

or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled, and all

fasteners are tightened. Do not use the product if it is disassembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear shoes

with leather soles or high heels. Tie all long hair back. Do not go barefoot on this

product.

• Keep away from moving parts. Moving parts may or may not stop immediately if

an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is not work-

ing properly, or has been dropped or damaged, contact a service technician for

repairs.

• Do not use accessories that are not specifically recommended by the manufac-

turer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with reduced

physical, sensory, or mental capabilities, or by people who are otherwise defi-

cient in product knowledge or experience. If such people use this product, they

should be given training and be supervised at all times by someone responsible

for their safety.

• Children should be supervised to ensure that they do not play on or near the

product.

• The user weight limit for this product is 227 kg, 500 lb.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR WORK-

OUT and consult your physician immediately. Work within your recommended ex-

ercise level. DO NOT work to exhaustion. Before beginning any exercise program,

you should consult with your doctor. It is recommended that you undergo a complete

physical examination.

*NOTE: Regarding the decaled resistance on the unit weight stack, the actual weight

being lifted is configured at a ratio of 2:1. Example: If the stack fork is engaged at

60KG (132LB) at the weight stack, the actual pulling weight is 30KG (66LB).

4

3. LIST OF PARTS

Box A

5

Box B

Box C

6

Box A - Main Frame Components

No. Name Qty. No. Name Qty.

A1

Weight stack top right

cover

1 A10 Cover support plate A 2

A2

Weight stack top left

cover

1 A11 Cover 1

A3 Main frame 1 A12 Pulley cover 2

A4 Cover support plate B-2 1 A13 Pulley 2

A5 Cover support plate B-1 1 A14 Rear cover 1

A6 Storage tray 1 A15 Front cover 1

A7 Stack fork 1 A16 Bracket 2

A8 Weight stack rod 1 A17 Bracket 4

A9 Cover bracket 1

Box B - User Frame Components

No. Name Qty. No. Name Qty.

A20 CAM 1 A26 Cylindrical cushion arm 1

A22 Handle 1 A27 Connector B 1

A23 Seat back 1 A28 Connector C 1

A24 Seat frame 1 A29 Ø50 Connecting board 3

A25 Seat bottom 1 A30

Ø50 Connecting board

A

1

Box C - Weight Plates Components

No. Name Qty. No. Name Qty.

A40 5kg/11lb weight plate 15 A42

Weight plate sticker

(65kg~100kg/143lb

~220lb)

1

A41

Weight plate sticker

(10kg~60kg/22lb

~132lb)

1

7

Components on the Product

No. Name Specication Notes

20 Upper stack carriage set

21

Hex head screw M10*P1.5*L30

Spring washer M10

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

23

Hex head screw M10*P1.5*L30

Washer D17*d8.3*t2

PU tube ØD12*d8*L51

Nylon hex lock nut M8

24 Guide rod

25

Round head inner hex screw M8*P1.25*L18

Spring washer M8*t2.0

Washer D17*d8*t1.5

26 Round head inner hex screw M8*P1.25*L20

Components in the Hardware Kit

No. Name Qty. Specication Notes

11

Hex head screw 8 M10*P1.5*L130

Spring washer 8 M10

Washer 16 D16*d10.2*t1.0

Nylon hex lock nut 8 M10

12 Screw soft cap 1

13 Phillips screw 6 M6*P1.0*L12

14 Screw socket 8 SGN-07

15 Mushroom top inner hex screw 4 M6*P1.0*L12

16 Mushroom top Phillips screw 8 M5*L15

17 Mushroom top Phillips screw 10 M5*0.8*L8

18 Round sticker 1 D25

19

Round head inner hex screw 2 M6*P1.0*L20

Bushing 2 D21.5*10.5

L-shaped Allen wrench 2 (M4)

L-shaped Allen wrench 1 (M5)

L-shaped Allen wrench 1 (M6)

L-shaped Allen wrench 1 (M8)

Open end wrench 2 (13*17)

Phillips-head screw driver 1

8

Components on the Product

No. Name Specication Notes

27 Axle cap Ø65

28 Mushroom top inner hex screw M6*P1.0*L15

29

Mushroom top inner hex screw M6*P1.0*L12

Spring washer M6

Flat washer D20*d6.3*t1.5

30 CAM stop plate

31 Mushroom top inner hex screw M6*P1.0*L10

32 Cable set block

33

Mushroom top inner hex screw M6*P1.0*L20

Spring washer M6

Nylon hex lock nut M6

34 Round head inner hex screw M8*P1.25*L20

38

Mushroom top inner hex screw M8*P1.25*L25

Spring washer M8

Flat washer D22*d8.2*t2

41 Mushroom top inner hex screw M6*P1.0*L12

43

Mushroom top inner hex screw M6*P1.0*L12

Washer D20*d6.3*t1.5

44 Bevelled head Phillips screw M5*L8

9

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Cover Support Plate and the Connector Installation

10

(a). Insert the screw sockets (14) into place in the main frame (A3) as

shown, and then use the screws (15) (16) to secure the brackets (A16)

(A17) in place.

(Note: The bracket (A16) must be secured to the top of maim frame as

shown.)

(a)

11

(b). Use the screws (17) to secure the cover support plates (A10) to the

straight frame of the main frame (A3) and then secure the cover

support plates (A4) (A5) to the both side of the curved frame as shown.

(Note: The cover support plates must be secured outside of the bracket

(A16) (A17).)

(b)

12

(c). Use the screws (11) to secure the connecting board (A29) (A30) to the

connector (A27) (A28), the main frame (A3) and the seat frame (A24).

13

STEP 2 Handle Installation

(a). Loosen and remove the screws (21) from the handle (A22).

(b). Secure the handle (A22) to the seat frame (A24) wirh the screws (21).

(a)

(b)

14

STEP 3 Weight Stack Installation

15

(a). Hold the upper stack carriage set (20), and then cut the zip tie. Gently

lower the upper stack carriage set (20) into place as shown.

(b). Remove the screws (23). Set the guide rod (24) downward into place as

shown.

(c). Tilt the guide rod (24) backward and then lift the upper stack carriage

set (20) off the guide rods as shown. Carefully set the upper stack

carriage set (20) aside.

(c)

(a)

(b)

16

(d). Loosen and remove the screws (25) from the stack fork (A7) and insert

the weight stack rod (A8) into the central mounting position of the upper

stack carriage set (20). Use the screws (25) to secure the stack fork

(A7) into place of the upper stack carriage set (20) as shown.

(Note: Remove the stack fork first before assembling.)

(e). Insert and lower the (5 kg/11lb) weight plates (A40) into place on the

guide rods (24) one at a time. Once complete, slide down the upper

stack carriage set (20) on top of the weight stack.

(Note: The convex side of weight plate should face up and the stack

fork (A7) points toward the front.)

* If there is an optional (7.5kg/16.5lb) weight plate installed, insert the

optional weight plates first before the (5 kg/11lb) weight plates (A40).

(e)

(d)

17

(f). Tilt the guide rods (24) back into place and then lift them up to their

mounting position, and then secure the assembly with the screws (23).

(f)

18

STEP 4 CAM Installation

19

(a). Loosen and remove the screw (26) and the cap (27) from the CAM

(A20).

(b). Place the CAM (A20) horizontally into its mounting area, and then

rotate the cam so that the rotator arm is pointing downward as shown.

(Note: Due to the CAM hasn’t been connected to the cable yet, to avoid

any injuries, please make sure no one is near the CAM.)

(c). Secure the axle cover (27) in place with the screw (26), and then apply

the round sticker (18) as shown.

(Note: The stopper must be rested below the tube as shown.)

(a)

(b)

(c)

20

(d). Loosen and remove the screws (28) from the CAM mounting area.

(e). Secure the cover (A11) with the screws (28).

(Note: The bakelite must be rested below the cover as shown.)

(e)

(d)

La page est en cours de chargement...

SportsArt P758 Le manuel du propriétaire

SportsArt P758 Le manuel du propriétaire

dans d''autres langues

Documents connexes